OLE Connection error

Im having trouble connecting to an Oracle database using the OLE provider MSDAORA from a VB program.
This is the code I am using. What am I missing?
ORAString = "Data Source=shaw;User Id=doc;Password=doc;"
Set DBConn = New ADODB.Connection
With DBConn
.ConnectionString = ORAString
.ConnectionTimeout = 10
.CursorLocation = adUseClient
.Provider = "MSDAORA"
.Open ORAConnectString
End With
When I connect with the above code I get the following error message:
ORA-12514: Message 12514 not found; product=RDBMS80; facility=ORA
I have a RDBMS80 folder on the client, but not on the server. There is a RDBMS folder on the server. I have installed the full Enterprise edition of Oracle 8i on the server. On the client I have installed the Net8 client software.
Thank you for your help.
null

I believe your ORAString is set incorrectly. You probably want
"DSN=shaw;UID=doc;PWD=doc;"
You can get a full list of all the keywords we support by looking for "connection string" in our Help file.
Justin Cave
ODBC Development

Similar Messages

Failed to open the connection error using Business View OLE DB

I have a Crystal Report built on a Business View with the db being accessed by an OLE driver. Everything works fine using Crystal Designer, but when I try to access it through BOE I get the "Failed to open the connection" error. I have the ole drivers installed on the server.
We are on BOE 12.1.0.
The db is IBM as400.
Suggestions??

Ok so I spent the day trying to find the differences between the working and the non-working application. I began by adding code one piece at a time to the working application. The goal was to try and get it to break on the deployment server. I found the lines of code that is causing the break on the deployment server. Here it is:
    private void setReportParameters()
        try
            crystalReportDocument.SetParameterValue(0, reportUserName.Value);
            crystalReportDocument.SetParameterValue(1, reportArea.Value);
            crystalReportDocument.SetParameterValue(2, reportCDR.SelectedValue);
            crystalReportDocument.SetParameterValue(3, reportStatus.Value);
        catch (Exception ex)
            throw ex;
This sub-routine is called from my button click code and is used to set the parameters for the report. Once I added this to the working application it broke also. My goal here is to send the parameters to the report from a form the user is filling out. Please keep in mind this code works in Visual Studio 2005 and my local IIS server running on my development machine. It breaks on the target deployment server
The code broke on reports with sub-reports as well as report with no sub-reports. As soon as it was added and deployed the application through the "Failed to open the connection" error.
Thoughts?

SSIS Package - An OLE DB error has occurred. Error code: 0x80040154.

I am getting below error when i try to execute a package
using batch file
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 64-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 7:15:29 AM
Progress: 2014-10-01 07:15:36.05
Source: Data Flow Task
Validating: 0% complete
End Progress
Error: 2014-10-01 07:15:36.05
Code: 0xC0202009
Source: ADTM001_UPDATE_COSTS_TIU0560 Connection manager "Excel
Connection Manager"
Description: An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB
Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2014-10-01 07:15:36.05
Code: 0xC020801C
Source: Data Flow Task Read Data From XLS [1]
Description: The AcquireConnection method call to the connection
manager "Excel Connection Manager" failed with error code 0xC0202009.
End Error
Error: 2014-10-01 07:15:36.05
Code: 0xC0047017
Source: Data Flow Task DTS.Pipeline
Description: component "Read Data From XLS" (1) failed
validation and returned error code 0xC020801C.
I have tried to use 32 bit exe as well , But then i get below
error ,
Could not load package because of error 0xC0014062.
Description: The LoadFromSQLServer method has encountered OLE
DB error code 0x80004005 (An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.). The SQL
statement that was issued has failed.

Hi Thanks for your reply, But the packages are already running under window authentication.
Please suggest something.The url you have given as reference does not solve my issue
I have tried to run 32 bit dtexec, I get below error'
Could
not load package because of error 0xC0014062.
Description:
The LoadFromSQLServer method has encountered OLE DB error code 0x80004005 (An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server
does not allow remote connections.). The SQL statement that was issued has failed.

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x80004005 Description: "Internal error: An une

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x80004005
Description: "Internal error: An unexpected error occurred (file 'pcxmlacommon.cpp', line 43, function 'PCFault::RaiseError').
I'm getting above error in the pre- execute phase of a DFT when I'm trying to fetch data from a SSAS cube using mdx query.
I'm using OLE DB provider for connecting to cube.
I got one resolution for Error Code 0X8004005, which asked me to add 'Format= Tabular' in cube's connection string. It does not seem to work either. Can any one help me out on this???

You are probably missing an update.
I saw a MS Connect post https://connect.microsoft.com/SQLServer/feedback/details/250920/error-using-oledb-or-datareader-to-get-analysis-services-data where that suggestion was proposed as a fix, but is for an older SQL Server version.
So do there is a question if you pull data from SQL Server 2012 SSAS using SSIS 2012 (so no other build is involved).
Arthur My Blog

SSIS 2008 R2 Excel Destination Error, "An OLE DB error has occurred. Error code: 0x80040E21.", cannot export to the new Excel (.xlsx) format

Hello.
I've been attempting to do a very simple task that just isn't working. For a Data Flow Task action in SSIS, I am trying to export data from a single SQL Server (2008 R2) database table to an Excel spreadsheet (.xlsx). No matter what I do, it
just keeps failing. The columns in the table match the column header names (in the first row) in the tab I select. Here is the output I get.
SSIS package "Package.dtsx" starting.
Information: 0x4004300A at Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Warning: 0x80049304 at Data Flow Task, SSIS.Pipeline: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's
console.
Information: 0x40043006 at Data Flow Task, SSIS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, SSIS.Pipeline: Pre-Execute phase is beginning.
Error: 0xC0202009 at Data Flow Task, Excel Destination [52]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
Error: 0xC0202025 at Data Flow Task, Excel Destination [52]: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
Error: 0xC004701A at Data Flow Task, SSIS.Pipeline: component "Excel Destination" (52) failed the pre-execute phase and returned error code 0xC0202025.
Information: 0x40043008 at Data Flow Task, SSIS.Pipeline: Post Execute phase is beginning.
Information: 0x4004300B at Data Flow Task, SSIS.Pipeline: "component "Excel Destination" (52)" wrote 0 rows.
Information: 0x40043009 at Data Flow Task, SSIS.Pipeline: Cleanup phase is beginning.
Task failed: Data Flow Task
SSIS package "Package.dtsx" finished: Success.
I kick-off the action and sometimes is hangs for a few seconds (20+ seconds) and sometimes it doesn't, but either way it fails. I tried this on a 32-bit machine, 64-bit machine, and still it fails. I tried an OLE DB connection to Excel and
that doesn't work either. I made sure that the connection string for the Excel spreadsheet is Provider=Microsoft.ACE.OLEDB.12.0;Data Source=[filepath\excelfile].xlsx;Extended Properties="EXCEL 12.0 XML;HDR=YES"; and still it doesn't work.
Now, when I switch it over to export to an Excel 2003 spreadsheet (.xls) it works! But I don't want it to go to the old Excel spreadsheet format, my requirement is to export the data to the new format. Is there a bug in the Access 2010 Database
Engine that won't allow me to export to the new Excel format? Otherwise, what can I be doing wrong? I set the Run64BitRuntime property to False and it still doesn't work.
My solution (so far) is to export it to Excel 2003 and then via the Script Task action use the Excel COM API (Microsoft.Office.Interop.Excel.dll) for 2010, open the file and save it in the new format (.xlsx) and that works great! However, the client
doesn't want to install Excel on the database server! So what can I do when the Excel Destination or OLE DB Destination (to connect to Excel) actions don't work!? Please help!!!
Like I mentioned, if this is a bug, that would be great to know so I can stop wasting my time. Thanks again.

Alright, so you mean to say is that the driver is not installed. Isn't version 12 the 2010 Access Database Engine Driver? I did install that, and I also tried the 2007 Access DB Engine driver, and both don't work. What driver am I missing?
The connection string is correctly formatted, yes?
Also, when setting up the OLE DB Destination action and I have it point to the Excel spreadsheet, and I specify as the provider "Microsoft Office 12.0 Access Database Engine OLE DB Provider" and click on Test Connection, the connection is
successful. Wouldn't that mean the 12.0 version driver is installed?
Thanks in advance.

OLE DB error: OLE DB or ODBC error: %1 is not a valid Win32 application

Hi,
I am creating the Cubes with couple of dimensions. My backend is Oracle. I can able to deploy the cube in my local machine which is running 32 Bit Windoes 7 OS. But when I try to deploy the cube in another server which is running Windows 2003 R2 64 bit OS,
returns "OLE DB error: OLE DB or ODBC error: %1 is not a valid Win32 application" this error. The driver whic I am using to connect the Oracel DB is "Native OLE DB\Oracle Provider for OLE DB". I have also installed the Oracle 10g 32 bit client in my machine.
Any solution for this issue?
Thanks,
Jeen

Hi Jeen,
What's the specific version of your SQL Server? Please try to install the latest Service Pack on 64bit box to see if this help.
How to obtain the latest service pack for SQL Server 2005:
http://support.microsoft.com/kb/913089
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

Data Federator data source not available causes Universe Connection error

I created a Data Federator project that connects to 20 servers across US and Canada. All data sources are SQL Server 2005. The DF project maps 40 source objects into 4 target objects. I created a universe based on the DF project and we have been quite pleased with Webi query response. Today one of the source servers was taken off line and this generated a connection error when trying to access the universe (not trying to access the data source that failed). We do not want the universe connection to error when one source server is not available u2013 is that possible?
If the answer is no then I see us abandoning what appears to be a great solution for real time distributed reporting and resorting to ETL and moving data.

Hi Chapman,
Can you be little elobrate on what you have done to solve the issue.
Thanks,
Dayanand

RFC connection Error in SLDCheck

Hi All,
I am trying to logon to Integration builder for that i getting the ESR builder address is not maintain. for this i have chk in SLDCheck t code ,there i am getting LCRSAPRFC connection error.I have test the RFC connection in that i am getting the
the error in register server program
Error Details     ERROR: program LCRSAPRFC_XID not registered
now wht i have to do for troubleshooting
Regards

Thanx for reply
when I test connection to Connection Test SLD_UC     error
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: program SLD_UC not registered
Error Details     LOCATION: SAP-Gateway on host sapdevpi / sapgw00
Error Details     DETAIL: TP SLD_UC not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 62
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1778
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Fri Jan 8 11:05:42 2010
Error Details     VERSION: 2
RFC SLD_UC is connection T
Gateway Host sapdevpi
Gateway server sapgw00
same error with
Connection Test SLD_NUC
Connection Test SAPSLDAPI   ( program Id SAPSLDAPI_DPI )
Connection Test SAPJ2EE
In Connection Test LCRSAPRFC error program id LCRSAPRFC_DPI
Logon     Cancel
Error Details     max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=45
Error Details     ERROR: max no of 100 conversations exceeded
Error Details     LOCATION: CPIC (TCP/IP) on host sapdevpi
Error Details     COMPONENT: CPIC (TCP/IP) with Unicode
Error Details     COUNTER: 82
Error Details     MODULE: r3cpic_mt.c
Error Details     LINE: 10791
Error Details     RETURN CODE: 466
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Fri Jan 8 11:12:56 2010
Error Details     VERSION: 3
Regards
shahid

RFC connection error between Netweaver 7 EHP1 and Ides ECC6

Hi Friends,
I try to create source system in BI from Netwever EHP1 to IDES ECC6 EHP3.
During the creation I get a connection error, says. check connction parameter.
I checked the parameter, everything is fine. Server, System and number.
When I went to the SM59 and created a connction.
I.E. with the same parameter like system = 06 and server = compi9 gave client 800 etc.
The Host name is resolved to 192.168.2.111 wich is OK.
But when I run the connection test it shows me "ERROR: partner '80.156.86.78:sapgw06' not reached"
I have no idea where this IP '80.156.86.78" is comming from.
No Problem with the opposite way, from Ides to NW and login to the System is OK too.
Can anybody help me with this problem.
RG. Jimbob

Hi,
What is the next screen that comes up when you click on remote logon.
If no screen comes up then:
Check the user type of the user id used for this RFC.
It should be either dialog or service user for able to remote login.
If it open a new window and asks for password, then its excatly password issue.
Also make sure that the password is in numeric and correct.
Also make sure that the current user check box is unchecked.
Even if it dosent work, delete the connection and create again.
Please award points if helps.
Thanks
Santhosh

RFC connection Error

Dear All,
    when i connect our BI System to R/3 system via RFC in SM59 ,i am getting following error in BI system and also The problem occur in particular instance .(Other instance working fine in BI system)
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host chwslp05 / sapgw01
Error Details     DETAIL: no connect of TP sapdp15 from host sapp3b.eame.syngenta.org after 20 s
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 162003
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1973
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Mon Apr 27 14:29:33 2009
Error Details     VERSION: 2
Any one please suggest.
Thanks,
Thirumoorthy.

mostly your gateway servicve is not working check smgw tcode on that instance
you can do this goto sm59->select the instace execute tcode smgw
easy way is restart the instance
it will start working
Samrat

RFC Connection error in SM59 for SAP J2EE

Hi All,
i am getting the following error description while testing the connection for
SAP J2EE ...
Connection Test SAPJ2EE
Connection Type TCP/IP Connection
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program sapfallback not registered
Error Details LOCATION: SAP-Gateway on host filip / sapgw00
Error Details DETAIL: TP sapfallback not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 1483
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1694
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Tue Mar 31 02:44:35 2009
Error Details VERSION: 2
Help me resolve this
Regards,
Mahesh.

Hi,
Please follow this steps:
Creating RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59 (ABAP) and the Visual Administrator (Java):
u2022 AI_RUNTIME_JCOSERVER
u2022 AI_DIRECTORY_JCOSERVER
u2022 LCRSAPRFC
u2022 SAPSLDAPI
Depending on your client settings, it may be necessary to be logged on your SAP Exchange Infrastructure host as SAP system user with the authorization to maintain customizing tables and to release transport orders. Note, that user "SAP*" or "DDIC" does not have these authorizations.
Maintaining the RFC Connections (Transaction SM59)
1. Log on to your SAP Exchange Infrastructure central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
RFC destination: AI_RUNTIME_JCOSERVER
Connection type: T
Description: <your description>
5. Choose ENTER
6. Choose the tab Technical settings and do the following:
a. Select Registered Server Program
b. In the Program ID field, enter: AI_RUNTIME_<SID> where <SID> is the SAP system ID of your Integration Server host. Use uppercase letters only.
c. Enter Gateway host and Gateway service of your Integration Server host. To find out the required parameters:
a. On the Integration Server host, call transaction SMGW
b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and gateway service)
7. Choose tab Special Options and select the flag Unicode in the box Character Width in Target System.
8. Save your settings.
9. Repeat the steps 3 u2013 8 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
Program ID: AI_DIRECTORY_<SID>, where <SID> is the SAP system ID of your SAP XI host
LCRSAPRFC
Program ID: LCRSAPRFC_<SID>, where <SID> is the SAP system ID of your SAP XI host.
SAPSLDAPI
Program ID: SAPSLDAPI_<SID>, where <SID> is the SAP system ID of your SAP XI host.
10. Leave the transaction SM59 open for later tests.
J2EE Configuration for the Destinations (Visual Administrator)
1. On your SAP Exchange Infrastructure central instance host, start the J2EE Engine administration tool.
2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
3. In the section RFC destination, enter exactly the same program ID and gateway options for AI_RUNTIME_JCOSERVER that you used in the step Maintaining the RFC connection above. Additionally, set the number of processes to 10.
4. In the section Repository, do the following:
a. Enter the parameter for the SAP XI host: Application Server, System Number, Client and Language.
b. For User and Password maintain the login parameters for the user SAPJSF.
c. Select the flag Unicode.
6. Choose Set.
7. Repeat the steps 3 u2013 6 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
u2022 Corresponding values from SM59
u2022 Number of processes: 10
LCRSAPRFC
u2022 Corresponding values from SM59
u2022 Number of processes: 3
SAPSLDAPI
u2022 Corresponding values from SM59
u2022 Number of processes: 3
Testing the RFC Destination
After you have maintained all RFC destinations in both the ABAP and Java environment, you can check all the connections above as follows:
1. Call transaction SM59 again.
2. Open your RFC destination.
3. Choose Test Connection. No error should be displayed.
This will solve your problem.
Thanks
Laxmi Bhushan

RFC connection error (VPN-access)

Hi!
I have the following error for the RFC connection:
The RFC connection is setup as follows.
/H/10.101.7.1/S/3299/H/10.151.6.194
10.101.7.1 = IP of our SAP Router
10.151.6.194 = IP of customer system
The RFC connection is established:
SAP Router (intern) --> Target systems
The error is:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner not reached (host 10.151.6.194, service sapgw20)
Error Details LOCATION: SAP-Gateway on host bksapp01 / sapgw20
Error Details DETAIL: NiPConnect2
Error Details CALL: SiPeekPendConn
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 592
Error Details ERROR NUMBER: 10060
Error Details ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details MODULE: nixxi.cpp
Error Details LINE: 8777
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 640
Error Details TIME: Thu Jun 19 10:42:42 2008
Error Details VERSION: 37
Can some one help to solve the problem?
Thank you very much
Thom

Hi
Change the saprouter string to
/H/10.101.7.1/S/3299/H/10.151.6.194/S/32<system number>
and try !!!

RFC connection error when registering PROGRAM ID.

Hi,
I created a RFC connection of type T.
I gave the following parameters ->
gateway host: hostname and then ip-address
gateway service: sapgwxx
Registered program id: xxx
It is giving me the following error:
Error Details Error when opening an RFC connection
Error Details ERROR: program sapgwxx not registered
Error Details LOCATION: SAP-Gateway on host <hostname> / sapgwxx
Error Details DETAIL: TP sapgwxx not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2696
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Can anyone help me in troubleshooting the issue.
Also I am not able to register this program id in Visual Admin -> Services -> JCo RFC Provider. Here it is giving me an error. Can anyone guide me in this?
Points to be rewarded for any kind of small help.

Thanks Ramesh.
I followed the blog. Here are the steps that I did.
RFC destination:
1. To create the RFC go to TCODE: SM59 -> Done2. Create new destination of type T (TCP/IP) -> Done
3. Make sure you select Registered Server Program option before writing your program ID -> Done
4. Write you program ID (remember it's case-sensitive) -> gave the SID name
5. In the gateway host and gateway service write the values of your "Application system" - business system (not the XI server) -> Typed the gateway hostname and gateway service "sapgw<instance no>", that I got from SMGW.
But still I face the same problem. It get the following error:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program <SID name> not registered
Error Details LOCATION: SAP-Gateway on host xxxxx / sapgwxx
Error Details DETAIL: TP <SID Name> not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2719
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Thu Nov 1 10:39:43 2007
Error Details VERSION: 2
Kindly help me out.

RFC Connection Error during Web AS ABAP Database Instance

I keep getting RFC Connection error installing the database instance. The following are the pertinent logs:
INFO 2007-05-09 20:10:04
Working directory changed to C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB.
INFO 2007-05-09 20:10:04
Output of C:\usr\sap\X22\SYS\exe\run\r3trans.exe -u 1 -i "C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB\mssprocs640.dat" is written to the logfile r3trans.exe.log.
INFO 2007-05-09 20:10:22
Execution of the command "C:\usr\sap\X22\SYS\exe\run\r3trans.exe -u 1 -i "C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB\mssprocs640.dat"" finished with return code 0. Output: This is C:\usr\sap\X22\SYS\exe\run\r3trans.exe version 6.13 (release 640 - 03.06.05 - 17:04:00).unicode enabled versionC:\usr\sap\X22\SYS\exe\run\r3trans.exe finished (0000).
INFO 2007-05-09 20:12:23
RFC parameter CLIENT set to value 000.
INFO 2007-05-09 20:12:23
RFC parameter USER set to value DDIC.
INFO 2007-05-09 20:12:23
RFC parameter LCHECK set to value 1.
INFO 2007-05-09 20:12:23
RFC parameter PCS set to value 1.
INFO 2007-05-09 20:12:23
RFC parameter LANG set to value EN.
INFO 2007-05-09 20:12:23
RFC parameter ASHOST set to value cix22.
INFO 2007-05-09 20:12:23
RFC parameter SYSNR set to value 00.
INFO 2007-05-09 20:12:23
RFC connection information checked successfully.
ERROR 2007-05-09 20:12:24
FRF-00007 Unable to open RFC connection.
I tried the following fixes spread across different threads in this Expert Forums:
1. Someone said network problem. I rebooted, restarted the install and even redo it.
2. Another suggestion was to use caps on the password. Didnt work.
3. One suggestion was to update the keydb.xml file. However, I could find such property name:
search for the table t_SAPComponent_SAPSystemLogon_SHARED
then look for <fld name="pPW">, <properties>,
<property name ="GUIENG_USER_INPUT" and set the value
"GUINEG_TRUE" to "GUIENG_FALSE".
4. I even used the ddic password 19920706 which is supposed to be the default.
5. Restarted the instance and applied all the fixes above.
Does anyone know what is going on base on the logs above? Thanks.

try moving all your install disk onto local file system then rerun the install. That might work....

Haven't been able to connect to itunes for 3 days. Says connection error but im connected to the internet

I haven't been able to connect to itunes for 3 days. It says theres a connection error, yet I am connected to the internet. I have redownloaded itunes and still get this message.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

OLE Connection error

Similar Messages

Maybe you are looking for