OLE DB Destination" failed validation and returned validation status "VS_ISBROKEN.

Hi
I have a package which has 10 sequence containers. Have 10 Flat File Source files and all is working perfect on BI Debug mode. When I deploy this package to server I am getting the following error.
I have changed the property Retain the same connection = True but same problem. I have changed the data flow task to Load Project instead of Load Into Project but in error message it is still showing the old name. I have tried to remove the whole step i.e.
Removed Load into Project Data flow with sequence container but I am getting the same error message.
I am not able to understand the reason. Any Idea why am I getting the same error message even I do not have the Data Flow named Load Into Package. It is in SSIS 2008 and being deployed on SQL 2012 server.
Message
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 15:28:32 Error: 2014-07-22
15:28:36.86 Code: 0xC020201B Source: Load Into Project OLE DB Destination [62] Description: The number of input columns for OLE DB Destination.Inputs[OLE DB Destination Input] cannot be zero. End Error Error:
2014-07-22 15:28:36.86 Code: 0xC004706B Source: Load Into Project SSIS.Pipeline Description: "OLE DB Destination" failed validation and returned validation status "VS_ISBROKEN". End Error
Error: 2014-07-22 15:28:36.86 Code: 0xC004700C Source:
Load Into Project SSIS.Pipeline Description: One or more component failed validation. End Error Error: 2014-07-22 15:28:36.87 Code: 0xC0024107 Source: Load Into Project Description:
There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 15:28:32 Finished: 15:28:36 Elapsed: 4.39 seconds. The package execution failed. The
step failed.
Many Thanks.
MH
this the error log
starttime
endtime
event
source
message
57:26.0
57:26.0
OnError
Load Into Project
The number of input columns for OLE DB Destination.Inputs[OLE DB Destination Input] cannot be zero.
57:26.0
57:26.0
OnError
Load Into Project
OLE DB Destination failed validation and returned validation status "VS_ISBROKEN".
57:26.0
57:26.0
OnError
Load Into Project
One or more component failed validation.
57:26.0
57:26.0
OnError
Load Into Project
There were errors during task validation.
57:19.0
57:19.0
OnPostExecute
Load Into TrialBalance
57:19.0
57:19.0
OnPostExecute
Trial Balance
57:19.0
57:19.0
OnPostExecute
SSIS_LoadCheck_CoreManGroup
57:19.0
57:19.0
PackageEnd
SSIS_LoadCheck_CoreManGroup
End of package execution.
57:18.0
57:18.0
OnPostExecute
Load Into JournalLine
57:18.0
57:18.0
OnPostExecute
JournalLine
57:18.0
57:18.0
OnPreExecute
Trial Balance
57:18.0
57:18.0
OnPreExecute
Truncate TrialBalance
57:18.0
57:18.0
OnPostExecute
Truncate TrialBalance
57:18.0
57:18.0
OnPreExecute
Load Into TrialBalance
57:07.0
57:07.0
OnPostExecute
Load Into Journal Type
57:07.0
57:07.0
OnPostExecute
JournalType
57:07.0
57:07.0
OnPreExecute
JournalLine
57:07.0
57:07.0
OnPreExecute
Truncate Table JournalLine
57:07.0
57:07.0
OnPostExecute
Truncate Table JournalLine
57:07.0
57:07.0
OnPreExecute
Load Into JournalLine
57:05.0
57:05.0
OnPostExecute
Load Into UserName
57:05.0
57:05.0
OnPostExecute
UserName
57:05.0
57:05.0
OnPreExecute
Business Area
57:05.0
57:05.0
OnPreExecute
Truncate Table Business Area
57:05.0
57:05.0
OnPostExecute
Truncate Table Business Area
57:05.0
57:05.0
OnPreExecute
Load Into Business Area
57:05.0
57:05.0
OnPostExecute
Load Into Business Area
57:05.0
57:05.0
OnPostExecute
Business Area
57:05.0
57:05.0
OnPreExecute
Cost Centre
57:05.0
57:05.0
OnPreExecute
Truncate CostCenter
57:05.0
57:05.0
OnPostExecute
Truncate CostCenter
57:05.0
57:05.0
OnPreExecute
Load Into Cost Centre
57:05.0
57:05.0
OnPostExecute
Load Into Cost Centre
57:05.0
57:05.0
OnPostExecute
Cost Centre
57:05.0
57:05.0
OnPreExecute
Project Status
57:05.0
57:05.0
OnPreExecute
Truncate Table Project Status
57:05.0
57:05.0
OnPostExecute
Truncate Table Project Status
57:05.0
57:05.0
OnPreExecute
Load Into Project Status
57:05.0
57:05.0
OnPostExecute
Load Into Project Status
57:05.0
57:05.0
OnPostExecute
Project Status
57:05.0
57:05.0
OnPreExecute
Project
57:05.0
57:05.0
OnPreExecute
Truncate Table Project
57:05.0
57:05.0
OnPostExecute
Truncate Table Project
57:05.0
57:05.0
OnPreExecute
Load Project
57:05.0
57:05.0
OnPostExecute
Load Project
57:05.0
57:05.0
OnPostExecute
Project
57:05.0
57:05.0
OnPreExecute
JournalType
57:05.0
57:05.0
OnPreExecute
Truncate Table Journal Type
57:05.0
57:05.0
OnPostExecute
Truncate Table Journal Type
57:05.0
57:05.0
OnPreExecute
Load Into Journal Type
57:03.0
57:03.0
OnPostExecute
Load Into Entity
57:03.0
57:03.0
OnPostExecute
Entity
57:03.0
57:03.0
OnPreExecute
Account
57:03.0
57:03.0
OnPreExecute
Truncate Table Accounts
57:03.0
57:03.0
OnPostExecute
Truncate Table Accounts
57:03.0
57:03.0
OnPreExecute
Load Into Account
57:03.0
57:03.0
OnPostExecute
Load Into Account
57:03.0
57:03.0
OnPostExecute
Account
57:03.0
57:03.0
OnPreExecute
UserName
57:03.0
57:03.0
OnPreExecute
Truncate Table User Name
57:03.0
57:03.0
OnPostExecute
Truncate Table User Name
57:03.0
57:03.0
OnPreExecute
Load Into UserName
57:02.0
57:02.0
PackageStart
SSIS_LoadCheck_CoreManGroup
Beginning of package execution.
57:02.0
57:02.0
OnPreExecute
SSIS_LoadCheck_CoreManGroup
57:02.0
57:02.0
OnPreExecute
CoA
57:02.0
57:02.0
OnPreExecute
Truncate Table CoA
57:02.0
57:02.0
OnPostExecute
Truncate Table CoA
57:02.0
57:02.0
OnPreExecute
Load Into CoA
57:02.0
57:02.0
OnPostExecute
Load Into CoA
57:02.0
57:02.0
OnPostExecute
CoA
57:02.0
57:02.0
OnPreExecute
Entity
57:02.0
57:02.0
OnPreExecute
Truncate Table Entity
57:02.0
57:02.0
OnPostExecute
Truncate Table Entity
57:02.0
57:02.0
OnPreExecute
Load Into Entity

Message
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 15:28:32 Error: 2014-07-22
15:28:36.86 Code: 0xC020201B Source: Load Into Project OLE DB Destination [62] Description: The number of input columns for OLE DB Destination.Inputs[OLE DB Destination Input] cannot be zero.
22 15:28:36.86 Code: 0xC004700C Source: Load Into Project 22 15:28:36.87 Code: 0xC0024107 Source: Load Into Project Description: There were errors during task validation. End
Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 15:28:32 Finished: 15:28:36 Elapsed: 4.39 seconds. The package execution failed. The step failed.
Hi MustafaH,
According to the error message(hightlight above), it seems it's a mapping issue that Naarasimha point out in the post above. Please check this carefully.
An OLE DB destination includes mappings between input columns and columns in the destination data source. You do not have to map input columns to all destination columns, but depending on the properties of the destination columns, errors can occur if
no input columns are mapped to the destination columns.
Reference form: http://msdn.microsoft.com/en-us/library/ms141237.aspx
In your post, you said that it is in SSIS 2008 and being deployed on SQL 2012 server. Do you mean that you create the package deployment utility by using SSIS 2008, and then implement SSIS deployment in SSIS 2012 environment? If so, you need to
convert the project to package deployment model to generate Manifest file in SSIS 2012. Please see:
Use the SQL Server 2008 version of Business Intelligence Development Studio to develop and maintain packages that are based on SQL Server 2008 Integration Services (SSIS)
Use SQL Server Data Tools - Business Intelligence for Visual Studio 2012 to develop and maintain packages that are based on SQL Server 2012 Integration Services (SSIS).
For more information, please see:
Interoperability and Coexistence (Integration Services):
http://msdn.microsoft.com/en-us/library/bb522577.aspx?ppud=4
If you have any feedback on our support, please click
here.
Elvis Long
TechNet Community Support

Similar Messages

Data flow task error failed validation and return validation status "VS_NEEDSNEWMETADATA"

I have ETL with ~800 tables that I moving from Oracle to SQL Server (Prod Oracle -> Prod SQL)
Now the Oracle/SQL new version was came from vendor that I need to test, and for that I created new DEV environments for Oracle and SQL , the update includes updated new columns in exists tables and new tables . (DEV Oracle -> DEV SQL)
So what I tried to do is to take the old ETL(PROD) to change the connection to DEV servers.
Then I executing the packages from local laptop it's working, and if I trying to execute the packages from job schedule it's giving me errors : "Data flow task error failed validation and return validation status "VS_NEEDSNEWMETADATA"
I went to each table to check the columns if something different, and I was dropping some of the tables and recreated them in the destination but the error still shows. I also tried to change the package to "DelayValidation" to True but without
success.

I do not understand the difference between "... if I going to change the Connection Manager to new connection" and "didn't change the Connection Manager, only changed inside the Server name / user/ pass" 800 tables.
What I see is some tables your packages sees in Dev (laptop) is not of the same schema once the package is deployed hence the metadata error.
Arthur
MyBlog
Twitter

WD Exercise : Validating and Non-Validating Actions

Hi Experts!
I am doing the validating and non-validating exercise based on the SDN document<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/wd%20java/wd%20tutorials/web%20dynpro%20sample%20applications%20and%20tutorials.htm#6">here</a>.
When I download the already done application, it works quite well. However, when I try to make it on my own, I encountered following problems:
1. I could not write labels as [married since] on the radio button.
2. I could not do the data mapping from the view controller to the component controller.
As a result I have not been able to deploy the application.
The <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/wd%20java/wd%20tutorials/using%20validating%20and%20non-validating%20actions.pdf">document</a> I am refering to, has a explanation of the application contents.
But does anybody know if there is a manual for creating this application?
Many thanks
Regards,
Sudeep

Hi
For your problem
1.I could not write labels as [married since] on the radio button
Use the <b>text</b> property to assign labels to radio button
Check the sample whether its using radiobutton group?
2.I could not do the data mapping from the view controller to the component controller
You can only map from component controller to view controller.
Regards
Ayyapparaj

Validity and non-validity material

hi frnds
what is validity material and non-validity material ?
regards

Hi Santosh,
Please go through this SAP help it may not give you Exact answer for your quiery but you can get some idea on Material validity.
http://help.sap.com/saphelp_47x200/helpdata/en/f3/7c8fe6a39411d19daf0000e8323350/frameset.htm
I hope it will help you,
Regards,
Murali.

Usage of ADF's validation and custom validation together ??

Hello all..
My apologize if this query already in place...
Well, I've a situation where which I need a way to combine/club my application specific validation error messages with the ADF component's messages.
For example:
1) ADF's component validator:
<af:selectInputDate label="#{msg.dob}" value="#{bean.DOB}" showRequired="true" >
<f:convertDateTime type="date" pattern="yyyy-MM-dd"/>
<af:validateDateTimeRange minimum="#{action.minDate}" maximum="#{action.todayDate}" notInRangeMessageDetail="#{msg.dateRange}" />
</af:selectInputDate>
2) Also, I've my business specific custom validations perfomed on click of action button on my form. Where I use ..
public void addFacesMessage(Severity msgSeverityType, String message)
FacesContext.getCurrentInstance().addMessage(null, new FacesMessage(msgSeverityType, message, message));
for adding the error messages to context -
As part of the life cycle, the validators in the form level is fired first and I don't have scope for the request processing/action in order to run thru my buisness method. So always my component's error messages are fired alone - This way my custom validations are not invoked. Is there a way that we can combine both set of error messages together and render them as a common error msg list using <af:messages> tag ?
If so, please provide me the link to the article!!!
Your help on this context will be very helpful....Thanks in advance!!!

Hello all..
My apologize if this query already in place...
Well, I've a situation where which I need a way to combine/club my application specific validation error messages with the ADF component's messages.
For example:
1) ADF's component validator:
<af:selectInputDate label="#{msg.dob}" value="#{bean.DOB}" showRequired="true" >
<f:convertDateTime type="date" pattern="yyyy-MM-dd"/>
<af:validateDateTimeRange minimum="#{action.minDate}" maximum="#{action.todayDate}" notInRangeMessageDetail="#{msg.dateRange}" />
</af:selectInputDate>
2) Also, I've my business specific custom validations perfomed on click of action button on my form. Where I use ..
public void addFacesMessage(Severity msgSeverityType, String message)
FacesContext.getCurrentInstance().addMessage(null, new FacesMessage(msgSeverityType, message, message));
for adding the error messages to context -
As part of the life cycle, the validators in the form level is fired first and I don't have scope for the request processing/action in order to run thru my buisness method. So always my component's error messages are fired alone - This way my custom validations are not invoked. Is there a way that we can combine both set of error messages together and render them as a common error msg list using <af:messages> tag ?
If so, please provide me the link to the article!!!
Your help on this context will be very helpful....Thanks in advance!!!

Getting this Error: There was an error with input column "FROM_DATE" (6356) on input "OLE DB Destination Input" (6100). The column status returned was: "The value could not be converted because of a potential loss of data.".

Hi,
I have a flat file with this kind of value - " 20140713 " . To take this value in DB Table I set the data type of this column in flat file manager - string [DT_STR] 50, But in destination table It is set as date [date] NULL
while process this file, I'm getting this error, that mention in subject line.
Please confirm, how to do that as I don't want to change the destination column type.

you need to add a derived column in SSIS with expressions as below
(DT_DATE)SUBSTRING([Column],1,4) + (DT_WSTR,30) "-" + SUBSTRING([Column],5,2) + (DT_WSTR,30) "-" + SUBSTRING([Column],7,2)
ANd map this new column to your tables date column
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Does the 1422 grabber use line valid and frame valid signals

Hi,
Setup: I have set a camera (digital) to acquire a 200x200 image (Basla config software), and set the “channel->properties->Basic->Acquisition Window” values to 0,0,984,989 (in MAX); the camera is in free running mode at 20 fps.
The problem I have is trying to understand the returned image, i.e. when I acquire using SNAP I end up with multiple frames in the window. This leads me to believe that the 1422 does not use FVAL and LVAL lines. Is this so?
Thanks in advance

The 1422 does use both the FVAL and LVAL signals (or elso you would never get a frame). In order to only see one image, you need to change the acquisition window in MAX to be the same size as the image. In your case, you are telling MAX to acquire an image 985x990 while your actual image is only 200x200. Therefore, MAX will append lines onto the image until it reaches 985. That is why you are seeing multiple images. In MAX, set your acquistion size to 200x200 to solve the problem.
Hope this helps.
Jack Arnold
Application Engineer
National Instruments

Reg validations and assignments

Hi All
Im new to MDM and need to clarify some basic doubts....
What is the deifference between validations and assignments and what is their significance , and
SAP MDM is the third party tool and who is the atual vendor for this.
Points rewarded for the best..
Regards
Hari

Hi Hari,
Both validations and assignments can be defined in MDM data manager using
functions and operators.
deifference between validations and assignments
Validations returns boolean value (True or False ) based on some rule
Example: IF (IS_NULL(Name),FALSE,TRUE).
In the above expression if name field contains null value,it returns false otherwise
true. Validations can be executed manually or automatically.
To execute the validations manually just right click on records on which you want to
do validations and execute the validation then you can see the result.
Automatic validations are automatically are executed upon record saving by giving
warning or error meaasge.
Assignments assign return value to the some field which is selected.
Suppose you took number field as assignment field and you have written expression
like this:
Example: IF (IS_NULL(Name),100,200).
If name field has null value, assigns 100 to number field otherwise assigns 200 to
number field.
See below links to get more details:
MDM Validations
New Webinar About Validations with MDM 5.5
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/102dc4e5-07c9-2910-93b3-f49c8ed52509
Validation Funcitons Enhanceable
Thanks
Narendra

Reg: Validation and substitution

Hi gurus
what is the use and difference of Validation and substitution?
pls urgent
thanks
amk

Hi AMK
validation will validate field values in your input in transaction and return a message, it could be warnign, error .
Ex:- if you want to check for cocode=1000 business area would be HYD.
in Validation (T-code GGB0) you write validation that check cocode=1000 busineess area= hyd else error message
"enter right business area"
you need to activate this validation in T-code 0b28
when ever you enter values in f-02 system will execute this validation and returns a message accordingly.
Substitution will subtitute the field values without the user knowledge.
Creation of subsitution GGB1
It will substitute value of business area automatically without user knowlege.
Best Regards
Ashish Jain
Message was edited by:
Ashish Bohara

WebDynpro Action Types : Validating vs Non Validating Action Types

Hi
Can someone tell me the difference between Validating and Non Validating Action Types in webdynpro. I read it through, but its not very clear.
regards
Saurabh

HI Maksim,
Thanx it helped !!
I need some more help. I have a PAR file which displays an employees CV in an IView. I want to print only the content in the iView (i.e the CV) not the complete page with Roles and worksets, is there some code that can do this.
I need to place a button on the CV (in the iView) and on the click of the button the CV (iView) gets printed.
A workaround for this is that I open the CV (from the iView Personalization ) in a new window and then from the File menu of the new window fire the Print option. But I dont want to do it this way.
I want to Print the CV from the parent window only.
Plz suggest !!
Regards
Saurabh

ForbiddenError: The server failed to authenticate the request. Verify that the certificate is valid and is associated with this subscription.

Im trying to connect to my azure subscription via powershell on my machine but keep getting the following error when i run a command:
ForbiddenError: The server failed to authenticate the request. Verify that the certificate is valid and is associated with this subscription.
The steps i have taken so far are:
1. get settings file
Get-AzurePublishSettingsFile
2. Import settings file
Import-AzurePublishSettingsFile -PublishSettingsFile "C:\Users\me\Downloads\credentials.publishsettings"
3. I then run Get-Azuresubscription with the following output:
SubscriptionId : 699385c3-b83a-44af-a651-bxxxxxxxxx
SubscriptionName : Windows Azure MSDN - Visual Studio Premium
Environment : AzureCloud
SupportedModes : AzureServiceManagement
DefaultAccount : 3B68902B5170D5EC91BFCBE4CC27E2A8838F61C4
Accounts : {3B68902B5170D5EC91BFCBE4CC27E2A8838F61C4, 26B118D7F3C598FB8FE9CDC49AB5DE5E450C967C,
03E1E1F0B8C7717F11FB58A14138C35524AB3F8D, 9A2E1FD267ECCC0E9B8C151BD931FC4824E89184...}
IsDefault : True
IsCurrent : True
CurrentStorageAccountName :
TenantId :
I run Get-AzureAccount and get the following:
Id Type Subscriptions Tenants
3B68902B5170D5EC91BFCBE4CC27E2 Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
A8838F61C4
26B118D7F3C598FB8FE9CDC49AB5DE Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
5E450C967C
03E1E1F0B8C7717F11FB58A14138C3 Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
5524AB3F8D
9A2E1FD267ECCC0E9B8C151BD931FC Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
4824E89184
85AD02CB8EB8AB20CF2C44FD9D19F2 Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
9B6BB2FCD2
Finally, when i try to run Get-AzureSQLDatabaseServer, to list my databases, i get this error:
WARNING: Client Session Id: '5911f288-7b02-4c94-bb9d-37b9ea5fc187-2015-01-13 11:47:54Z'
WARNING: Client Request Id: '3e5f7ea9-092a-46fd-a6a6-6916b9161b77-2015-01-13 15:25:41Z'
Get-AzureSqlDatabaseServer : ForbiddenError: The server failed to authenticate the request. Verify that the certificate is valid and is associated
with this subscription.
At line:2 char:1
+ Get-AzureSqlDatabaseServer
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-AzureSqlDatabaseServer], CloudException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.SqlDatabase.Server.Cmdlet.GetAzureSqlDatabaseServer
I would appreciate any help in figuring out what i am doing wrong here.
Thanks,

OK. That won't work in Azure Automation though, as mentioned above. OrgID (recommended) or cert-based auth will need to be used. PublishSettings file won't work.
Correct, but the original question was:
<Quote>
Im trying to connect to my azure subscription
via powershell on my machine
</Quote>
I wanted to test automation script's core functionality without having to wait for the very very long time taken for an automation runbook
to spin up, actually run and provide output (can often take 2+ minutes for a trivial script). Although i cant run Workbooks on my pc, i can run the core modules (view virtual machines, databases etc) to ensure my logic is sound.

Memory Leakage while parsing and schema validation

It seems there is some kind of memory leakage. I was using xdk 9.2.0.2.0. Later i found that from this forum which contain a Topic on this and they (oracle ) claim they have memory leakage. And they have fixes this bugs in 9.2.0.6.0 xdk. When i used truss command, for each call to parser and schame validation, it was opening file descriptor for lpxus and lsxus file. And this connections were not close. And keep on openning it with each call to parser. I was able to diagonise this using truss command on on solaris. After making many calls, i was error message could not open file Result.xsd (0202). I am using one instance of Parser and Schema. And i am doing clean up for parser after each parse.
Later i downloaded, 9.2.0.6.0,
Above problem for the parser was solvedm but still the problem continued for schema validation. And even i tried with latest beta release 10.
And this has caused great troubles to us. Please can u look whether there is come sort of leakage. Please advice if u have any solution.
Code---
This below code is called multiple times
char* APIParser::execute(const char* xmlInput) {
          char* parseResult = parseDocument(xmlInput);
          //if(strcmp(parseResult,(const char*)"")==0) {
if(parseResult == NULL) {
               parseResult = getResult();
parser.xmlclean();
     return parseResult;
          } else {
               return parseResult;
Parser and schema are intialised in Construtor and terminated in Destructor.

Hi, here is the complete test case
#include<iostream>
#ifndef ORAXML_CPP_ORACLE
# include <oraxml.hpp>
#endif
using namespace std;
#define FAIL { cout << "Failed!\n"; return ; }
void mytest(int count)
     uword ecode;
     XMLParser parser;
     Document *doc;
     Element root, elem;
     if (ecode = parser.xmlinit())
          cout << "Failed to initialze XML parser, error " << ecode << "\n";
          return ;
     cout << "\nCreating new document...\n";
     if (!(doc = parser.createDocument((oratext *) 0, (oratext *) 0,(DocumentType *) 0)))
     FAIL
     if (!(elem = doc->createElement((oratext *) "ROOT")))
               FAIL
     string test="Elem";
     for(int i=0;i<count;i++)
          //test="Elem"+string(ltoa(i));
          if (!(elem = doc->createElement((oratext *) "element")))
               FAIL
          if (!doc->appendChild(elem))
               FAIL
     //doc ->print();
     //parser.xmlclean();
     parser.xmlterm();
int main(int argc,char* argv[])
     int count=atol(argv[1]);
     mytest(count);
     char c;
     cout<<"check memory usage n press any key"<<endl;
     cin>>c;
     return 0;
-------------------------------------------cut here-----
Now, i cant use the xdk 10g because i work on a hpux machine. I have tried the above program with a count of 1000000. the memory usage at the end was around 2 gigabytes.
Could someone please please help me? :(
Thank you.

I have the appropriate Adobe Acrobat 9 Standard software and a valid SN for that software; however, am getting an "Invalid Serial Number" error on installation...please help

I have the appropriate Adobe Acrobat 9 Standard software and a valid SN for that software; however, am getting an "Invalid Serial Number" error on installation...please help

Hi James ,
Make sure you are entering the correct serial number.Try it once again and check.
If it fails please get in touch with Adobe Support.Here is the link for the same.
https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
Regards
Sukrit Dhingra

Intel Matrix Storage Manager disables Windows Update and Windows Validation on Windows 7 64-bit

I have a Lenovo ThinkPad R61 8918CTO on which I did a clean install of Windows 7 Ultimate SP1 (64-bit) on a new Seagate Momentus XT 750GB drive. The installation was trouble-free, as were all of the post-install Windows Updates.
Then I installed ThinkVantage System Update 4.03 and used it to install most of the available Lenovo updates. Big mistake. I'll spare you a detailed account of the hours I wasted troubleshooting, rolling back to previous restore points, and doing more troubleshooting, but it turns out that installing Intel Matrix Storage Manager driver v. 8.9.2.1002 caused Windows Update and Windows Validation to fail.
Symptoms: Windows Update control panel can't check for updates and reports that the Windows Update service isn't running when it actually is. Online Windows Validation fails and the standalone Windows Validation utility won't install. Microsoft programs that require a validated copy of Windows (e.g., Microsoft Security Essentials) won't install.
Solution: Roll back the driver for the relevant SATA controller to the previous driver.
I've reinstalled ThinkVantage System Update 4.03 and hidden the proposed Intel Matrix Storage Manager update; since then, I've used it to complete my Lenovo updates without issue.
I hope this post will help other people with this problem find the solution a lot faster than it took me!

This happened after installing a new advanced format drive with 4k-byte sectors, I'd guess. If the storage driver doesn't report the physical sector size to Windows, update fails.
I just ran across this myself (again) putting Win 7 on a T400.
I don't know why this is still going on. It may be that the update lists for older machines still have pre-AF-drive drivers listed.
FYI, another fix is going to the Intel site and installing the latest Matrix Storage Manager AHCI driver. This may be more desirable than rolling back to an older driver in some cases.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Import Manager Usage : Approaches for developing Import file structure and text validations

Hi Experts,
We are having 50+ import maps. We have provided option to users to drop the files for data import. Currently Import Manager(7.1 Sp08) does not have capability of pre-import validation of file data such as
a. file structure - number of columns specific to import map
b. file text validations - special characters, empty lines, empty cells
c. Uniqueness of the records in the file
For this, we are planning to build temporary folder(port specific) in which user drops in the file. We use the custom development to do above mentioned validations and then move the files to actual import ports.
Please let us know if you have worked on similar requirements and how you have fulfilled such requirements.
Regards,
Ganga

Hi Ganga,
Assuming you have a well defined xsd and are getting valid xmls from source in the Inbound Port of MDM. Also,you have a Primary key in form of External ID (say).
So just by making and defining a XSD you get most of what you want in your questions a and b.
Now if you wish to use PI to drop files in the inbound port then you can build all the validations in PI itself and you would not need Staging table.
Otherwise,you can have another table (preferably Main table) in the same repository or other dummy repository where records are created on import based on External ID.
Here you can launch an MDM workflow on import of these records and run assignments to replace unwanted characters and Validations to give error for rejecting some records based on the data quality level desired.Once unwanted characters are removed and data is validated it can be syndicated using a syndication step in the Workflow.So records which fail are not sent and which pass are sent to a outbound port.
From the outbound port PI or some other job can pick the file from this outbound folder and drop to Inbound folder of the same repository which imports to the required Primary Main table.Here again you have the option to leverage validations in PI and further check if data is fine.
Once this activity is done you can delete the records from the staging table.
Thanks,
Ravi

OLE DB Destination" failed validation and returned validation status "VS_ISBROKEN.

Similar Messages

Maybe you are looking for