OMB error with exporting a snapshot

Hi all
I am trying to export a snapshot from my repository with little luck.
OMB+> OMBEXPORT MDL_FILE 'c:\snap.mdl' \
FROM PROJECT 'PROJECT' \
COMPONENTS (SNAPSHOT 'bob') \
OUTPUT LOG TO 'c:\snap.log'OMB05114: Cannot have SNAPSHOT and other object types in the same OMBEXPORT command.
Any thoughts? I can export the collection I used to make the snapshot but not the snapshot ..
I forgot to mention: I am using OWB10gR2
cheers,
Borkur
Message was edited by:
borkur

Hi Borkur,
For exporting snapshots the syntax is -
OMBEXPORT MDL_FILE '<filename>' COMPONENTS (SNAPSHOT '<snapshot name>') OUTPUT LOG '<log name>'.
No need to specify the FROM PROJECT clause.
I tested the above and it works.
HTH
Mahesh

Similar Messages

Error With Export/Print from Crystal Report Viewer

Hello there,
I've searched through the web and SAP discussion boards with not much luck with this issue.
After working through this for some days now I've decided to look here for help.
Environment:
I have created a web Crystal Report viewer application(Developed with SBOP BI Platform 4.0 SP06 .NET SDK Runtime) that communicates with a managed Cyrstal Server 2011 SP4 (Product 14.0)
I am able to connect and authenticate with the server, retrieve a token for communication and display reports in the Crystal report Viewer successfully.
Problem:
When I attempt to export, I receive the prompt to select format and pages.
When I click export after selections most times I receive an error with the text
Unable to cast COM object of type 'System.__ComObject' to interface type 'CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{74EEBC42-6C5D-11D3-9172-00902741EE7C}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
Other times the page simply refreshes on export.
When I click to print, no print dialog is displayed the page always refreshes and no error is displayed.
No Print or Export document is ever created.
As many print/export issues seems to be related, I'm guessing this two issues are as well.
Notes:
I am utilizing the ReportClientDocument model
I am storing this in session to use as the crystal report viewer report source on postbacks
I am assigning a subset of export formats to the crystal report viewer
I am setting particular parameters as well on the report source
At this point I would appreciate every assistance I may receive on this issue
Thanks in advance,
Below is the pertinent code
Code:
<aspx>
   <CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server"
   AutoDataBind="true" EnableDatabaseLogonPrompt="False"
   BestFitPage="False" ReuseParameterValuesOnRefresh="True"
CssClass="reportFrame" Height="1000px" Width="1100px" EnableDrillDown="False"
ToolPanelView="None" PrintMode="Pdf"/>
<Codebehind>
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using CrystalDecisions.Enterprise;
using CrystalDecisions.ReportAppServer.ClientDoc;
using CrystalDecisions.ReportAppServer.CommonObjectModel;
using CrystalDecisions.ReportAppServer.Controllers;
using CrystalDecisions.ReportAppServer.DataDefModel;
using CrystalDecisions.ReportAppServer.ReportDefModel;
using CrystalDecisions.Shared;
namespace ClassicInternalReportPage
    public partial class Reports : System.Web.UI.Page
        protected override void OnInit(EventArgs e)
            base.OnInit(e);
            if (!String.IsNullOrEmpty(Convert.ToString(Session["LogonToken"])) && !IsPostBack)
                SessionMgr sessionMgr = new SessionMgr();
                EnterpriseSession enterpriseSession = sessionMgr.LogonWithToken(Session["LogonToken"].ToString());
                EnterpriseService reportService = enterpriseSession.GetService("RASReportFactory");
                InfoStore infoStore = new InfoStore(enterpriseSession.GetService("InfoStore"));
                if (reportService != null)
                    string queryString = String.Format("Select SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS "
                       + "Where SI_PROGID='CrystalEnterprise.Report' "
                       + "And SI_ID = {0} "
                       + "And SI_INSTANCE = 0", Request.QueryString["rId"]);
                    InfoObjects infoObjects = infoStore.Query(queryString);
                    ReportAppFactory reportFactory = (ReportAppFactory)reportService.Interface;
                    if (infoObjects != null && infoObjects.Count > 0)
                        ISCDReportClientDocument reportSource = reportFactory.OpenDocument(infoObjects[1].ID, 0);
                        Session["ReportClDocument"] = AssignReportParameters(reportSource) ? reportSource : null;
                        CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
                        CrystalReportViewer1.DataBind();
            //Viewer options
            // Don't enable prompting for Live and Custom
            CrystalReportViewer1.EnableParameterPrompt = !(Request.QueryString["t"] == "1" || Request.QueryString["t"] == "4");
            CrystalReportViewer1.HasToggleParameterPanelButton = CrystalReportViewer1.EnableParameterPrompt;
            CrystalReportViewer1.AllowedExportFormats = (int)(ViewerExportFormats.PdfFormat | ViewerExportFormats.ExcelFormat | ViewerExportFormats.XLSXFormat | ViewerExportFormats.CsvFormat);
        protected void Page_Load(object sender, EventArgs e)
            if (IsPostBack && CrystalReportViewer1.ReportSource == null)
                CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
                CrystalReportViewer1.DataBind();
        private bool AssignReportParameters(ISCDReportClientDocument reportSource)
            bool success = true;
            if (Request.QueryString["t"] == "1" || Request.QueryString["t"] == "2" || Request.QueryString["t"] == "4" )
                reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "STORE", Session["storeParam"]);
                if (Request.QueryString["t"] == "2")
                    reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "FromDate", Request.QueryString["fromdate"]);
                    reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "ToDate", Request.QueryString["todate"]);
            else if (Request.QueryString["t"] == "3")
                reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "SKU", Request.QueryString["sku"]);
            else
                //Unknown report type alert
                success = false;
            return success;

Thanks Don for your response,
I'm new to the SCN spaces and my content has been moved a couple of times already.
In response to your questions
The runtime is installed on the web application server, if by that you mean the machine hosting the created .NET SDK application.
My question was whether it was also required on the Crystal Server 2011 (I.E. the main enterprise server with CMS and Report management and I guess RAS and all that). I figured this would remain untouched and queries would simply be made against it to retrieve/view reports e.t.c
If install of the SDK on Crystal Server 2011 is indeed required should I expect any interruption to any of the core services after a restart. I.E. I'm hoping that none of the SDK objects would interfere with the existing server objects (in SAP Business Objects)Reason I ask is I note that much of the SDK install directories are similar to the existing Crystal Enterprise Server 2011 (Product 14.0.0)
Is this temp folder to be manually created/configured or is it created by the application automatically to perform tasks. Or are you referring to the default C:\Windows\Temp directory and so saying that the application would try to use this for print and export tasks?Once I'm sure which I'd give the app pool user permission
Printing is to be client side but I figured by default (with the Crystal Report Viewer) it would simply pool and print from the user's printer. This is how it works with the previously used URL reporting approach (viewrpt.cwr). Therefore a user can print the document from wherever they are with their own printer.We don't intend on printing from the server machine, but are you suggesting that a printer must be installed on server (which one web or enterprise server) for any client side printing to work.
App pool is running in 32 bit mode
Initially didn't get anything useful from fiddler but I'd try and look closer on your suggestion.
It's also possible that some of my questions are a misunderstanding of APP vs RAS vs WEB, so please feel free to clarify. Currently I see the Web server as simply the created .NET SDK Application and RAS (Crystal Server 2011 e.t.c) as the existing fully established Application server which I simply pool for information.
Thank you for your patience and advice,

Syntax Error with EXPORT statement in ECC 6

Hi All,
I have one issue with EXPORT statement syntax.
I have declared data like below:
DATA: BEGIN OF mem_id,
          mandt LIKE sy-mandt,
          uname LIKE sy-uname,
          modno LIKE sy-modno,
        END OF mem_id.
export the memory id
    EXPORT E_VBKOK XANZPK TEXTTAB XBOLNR TO MEMORY ID MEM_ID.
When I am checking the syntax error i am getting like "MEM_ID" must be a character-type field (data type C, N, D or T). by "INTERFACE". by "INTERFACE". "INTERFACE". by "INTERFACE". by "INTERFACE".
I know this statement would be like IMPORT ITAB TO JTAB FROM MEMORY ID 'table'. So I have written like below
EXPORT E_VBKOK XANZPK TEXTTAB XBOLNR TO MEMORY ID 'MEM_ID'. But still it is throwing an error.
Can you please let me know how can I resolve this?
Regards,
Jyothi CH.

Hi Jyothi,
data: l_var type string.
concatenate '6' '8' into l_var separated by space.
export l_var to memory id 'BB'.
Here we have to declare the type(structure) for l_var not for BB
and in another program
data:l_var type string.
import l_var from memory id 'BB'.
write : l_var.

Flash CC error with exported mov

I'm trying to export my animation as a mov file and it does so successfuly. Then when I try to open it with Quicktime it says there is an error and can not open it. The error states "The movie can't be opened because the file is not in a format that QuickTime Player understands."
On top of that, when Adobe Media Encoder CC opens up it also states there is an error with the file.
I am exporting as a video and haven't chosen any settings that are out of the ordinary. Why is the export not working?
D

Hi Sarah,
I have just tried the Video Export of the file that you have provided vincecamuto-600x150-2.fla and it looks like it is working as expected.
I have used Flash CC 2014 and Windows 7 and QuikTime Player 7.7.2
Please let me now your Flash version and OS details if they are different from the one mentioned above.
Have posted the exported video at http://adobe.ly/1m3CYpf
Thanks!
Mohan

Error with export | ORA-4063

Hi all,
I am facing an issue with export backup of oracle database version 10.2.0.1 on RHEL 5 server.
export terminates with warnings and the export log shows following error:
EXP-00008: ORACLE error 4063 encountered
ORA-04063: package body "SYS.DBMS_CDC_UTILITY" has errors
ORA-06508: PL/SQL: could not find program unit being called: "SYS.DBMS_CDC_UTILITY"
However, the tables get exported and this error is thrown only while exporting procedural objects and actions:
DBA registry shows component OLAP and OLAP catalog are invalid.
Alert log repeatedly shows the following errors:
ORA-12012: error on auto execute of job 42568
ORA-04063: ORA-04063: package body "SYS.DBMS_LOCK" has errors
ORA-06508: PL/SQL: could not find program unit being called: "SYS.DBMS_LOCK"
ORA-06512: at "EXFSYS.DBMS_RLMGR_DR", line 2907
ORA-01403: no data found
ORA-06512: at line 1
Have tried reinstalling OLAP by using the following method:
deinstall:
SQL> conn / as sysdba
----> Remove OLAP Catalog
SQL> @?/olap/admin/catnoamd.sql
----> Remove OLAP API
SQL> @?/olap/admin/olapidrp.plb
SQL> @?/olap/admin/catnoxoq.sql
----> Deinstall APS - OLAP AW component
SQL> @?/olap/admin/catnoaps.sql
----> Recompile everything
SQL> @?/rdbms/admin/utlrp.sql
reinstall:
SQL> conn /as sysdba
SQL> @?/olap/admin/olap.sql SYSAUX TEMP;
Still OLAP and OLAP catalog are invalid.
There are only 6 objects invalid under sys schema(including dbms_lock package) and 4 objects invalid under
olapsys schema.
Is this got something to do with sequences?
However there is no issue on the application level and no complaints from users.
Any help would be appreciated.
Thanks in advance!!
Rahul Singh.

Have you run utlirp.sql and utlrp.sql ? These MOS Docs may help
762658.1 - How To Resolve ORA-39127 "ORA-29532: Java Call terminated" During Datapump Export
296187.1 - How To Manually Install Oracle OLAP into a 9i, 10g or 11g database After the DB Has Been Created
Srini

Logical standby error with export dump

oracal 10g have a setup logical standby and when i am running export dump from logical i got this error.
EXP-00008: ORACLE error 16224 encountered
ORA-16224: Database Guard is enabled
EXP-00000: Export terminated unsuccessfully
can someone help me out how can it posibal to take export dump and datapump from logical standby.
thanks

16224, 00000, "Database Guard is enabled"
// *Cause: Operation could not be performed because database guard is enabled
// *Action: Verify operation is correct and disable database guard

Generating error with export to PDF action

Hi,<br>
After we have implemented Nakisa OrgChart Accelerated (live solution) successfully, we installed export pack 3.0 correctly. If we want to export an OrgChart to PDF a message pops up saying that an error occurred while generating the file.<br>
What is/can causing this?<br>
Thanks in advance,<br>
Bruno

Hi Bruno,
I know that the PDF functionality only works after Service Pack 1.0 has been installed because of some content in the CSS files in the Themes folder. I am unsure if implementing this element or the whole of Service Pack 1.0 would fix this for Accelerated because of potential style changes, but you could try it. I believe the files are orgChartTheme.css and NOMSStyle1.css.
I hope that helps.
Luke

Error with Export Scorecard Functionality

All -
When I try to utilize the 'Export' scorecard functionality in SSM 7.0, I get the following error message:
"Error opening Excel Automation Server can't create object. This can be cause by:
-Application is not installed on your machine
-Browser security does not allow ActiveX scripts
-You were prompted to run ActiveX and you said No,
If that is the case, close all browser instances and reopen"
Does anyone know why? Are there specific internet explorer settings that I should look at for fixing this issue?
Jason

Jason,
Active X is required to run certain functions of SSM. In Outlook > Tools > Internet Options > Security (tab) > Internet > Custom Settings
There are a number of different Active X settings. Change all of them to ENABLE - EXCEPT FOR THE FOLLOWING:
- Download signed Active X controls - change to PROMPT
- Download unsigned Active X controls - change to PROMPT
- Initialize and script Active X controls not mark as safe - leave as DISABLE
They other possible issue would be not having Excel installed. Just to mention that if you are working at the server level, there would have to be Excel installed at the server as well. Probably not your issue, but bring it up since often server won't have the full compliment of supporting applications installed at that level.
Regards,
Bob

EA1 - Error with exporting output to xls

Hi,
I've experiencing error when I try to export output to xls format.
Error data showed below.
OS Win XP Pro SP2
DB Oracle 11g
Export Data -> xls
Output -> Clipboard or File
java.lang.NumberFormatException
     at java.math.BigDecimal.<init>(BigDecimal.java:368)
     at java.math.BigDecimal.<init>(BigDecimal.java:647)
     at oracle.dbtools.raptor.format.ExcelFormatter.printColumn(ExcelFormatter.java:170)
     at oracle.dbtools.raptor.format.ui.TableFormatterWrapper.print(TableFormatterWrapper.java:114)
     at oracle.dbtools.raptor.format.ResultsFormatter.print(ResultsFormatter.java:173)
     at oracle.dbtools.raptor.format.ResultsFormatter$1.doWork(ResultsFormatter.java:133)
     at oracle.ide.dialogs.ProgressRunnable.run(ProgressRunnable.java:161)
     at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:615)
     at java.lang.Thread.run(Thread.java:595)
Message was edited by:
msutic

This bug was logged and fixed last week, but did not make the build you have. This fix will be in the next Early Adopter drop. I am unable to give you the bug number at this point.
Regards
Sue

[Error during Export] R3load exited with return code 11

Hi guys,
While performing and Unicode Migration, during Export Phase, Migration Monitor returned the following error while exporting a package
ERROR: 2014-06-01 10:57:44 com.sap.inst.migmon.LoadTask run
Unloading of 'REGUC' export package is interrupted with R3load error.
Process '/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error' exited with return code 11.
For mode details see 'REGUC.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
REGUC.log details:
(As you see, it does not provide reasons of this error, all messages are informative and alike all other Packages logs)
/usr/sap/ECP/DVEBMGS00/exe/R3load: START OF LOG: 20140601105052
/usr/sap/ECP/DVEBMGS00/exe/R3load: sccsid @(#) $Id: //bas/740_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
/usr/sap/ECP/DVEBMGS00/exe/R3load: version R7.40/V1.8
Compiled Jul 23 2013 21:30:53
/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC001.xml" created.
(GSI) INFO: dbname   = "ECP20030615080638
(GSI) INFO: vname    = "ORACLE "
(GSI) INFO: hostname = "ecp "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release = "5.10"
(GSI) INFO: version = "Generic_142900-13"
(GSI) INFO: machine = "sun4u"
Tried to find what does R3load Return Code 11 means, but I couldnt find further information on this.
Any hint of what is causing this error?
(Please disregard any Filesystem issues since all of them have available space)
Best!

After using latest R3load patch, it provides furher information on the log file.
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.070) R3ldctl: fix CDS views creation in upgrade export mode (note 2
017805)
DBSL patchinfo (patches.h): (0.022) Smaller corrections in release 7.40 (th, dp, vmc, dpmon)
(note 1821404)
--------------------- End of patch information -------------------------
process id 27326
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC003.xml" created.
(GSI) INFO: dbname   = "ECP20030615080638
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "ecp                                                             "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release = "5.10"
(GSI) INFO: version = "Generic_142900-13"
(GSI) INFO: machine = "sun4u"
(GSI) INFO: instno   = "6120023288"
(RTF) ########## WARNING ###########
        Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: cannot find version token "ver:" at line 1
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: unknown file format, assuming version 2
(EXP) INFO: table REGUC will be exported with sorting (task modifier)
------------------ C-STACK ----------------------
[0] t_splay ( 0x1020df850, 0xb3, 0x4386, 0x100a02078, 0x0, 0x1020df870 ), at 0xffffffff7b9629
94
[1] t_delete ( 0x1020df850, 0x4348, 0x1d9870, 0x1000d0408, 0xffffffff7bb3c000, 0x0 ), at 0xff
ffffff7b9627e4
[2] realfree ( 0x101ee7590, 0x1f82b1, 0x1d9cd0, 0x1f82b0, 0xffffffff7bb3c000, 0x101ee7590 ),
at 0xffffffff7b9623b0
[3] _malloc_unlocked ( 0x7d40, 0x200000, 0x101edf840, 0x0, 0x101ee7580, 0x0 ), at 0xffffffff7
b961eb4
[4] malloc ( 0x7d39, 0x2388, 0x1da428, 0x10038fe84, 0xffffffff7bb3c000, 0x2000 ), at 0xffffff
ff7b961c28
[5] rstg_get ( 0x2, 0x0, 0x2, 0x7d10, 0x0, 0x10077d8c0 ), at 0x10038ff4c
[6] c3_uc_new_cache ( 0x100a02078, 0x284db0, 0x284c00, 0x10077d8c0, 0x100a02108, 0xb3 ), at 0
x1000d1ce8
[7] c3_uc_seek_cache ( 0xb3, 0xff79, 0xffffffff7ffcae3e, 0x100a02078, 0x10189fa48, 0x10077d8c
0 ), at 0x1000d188c
[8] c3_uc_new_tabcache ( 0x0, 0xb3, 0x4386, 0x100a02078, 0xb3, 0x10077d8c0 ), at 0x1000d13fc
[9] c3_uc_insert_record_in_cache ( 0xffffffff7ffcb04e, 0x10189fa48, 0x100a02078, 0x100a024c8,
0xb3, 0x1058c8f84 ), at 0x1000d0408
[10] c3_uc_insert ( 0x0, 0x100a02078, 0x0, 0x0, 0x10077d8c0, 0xffffffff7ffcb04e ), at 0x1000c
f944
[11] c3_uc_convert_table_entry ( 0x1015c61f8, 0x0, 0x100a02078, 0x0, 0x10189f408, 0x31a000 ),
at 0x1000ce314
[12] c3_uc_convert_logic_table ( 0x1015c61f8, 0x100a02078, 0x0, 0x4a, 0x100638dc0, 0x10077d8c
0 ), at 0x1000cdb18
[13] c3_uc_convert_cluster_data ( 0x100a02078, 0xffffffff7ffcbc50, 0x1015c6428, 0x1015c61f8,
0x10077d8c0, 0x0 ), at 0x1000cd10c
[14] c3_uc_convert_cluster_item ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x1038
6f6e0, 0xffffffff7ffcbb8c, 0x100a02812 ), at 0x1000be1d4
[15] process_task ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x100a02810, 0x10063
32e0, 0x10077d8c0 ), at 0x1000b2f58
[16] CnvCluster ( 0x1014642d0, 0x100954670, 0x100aa9610, 0x2849b8, 0x284800, 0x6cb978 ), at 0
x1000b1f8c
[17] cnv_clust2 ( 0x100aa9580, 0xffffffff7ffcc258, 0x100954770, 0xfc0, 0x107d00, 0x100954670
), at 0x100062714
[18] cnv_cp ( 0x100aa9580, 0xffffffff7ffcc258, 0x100aa95e0, 0x0, 0x10077d8c0, 0x1d6c00 ), at
0x100064644
[19] process_buffer ( 0x100aa9580, 0xffffffff7ffcc258, 0xfff00, 0x100a97bd0, 0x10, 0x100aa95b
0 ), at 0x10007162c
[20] execute_table_unload ( 0xffffffff7ffed610, 0xffffffff7ffdc4b0, 0x0, 0x100aa9580, 0xfffff
fff7ffcc258, 0x10077d8c0 ), at 0x10006c488
[21] export_table_task ( 0xffffffff7ffed610, 0x0, 0xffffffff7ffdc368, 0xffffffff7ffcc330, 0xf
fffffff7ffeedb8, 0xffffffff7ffeec60 ), at 0x10006c934
[22] db_unload ( 0x100a97b0d, 0xffffffff7ffed610, 0x0, 0x10077d8c0, 0xffffffff7ffeec60, 0xfff
fffff7bb47540 ), at 0x10006d148
[23] main_r3ldmain ( 0x72ec00, 0xffffffff7ffff448, 0xffffffff7ffff228, 0xffffffff7bb47540, 0x
1005fc290, 0x0 ), at 0x1000514e0

Import and Export MDL error with OWB Release 2

Getting the following error when importing and exporting MDL - any assist would be appreciated - never had this issue with previous releases - error as follows:
Error occurred exporting metadata to file "C:\TEMP\MY_PROJECT-20061208_1058.mdl".
java.lang.Exception: CNV0002-0038(ERROR): Cannot write to file ./../../reposasst/converter.properties. Please make sure that write privileges are enabled or that disk is not full.

I got the solution. OWB writes some temporary xml files before importing/exporting mdl and these files are stored in OWB home directory. The problem is write privileges on the OWB Home directory. I am not local admin of my system. Admin installed the OWB client on my system through his userid. Now if i try to create a directory or file in OWB home directory it thorws an error "Access Denied". I got the Admin rights on my local system for my userid and now OWB is working fine.
Thanks.

Materialized View with "error in exporting/importing data"

My system is a 10g R2 on AIX (dev). When I impdp a dmp from other box, also 10g R2, in the dump log file, there is an error about the materialized view:ORA-31693: Table data object "BAANDB"."MV_EMPHORA" failed to load/unload and is being skipped due to error:
ORA-02354: error in exporting/importing data
Desc mv_emphora
Name              Null?    Type
C_RID                      ROWID
P_RID                      ROWID
T$CWOC            NOT NULL CHAR(6)
T$EMNO            NOT NULL CHAR(6)
T$NAMA            NOT NULL CHAR(35)
T$EDTE            NOT NULL DATE
T$PERI                     NUMBER
T$QUAN                     NUMBER
T$YEAR                     NUMBER
T$RGDT                     DATEAs i ckecked here and Metalink, I found the info is less to do with the MV? what was the cause?

The total lines are 25074. So I used the GREP from the OS to get the lines involved with the MV. Here are:
grep -n -i "TTPPPC235201" impBaanFull.log
5220:ORA-39153: Table "BAANDB"."TTPPPC235201" exists and has been truncated. Data will be loaded but all dependent metadata will be skipped due to table_exists_action of truncate
5845:ORA-39153: Table "BAANDB"."MLOG$_TTPPPC235201" exists and has been truncated. Data will be loaded but all dependent meta data will be skipped due to table_exists_action of truncate
8503:. . imported "BAANDB"."TTPPPC235201"                     36.22 MB 107912 rows
8910:. . imported "BAANDB"."MLOG$_TTPPPC235201"               413.0 KB    6848 rows
grep -n -i "TTCCOM001201" impBaanFull.log
4018:ORA-39153: Table "BAANDB"."TTCCOM001201" exists and has been truncated. Data will be loaded but all dependent metadata will be skipped due to table_exists_action of truncate
5844:ORA-39153: Table "BAANDB"."MLOG$_TTCCOM001201" exists and has been truncated. Data will be loaded but all dependent metadata will be skipped due to table_exists_action of truncate
9129:. . imported "BAANDB"."MLOG$_TTCCOM001201"               9.718 KB      38 rows
9136:. . imported "BAANDB"."TTCCOM001201"                     85.91 KB     239 rows
grep -n -i "MV_EMPHORA" impBaanFull.log
8469:ORA-39153: Table "BAANDB"."MV_EMPHORA" exists and has been truncated. Data will be loaded but all dependent metadata will be skipped due to table_exists_action of truncate
8558:ORA-31693: Table data object "BAANDB"."MV_EMPHORA" failed to load/unload and is being skipped due to error:
8560:ORA-12081: update operation not allowed on table "BAANDB"."MV_EMPHORA"
25066:ORA-31684: Object type MATERIALIZED_VIEW:"BAANDB"."MV_EMPHORA" already exists
25072: BEGIN dbms_refresh.make('"BAANDB"."MV_EMPHORA"',list=>null,next_date=>null,interval=>null,implicit_destroy=>TRUE,lax=>
FALSE,job=>44,rollback_seg=>NULL,push_deferred_rpc=>TRUE,refresh_after_errors=>FALSE,purge_option => 1,parallelism => 0,heap_size => 0);
25073:dbms_refresh.add(name=>'"BAANDB"."MV_EMPHORA"',list=>'"BAANDB"."MV_EMPHORA"',siteid=>0,export_db=>'BAAN'); END;the number in front of each line is the line number of the import log.
Here is my syntax of import pmup:impdp user/pw SCHEMAS=baandb DIRECTORY=baanbk_data_pump DUMPFILE=impBaanAll.dmp LOGFILE=impBaanAll.log TABLE_EXISTS_ACTION=TRUNCATEYes I can create the MV manually and I have no problem to refresh manually it after the inmport.

Hi, errors with raw type in export

how export data type raw?
thanks

Hi,
not error, data type is different example:
in table ORA_ASPNET_USERS field userID = 85D35FBDD42C4BB898085500ECFBD786 and with export equals 'A@345B'How did you verified the above change (mismatch) ?
Have you imported back to different schema/segment and verified against the orginal table ?
Can you elaborate more on the above
- Pavan Kumar N

When I try to export a photo to my desktop I get the followiing error message "Export Versions Complete with Errors" any ideas why?

when I try to export a photo to my desktop I get the followiing error message "Export Versions Complete with Errors" any ideas why?

Have you tried to export different images as a test to see if it is related to the one you are getting the error on? Also try to export to a different folder other then the Desktop, again to see if the problem is connected to that folder.
Another thing to do is run the Aperture Library First Aid on the library. Hold the option and command keys down while you start Aperture. First run the Permission Repair and see if that helps. If not quit Aperture and restart and run the Library Repair and try.
Post back if you still have problems
regards

Error with first attempts at exporting flash

The first thing I tried when with CS3 is exporting a project to flash... I got an error with this first attempt which was a CS2 project so I made an all new project just to see it...same message - here it is.
a DOS window message...
"OMP abort: Initializing libguide.lib, but found libguide40.lib already initialized.
This can cause performance degradation.
Set environment variable KMP_DUPLICATE_LIB_OK=TRUE if you want your program to continue in this case."
and an error message pop up window that reads...
"The instruction at '0x186925ab' referenced memory at '0x00000008'. The memory could not be 'reead'. Click on OK to terminate the program"
Oh I get it! Yeah no I don't. Anybody familiar?

I called adobe customer support, they are clueless. It is now December (4 months after the first post) This is a linking problem, and the developers are at fault. This is a true bug and not a problem with your computer.
The fix is as follows (windows xp)
Add the environment variable KMP_DUPLICATE_LIB_OK=TRUE to windows to fix it. In other words, do what it says.
1. On the Desktop, Right click on My computer and choose properties
2. Go to the Advanced Tab and click on the environment variables button
3. for the top window (user variables) click New.
4. In variable name enter KMP_DUPLICATE_LIB_OK (all uppercase and include the underscores)
5. In the Variable value enter TRUE (all uppercase)
6. Click ok
7. Do the same thing for second window (system variables)
8. You should not need to restart your computer, just restart encore.
If this does not work for you, you either misspelled the variables, or did not capitalize. If it still does not work for you, you may be out of luck.

OMB error with exporting a snapshot

Similar Messages

Maybe you are looking for