"Older Generation of Printer" Message

I have just replaced the Black 61 XL cartridge in my Envy 4500 All-in-One.  I removed the old/spent cartridge, which had been working fine, and replaced it with a new identical purchased-at-the-same-time cartridge.  I now get a message that says, "Cartridge for older generation of printer."  These are both remanufactured cartridges.  

The cartridge that works and the one that does not are not likely identical.  As noted in my previous post there were some changes made in 2012.  Cartridges with an expiration date earlier than April 1, 2014 are the older generation cartridges.  What are the dates on the "good" and "bad" cartridges?
If the cartridge has been removed from the packaging and opened, check the Warranty Ends date on the cartridge.
HP 61 and HP 802: if the Warranty Ends date is 2014/04/01 or later, then the cartridge is the updated version.
HP 122 and HP 301: if the Warranty Ends date is 2014/07/01 or later, then the cartridge is the updated version.
Figure 2: Cartridge
1 - Warranty Ends date
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • Photsmart 5520 gives message cartridge for older generation of printer

    I only use hp cartridges and these are all 364 as used on my previous 5520!
    But the message says cartridge for an older generation of printer
    Help

    Hi,
    The HP 364 ink cartridges only have the warranty end date listed on it, it never list a manufacturing date.
    Follow the guidelines below, the Do I have the updated cartridges? section explain how to identify an updated cartridge, either with its packing material or without it:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02435884
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Print message print cartridge cannot move because of paper jam but the paper jam has been cleared.

    My Envy 4502 printer message window says that the print cartridge cannot move and to clear any paper jam obstruction.  There was a paper jam and I cleared it but the message "the print cartridge cannot move and to clear any paper jam obstruction" remains there and I cannot remove it or get the printer to print.  I tried everythng listed in the troubleshooting section of the help guide in the software.  I uninstalled the printer and then reinstalled it which didn't help  in the slightest--the message about the print cartridge is still there.  I also tried unplugging the printer overnight (to try to clear the memory)  and this also did not help--that message is still there.  By the way, I can easily move the printer cartridge by hand and I can hear the cartridge moving when the printer attempts to work.  I would appreciate any help from anyone to get my printer to  work again!

    Hi Cat2c,
    Welcome to the hp support forum,
    Thank you for your query.
    Please find steps to remove paper jam.
    Hope this helps
    I am a HP Employee.
    The opinions expressed here are my personal opinions, not of HP.
    Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.
    Click on Thumbs up if my post helped you.

  • OfficeJet 6700 - "Unable to communicate with printer" message after install

    I am on a hybrid network with Windows 7, 64-bit. Printer is hard-wired to the router (ethernet) but laptops are wireless. Installation doesn't allow for a hybrid option, just wireless or wired, so I installed as wired.
    I just installed the OfficeJet 6700 - installed OK.  I also updated software/firmware during the install process.
    Windows' "Devices & Printers" recognizes the HP as being installed.
    Printer is able to produce the network configuration page, etc. so we know the printer is functional, but when I try to print I get an "Unable to communicate with printer" message.
    Windows' "Devices and Printers" troubleshooter thinks the driver is not installed, but as I mentioned, I just installed software from the CD.
    UPDATE: I was able to install & print without problems on my wife's Win7, 64-bit laptop. Something about mine seems to be the issue. Also, HP Print & Scan Doctor reports that everything checks out OK, but when I try to print a test page at the end of the good doctor's diagnosis, I am still "unable to communicate with printer."

    Sorry this is so long, but I tried to be through in my testing.
    Followed your suggested steps.
    I had previously set a static IP address, but just to be thorough, re-set it again with the same address.
    I unplugged the USB cord from the laptop.
    I began with the device labeled "HP OfficeJet 6700 (Copy 1)," which was set as the default printer.
    After entering the IP address & clicking Next, it searched the network and returned this message:
    Additional port information required
    The device could not be identified.
    The device is not found on the network. Be sure that:
    1. The device is turned on.
    The network is connected.
    The device is properly configured.
    The address on the previous page is correct. (re: the page where the IP address is entered)
    If you are sure the address is correct, select the device type below.
    I selected Standard (Generic Network Card) and clicked Next.
    Summary dialog appeared and I clicked Finish.
    Clicked OK/Apply.
    Attempted to print. Like before, it sent the file to print queue - then nothing.
    Right-clicked on the "Copy 1" device and selected Troubleshoot. Returned the message: Make printer "Fax HP OfficeJet 6700 the default printer" - even though this copy is already the default printer. (Usually when the original copy is set as the default, this copy is automatically re-named "Fax HP OfficeJet 6700.") I chose "Apply this fix."
    Summary page said "Troubleshooting has completed." I closed the troubleshooter and attempted to print. I closed the Devices & Printers window so it could refresh. Re-opened Devices & Printers. Now the default printer is named "Fax HP OfficeJet 6700." The other device is grayed out and is simply named "HP OfficeJet 6700."
    Attempted to print. (I'm testing w/ Notepad and .txt files)
    I have 3 choices in the Notepad's printer dialog box but only 2 devices showing in the Devices & Printers window:
    ~ "Fax HP OfficeJet 6700" - This is the default printer in the Devices and Printers window. I clicked on Print & rec'd an error message: "Send Fax - HP Officejet 6700. There is a problem communicating with the Printer. Check your USB connection & verify that the printer is ready." Notepad's print dialog box shows status as Offline. I canceled all documents in the print queue.
    ~ "HP OfficeJet 6700." When I choose this printer option, Notepad's print dialog box shows status as "Paused - Offline." I clicked on "Print" anyway, and like before, it sent the file to print queue - then nothing. This is the printer that shows as grayed out in the Devices & Printers window. I canceled all documents in the print queue.
    ~ "HP OfficeJet 6700 (Copy 1)." There is no printer by this name in the Devices and Printers window even tho' it shows in Notepad's print dialog box. Notepad's print dialog box shows status as "Ready." In Devices & Printers, when I right-click on the one labeled "Fax OfficeJet 6700" (the default device) and choose "See what's printing," 2 HP devices are listed - the one labeled "Copy 1" and the one labeled "Fax." I clicked on "Print" and like before, it sent the file to print queue - then nothing. I canceled all documents in the print queue.
    I plugged in the USB cord again and re-ran the same series of tests.
    ~ "Fax HP OfficeJet 6700" - This is still the default printer in the Devices and Printers window. Notepad's print dialog box shows status as "Ready." The fax window opened, waiting me to enter the recipient's name, add a cover sheet, etc. I closed the fax window. The .txt file was in the print queue for the "Fax" device, so I canceled all documents in the print queue.
    ~ "HP OfficeJet 6700." When I choose this printer option, Notepad's print dialog box shows status as "Paused - Offline." I clicked on "Print" anyway, and like before, it sent the file to print queue - then nothing. This is grayed out in the Devices & Printers window. I canceled all documents in the print queue.
    ~ "HP OfficeJet 6700 (Copy 1)." Again, there is no printer by this name in the Devices and Printers window even tho' it shows in Notepad's print dialog box. This is one of 2 choices in the device labeled "Fax" - the default device. Notepad's print dialog box shows status as "Ready." I clicked on "Print" and like before, it sent the file to print queue - then nothing. I canceled all documents in the print queue.
    Next, I used the printer's touch screen interface and turned the wireless connection off, leaving the USB cord plugged in.
    ~ "Fax HP OfficeJet 6700" - Status: Ready. The fax window opened, same as before. I closed the fax window & canceled all documents in the print queue.
    ~ "HP OfficeJet 6700 - Status: Paused - Offline. I clicked on "Print" anyway, and like before, it sent the file to print queue - then nothing. This one shows as grayed out in the Devices & Printers window. I canceled all documents in the print queue.
    ~ "HP OfficeJet 6700 (Copy 1)" - Status: Error. I clicked Apply, then Print. Again, this is one of 2 choices in the device labeled "Fax" - the default device. Like before, it sent the file to print queue - then nothing. I canceled all documents in the print queue.
    Reconnected to the wireless network & verified that the IP address had not changed.
    Tried again to print using "HP OfficeJet 6700 (Copy 1)" - Status: Ready. I clicked Print and again, it sent the file to print queue - then nothing. This is still listed as one of 2 choices in the device labeled "Fax" - the default device." Like before, I canceled all documents in the print queue.
    Next, I right-clicked on the one labeled "Fax OfficeJet 6700" (the default device) and choose "See what's printing" and selected the device labeled "HP OfficeJet 6700 (Copy 1)." In the print queue window, when I click on "Printer, one of my options is "Set as Default Printer." As soon as I did that, the device in the Devices & Printers window was renamed as "HP OfficeJet 6700 (Copy 1)" - no longer named "Fax." I tried to print again. Once again, file was sent to the print queue but never printed.

  • Older generation ipod touch and want to move it's acct from one computer to new computer and can't figure out how?

    We are transferring all our iTunes songs to a new computer do to space issues on old one.  My daughter's ipod touch is an older generation and she cannot connect to the new computer without wiping out her current itunes songs and rebuilding them on her ipod.  She doesn't want to do that do to time constraints.  Does anyone know how to get around this ?  Thank you.

    This is true.  Ipod touch will sync with one and only one computer at a time.  If you sync to another it will indeed erase the current content and replace with content from the new computer.

  • How to print message in oracle rdf report output?

    Hi,
    There is a requirement to print message in output of oracle rdf report. srw.message prints the message in log file but how to print message in output.
    Please suggest.
    Thanks & Regards,
    Sunita

    897745 wrote:
    Hi,
    We are trying to print BARCODE for Order Number in RDF report. Kindly let me know how to do this.It's very easy. Download a font which show barcode then choose your desire field's font that font. I use IDAutomationHC39M font.
    Hope this will help you.

  • Printing messages in Log File and Output File using Dbms_output.put_line

    Hi,
    I have a requirement of printing messages in log file and output file using dbms_output.put_line instead of fnd_file.put_line API.
    Please let me know how can I achieve this.
    I tried using a function to print messages and calling that function in my main package where ever there is fnd_file.put_line. But this approach is not required by the business.
    So let me know how I can achieve this functionality.
    Regards
    Sandy

    What is the requirement that doesn't allow you using fnd_file.put_line?
    Please see the following links.
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Dbms_output.put_line+AND+Log+AND+messages&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=%22dbms_output.put_line+%22+AND+concurrent&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Upgraded to 11.3.1 now can't open library. Won't read. I have an older iMac (2008). Message I get is: cannot be read because was created by newer version of iTunes. Would you like to download iTunes now?' ... so I do and it fixes nothing. OS 10.6.8

    Upgraded to 11.3.1 now can't open library. Won't read. I have an older iMac (2008). Message I get is: cannot be read because was created by newer version of iTunes. Would you like to download iTunes now?' ... so I do and it fixes nothing. Same message again. OS is 10.6.8.

    Thanks again. The option thing got me further than I've gotten thus far but when I went to choose a library I got that same message.
    I do have options. I have 2 iMacs. I can still access my music through 'sharing' and download it onto my newer iMac. Trouble is it doesn't have a CD port and I like to burn. From what I've read about their new Mac portable CD/DVD drive, it's shaky at best. Incidentally, do you know of any drives that work well with Macs and cost less than $89.00?
    I've figured out I can download a previous library from my old Mac then upload it from the new one which should put me back in business, but what do I do with the corrupt one that's there now, just trash it? Also, when I do the option key my other choice is Create A New Library. Should I do that and put the good previous library into it?
    Thanks a million, I really appreciate your time. I'm an old fogey and computers often mystify me, especially when they lock me out of things for no apparent reason.

  • AirPlay Compatible with older generation AirPort Express?

    Hi everyone,
    We are building a new flat and I am planning on installing ceiling speakers into each of the rooms. I will have the speakers connected into Airport Express units so that I can stream audio to different rooms.
    Question, the older generation (2004/2005, M9470LL/A) model Airport Express was compatible with AirTunes. Is it also compatible with streaming audio through AirPlay? Or does this ONLY work with the new AirPort Express (802.11n model)?
    I am running a 802.11g (and ethernet) network currently so don't require the new 802.11n function of the new AirPort Express, would prefer to go with the cheaper option and buy the older generation if it is compatible with AirPlay.
    Thanks!

    AirPlay requires that the AirPort Express Base Station run 7.4.2 or later firmware. In turn, this version of firmware can only run on the 802.11n base stations ... so, the older 802.11g Express will not fully support AirPlay.

  • Printing messages in invoices and credit notes

    Hi Sap gurus,
    The printing messages in invoices and credit notes must be changed due to a new law.
    Does anybody know the transaction used for this, please?
    Regards,
    Roger

    Hi Roger
    You can change the forms by SE71 transaction. 
    thanks
    Ashok
    Assign points for useful answer

  • Older generation of iPad and software

    Do older generation iPads update to the latest operating systems and browsers availble? I can't find a list of iPad's and their most recent associated OS or browser versions which is what prompted me to ask. I am not a apple user normally so I have very limited knowledge on these products. I am trying to find supported software on each generation of iPad's and iPhones. For instance, some pc's are only able to run up to Windows XP SP3 and IE9 or later (just an example - dont rake me over the coals if this is not exactly true).    Thanks in advance for helping me understand this while making some purchasing decisions.

    Read http://en.wikipedia.org/wiki/IPad
    Allan

  • Printing messages through ODI procedure using Javashell bean

    I am new to this ODI procedure using Javashell bean.
    As i know some basics in Java ,i am trying this following code through ODI.
    I wanted to print messages using the code System.out.println("Welcome");
    But where we can see the output for this code in ODI?
    If any on knows ,kindly let me how do i can go about this?

    if you run an agent from the command line and you are executing your procedure using this agent then  the output will be reported in the dos/cmd window.

  • No data selected for printing  message no 8I000

    Dear All
    At the  time of printing J1INCHLN certificate getting error NO DATA SELECTED FOR PRINTING MESSAGE NO 8I000 , where we have data in vendor's A/C and TDS is deducted at vendor's A/C .
    Some vendor under the same section allow us to print the certificate, but the in case of few vendors we r
    facing the problem.
    As we need to send the same to vendors help is needed.
    VG.

    we sorted out the issue

  • Issues with hooking up an older kodak aio3 printer to a new hp windows 8 computer

    I have a new HP p2-1343wb setup that came with a monitor. It is running Windows 8. I have an older Kodak aio3 printer that i used to use on both a Windows Vista and a  Windows XP computer. When I tried to intall the software and drivers for the printer off of the Kodak website, when my computer restarted the screen was split in half, and had horizontal lines running across it and the picture was shaking. I removed the kodak software and it fixed the problem. I am not sure if this is a HP problem, a Windows 8 problem or a Kodak problem. I am going to try the other forums too. Thanks ahead of time for any help.
    This question was solved.
    View Solution.

    Seren014, welcome to the forum.
    If this is your printer  you can click on the entry below the green check mark (Free download required) and download the software required to run the computer with Win 8.0 / 8.1.
    Please click "KUDOS Thumbs Up" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Why did I get a "You Have Missed a Print" message with Condé Nast At Home?

    You will miss a scheduled print if your computer is turned off or not connected to the Internet, or if you are logged out. When you see the “You have missed a print” message, you can click Print to print now, or Skip.
    You can set your Condé Nast At Home application to automatically do the same thing every time you miss a print.
    Open the Condé Nast At Home application.
    Click the wrench icon () to open the Settings dialog.
    If you want missed items to print immediately when you log in, select Automatically. If you want to be asked before an item is printed, select When Prompted. If you always want to skip missed items, select Never.
    Click Save in the Settings dialog to save your changes.
    Did this answer your question? If it did, why not click the Kudos! button to the left?
    If it didn’t answer your question about a printing problem, click Reply to ask the community, or search the forum for other posts that might help.
    Or, click here to go back to the Guide to Printing Condé Nast At Home Scheduled Content.
    Condé Nast At Home (c) 2011 Condé Nast. All Rights Reserved.
    I work on HP's behalf.

    hi i'm a new user and i'd like to be able to print a PAST crossword from the Universal Crossword please know this is not a printing problem but i hope you will be able to help me find an archived crossword puzzle for April 24, 2012 Thank You!

Maybe you are looking for

  • Assigning value to variable within Range

    The Problem: Range of values permitted is 10 < x < 30. x starts at 20. Variable x increments by 5, on a button click, until it reaches 30, at which point it should decrement by 5, until it reaches 10, before moving up the range again... and so on. I'

  • 10.2.0.3 to 10.2.0.4 upgrade-Real Application cluster Component INVALID

    HI Guys just upgraded the standalone database from 10.2.0.3 to 10.2.0.4 ...Everything looks good after running the catupgrd.sql except the Real Application Cluster Component is INVALID.. Is it because its not a RAC database or some other reason?Plz h

  • BEA - 337 alerts in GC

    Hi, I m constantly getting alerts in grid control related to BEA-337. My GC version is 11.1.0.1. The alert is: Incident (BEA-337 [WebLogicServer]) detected in /opt/oracle/gc_inst/user_projects/domains/GCDomain/servers/EMGC_OMS1/adr/diag/ofm/GCDomain/

  • Can somebody help with my color issue please.

    I recently updated my Itunes to the 8.0 version and now I have like a pink and purple itunes where the music is displayed. it dont really bother me to much but my wife wants hers to be that color and I have no clue hoe mine even got like that in orde

  • 3G keeps dropping signal

    My uncle has a 3g iPad and he keeps the 3G on all of the time. He is constantly losing his 3G connection and has to reset his network settings. Any ideas? Is this related to the wifi issue that was reported with the wifi iPads?