On Rows are got Selected on Row Select

Hi Guys,
I am facing a Strange Problem that when i select a row in table all rows got selected.I do't know whats i have done wrong.Also made a new table but facing same Problem.
<af:table value="#{bindings.xxmsn_sw_po_vwVO_blankets1.collectionModel}"
var="row" summary="Table of Blankets"
rows="#{bindings.xxmsn_sw_po_vwVO_blankets1.rangeSize}"
emptyText="#{bindings.xxmsn_sw_po_vwVO_blankets1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.xxmsn_sw_po_vwVO_blankets1.rangeSize}"
rowBandingInterval="0"
selectionListener="#{bindings.xxmsn_sw_po_vwVO_blankets1.collectionModel.makeCurrent}"
rowSelection="single" id="t1"
styleClass="AFStretchWidth" columnSelection="multiple">
Thanks

Hi,
do they in fact get selected or do they just show selected? To me it sounds as if what you see is kind of a ctrl+A effect. Have you tried different browsers? And which JDeveloper version are we talking about ?
Frank

Similar Messages

After SALV Refresh, rows are still selected in display

I have an SALV output (simple list) that updates a database table based upon user action. During the user_command processing, I modify the internal table for the SALV, removing the rows that have been updated by the user, and clearing my index row table created from the get selects methods (this appears to prevent this problem in older ALV versions). Then, I do a alv->refresh( ).
Upon re-entry to the SALV display, all the data is correct, but the rows that were previously selected by the user are highlighted. For example, if the user updated row 1, I do the processing and return to the SALV display after refresh. Row 1 (formerly row 2) is now highlighted.
If the user updated rows 1 and 3, upon return to the screen 1 and 3 are still selected (were 2 and 4 before the update).   . If the user updated the last row, the SALV display has no rows highlighted and cursor is on row 1, column 1, which would seem to be the correct behavior after the refresh.
SALV_DEMO* programs don't appear to handle this, and I don't find any method that will let me reset that prior user selection.
Any suggestions to correct the "memory" feature of the SALV display?

Hi ,
Try to free your container before clearing your alv grid.
try the below code.
CALL METHOD containername->free
        EXCEPTIONS
          cntl_error        = 1
          cntl_system_error = 2
          OTHERS            = 3.
      IF sy-subrc <> 0.
      ENDIF.
      CLEAR containername.
      CALL METHOD grid name->free
        EXCEPTIONS
          cntl_error        = 1
          cntl_system_error = 2
          OTHERS            = 3.
      IF sy-subrc <> 0.
      ENDIF.
      CLEAR grid name.
Regards,
Chitra

If I add artwork by dragging a jpg to the artwork area after selecting several rows, in some instances a single icon is created in the flipper; in others one is created for each song. Why? How can I get one image per album every time?

If I add artwork by dragging a jpg to the artwork area after selecting several rows, in some instances a single icon is created in the flipper; in others one is created for each song. Why? How can I get one image per album every time?

If I add artwork by dragging a jpg to the artwork area after selecting several rows, in some instances a single icon is created in the flipper; in others one is created for each song. Why? How can I get one image per album every time?

I need to know how many objects i got selected

Hi all,
I need to know how many objects i got selected for a particular issue and ussualy are too many to count one by one. I know that this information is provided in other software like Corel or Freehand, but I didn't find out how to get this info in Illustrator.
Any idea?
Thanks

Open the Document Info palette.
From its flyout menu, turn on Selection Only and Objects.
The palette will not remember those settings. You have to re-select them every time you relaunch Illustrator.
The Document Info palette is a half-baked hack, tagged-on to display a subset of the information in the normally-hidden programmer's window, instead of incorporating the data properly into the program's interface. So it's another completely unintuitive grab-bag of important information that everyone needs, but no one would expect to look for there.
JET

Office 365 ProPlus App-V 5.0 Package installs Lync, Outlook, Infopath and Onenote even though they are not selected for publishing

I have created an App-V 5.0 Package for Office 365 ProPlus using the documentation provided here:
http://technet.microsoft.com/en-us/library/jj219422.aspx
I am able to load the App-V Package into my SCCM 2012 SP1 environment and deploy the package to a test machine
Within SCCM, I have configured the deployment type to only select a couple of applications. Notice that Lync, Outlook, Infopath and Onenote are not selected.
http://i.imgur.com/1eMxUlY.jpg
For my deployment type, I only selected Word, Excel and Powerpoint. Looking at my test machine, those 3 applications now show up in my start screen.
http://i.imgur.com/amZmxAT.jpg
I don't see any of the other Office applications be default on my start screen, so I would think all looks good. If I type another Office application, lets say access at the start screen I get, "No apps match your search."
http://i.imgur.com/fxbWEvb.jpg
But if I type Lync, Outlook, Infopath or Onenote, it shows me that those applications are available, and I can launch them as an App-V application just as I could Excel, Word or Powerpoint, the applications that I wanted to have available.
This is not what I was expecting when I went through the trouble to create an App-V package. It looks like almost all of the apps become available on my client machine, all App-V is doing is making the application button in the start screen a little
harder to find.
What is interesting is that for the applications I did want published, I can search for them by just entering a few letters of the application name, and they show up with the 2013 version label, see below for an example search for Word.
http://i.imgur.com/0LeS05z.jpg
For the applications that I did not publish but still show up on my client, I have to type in the full name of the application for the launch button to come up. For example, I can't type lyn and expect to see Lync, but if i type lync I will get an
option to launch the application. The same goes for Outlook, Infopath and Onenote, and when you do type in the full namke of the app, it doesn't show the version number like Word does as Word 2013, it just shows Lync, or Outlook, or Infopath, or
Onenote.
http://i.imgur.com/QV1afuc.jpg
vs
http://i.imgur.com/PxgSmUc.jpg
Can anyone from Microsoft confirm that this is expected behavior. If this is to be expected this is pretty disappointing, because a main point of the App-V package is it is the only way to limit which applications are deployed via Office 365 ProPlus
but from what I can tell, it really isn't limiting anything beyond the start screen for most cases.

So it looks like the config xml files are the best option
http://blogs.technet.com/b/office_resource_kit/archive/2013/12/02/announcing-app-v-5-0-sp2-support-for-office-2013-volume-licensing-editions.aspx
You can now use the Deployment Configuration file to configure the Office installation. One question I often get is, “How do I disable msaccess.exe or infopath.exe from an Office install if I am not using the MSI package?” This can be done by modifying the
Deployment Configuration file in App-V with entries like the following:
<Application Id="[(AppVPackageRoot}]\office15\MSACCESS.EXE" Enabled="false">
<VisualElements>
<Name>Access 2013</Name>
<Icon />
<Description />
</VisualElements>
</Application>
That will prevent App-V from publishing msaccess.exe on the system and/or you can remove any undesired application shortcuts from publishing on the targeted computer using the shortcuts properties by deleting or commenting them out. Once you’ve configured your
Deployment and User Configuration files, you’ll have everything you need to import the packages into your App-V environment to start testing.

My Apple Loops are not selectable. Can anyone help me with this please?

Whenever I open up my Apple Loops on Logic Pro X, they are not selectable.
I have tried reinstalling the program and reinstalling the loops, but that did not work.
Any help would be much appreciated. Thanks!

What do you mean.. nothing happened?
Make sure you followed the instructions exactly.....
From the Apple () menu, choose System Preferences.
Click Spotlight.
Click the Privacy tab.
Drag a folder or an entire volume (your hard drive) to the list.
If prompted for confirmation, click OK.
Remove the item or volume you just added to the list by clicking it and then clicking the minus ("-") button.
Close Spotlight preferences.
Spotlight will re-index the contents of the folder or volume.

CS6 on Mac: Layers in certain folders are not selectable

The problem occurs when trying to select a layer on my canvas that is not in the folder I am currently working in.
So let's say I have 2 folders named folder 1 and folder 2. When I'm working on some objects in my document that are in folder 1, it all works. Yet when I try to click and select an object on my canvas that is located in folder 2 I won't be able to select it. As if it would be locked. When I go to my layers pannel, and click on 'folder 2', It normally selects all the layers in that folder and I can select everything in there. (Until I click on something that is in 'folder 1, in which case I won't be able to select any object on my canvas again.)
It almost seems like a preference, but I haven't been able to find anything that warrants this as an (annoying) feature.
Any help would be much appreciated.
On MacBook pro: OSX 10.8.3
Fireworks CS6: 12.01.1.274

The problem is not when it's in a different layer, but when I put layers in different folders. They are not selectable at that time anymore if I'm editing an object that is in a different layers folder.
I haven't had this problem before, but now it won't go away no matter how many times I reboot. (Also tried closing all other programs like spotify, but no luck still.)

How do I get the playhead to move to the beginning of the cycle area when selected instead of bar 1 after hitting enter?

How do I get the playhead to move to the beginning of the cycle area when selected instead of bar 1 after hitting enter?

Grateful pirate wrote:
Thanks but I think it's more of a setting thing.
Worked for years in 9 and know my the key commands. Just takes up lot of extra time. I know there must be a solution just can't find it myself.
Thanks again.
Oh, I see…….when I want something like this to happen I would just engage the >Go To Start< command (0 on the numeric keyboard in my case) and the play head will position at the beginning of a cycle area (if one is active of course)!
Hope this helps a bit……..

How an INDEX of a Table got selected when a SELECT query hits the Database

Hi All,
How an Index got selected when a SELECT query hits the Database Table.
My SELECT query is as ahown below.
    SELECT ebeln ebelp matnr FROM ekpo
                   APPENDING TABLE i_ebeln
                   FOR ALL ENTRIES IN i_mara_01
                   WHERE werks = p_werks      AND
                         matnr = i_mara_01-matnr AND
                         bstyp EQ 'F'         AND
                         loekz IN (' ' , 'S') AND
                         elikz = ' '          AND
                         ebeln IN s_ebeln     AND
                         pstyp IN ('0' , '3') AND
                         knttp = ' '          AND
                         ko_prctr IN r_prctr AND
                         retpo = ''.
The fields in the INDEX of the Table EKPO should be in the same sequence as in the WHERE clasuse?
Regards,
Viji

Hi,
You minimize the size of the result set by using the WHERE and HAVING clauses. To increase the efficiency of these clauses, you should formulate them to fit with the database table indexes.
Database Indexes
Indexes speed up data selection from the database. They consist of selected fields of a table, of which a copy is then made in sorted order. If you specify the index fields correctly in a condition in the WHERE or HAVING clause, the system only searches part of the index (index range scan).
The primary index is always created automatically in the R/3 System. It consists of the primary key fields of the database table. This means that for each combination of fields in the index, there is a maximum of one line in the table. This kind of index is also known as UNIQUE. If you cannot use the primary index to determine the result set because, for example, none of the primary index fields occur in the WHERE or HAVING clause, the system searches through the entire table (full table scan). For this case, you can create secondary indexes, which can restrict the number of table entries searched to form the result set.
reference : help.sap.com
thanx.

TS1389 I am trying to authorise a new computer. The Apple instructions are to select Authorise this computer from the itunes store menu. I can't find this in any menu. Can you please help? How do I authorise my computer?

I am trying to authorise a new computer. Apple's instructions are to select "Authorise this computer" from the itunes store menu. I can't find this in any menu. Can you please help? How do I authorise my computer?

Authorization and Deauthorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
More On De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

Error in Dropping columns from Subject Area to selected Columns section

While Dropping columns from Subject Area to selected Columns section in Analytics nothing is happening.There is no error in the RPD.I am using OBIEE 11g and windows7.I am also getting page error like below:
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)
Timestamp: Tue, 4 Sep 2012 08:31:07 UTC
Message: 'kmsgPickerUIJSCantAddColumns' is undefined
Line: 1
Char: 1781
Code: 0
URI: http://localhost:7001/analytics/res/b_mozilla/picker.js
Message: 'kmsgPickerUIJSCantAddColumns' is undefined
Line: 1
Char: 1781
Code: 0
URI: http://localhost:7001/analytics/res/b_mozilla/picker.js
Can you guys please help?

That error usually means it is still mapped, maybe it is used in another interface if you say the mapping has definitely been removed.
You can expand the datastore > Used In > "As a Target" or "As a Source" or "In a Package" - that should tell you if it being used anywhere else.
Cheers
John
http://john-goodwin.blogspot.com/

Stamp tool not generating the same colour as the sample area I select.

Heya, I am having an issue with the stamp tool not generating the same colour as the sample area I select. I have tried reducing the flow rate but my understanding was it should be an exact copy of the ample area. I have only had this issue for the last two versions of photoshop.
Cheers, Andy

function(){return A.apply(null,[this].concat($A(arguments)))}
UltimateTop Trumps wrote:
I create a shape and then put a shape inside, right click and choose Make Selection and the inner shape disappears leaving the larger outer shape.
function(){return A.apply(null,[this].concat($A(arguments)))}
UltimateTop Trumps wrote:
Another weird thing is that when I use a filter it applys it outside of the selection, but this is not as annoying as the original issue.
This occurs when you use the quick mask to create a selection. Did you?
miss_marple

Since installing ios6, my contacts groups are not selectable and reminders is not accurate on the i phone

Since installing ios 6, mygroups in contacts groups are not selectable and reminders is not accurate on the i phone: no problems with the ipad.
On reminders, it says 28 but I only have 7. i cloud is accurate.
Anyone having these problems with ios6 on iphone 4? (Verizon)
suggestions?

In case you are using "Clear history when Firefox closes":
*do not clear the Browsing History
*Firefox > Preferences > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/remove-browsing-search-and-download-history
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.
You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Multiple_profile_files_created
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them if possible).

Sales doc items with the status CLSD ARE being selected for month-end

We are working to improve month-end processing time for Sales Orders We use SAPKKA12 to set CLSD status on line items
SAP Help states: be sure that the status CLSD (closed) is set for all sales document items that you do not want to include in the period-end closing process. The sales document items with the status CLSD are then not selected for processing in the period-end closing process. Use report program SAPKKA12 to set the status.
This use to work (in 4.0). I have been on other projects and just brought back to this after several years (now in 5.0). Testing today shows that orders with CLSD status are being selected for month-end process.
Any ideas why this is so? System is selceting over 300,000 orders when well over half of them are set to CLSD. I do get a message that the order is not relevant to processing, but selecting the order and logging the message take time. and the logs are VERY long.
thanks

Does any one else have this issue that Sales documents with status CLSD are selected by RA (KKAK)?
In just one of our jobs, i get this Basic List
Perform actual results analysis      31273
Not relevant                                                 103894
Error                                                        2306
Objects Selected                                    137,473
75% of the orders are CLSD. and the system is still counting them. (we do not out put information messages)
I do understand that the orders are not analyzed, but all documentaion states that CLSD status is not selected, and in our 5.0 system, they are selected. In our 4.0 system, they were not selected.
Does this truely work for anyone in a 5.0 system?
Thanks
Althea

I have songs which are not selected in my library, but are still on my Iphone. How can they be deleted? Can they be deleted manually?

I have songs which are not selected in my library, but are still on my Iphone. How can they be deleted? Can they be deleted manually?

Ariana...
so I assume there should be some track of them
Yes.
In the iTunes Store on the right under Quick Links click Purchased (new).
You'll be able to re download past purchases for free if you are a resident of the U.S., and have iTunes 10.3 or later installed.
Downloading past purchases from the App Store, iBookstore, and iTunes Store

On Rows are got Selected on Row Select

Similar Messages

Maybe you are looking for