On Hand qty.while raising the PR

Hi All,
While raising the new PR(Purchase Requisition) for particular item, I have entered the item in the line. Now can I see the on hand qty. for that item without using Item Inquiry. Or is there any personalization can be done to see the stock?
Thanks in advance.
Prasad Joshi

Hi Sundar,
your question is not fully clear to me. Do you want to update the quantity if a Job in WIP or a Lot in Inventory?
For Lots in Inventory you can use the usual Inventory Transactions (e.g. Inventory > Transactions > Miscellaneous Transactions).
For WIP Jobs you can for example use "Update Quantity" transaction in SFM: Shop Floor Management > Lot Transactions > WIP Lot Transactions
But we use this only to increase the Job quantity. For reducing job quantities in case of scrap, you can use the scrap transaction (Move Transaction).
It all depends on your setup and if you use costing functionality etc.
Kind regards,
David.

Similar Messages

Goods Movement Qty While Confirming the Order

Hi Friends,
While confirming the order The end user Will go to the goods movement screen and enter the actual consumed Qty (When all BOM components Are marked with automatic Back flush) For the components with 261 movement type and will enter the storage location and batch no if required .
Now my requirement is the user should not have the access (it should be in gray) to the BOM Components qty to change
OR
He should not be able to change beyond the qty As per scrape % Given in Material Master or BOM.
The Reason for this is
Even When there is a shortage for BOM components in SL location, he is reducing/Adjusting the required quantities as per the existing Qty ( If there is no stock then making it to ZERO also) and confirming the order.
Pl suggest me is there any user Exit for this or can I do it thru Standard SPRO settings.
hari

Hi,
You can make screen variant SHD0 for CO11N and hide it.
In t code SHD0, give the transaction variant name ( say ZCO11N )of ur std CO11n.
CO11N screen will appear, when u will save the variant, u will getgood movement tab , it will hide now.
Activate the transaction variant.
Regards,
R.Brahmankar

Error 513 while raising the message from satellite system

Hello All,
When I try to send message(Service desk) from satellite system, i get following message
"Because of error 513, no message was creat
Support Desk System"
I gusses there is some problem with authorisation.
please guide how can I fix this issue.
Regards,
Shyam.

Hi Gurus,
I have assigned customized action profile to SLFN transaction.
When I try to send message(Service desk) from satellite system, I get following message
"Because of error 513, no message was created
Support Desk System"
But when we check in crm_dno_monitor , the message is created at the backend,but without assigning external number range.
Whenever I am making any modification in action profile, it is creating the first messgae after restart
of SAP Solman System, but for next message, Error 513 message is raised and message is created at backend without assigning external number to it
I think there is some problem in number range or buffer in number range
Can some one help me in this
regards
Swati

Error while raising the shopping cart.

Hi experts,
Can any one tell me, I get an error message at the time of raising a SC,
The error is
Partner 22452 not found with with partner function type goods recipent.
Account 54102022 requires an assignment to an CO object
No address found for partner type goods recipient.
I have checked users consistency he is fine, I checked all the attributes they were fine.
So where could be problem? can any one suggest?
Best Regards,
Sairam

Hi Sai,
The issue below is a perfect example of the BP being insconsistent or his Company BP being inconsistent. what version of SRM?? If you are on SRM 4.0, you can use the repairl of level 2 feature and fix this issue.
Partner 22452 not found with with partner function type goods recipent.
The BP you logged in with should have an employee role in BP. This is different from the regular role in PFCG. I am poiting at the Role in BP from transaction BP.
Account 54102022 requires an assignment to an CO object
This is a data error. You need to populate valid account assignment in the account assignment tab.
No address found for partner type goods recipient.
Same as the first error. Your BP is corrupted.
Hope this helps !
Pls assign points for usefull answers !
Sundeep

How to automate the generation of SCB Indicator while raising Invoices?

Hi Team,
According to our client requirements we are using different SCB Indicators(for Foreign vendors) in order to segregate the payments for diff. services. Can we automate this SCB Indicator while raising the invoices ? Else is there any other way to achieve this requirement.
We are using different sources to raise the invoices automatically like self billing process, other middleware i.e. from Non-SAP system etc.,
If we are raising invoices manually via MIRO / FB60 then we are giving the suitable SCB indicator according to the relevant service. Can we automate the generation of SCB Indicator while raising the invoices automatically ?
Please provide your valuable suggestions!
Thanks & Regards,
Lakshmi S

Hi Vinod,
Thanks alot for your help in this regard
Requesting you to please clarify here which BADI is the relevant one.PFB the screenshot for your easy reference.Because we found nearly 4 BADIs related to this scenario.Please through some light here once.
Thanks in Advance!
Regards,
Lakshmi S

Raising the functional level on a large forest/domain with a DC offline?

Hello All
I've done what research that I can and haven't been able to find a definitive answer outside of people purposely taking a DC offline while raising the functional level of a forest in case they need to do an authorative restore, but I have a bit of a different
situation and I just need to confirm something.
I have to perform the task on a very large AD infrastructure that includes 90+ domain controllers globally and I've run into a scheduling conflict that is out of my control. One of the locations overseas will be going through some maintenance during
my time window when I will be raising the functional level of the forest and domain.
The question is, what happens to the DC that is offline during this period? Once it is restarted, do the changes replicate to that DC, or do I need to perform the task in place for that DC? If anyone has any links or instructions on how to bring a DC online
after the functional level of both the forest and domain have been raised, please let me know.

The DC can be offline and it won't be an issue. when it comes back online the changes should replicate to it. Just don't keep it offline longer than the tombstonelifetime.
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security, BS CSci
2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup.
This posting is provided AS IS with no warranties, and confers no rights.

Re: While doing the MIGO

Hi All,
i have arise the purchase order for 20 qty and also done GR for 10 dated on 10.04.2010.
right now i am doing the GR for remaining qty while doing the GR system taking the full value fot the qty instead of taking the partioal qty.
The Base value also taking full value.
For the above requirement need any customizing change or give me the valid input on this.
Please give me the valid input on this very very urget.
Thanks & Regards
Siva

Hi Siva,
I am not sure if [note 105169 |https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=105169]and [note 45510|https://websmp203.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=45510] provide some hints regarding your issue, but can you please read them?
Thanks and regards,
Polly

Error while raising a invoice using VF01

Hi,
I am getting an error while raising a invoice using VF01.
Error as follows
RV_MESSAGE_UPDATE
Update was terminated
System ID....   TIP
Client.......   300
User.....   user1
Transaction..   VF01
Update key...   E66E6454075548D8922BAC091E81F0CB
Generated....   18.07.2007, 18:57:38
Completed....   18.07.2007, 18:57:38
Error info...   TD 443: WRITE_FORM
Pls help
Points will be rewarded.
Thanks

Hi,
This is an ABAP short dump. If you go through the error log, there will be a section where in you can see > What caused the problem.
Try to analyze this log and you can find a solution. Probably, you can also check whether there is any OSS note with this error message.
Thanks
Murali.

Error while running the Report

Hi ,
I am trying to run the Report in Bex Analyzer. and once I enter the value for the variable, it gives me message that "Element is not correctly define (please check query)" and when i click on the error it gives me detail message as below :
Diagnosis
Additional elements that do not have the same dimension, such as quantities and amounts or amounts and ratios, are added to element Sales Qty Gallons .
Procedure
Check your definition.
If you still want to use this addition, you can suppress the dimensionality of one or both subexpressions by using the 'NODIM' operator. The system then interprets this or these subexpressions as nondimensional numbers.
In the executed query, you can use the Key Figure Definition function to analyze element Sales Qty Gallons .
Now the thing is I am already using "NODIM" operator to add those elements. and I m not sure why this error is coming up now because I have created this query a while ago and it wasnt giving me any error at that time but now I have make some changes into it and it;s giving me this error while running the Report. But the thing is I didnt change anything in the element for which it;s showing me error.
Thanks,
Naitik

Naitik,
There are two or more key figures in your report. They are defined by different dimensions and somewhere you have a formula with both these key figure.
Edit your query and select the Check Query icon. It will tell you which calculation you have the problem with. Edit this calculation to see which key figures are present.
If the formula is logically correct, best thing to do is to put a NODIM( ) on your key figures that make up the formula, and then change you formula to look at the NODIM( ) version.
That will fix things for you,
Regards
Gill

Error while opening the receipt entry form in AR module.

Error while opening the receipt entry form in AR module. We have created one new responsibility of Receivables for new operating unit . When we open the corresponding
forms , we are getting the error message as :
NO_DATA_FOUND
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-20002.
Kindly help in resolving.
We have ERP version of 11.5.10.2

Please also see the following docs.
Transactions Workbench Error: Listing of ORA Errors [ID 1336495.1]
FRM-40735 ERROR OPENING LIFE EVENT REASONS FORM BENLEVRS [ID 1517593.1]
APP-AR-96996: The Defined Sales Representatives Have Incorrect Id'S [ID 437107.1]
ARXSUDRC Receipt Classes Errors With APP-AR-96994: Please Define Sales Representatives [ID 357454.1]
Thanks,
Hussein

Error while invoking the WSDL service of EBS from BPEL process

Hi Team,
when we are calling webservice client to call WSDL service which is published in Oracle EBS integrated SOA Gateway from BPEL process.
After invoking, we are getting the below error
<bpelFault><faultType>0</faultType><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>FND_SOA_SERVICE_EXECUTION_ERR:oracle.apps.fnd.soa.util.SOAException: ServiceExecutionError: Error while executing the service Exception returned from JCA Service Runtime. Exception returned from JCA Service Runtime. null :Please see service monitor logs for full error trace</summary></part><part name="detail"><detail>oracle.j2ee.ws.client.jaxws.JRFSOAPFaultException: Client received SOAP Fault from server : FND_SOA_SERVICE_EXECUTION_ERR:oracle.apps.fnd.soa.util.SOAException: ServiceExecutionError: Error while executing the service Exception returned from JCA Service Runtime. Exception returned from JCA Service Runtime. null :Please see service monitor logs for full error trace</detail></part><part name="code"><code>{http://schemas.xmlsoap.org/soap/envelope/}Server</code></part></remoteFault></bpelFault>
API Name : OE_ORDER_PUB.PROCESS_ORDER
could you please let me know the exact problem and provide the solution.
Thanks
Phani Ch.

Hi Phani,
Are you able to reproduce issue as below:
1. Login to Application as sysadmin.
2. Navigate to Intergrated SOA Gateway > Integration Repository.
3. Click on search on right hand side of the page.
4. In the Internal Name type "FND_USER_PKG" and click Go.
5. Click on the User link.
6. Under the "Web Service - SOA Provider", click in the "View WSDL". Copy the complete URL "http://test:8003/webservices/SOAProvider/plsql/fnd_user_pkg/?wsdl"
7. Open the soapUI.
8. Click File > new soapUI Project.
9. Test the web service.
If yes,
I think you might be need to execute a patch:
solution:
To implement the solution, please execute the following steps:
1. Download and review the readme and pre-requisites for iAS Patch 18855074.
Note: Above Merge Label Request (MLR) is build for EBS 12.1.3 having OC4J 10.1.3.5.
2. Enable the profile option "EBS Adapter for BPEL, Function Security Enabled".
a. Login as SYSADMIN user and Navigate to System >Profile and Search for "EBS Adapter for BPEL, Function Security Enabled" (Internal name :EBS_ADAPTER_FUNCTION_SEC_ENABLED)
b. Set the Value to 'Y' at SITE level . This means function security feature is enabled and all API calls for PL/SQL APIs, Oracle e-Commerce Gateway, and concurrent programs will be checked for user security before they are invoked.
3. Retest the issue by Generating and Deploying the required package.
4. Migrate the solution as appropriate to other environments.
Thanks
Ranjan

Error while transporting the transfermactions

hi,
i am transporting transformations dev to qty. while transporting i am getting error msg:
1) No Rules exists.
Transformation : Rules 1 could not be imported.
Transformation : Rules 2 could not be imported.
Transformation : Rules 3 could not be imported.
No fields were supplied.

Hi Shilpa Reddy
Just a quick spot it may be because of incorrect transport collection or multi modifications of transformation under a single transport .
Just replicate the data source in Target system RSA1>Source System>DS right click replicate .
and create a new transport in development system by reactivating the transformations and then release it in SE01 and then go to the Target system and go for STMS import it.
Small Note have you mapped all the info objects ,have imported the specified info objects into your target system if not then please do it and then import the transformation request.
Hope its clear a little..!
Thanks
(P159793)K M R
**Assigning points is the only way of saying thanks in SDN***
>
shilpa Reddy wrote:
> hi,
>
>
> i am transporting transformations dev to qty. while transporting i am getting error msg:
>
> 1) No Rules exists.
> Transformation : Rules 1 could not be imported.
> Transformation : Rules 2 could not be imported.
> Transformation : Rules 3 could not be imported.
>
>
> No fields were supplied.
Edited by: P159793 on Dec 30, 2008 4:55 PM

Error while raising modify request for AD resource

Hi,
Getting below error in log, while raising modify request for AD resource, UI shows error while retrieving resource entity details.
<Oct 19, 2011 2:15:45 AM CDT> <Error> <oracle.iam.requesttemplate.agentry.operations> <BEA-000000> <The "itresource-type" property is missing for attribute reference AD Remote Manager ITResource, which is of type itresource-lookup.>
I verified the datasets for AD Remote Manager ITResource, comparing with our other environments. It is proper and we are not using AD Remote Manager ITResource anywhere.
<AttributeReference name="AD Remote Manager ITResource" attr-ref="AD Remote Manager ITResource" type="Long" length="10" widget="itresource-lookup" required="false" available-in-bulk="true"/>
Please let me know how to resolve this issue.
Thanks in Advance.
Edited by: 856226 on Oct 19, 2011 4:55 AM

Hi,
I think you should post this in an other forum, somewher in the Fusion stack, maybe Identy Management. This forums is ment for the Oracle database. So please post in a forum underneath https://forums.oracle.com/forums/category.jspa?categoryID=13&start=0
Herald ten Dam
http://htendam.wordpress.com

Error while raising Production Order

Experts
I get an error for a particular Item while raising a PRODUCTION ORDER
'Location Input does not match the warehouse location of Item'
I work in SAP B1 2007B - PL 18
It will be great if someone can give me the reason/solution for the above ERROR.
REGARDS
KARTHIK

Hi,
Parent item and child items warehouses location should be same.......
Regards
Deepak Tyagi

Error while raising leave request

Dear all,
I am getting error while raising Leave request over ESS...Task WS12300111 locked for instantiation.
As well as in MSS manager is not getting requests for approval..can anyone tell me on workflow front what shall be done.
Regards,
Rajasekar.

check the WF is a general task ie PFTC and user has authoriation, Are you using any custom code through badi, then enusre Start_WF method is implemented.

On Hand qty.while raising the PR

Similar Messages

Maybe you are looking for