[Error during Export] R3load exited with return code 11

Hi guys,
While performing and Unicode Migration, during Export Phase, Migration Monitor returned the following error while exporting a package
ERROR: 2014-06-01 10:57:44 com.sap.inst.migmon.LoadTask run
Unloading of 'REGUC' export package is interrupted with R3load error.
Process '/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error' exited with return code 11.
For mode details see 'REGUC.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
REGUC.log details:
(As you see, it does not provide reasons of this error, all messages are informative and alike all other Packages logs)
/usr/sap/ECP/DVEBMGS00/exe/R3load: START OF LOG: 20140601105052
/usr/sap/ECP/DVEBMGS00/exe/R3load: sccsid @(#) $Id: //bas/740_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
/usr/sap/ECP/DVEBMGS00/exe/R3load: version R7.40/V1.8
Compiled Jul 23 2013 21:30:53
/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC001.xml" created.
(GSI) INFO: dbname   = "ECP20030615080638
(GSI) INFO: vname    = "ORACLE "
(GSI) INFO: hostname = "ecp "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release = "5.10"
(GSI) INFO: version = "Generic_142900-13"
(GSI) INFO: machine = "sun4u"
Tried to find what does R3load Return Code 11 means, but I couldnt find further information on this.
Any hint of what is causing this error?
(Please disregard any Filesystem issues since all of them have available space)
Best!

After using latest R3load patch, it provides furher information on the log file.
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.070) R3ldctl: fix CDS views creation in upgrade export mode (note 2
017805)
DBSL patchinfo (patches.h): (0.022) Smaller corrections in release 7.40 (th, dp, vmc, dpmon)
(note 1821404)
--------------------- End of patch information -------------------------
process id 27326
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC003.xml" created.
(GSI) INFO: dbname   = "ECP20030615080638
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "ecp                                                             "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release = "5.10"
(GSI) INFO: version = "Generic_142900-13"
(GSI) INFO: machine = "sun4u"
(GSI) INFO: instno   = "6120023288"
(RTF) ########## WARNING ###########
        Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: cannot find version token "ver:" at line 1
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: unknown file format, assuming version 2
(EXP) INFO: table REGUC will be exported with sorting (task modifier)
------------------ C-STACK ----------------------
[0] t_splay ( 0x1020df850, 0xb3, 0x4386, 0x100a02078, 0x0, 0x1020df870 ), at 0xffffffff7b9629
94
[1] t_delete ( 0x1020df850, 0x4348, 0x1d9870, 0x1000d0408, 0xffffffff7bb3c000, 0x0 ), at 0xff
ffffff7b9627e4
[2] realfree ( 0x101ee7590, 0x1f82b1, 0x1d9cd0, 0x1f82b0, 0xffffffff7bb3c000, 0x101ee7590 ),
at 0xffffffff7b9623b0
[3] _malloc_unlocked ( 0x7d40, 0x200000, 0x101edf840, 0x0, 0x101ee7580, 0x0 ), at 0xffffffff7
b961eb4
[4] malloc ( 0x7d39, 0x2388, 0x1da428, 0x10038fe84, 0xffffffff7bb3c000, 0x2000 ), at 0xffffff
ff7b961c28
[5] rstg_get ( 0x2, 0x0, 0x2, 0x7d10, 0x0, 0x10077d8c0 ), at 0x10038ff4c
[6] c3_uc_new_cache ( 0x100a02078, 0x284db0, 0x284c00, 0x10077d8c0, 0x100a02108, 0xb3 ), at 0
x1000d1ce8
[7] c3_uc_seek_cache ( 0xb3, 0xff79, 0xffffffff7ffcae3e, 0x100a02078, 0x10189fa48, 0x10077d8c
0 ), at 0x1000d188c
[8] c3_uc_new_tabcache ( 0x0, 0xb3, 0x4386, 0x100a02078, 0xb3, 0x10077d8c0 ), at 0x1000d13fc
[9] c3_uc_insert_record_in_cache ( 0xffffffff7ffcb04e, 0x10189fa48, 0x100a02078, 0x100a024c8,
0xb3, 0x1058c8f84 ), at 0x1000d0408
[10] c3_uc_insert ( 0x0, 0x100a02078, 0x0, 0x0, 0x10077d8c0, 0xffffffff7ffcb04e ), at 0x1000c
f944
[11] c3_uc_convert_table_entry ( 0x1015c61f8, 0x0, 0x100a02078, 0x0, 0x10189f408, 0x31a000 ),
at 0x1000ce314
[12] c3_uc_convert_logic_table ( 0x1015c61f8, 0x100a02078, 0x0, 0x4a, 0x100638dc0, 0x10077d8c
0 ), at 0x1000cdb18
[13] c3_uc_convert_cluster_data ( 0x100a02078, 0xffffffff7ffcbc50, 0x1015c6428, 0x1015c61f8,
0x10077d8c0, 0x0 ), at 0x1000cd10c
[14] c3_uc_convert_cluster_item ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x1038
6f6e0, 0xffffffff7ffcbb8c, 0x100a02812 ), at 0x1000be1d4
[15] process_task ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x100a02810, 0x10063
32e0, 0x10077d8c0 ), at 0x1000b2f58
[16] CnvCluster ( 0x1014642d0, 0x100954670, 0x100aa9610, 0x2849b8, 0x284800, 0x6cb978 ), at 0
x1000b1f8c
[17] cnv_clust2 ( 0x100aa9580, 0xffffffff7ffcc258, 0x100954770, 0xfc0, 0x107d00, 0x100954670
), at 0x100062714
[18] cnv_cp ( 0x100aa9580, 0xffffffff7ffcc258, 0x100aa95e0, 0x0, 0x10077d8c0, 0x1d6c00 ), at
0x100064644
[19] process_buffer ( 0x100aa9580, 0xffffffff7ffcc258, 0xfff00, 0x100a97bd0, 0x10, 0x100aa95b
0 ), at 0x10007162c
[20] execute_table_unload ( 0xffffffff7ffed610, 0xffffffff7ffdc4b0, 0x0, 0x100aa9580, 0xfffff
fff7ffcc258, 0x10077d8c0 ), at 0x10006c488
[21] export_table_task ( 0xffffffff7ffed610, 0x0, 0xffffffff7ffdc368, 0xffffffff7ffcc330, 0xf
fffffff7ffeedb8, 0xffffffff7ffeec60 ), at 0x10006c934
[22] db_unload ( 0x100a97b0d, 0xffffffff7ffed610, 0x0, 0x10077d8c0, 0xffffffff7ffeec60, 0xfff
fffff7bb47540 ), at 0x10006d148
[23] main_r3ldmain ( 0x72ec00, 0xffffffff7ffff448, 0xffffffff7ffff228, 0xffffffff7bb47540, 0x
1005fc290, 0x0 ), at 0x1000514e0

Similar Messages

CcmSetup is exiting with return code 0 Need Help

Installing SCCM Client on Window 7 Machine, Examining the log file, this caught my eye.
<![LOG[Successfully deleted the ccmsetup service]LOG]!><time="13:58:26.463-480" date="05-09-2014" component="ccmsetup" context="" type="1" thread="3656" file="ccmsetup.cpp:3345">
<![LOG[0]LOG]!><time="13:58:26.463-480" date="05-09-2014" component="ccmsetup" context="" type="1" thread="3656" file="ccmsetup.cpp:9763">
<![LOG[Deleted file C:\Windows\ccmsetup\ccmsetup.xml]LOG]!><time="13:58:26.463-480" date="05-09-2014" component="ccmsetup" context="" type="1" thread="3640" file="ccmsetup.cpp:9493">
<![LOG[Task 'Configuration Manager Client Upgrade Task' does not exist]LOG]!><time="13:58:26.463-480" date="05-09-2014" component="ccmsetup" context="" type="0" thread="3640"
file="wintask.cpp:634">
<![LOG[CcmSetup is exiting with return code 0]LOG]!><time="13:58:26.463-480" date="05-09-2014" component="ccmsetup" context="" type="1" thread="3640" file="ccmsetup.cpp:10875">
I search around this error code 0, But it seems mine is a different issue? The clients installs normally as usual, but can't see any software updates and such.
Could the Error Code 0 have cause this also? Need guidance on this matter.

You just haven't waited long enough after agent installation. Agent installation and agent communication with the site are two separate things. After successful installation, the agent still has to find the site, register with it, download policies, and
evaluate policies. This all takes a few minutes initially and after every reboot.
You can check policyagent.log and policyevaluator.log to see all of the "fun" as far as policy goes.
Jason | http://blog.configmgrftw.com
Yea I was checking all the log files specific by everyone here, nothing seems wrong or out of the ordinary. Thanks for your help, and also everyone else here, Sorry I took so long to get back to this post.

RMAN exited with return code '3' ?

I get message bellow while oracle backup to the tape.
(2960) Launching backup process
(2960) Backup process failed: RMAN exited with return code '3'.
(2960) nwora_nsrnmostart_rman: RMAN script execution is not successful. RMAN exited with return code '3'.
There is no description for the code '3'. I think it is networker license problem but i am not sure.
Any advice ?

Thank you,
yes i am. I have 10 clients and they are working fine.
I think problem is that i have just one license of oracle module for windows. Another windows client is set and working. I can't find any documentation related to error code '3'.
a test rman script is very simple:
connect target sys/*****
connect rcvcat rman/***@vas
run {
allocate channel d1 type 'sbt_tape';
release channel d1;
I get no errors in rman. It just stops at allocate channel d1 type 'sbt_tape';
error is stored in NSR log file.

RMAN Backup is failling with "RMAN exited with return code '1' " via tape.

Hi Everyone,
Backups are getting failed continously with below error.can you plese suggest me what is problem exactly
L1_OracleL1_Daily completed
Failed: ***-rac-a16-001-vip.*****.dom*
--- Unsuccessful Save Sets ---
** ***-rac-a16-001-vip.uidl1.dom:RMAN:/nsr/res/Daily_IncrDB_Backup savegrp: suppressed 43 lines of output.*
** ***-rac-a16-001-vip.uidl1.dom:RMAN:/nsr/res/Daily_IncrDB_Backup*
** ***-rac-a16-001-vip.uidl1.dom:RMAN:/nsr/res/Daily_IncrDB_Backup Recovery Manager complete.*
** ***1-rac-a16-001-vip.uidl1.dom:RMAN:/nsr/res/Daily_IncrDB_Backup The backup process failed:*
** ***1-rac-a16-001-vip.uidl1.dom:RMAN:/nsr/res/Daily_IncrDB_Backup RMAN exited with return code '1'.*
** ***1-rac-a16-001-vip.uidl1.dom:RMAN:/nsr/res/Daily_IncrDB_Backup Exiting with error:*
** ***1-rac-a16-001-vip.uidl1.dom:RMAN:/nsr/res/Daily_IncrDB_Backup RMAN exited with return code '1'.*
****-rac-a16-001-vip.uidl1.dom: RMAN exited with return code '1'.*
** ***1-rac-a16-001-vip.uidl1.dom:RMAN:/nsr/res/Daily_IncrDB_Backup*
** ***1-rac-a16-001-vip.uidl1.dom:RMAN:/nsr/res/Daily_IncrDB_Backup nsrnmostart returned status of 255*
** ***1-rac-a16-001-vip.uidl1.dom:RMAN:/nsr/res/Daily_IncrDB_Backup /usr/sbin/nsrnmobkp exiting.*
Thanks,
Prasanth

Hi Hemanth/imran,
storage team is shown below error for failure of backup in their log.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
ORA-12502: TNS:listener received no CONNECT_DATA from client
Recovery Manager complete.
The backup process failed:
RMAN exited with return code '1'.
Exiting with error:
RMAN exited with return code '1'.
uidl1-rac-a16-001-vip.uidl1.dom: RMAN exited with return code '1'.
Any changes we need to do
Thanks,
Prasanth

Restarting Client export which ended with return code 8.

Hi guys,
I have performed an client export using SCC8 and the export ended with return code 8. stating the request cannot be imported. I have fixed the errors. I would like to know how do i restart the same export instead of doing a other client export. KIndly let me know as early as possible as it is very urgent.
Naresh

Hi ,
Thanks for the reply, One of my colligue is telling no need of transport elements under the query. why means we copied (dev) one of our query and just changed the Variable to curent fiscalyear/period. now we to transport this query. My colligue is telling any way thos elements are there in old query , and telling no need to transport those. Is it correct or again we need to collect all those using elements in that query while transporting ?
we dont have access for SE03.
Thanks & Regards
Pcrao.

Codelite: Program exited with return code: 127

I installed codelite from AUR. When I try to make a simple "Hello world", this is what I get.
Not even a new window.
I try the same code in a Ubuntu machine, and it works. So I think there are some libraries missing right?

Sorry if this counts as a necropost, but I just had this same issue and managed to solve it.
Yes, the 127 means "Command not found," but it has nothing to do with user input. If you check the console, CodeLite is trying to run something like this:
/usr/bin/codelite_xterm './YourProgram ' '/bin/sh -f /usr/bin/codelite_exec ./YourProgram'
Coincidentally, if you run /usr/bin/codelite_xterm yourself with no arguments, it will still return 127. This is because it tries to invoke xterm, which isn't installed.
The CodeLite AUR package needs to depend on xterm to avoid this - I'll bother the packager.

Error during export of ECC 6.0 system for unicode conversion

We have upgraded a 4.7 system to ECC 6.0 running on MSSQL 2000. We have the latest r3load, and are using the Netweaver 7.0 sapinst to perform the system copy (export) to convert to unicode. Our goal is an exported system which we can use on a clean install once we have de-installed SAP and SQL 2000 and installed MSSQL 2005.
When running the export, the r3szchk finishes and then the next phase runs. But it gets almost all errors (so we are stopping the export).
The export_monitor.log is shown below, and also an example of one of the table logs shown here as well. but its almost as if every table hits the same problem, BSIS, MSEG, EDIDS etc.....
If you look at the ACCTIT.log, it looks like the SQL/stored preocedure error is as follows, but not sure what this means:
check NameTab width SQL DbSlRead on DDNTT_CONV_UC failed for table T002 with rc 24
Export_Monitor.log
==============
NFO: 2008-08-25 17:30:11
Export Monitor is started.
CONFIG: 2008-08-25 17:30:11
Application options:
dataCodepage=4103
dbType=MSS
exportDirs=S:\ABAP
installDir=C:\Program Files\sapinst_instdir\NW04S\LM\COPY\MSS\EXP\CENTRAL\AS\EXP
jobNum=3
loadArgs=-stop_on_error
monitorTimeout=30
orderBy=
r3loadExe=D:\usr\sap\ED0\SYS\exe\run\R3load.exe
sapinst=
server=
trace=all
tskFiles=yes
CONFIG: 2008-08-25 17:30:11
List of packages with table structure: 'SAP0000'.
CONFIG: 2008-08-25 17:30:11
List of packages with views: 'SAPVIEW'.
TRACE: 2008-08-25 17:30:11 com.sap.inst.migmon.LoadTask run
Unloading of 'ACCTIT' export package is started.
TRACE: 2008-08-25 17:30:11 com.sap.inst.migmon.LoadTask run
Unloading of 'BSIS' export package is started.
TRACE: 2008-08-25 17:30:11 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'ACCTIT' export package:
D:\usr\sap\ED0\SYS\exe\run\R3load.exe -ctf E S:\ABAP\DATA\ACCTIT.STR S:\ABAP\DB\DDLMSS.TPL ACCTIT.TSK MSS -l ACCTIT.log
TRACE: 2008-08-25 17:30:11 com.sap.inst.migmon.LoadTask run
Unloading of 'CMFP' export package is started.
TRACE: 2008-08-25 17:30:11 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'BSIS' export package:
D:\usr\sap\ED0\SYS\exe\run\R3load.exe -ctf E S:\ABAP\DATA\BSIS.STR S:\ABAP\DB\DDLMSS.TPL BSIS.TSK MSS -l BSIS.log
TRACE: 2008-08-25 17:30:11 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'CMFP' export package:
D:\usr\sap\ED0\SYS\exe\run\R3load.exe -ctf E S:\ABAP\DATA\CMFP.STR S:\ABAP\DB\DDLMSS.TPL CMFP.TSK MSS -l CMFP.log
TRACE: 2008-08-25 17:30:11 com.sap.inst.migmon.LoadTask processPackage
Unloading of 'ACCTIT' export package from database:
D:\usr\sap\ED0\SYS\exe\run\R3load.exe -e ACCTIT.cmd -datacodepage 4103 -l ACCTIT.log -stop_on_error
TRACE: 2008-08-25 17:30:11 com.sap.inst.migmon.LoadTask processPackage
Unloading of 'CMFP' export package from database:
D:\usr\sap\ED0\SYS\exe\run\R3load.exe -e CMFP.cmd -datacodepage 4103 -l CMFP.log -stop_on_error
TRACE: 2008-08-25 17:30:11 com.sap.inst.migmon.LoadTask processPackage
Unloading of 'BSIS' export package from database:
D:\usr\sap\ED0\SYS\exe\run\R3load.exe -e BSIS.cmd -datacodepage 4103 -l BSIS.log -stop_on_error
ERROR: 2008-08-25 17:30:12 com.sap.inst.migmon.LoadTask run
Unloading of 'ACCTIT' export package is interrupted with R3load error.
Process 'D:\usr\sap\ED0\SYS\exe\run\R3load.exe -e ACCTIT.cmd -datacodepage 4103 -l ACCTIT.log -stop_on_error' exited with return code 2.
For mode details see 'ACCTIT.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2008-08-25 17:30:12 com.sap.inst.migmon.LoadTask run
Unloading of 'CMFP' export package is interrupted with R3load error.
Process 'D:\usr\sap\ED0\SYS\exe\run\R3load.exe -e CMFP.cmd -datacodepage 4103 -l CMFP.log -stop_on_error' exited with return code 2.
For mode details see 'CMFP.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2008-08-25 17:30:12 com.sap.inst.migmon.LoadTask run
Unloading of 'BSIS' export package is interrupted with R3load error.
Process 'D:\usr\sap\ED0\SYS\exe\run\R3load.exe -e BSIS.cmd -datacodepage 4103 -l BSIS.log -stop_on_error' exited with return code 2.
For mode details see 'BSIS.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
etc.....
ACCTIT.log
=========
D:\usr\sap\ED0\SYS\exe\run\R3load.exe: START OF LOG: 20080825191346
D:\usr\sap\ED0\SYS\exe\run\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
D:\usr\sap\ED0\SYS\exe\run\R3load.exe: version R7.00/V1.4
Compiled Aug 18 2008 23:55:23
D:\usr\sap\ED0\SYS\exe\run\R3load.exe -ctf E S:\ABAP\DATA\ACCTIT.STR S:\ABAP\DB\DDLMSS.TPL ACCTIT.TSK MSS -l ACCTIT.log
D:\usr\sap\ED0\SYS\exe\run\R3load.exe: job completed
D:\usr\sap\ED0\SYS\exe\run\R3load.exe: END OF LOG: 20080825191346
D:\usr\sap\ED0\SYS\exe\run\R3load.exe: START OF LOG: 20080825191347
D:\usr\sap\ED0\SYS\exe\run\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
D:\usr\sap\ED0\SYS\exe\run\R3load.exe: version R7.00/V1.4
Compiled Aug 18 2008 23:55:23
D:\usr\sap\ED0\SYS\exe\run\R3load.exe -e ACCTIT.cmd -datacodepage 4103 -l ACCTIT.log -stop_on_error
(DB) INFO: connected to DB
(EXP) WARN: check NameTab width SQL DbSlRead on DDNTT_CONV_UC failed for table T002 with rc 24.
(DB) ERROR: DbSlErrorMsg rc = 99
(EXP) WARN: check NameTab width SQL DbSlRead on DDNTT_CONV_UC failed for table CDPOS with rc 24.
(DB) ERROR: DbSlErrorMsg rc = 99
(EXP) WARN: check NameTab width SQL DbSlRead on DDNTT_CONV_UC failed for table TACOB with rc 24.
(DB) ERROR: DbSlErrorMsg rc = 99
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, skip: no data found; probably old SPUMG.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) WARN: UMGCONTAINER has 9 more problems.
(RSCP) WARN: UMGSETTINGS nametab creation: status not available, no table entry.
(RSCP) INFO: Global fallback code page = 0000
(RSCP) INFO: Common character set is 7-bit-ASCII
(RSCP) INFO: Collision resolution method is unexpected !
(RSCP) INFO: R3trans code pages = AskSPUMG
(RSCP) INFO: EXPORT TO ... code pages = AskSPUMG
(RSCP) INFO: Check for invalid language keys: active, by default
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 0
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 0
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 0
(GSI) INFO: dbname   = "ED0ecc6dev                                                                                "
(GSI) INFO: vname    = "MSSQL                           "
(GSI) INFO: hostname = "ECC6DEV                                                         "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "ECC6DEV"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "8x AMD64 Level 6 (Mod 23 Step 6)"
(BEK) ERROR: SAPSYSTEMNAME not in environment
D:\usr\sap\ED0\SYS\exe\run\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ED0\SYS\exe\run\R3load.exe: END OF LOG: 20080825191348

> We will quickly implement the UC as a separate project, not put it off forever.
VERY good decision!
> But as we have single code page, no JAVA integration, no web integration (SOA) etc... the added complexity on our already short timeframe is more than we care to take on at this point.
Happy upgrading!
Our upgrade from 4.7 to ERP 6.0 was one of the smoothest I've made.
Markus

Tp finished with return code: 208

Hi Basis Gurus,
I have received transport data and cofiles from system XYZ. I have copied data and cofiles in /usr/sap/trans/data and /usr/sap/trans/cofiles respectively.
Now I have change my directory to /usr/sap/trans/bin
I want to see the Object List before I import the transport request to my test system TST. I have added the transport request XYZK92????? to buffer with tp addtobuffer command and it is successful. Now when I am trying to see the Object list with command tp GETOBJLIST it is giving error message
This is tp version 340.16.12 (release 640)
System XYZ is not defined in TPPARAM
ERROR: System XYZ is not defined in TPPARAM
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
XYZ system is the system from where I got the transport request and it is not defined in my STMS domain. I guess we can import transport request from any other SAP system.
How to resolve this issue ? is any one aware of this.
Thanks
Best Regards,
CK

I have created the TPPARAM with the above entry. Now getting different error:
~
This is tp version 340.16.12 (release 640)
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBLIBPATH is no longer used.
Warning: Parameter DBNAME is no longer used.
Warning: Parameter DBSWPATH is no longer used.
This is R3trans version 6.13 (release 640 - 12.12.05 - 14:24:42).
1AETW065 check-sum error in datafile after "1972" bytes.
2EETW000 Please contact the SAP support.
exiting ...
R3trans finished (0016).
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
WARNS: Highest tp internal warning was: 0101
tp finished with return code: 16
meaning:
A tool used by tp broke down

DB2SET DB2WORKLOAD=SAP Fails with Return Code 238

Not sure which forum to post this, hopefully this is the right one. I am in the middle of setting up a sandbox for CRM and during the install, updating the database registry, the install fails with the following error;
db2set DB2WORKLOAD=SAP finished with return code 238.
OS AIX PPC64 I think the version is 5.3
DB2 9 FP5
I can't seem to find anything by google, but I am sure this is just a simple fix.

Hi All,
The SAP installation stopped with following error ...
DB2SET DB2WORKLOAD=SAP Fails with Return Code 227
Please help me in solving this issue .....
Regards,
Kumar Kadali

Msiexec failed with return code 1603 / installing SAP MMC Snap-In and creat

I am installing SAP ABAP trial on windows 7 and I have encountered some problems.
Please help me solve this problem.
Phase 2 : install common system files
Error happened during this step: installing SAP MMC Snap-In and creating shortcuts
Error message:
Running msiexec failed with return code 1603: Schwerwiegender Fehler bei der Installation.
Commandline was msiexec.exe /norestart /L sapmmcX86u.log /i sapmmcX86u.msi /qn
If you want the installer to retry, choose Yes. If you want the installer to abort the installation, choose No.
I have alreday given the permission/rights that are necessary for the user who is installing the system.

Hello All,
We also faced the same error, I would like to share the solution steps which we have applied.
Solution :
Refer Note 1236002 - Error during the SAP MMC MSI installation or uninstallation
As per the note :
Download utility “Microsoft Fix It” from http://support.microsoft.com/mats/Program_Install_and_Uninstall
You have the option to run this utility online or you can download the folder structure following the instructions on this page
Then copy the Fix it Portable folder to the computer with the problem and run the Launch Fix it application
What Microsoft Fix It fixes...
Removes bad registry key on 64 bit operating systems.
Windows registry keys that control the upgrade (patching) data that become corrupted.
Resolves problems that prevent new programs from being installed.
Resolves problems that prevent programs from being completely uninstalled and blocking new installations and updates.
Use this troubleshooter for an uninstall only if the program fails to uninstall using the windows add/remove programs feature.
Best Regards..

ODI Error: ODI-1217: Session jobname (2197102) fails with return code 700

Hi All,
We are getting the below error when running an interface in our ODI 11.1.6 environment.
ODI-1217: Session <interfacename> (2197102) fails with return code 7000.
Caused By: com.sunopsis.tools.core.exception.SnpsSimpleMessageException: ODI-17517: Error during task interpretation.
Task: 147
java.lang.Exception: BeanShell script error: Parse error at line 26, column 38. Encountered: >= BSF info: Insert flow into I$ table at line: 0 column: columnNo
at com.sunopsis.dwg.codeinterpretor.SnpCodeInterpretor.transform(SnpCodeInterpretor.java:485)
at com.sunopsis.dwg.dbobj.SnpSessStep.createTaskLogs(SnpSessStep.java:711)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:461)
The interface is a simple pass-through one which loads data from one table to another. We have checked in the interface for any discrepancies but could not find any issue. We ran the same interface in another environment and it ran fine there. Restarting the agent also didnt help. We could not find any lead for any solutions. Any help on the issue would be highly appreciated.
P.S: Interface name has been kept generic to <jobname>
Thanks,
Shrinivas

Please give the code generated in that step ( Insert flow into I$ table.)

Import terminated during TBATG CONVERSION OF DD-OBJECTS with return code 12

Hi,
When we are doing an import, a particular transport fails with the error message
'Import terminated during TBATG CONVERSION OF DD-OBJECTS with return code 12
We are not able to determine, why its failing. If you guys have come across this error message, can you please let me know how you resolved it?
Thanks,
Sri

Hi,
Pls attach error file with this.
Regards,
Payal Patel

Error in transport, ended with return code: 12, job RDDEXECL cancelled

Hi Friends,
When I am trying to import a request in a BW preproduction system, it is giving below error: However, the transport is imoprted successfully in Quality.
===================================
Program terminated (job: RDDEXECL, no.: 09222300)
See job log
Execution of programs after import (XPRA)
End date and time : 20080509092238
Ended with return code: ===> 12 <===
Job log:
Date Time Message
09.05.2008 09:22:23 Job started
09.05.2008 09:22:23 Step 001 started (program RDDEXECL, variant , user ID DDIC)
09.05.2008 09:22:23 All DB buffers of application server unix0001 were synchronized
09.05.2008 09:22:25 ABAP/4 processor: UNCAUGHT_EXCEPTION
09.05.2008 09:22:25 Job cancelled
=======================================
Kindly advice.
Thanks & regards,
Kunal Patel.

Hello,
I ran a search for this error and found the following notes:
SAP Note 966234 - 70SP10: DTP transport and content error
SAP Note - 1074388 SAPBINews NetWeaver 7.0 BI Support Package 16
Check if they are relevant for your system.
Regards,
Siddhesh

Importing error Ended with return code: === 8 ===

Hi Experts,
I am trying to transporting an infoobject 0EMPLOYEE from Dev to Production.While importing the request I am getting an error like
Execution of programs after import (XPRA)
Transport request   : BD1K901543
System              : BP1
tp path             : tp
Version and release: 372.04.36 700
Execution of programs after import (XPRA)
End date and time : 20090206164251
Ended with return code: ===> 8 <===
after expanding this error msg i am getting
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding
Characteristic 0CM_SHAR: Unit 0AREA_UNIT no allowed in compounding
by clicking on the error mag
Diagnosis;
If the characteristic is used in an InfoProvider with dimensions (for example, an InfoCube or MultiProvider), the compounded unit is not unique if currency key figures are used at the same time.
System Response
This type of modeling is not supported.
Procedure
Replace the currency with a different characteristic. If you nevertheless want to use a unit in the compounding, you should use the modeling of a characteristic that semantically represents a unit. To do so, copy the technical properties of the unit of measure or the currency.
How can I solve this problem?
Can add any other char to this compounding char is it works?if yes which currency char i need to add here?
Thanks & Regards,
Sridhar

Hi Sridhar,
        I am facing the problem with 0CM_CTAR and 0CM_SHAR. both the characteristics are not allowed compouding ATTRIBUTES.
0cm_ctar not allowed comp .attr of 0unit_dim
0cm_shar not allowed comp.attr 0f area_unit.
for this reason what i need to do. Please give me help on this.
sridhar could you give me solution what i need to do. i am also implement same sap note or any other solution you have.
Please kindly give me reply.
Thnaks,
Guna.
Edited by: gunasekhar raya on Apr 14, 2009 6:16 PM

Error: Test call of transport control program (tp) ended with return code 0

Hi Experts,
When we are trying to transport Request.
Error: Test call of transport control program (tp) ended with return code 0208
in STMS what are the steps to fallow to just back up the code.
Any Solutions is Greatly Appreciable...
Thanks in Advance,
Ram,

Hi,
a)If your system is UNIX check /usr/sap/trans is mounted or not?
b)After configuring TMS did you save and activate?that can be one reason.
c)tp might be corrupted.u need to upgrade your tp. (or you can upgrade to the latest kernel)
Please check the below link
could not start transport control program tp
However as suggested by NIbu, you should restart the server once before doing any other checks
Thanks
Debdeep
Edited by: Debdeep Ray on Jul 13, 2009 4:28 PM

[Error during Export] R3load exited with return code 11

Similar Messages

Maybe you are looking for