On Export, getting audio but only one still frame of video
I am trying to export a .mov file to a QT file to reduce overall size, and each time I do the export, I get all of the audio fine, but the video is just a still picture of the first frame. Does anyone have any idea what I am doing wrong? I've tried tinkering with the export settings, but nothing seems to work.
Powerbook G4 Mac OS X (10.4.9) QT Pro 7.1.6
You, like the OP whose thread this is, fail to say
what the source video info is or if it even plays
before trying to reprocess it to H264.
oh! Sorry for not informing about the source video. The source video was a QuickTime video compressed with H.264 and audio with AAC.
Interesting settings- why is the output so tiny?
160X120 is pretty small.
I was encoding this to put it as an inset video.
BTW, I could encode it with Movie to MPEG-4 settings.
20" iMac Mac OS X (10.4.7) 2 GHz Intel Core Duo, 1.5 GB DDR2 SDRAM
Similar Messages
-
My Ipod touch is 5-6 years old. Suddenly, I'm receiving audio through only one ear bud. Is this a common occurrence? And does this just mean I need to replace them?
It's fairly common for headphones after extensive use (5+ years). If you have another set of headphones (any type with same connector), try it with the iPod to determine if the fault is on the headphones or on the iPod. Or you can try the same headphones with another device, to see if they are working fine or you get the same audio problem.
-
Importing M4V - I get audio but only white screen
I've imported a very large m4v file into iMovie (33gb) which was ripped from a DVD using Handbrake.
I get the audio with no problem, but the picture is white - I get nothing at all, the timeline marker moves across as normal but the preview window is white.
I downloaded the x264 codec to try and combat the problem, but I still get the same.The file I was using was created by Handbrake (ripping a chapter from DVD).
For some reason, when I had the output quality setting (on Handbrake) at 100% the videos won't show up in Streamclip. When I reduce the quality (or leave it at the default setting, which is usually about 60%) the files are working fine.
If someone can tell me how to maintain 100% quality in Handbrake, and still have Streamclip recognize the video, that would be great.
Hope that all makes sense -
External video doesn't play but only shows still frame (some times).
When trying to view a clip or sequence on my external video monitor (NTSC via firewire through Sony converter box) and only for some of my projects, I cannot get the video to play. It displays a single frame and then updates when I stop playing a clip on the desktop. I've selected "all frames" in the External video option, but I cannot get it to play real time. This only happens with certain clips or sequences. Any ideas what's up?
I've been having this same issue. I'm pretty sure it has to do with one of my sequence settings. I have no issues when I'm playing back an SD project but when I try to playback an HD project to an SD monitor I encounter thsi problem where it stays locked on the last frame I paused at. I'm using a Blackmagic Decklink Extreme HD and attempting to playback over composite.
Thanks -
Help! Quicktime Movies playing only five still frames
When I try and play quicktime movies on my PC (Windows Vista) they play back with sound, but only five still frames from the movie play on the screen. How do i fix the problem?
I'm running windows vista and Quicktime 7.3.1. The problem shouldn't be the video card as all my other video player applications playback fine.
Thanks for your help!Hi,
I have found the solution to this problem I presented.
Sorry, I didn't realize that a computer monitor cannot support these images accurately.
http://library.creativecow.net/articles/rossshane/fcpfaq.php
I had a Canopus ADVC-110 sitting right here.
Plugged it up to the TV,
and the images appeared fine.
But this brings up one more question:
Is there a way to have all these images from Final Cut accurately displayed on a computer monitor ?
I've got a lot of more of them around than TVs . . .
Sorry to have bothered you with this, but I would appreciate further information on displaying the images on a computer monitor.
Thanks !
Howard -
How do I set up a separate icloud account? Both my wife and I have an iPhone 4s and an iPad (1 and 3), but only one Mac. We are tired of our "stuff" getting mixed up together when we sync. Thanks much
You don't need separate iCloud accounts if you want to simply sync unique content to each device using iTunes. I have three iDevices using one ID and one iTunes library and each device has it's own content on it. You need to set up the sync configuration for each device. This is what I recommend.
First turn off auto sync in iTunes. Launch iTunes on the Mac and go to iTunes>Preferences>Devices>Prevent iPods, iPhones and iPads from automatically syncing. Click OK and then quit iTunes.
Connect one of your devices to the Mac and launch iTunes.
Click on the device name on the left side under the devices heading.
Click on a tab in iTunes - Apps for instance.
Click on the Apps that you want to sync to that device.
Make sure that the Sync Apps heading is checked.
Follow the same procedure for all of the other tabs in iTunes ..... Music, Photos, Movies and so on.
After you have finished making all of your selections, click on Apply in the lower right corner of iTunes.
When you are done, eject the first device and do the same thing with the other device. iTunes will now remember the sync configuration on each device.
You can change that configuration any time that you like by following the steps outlined above.
If you want to continue to auto sync, turn it back on in the iTunes preferences as described above. -
I have my ipod backed up on multiple computers but only one computershows all my playlists. How can I get all my play lists to show up on multiple computers?
If you want to connect and use an iPod on more than one computer you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply.
Using iPod with Multiple computers
Managing content manually on iPod
If your iPod is set to update automatically take care when connecting to a different computer if your current one is out of commission. You will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. -
Hello I bought a audio book yesterday and it got charged to my bank account but I left the wifi zone and it didn't get downloaded but the charge still shows on my bank account how do I downloaded with out getting charged again ?
Store>Check for Available Downloads
-
Drag and Drop with mulitiple drag sources but only one correct answer?
I've created two drag sources (in a Type group) for one drop target. I want to be able to drag only one or the other onto the drop target. I changed the correct answers from 2 to 1, but I can still drag both onto the drop target. Is there a way to reject the second drag source?
Is there a way to select the same drag sources and have the same situation for a different drop target?
Plus, if I have the drop target set to not visible, is there a way to change it to visible once a drag source is dropped on it?
Sorry for the newbie questions. Thanks for any help.No, I made the target invisible, not the drag object.
I have sample text (a paragraph missing periods). I created an image file of the period (essentially, a dot within a square with the same color background as my slide). The reason I created the image (and not just a round filled shape) is because if I can get this to work, I'd like to use other punctuation mark images. I imported the period image and made 3 copies of it (4 separately named images). Two of the images (the drop targets) I placed where they belong in the sample paragraph and made them invisible. The other two images are visible and would be the drag sources. I want students to be able to choose either copy of the drag source and place them on either of the drop targets (no specific order, but only one being able to be dropped onto one target). With the correct answer, I'd like to make the target visible. In the drag settings, I unchecked "send back to original location" and then set it to absolute. This is so the student would be able to place the period in other areas of the sample paragraph (but not be able to "find" the active areas that would automatically pull them into place over the target. Sorry, I don't have access to the program at this minute, so I can't remember what the other setting was instead of absolute that "pulled" the drag source onto the target.) Anyway, if set to absolute, the dropped items do not line up properly (because they land where they were dropped, obviously). So, I'm looking for a way to then make the target (that was invisible) visible when one correct period is dropped onto it, plus then reject any other periods being dropped onto it.
I'm open to suggestions if there is a better way to do this. -
Is there a way to keep a particular backup permanently? I'd like to keep a backup, but only one permanently.
Thanksds store wrote:
CCC can also custom schedule and save the changes between cloned states for backup just like TimeMachine does or choose the strict mirrored clone option or even choose highly custom options in what gets saved to the clone and how.
Yes, it can, but since CCC and other cloning apps always compare everything on the Mac to everything on the backup, it takes far longer, and much more CPU, to figure out what needs to be backed-up, than Time Machine (which uses the File System Event Store, a log of changes that OSX keeps on each drive). That means it's rarely practical to run a clone more than once a day, as there's a noticeable performance impact; but TM's quick backups are barely noticeable.
As an example, the TM backups on my small system rarely take more than a minute, and I rarely notice them unless I happen to see the icon spinning. But I have my CCC clone updated early each morning (while I'm still snoozing), because it takes 10-15 minutes and slows performance considerably.
So it has the best of both uses now, and the clone is bootable like using the original drive, which TimeMachine lacks as it's only a backup system.
Absolutely. I always recommend Time Machine plus a clone (minimum).
Also clones can be directly accessed, like any other normal drive, by any computer of any operating system that can read the HFS+ format of the Mac, unlike TimeMachine which only works with a Mac. This is beneficial as one can choose to use a Win or Linux PC with their Mac files in times of crisses, to transfer them etc.
That's a two-edged sword, as they say. Time Machine backups are somewhat more secure because only Macs can read them. But again, if you have both TM and a frequently-updated clone, you have the advantages of each.
Don't make me write a TimeMachine vs clones smackdown
See Time Machine vs. Clones and Archives -
After updating my system to Mountain Lion 10.8.2 I can no longer view videos on Facebook or other sites. The only one I can view videos on is youtube. I have downloaded Adobe Flash player and still no luck. I cannot even open Preview on my computer anymore. Any ideas would be helpful thanks
Merely clicking the Preview icon in the Dock doesn't cause it to open anything, unless you had one or more windows open the last time it quit.
If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test.
1. If you're getting a "blocked plug-in" error, triple-click the line below to select it:
/Library/Internet Plug-Ins Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu. A folder should open. If there is more than one item in the folder with the words "Flash Player" (not "flashplayer") in the name, open the respective Info windows, check the version numbers, and delete all except the latest. You may be prompted for your login password. If you get the same error after doing that, re-download and reinstall Flash. Download it from this page:
Adobe - Install Adobe Flash Player
Never download a Flash update from anywhere else.
2. If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked Enable plug-ins.
3. Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.
4. In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane. -
having difficulty - via airplay --w/ streaming sites from ipad2 to g2 apple tv -- get audio but not video -- what gives???
What site are you trying to watch? I just tested 3. The you tube app streams from the pad to apple tv fine, as long as the source video format is ok. Checked a site called funny or die.com. Most of the videosmthere stream to apple tv fine. A few have a different format, and do audio only. Netflix does not stream at all, but you can get to netflix directly from apple tv. Whether or not it streams is directly related to the format of the video. Some do, some dont.
-
I have just bought this expensive phone. I tried connecting to Bluetooth car kit. It gets connected but only incoming voice can be heard. No voice goes out from Iphone.
I also tried connecting to Samsung Bluetooth but the problem is same. There is only in coming communication and no out going.. But both the Blue tooth devices works fine with my Samsung SII.
A working solution help will be very juch appreciated. Thanks in advance.I'm having the same problem. I had a plantronics 975 (which I lost, sadly). When connected, the ringer would always be routed through the bluetooth and the iPhone's external speaker. When in silent mode, the iPhone would only vibrate, but I could still hear the ringer in the bluetooth.
I just bought a new Plantronics Voyager+. Now when it's connected, all sounds are routed to the earpiece - including the taps, etc. The iPhone's speaker doesn't ring at all, unless the bluetooth is disconnected or powered off. I'd really like to be able to hear both, like I was before. This is an iPhone 3G running iOS 4 (latest version, not sure what it is exactly). Haven't updated software/firmware in between bluetooths, just changed the earpiece. -
I need to edit out parts of a song to cut it down to two minutes for my daughter's talent show. I went to info/start time and it will cut down one part but only one part. I need to put three parts together. I tried adding duplicates of the song to the list but if If I change the start time on one it will change it on all of them.
In your library, right-click the song you want to edit.
select "get info".
go to "options" and select the start and stop times for your first section of the song.
click "OK".
Find the shortened version of the song in your library. It may take a minute for it to show up. right click it again and select "create (????) version". (the ???? is different for different formats).
The library will spit out a new, second version of the song which you can rename. I suggest you use the original title and add a 1 to the end.
Now you can go back to the other version and repeat the process with a different start/stop time.
Once you are done editing, you can burn all of your versions to a disk, just make sure your interval time is zero so there are no gaps between edits.
To keep the orginal song on your library, just go back to the original and put the start/stop times back to the original settings. -
Hi, i have purchased iPhone 5 about 15 days ago, its working well but only one problem that it has is that some time its losting signal and appear as no serves. would you please help me in this reqard. thanks
Well, it could be that your carrier doesn't have a signal when it looses its signal. You could try resetting network settings which might help - Settings/General/Reset/Reset Network Settings. You'll need to set up any wi-fi networks you connect too again. If you're still having issues, contact your carrier.
Good luck!
Maybe you are looking for
-
Depot Sales -J1IJ while choosing excise invoice going to dump
Hi Gurus, In Depot Sales: while doing excise invoive from T-code J1iJ Go to delivery -RG23D selection select the delivery number XXXXX Excise Group 51 and series Group: 50 ENTER - select the line item and click on F6 and here we have to click on
-
For someone reason my iPhone demanded I update my billing information when I tried to update my apps. It required the security code for my card. I entered it, correctly at least 20 times until I because frustrated and tried it on my iMac. I updated i
-
I deleted some video's from iPhoto then from the trash can on iPhoto and then from the trash can on my desktop but the space has not freed up on my hard drive
-
Query Selection Screen restriction
Hello All, In my query selection screen, i have date, month and week as selection parameters. Now my requirement is that user should select only one of them. If he selects more than one ie combination of two or all three, than query should not show a
-
Data loading in implementation
Hi gurus, In implementation-(kindly read the whole thing to understand my doubt) 1.Is client 300 is the only client in BW Development server r else do we have 200,220 as we have in R/3 Developmentserver along with 300. 2. Do we activate all the Infop