Old VHS tape to DVD

I have a old VHS tape that I made but want to put it on A DVD or CD. Is there anything cheap that I can get so I can transfer it to my computer and burn it from there? Its only about 15 minutes long so its not really a big deal but not sure on how to go about it. Any ideas?

Hi
Using the Camera is a great way and best quality (my opinion) and a rather
straight forward way to do it.
Using DVD disc as an in between - works but reduces quality.
Only thing to know about using a miniDV tape Camera is:
• The Camera must have Analog-in. Often limited in EU due to tax as a VCR.
• You need a SCART-plug that has an in/out switch so that the VCR can deliver
to the analog in on the Camera.
Yours Bengt W

Similar Messages

Backing up old VHS tapes on dvd

Dear friends
I have decided to back up a small part of my vhs library via dvd
I have Toast, DVD2one and the i-life set of apps to help me
I am importing via eye tv and need to convert the files to a format capable of being burnt wherever appropriate and as quickly as possible.
What I have experimented with so far is very long-winded, ie export to imovie, export to toast, encode and burn. This may take some 8 hours!
Does anyone have a quick fix available?

Skip the iMovie step. Use EyeTV to Import in MPEG-2 format, edit, and send the output directly to Toast (using the "Toast" button). Assuming use have one of the EyeTV units with hardware MPEG-2 encoding (EyeTV 200 or 250), there will be no software encoding, or re-encoding, in the entire process.

Copying old VHS tapes

AAAAAARRRRRRGGGGGHHHHH!!!!
My wife volunteered me to copy her aunts crappy old VHS tapes to DVD. In order to do this, I have to capture the footage and then output it (I really should have gotten one of the stand alone recorders),
The problem is, even though I am running the VHS player through my Sony DVC deck, every time there is a hiccup in the VHS tape, FCP stops the recording! I have set the user settings to not stop on a timecode break (even though there is no timecode). I am capturing using a non-controllable device. Yet by the end of one tape, I have 20 clips, and of course, it also means I have to sit and babysit in case it stops partway through the tape. Is there any way to get around this madness!?!?!
Also, I tried capturing using Quicktimes recording feature, but this kept stopping as well!!

1
To Play back analogue video with a signal that is good enough to copy reqyuires a Time Base Corrector. This is a device that stabilises the inherent jitter caused by tape players, replacing the sync signals with good quality sync. The resultant signal is then stable enough to record.
you can buy a domestic version of this, which can be used with a DVD REcorder:
http://cpc.farnell.com/cyp/ctb100/time-base-corrector/dp/AV11954?_requestid=5518 23
there is a combined TBC and analogue video to Firewire converter which can be used to digitise the VHS for editing with Final Cut:
http://desktop.thomsongrassvalley.com/products/ADVC300/index.php
2
If you buy a Panasonic recorder you can set the firstplay to 'track' which will only playback the video content without menus.
Message was edited by: Gary Scotland

How can I view DVD's that I dubbed from old vhs tapes? I finalized them and can play on other DVD players but not my IMac. Is there a specific program?

I dubbed DVD's from old VHS tapes. I finalized them and can play tehm on differant DVD players, but on my IMac I can't play them. Ultimately I want to create home movies with pics, but how can I play the DVD's?

A DVD is a DVD, unless it's been authored in a non-standard way. When you insert it in your Mac, do you at least see the disk appear on the desktop? Does it have a VIDEO_TS folder in it, containing various files?
If you open DVD Player manually (from the Applications folder), does it see it and start playing? If not, try downloading VLC (free) and see if that works.

Device for importing old VHS tapes into Mac to edit and make DVDs

Having tried one device unsuccessfully, we're looking for a device that we can use to convert old VHS tapes so we can edit in iPhoto/ Movie and store on DVDs. The one we tried came from the Apple retail store, but the Genius Bar was not able to get it to work. Thanks.

Here is how I do that (this only works with non-copy protected videos):
Connect the VHS tape player via RCA cables to an analogue-to-digital converter like, for example, the Canopus ADVC110.
Connect the converter via firewire to your Mac.
Import into iMovie as DV stream (I use iMovie 6). Edit out irritating commercials (from TV programs) and other glitches.
Convert to standard DVD format of mpeg2 in iDVD and burn to reliable media like Verbatim DVD-R.
Job done!

Import VHS Tapes to DVD and iMovie

I have many old VHS tapes I want to finally digitize so I don't lose them. Most are old football games, generally between 1-2 hours per tape. I am working off of a new iMac - 27inch 3.1gHz 1TB hard drive.
I want to do 2 things:
1 - Backup each tape to a high quality DVD for backup purposes - to be played in a DVD player
2 - Store lower quality versions on my iMac hard drive to be viewed/ edited/ possibly uploaded to YouTube or other web based video sites
I have iMovie, and would like the ability to edit if possible - nothing major, ading scores, dates, etc...and possibly manipulating video (cropping of scenes, etc...) but not much.
I have researched and found a few different options. Most threads I have read seem to indicate the need for one of the following:
Canopus ADVC300
Canopus ADVC55
Elgato Eye TV Hybrid
I am willing to spend $100 - $200, but this I'd rather not go crazy. At a certain point it would just be easier to sed them away to be professionally archived to DVD.
Any advice?

I have many old VHS tapes I want to finally digitize so I don't lose them.
I have done lots of that.
To get your VHS video into iMovie, use the Grassvalley ADVC300. With the ADVC300 Audio and Video go in, FireWire comes out. It also comes with a nice Macintosh application that works flawlessly with iMovie 06 and iDVD 09/11 (I have used it a few times with iMovie 11).
The program that comes with the ADVC300 has some nice filters that can improve video and audio of the source material. The ADVC300 will take Audio and Video from any source (VCR, Tivo, Satellite Receiver) and convert it to FireWire (iMovie will treat it like a camera).
http://www.grassvalley.com/products/advc300
I would use iMovie 06 with iDVD 09/11, why?
iMovie 09/11 uses 'single field processing' meaning every other horizontal line of the video is thrown out, which reduces the sharpness of the footage. iMovie 06 uses ALL of the image to form the video.
If your primary workflow is editing DV clips and making DVDs, iMovie '06 is better suited.
Your movie will arrive at iDVD in DV format, which is an ideal match for making a DVD: same resolution, same pixels aspect ratio, and original quality. If you share your movie from iMovie 09/11, it gets re-rendered at 640x480 or less, and then iDVD upscales it back to 720x480. The end result is obviously not as good.
iMovie 06 and iDVD 11 is a "lossless" combination.

Capturing from old vhs tapes

I want to capture a bunch of old VHS tapes into CS6. I have an analog to digital converter that I'm going to plug a VCR into and a Firewire cable from the converter into my computer.
1.) Can anyone recommend any general settings for making sure I get the highest quality possible?
I'm looking at using the following settings:
Sequence Preset
DV - NTSC
Standard 48kHz
and then going to:
- File > Capture
- Press play on the controller at the bottom of the window
- Press record on the controller at the bottom of the window
Any advice will be greatly appreciated!

There are a few ways to take care of this. One is to crop the 2 pixels from the top and the 2 from the bottom from the source when you export. If you do that, you can scale it up a bit to take care of it, or stretch to fit. Either way, it is unlikely to be noticeable since the analog wasn't picture perfect to begin with. Or, you can just leave the black above and below. Hardly noticeable at all - depending on how you display it. If you put it full size on a white web site then it is a problem. Playing it out on a DVD is not problem at all. Nobody sees that far to the edge on most TVs anyway. Although more and more they show the entire picture.
Basically, I suggest that you capture a few seconds of video and play around with it before you get too far into the project. You might not even have the noise.

Lenovo IdeaCentre B520 - Plug in a Vhs and record my old vhs tapes!

Hi!
Besides of all i want to thank you for the time you gonna lose to read this post.
I bought a lenovo ideacentre B520 and i want to record my old vhs tapes.
I plug in the VHS into the AV in ports (yellow, red and white) and then i switch in the monitor to the av mode.
I can see the vhs tape in my computer but the problem is that i cant control the pc mode. I'd like to know how can i record the vhs tape in Av mode.
Thanks for the help, and sorry my english writing...
Cesar

You'd need to tell us what kind of film and cameras you have. I think you'll need to buy some equipment to do that.
An alternative is to send your film to a place like Integrated Imaging and they could transfer it to DVD or another suitable format for iMovie.

Rip old VHS tapes onto Computer (possible?)

I wanted to know if it is possible to take old home movies, say from the 80's and somehow get this VHS footage onto my computer. Is there a firewire/usb device I could buy just for this function?
I don't have a video camera.

Seeing as my parents have a horrible DVD player, couldn't I just buy a decent DVD recorder/player (I can find some for about $100) and just record my vhs tapes onto DVD and then rip the DVD content onto my computer? It would involve a purchase of the recorder but I could justify it as a xmas gift to my parents.
I would call that a Hattrick!
I do own such a device, some Pioneer HD/DVDstandalone corder... excellent! it offers some basic editing, even import via firewire (camcorders); ok, the DVDmenus look horrible! ("design" is a cultural determined thing...); and I do record my TVprogram for a week and watch later, no ads... or, I use excessively that time-shift feature: my favorite show (CSI) starts exactly, when it's nighty-nighty time for my son... so, daddy watches 20min later
as often said here: imports from DVD are lossy, a process of high computation (=time), less convenient... but.. for a "private" project? and a new, state-of-the-art dvd player as a gift? perfect!
here's my list of apps for converting DVDs >> dv (iMovie)
DVDxDV (free trial, 25$, Pro: 90$)
* Apple mpeg2 plugin (20$) + Streamclip (free)
* Cinematize >60$
* Mpeg2Works >25$ + Apple plug-in
* Toast6/7 allows converting to dv/insert dvd, hit apple-k

Old VHS tapes to digital on iMac

I applogize if this is the wrong forum buit I couldn't figure out where else to post. I have a 1 week old iMac G5 and want to import old family VCR tapes to it. I heard of Eye TV but $300 plus is awfully steep for a one time use. I am not planning on using my iMac as a DVR or anything. Is there anything cheaper? I just want to convert some VHS tapes to DVD.

A couple of related threads:
Philip Hurrell, "Connecting VCR to imac G5", 06:28am Aug 4, 2005 CDT
tom manforte, "VHS to DVD -What do I need?", 04:39pm Jul 6, 2005 CDT

Capturing old VHS tapes

Hello.
Can anyone out there tell me the best way to capture old VHS tapes on to my imac? i.e. what software is best to use? What format is best? Best way to clean up the tapes/ machine before playing them? Basically any little tip and tricks for a good result.
I have searched and googled but cannot find information relavent to my set up. I have already imported quite a few tapes and the results vary from not too bad to terrible.
I would say that I have about 30 tapes that I want to go through and take bits from and am willing to give up a lot of time but only if the results are worth it. So far that has not been the case.
The set up I have at the moment is:
Hitachi VHS recorder (good one at the time)
Canopus advc-55
27" imac i7.
Also have Final Cut Express installed but find the capture/ achiving far easier in imovie.
Any help appreciated,
Pat.

Hi
Canopus advc-55 - should work OK
I use a Canopus ADVC-300 as this has two important (to me) features
• TimeBase correction - mend's small drop outs
The Capture doesn't halt
Audio is keept in sync - even when drop out frames
• Picture enhanzing
Then I prefer to use
• iMovie HD6 - and this set to Capture NOT in a cut up version as then drop out frames will trigger new clips (called save as individual clips in iMovie HD6 pref - I turn it off)
Else I don't need anything else.
Capturing in FinalCut Express or Pro - is more problematic to me as they are much more sencitive and halt's Import much easier. (Much more baby-sittings) - my notes on this following.
Analog to Mac/Digital
From
• S-VHS, VHS, VHS-C - Camera or VCR (VHS-C needs adaptor cassette - SVHS/VCR in such cases)
• Video 8, Hi8 ...........................................( Camera / Digital8 Camera or special VCR-player )
Can be done via
• Camera and tape or video trough (if present) (miniDV or Digital8)
• A/D-box
    Several brands (Must be FireWire)
        Canopus ADVC-55 (now Grass Valley ADVC-55) - (only on way)
        Canopus ADVC-110 (now Grass Valley ADVC-110) - (two ways)
        Canopus ADVC-300 (now Grass Valley ADVC-300) - (Timebase/code-correction)
        EyeTV
• VCR --> DVD (result needs conversion to be of use)
Captured/Imported by
• iMovie 1 to HD6
• iMovie’08 & 09 & 11
• FinalCut Express or Pro
• Final Cut Pro - X ( iMovie’11 Pro? )
• QuickTime Pro
• iDVD
SCART - Must use an SCART-adaptor with in and out switch. The one that came with Camera is one way. Camera ----> VCR/TV - not other way around.
RCA - Connect right way around
USING the S-Video out than RGB-video (Composite) from SCART will give a significantly better result !
Why
• Want to do a DVDs
• Want to edit
Connect VCR to A/D-box via SCART---RCA (EU) or via RCA---RCA (US) and set SCART switch to out (if used). The A/D-box may have an in resp. out side. Connect to in-side. Set A/D-box Input selector to Analog in.
My ADVC-300 has two sets of dip-switches on bottom - for PAL they are set to
Left one number 6 is set to on - all others in off state.
If 6 in off state then it is NTSC
From A/D-box via FireWire 6-pin to 6-pin or 9-pin end to Mac FW port.
Now turn A/D-box or Camera ON
Start iMovie or QT or FinalCut
Select Import or Capture
Re-wind tape in VCR or Camera
Start - Play on VCR or Camera
Import or Capture Now
See that the saved movie is collected on a hard disk with sufficient space
1 hour needs 13.5Gb
8 hour needs 105-110Gb (e.g. a 240VHS tape recorded in LP-mode)
How to store the material
• As is - Icon with a Star on it (iMovie HD6)
• As a set of DVDs
• Collected in a folder - FinalCuts Scratch folders + Movie document on an external/second hard disk
• As DiskImages
• Back to miniDV tapes
Do not use LP-mode with miniDV tapes. Two major problems.
a. When Camera dies - so does the tapes - Can’t be play-backed securely on other Camera even if
brand and type number is the same - the tolerances are to small
b. Audio goes out of sync due to 12-bit recording and/or drop outs in video makes video and audio
not walk in pace / parallel. Resulting in a very tough re-sync problem.
Yours Bengt W

Is there a way to import videos from old VHS tapes so that they can be later accessible to processing with imovie?

Is there any way to import videos from old VHS tapes so that thry can later be processed by imovie?

I recently got a new iPhone, and after restoring all my stuff from my old iPhone via the iTunes restore thing, I had to put all my music on manually, instead of it being restored.
iTunes content is not included with your iPhone's backup - no music, movies, tv shows, podcasts, audio and print books, tones, and apps. All iTunes content must be transferred back to your iPhone when restoring. If you sync music with Sync Music selected under the Music tab for your iPhone sync preferences with iTunes, music is transferred back to your iPhone from your iTunes library when syncing - syncing is followed after the iPhone is restored. If you manually manage music and videos with this selected under the Summary tab for your iPhone sync preferences with iTunes, you must manually drag all music from your iTunes library back to your iPhone. Manually manage music means manually all the way.

Can I convert my VHS tapes into DVD using iMAC?

How can I convert my VHS tapes into DVD by using iMAC?

From VHS to DVD
http://www.macworld.com/article/1030972/fromvhstodvd.html   <<< click here.
How to Convert a VHS to a DVD for Mac OS X
http://www.ehow.com/how_6515774_convert-dvd-mac-os-x.html   <<< click here.
Roxio unveils VHS to DVD converter for Mac
http://www.macnn.com/articles/09/05/26/roxio.vhs.to.dvd/   <<< click here.
How to Convert VHS to DVD on Mac OS X
http://www.daniusoft.com/tutorial/burn-vhs-to-dvd-on-mac.html   << click here.

How best to save VHS tapes to DVDs using a Mac ?

I have over 30 VHS tapes, eight Hi-8 tapes, and a player for both formats. Would like to make DVDs of these movies. There are a few USB adapters (Elgato Video Capture for $100, KWorld DVD Maker 2x for $28) and Roxio makes Easy VHS to DVD 3 Plus for $60. Have looked through AV forums on other websites and the directions are not concise, and are aimed at the PC platform. Prefer to use a Mac.
What is the fastest, easiest, and best way to save these VHS tapes to DVDs using a Mac ?

Frank Caggiano wrote:
Are you sure neither player has a digital output? FireWire would be the most likely connector on that type of equipment.
Both VHS & Hi-8 are analog tape formats so it is extremely unlikely that VHS players or Hi-8 camcorders would have built-in analog to digital converters. That's why you need a product that includes a hardware A-D converter like the three mentioned by the OP.
Roxio's Easy VHS to DVD 3 product is for Windows -- there is no software compatible with OS X included. The Easy VHS to DVD for Mac product does include OS X compatible software but it gets poor reviews at Amazon, has apparently not been updated in some time, & the support page for the product has some "page not found" links suggesting Roxio isn't currently supporting the product very well.
The KWorld DVD Maker comes with a software driver for its A-D converter, which apparently uses a Empia 28xx family chipset. According to this that driver will not work with recent OS X versions, but for $30 one can purchase the VideoGlide driver to solve that problem. The KWorld product does not include OS X compatible editing software; for that you use iMovie (& presumably Toast or iDVD or something else) to burn the movies to DVDs. That makes the price about the same as the Roxio solution but complicates support because hardware & software are coming from different companies.
The Elgato Video Capture product should be compatible with most OS X versions (but I could not find anything specifically about at beyond the typical "10.5 & above" kind of comment which may or may not mean it supports 10.8 or 10.9) but it captures to H.264/MPEG formats only, so like the KWorld you still need something to convert that to MPEG 2 to burn the captures to a standard DVD.
So basically, there is no easy "one step" method to transfer VHS (or any of the other analog video formats) to DVD's. Depending on the version of OS X in use, it should be fairly easy to convert the analog source material to a digital format that can be used with iTunes, iMovie, etc., but editing it & particularly burning that to a DVD that will play in a regular DVD player will take more work.

Convert VHS tape to DVD or flash drive

I would like to convert home movies that are on a VHS tape to DVD, and then to a flash drive or USB stick

convert a vhs tape to digital
I have done lots of that.
To get your VHS video into iMovie, use the Grassvalley ADVC300 (much better than the roxio easy vhs to dvd). With the ADVC300 Audio and Video go in, FireWire comes out. It also comes with a nice Macintosh application that works flawlessly with iMovie 06 and iDVD 09/11 (I have used it a few times with iMovie 11).
The program that comes with the ADVC300 has some nice filters that can improve video and audio of the source material. The ADVC300 will take Audio and Video from any source (VCR, Tivo, Satellite Receiver) and convert it to FireWire (iMovie will treat it like a camera).
http://www.grassvalley.com/products/advc300
I would use iMovie 06 with iDVD 09/11, why?
iMovie 09/11 uses 'single field processing' meaning every other horizontal line of the video is thrown out, which reduces the sharpness of the footage. iMovie 06 uses ALL of the image to form the video.
If your primary workflow is editing DV clips and making DVDs, iMovie '06 is better suited. Your movie will arrive at iDVD in DV format, which is an ideal match for making a DVD: same resolution, same pixels aspect ratio, and original quality.
If you share your movie from iMovie 09/11, it gets re-rendered at 640x480 or less, and then iDVD upscales it back to 720x480. The end result is obviously not as good.
iMovie 06 and iDVD 11 is a "lossless" combination.

Old VHS tape to DVD

Similar Messages

Maybe you are looking for