On starting WebLogic getting Error : Listening for transport Error

Hi,
when i execute startWebLogic.cmd
i am getting error message :
oConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\
Thanks.

Hi,
Check what you put in the setDomainEnv.cmd.
Secondly try to clear tmp and cache folder of your adminserver once before next start.
Regards,
Kal

Similar Messages

On starting WebLogic getting Error : Listening for transport dt_socket at address: 8453 Exception in thread "main" java.lang.NoClassDefFoundError: vXmx512m

Hi,
system i am using for Oracle SOA is :
Windows 64 Bit
i5 Processor
6 GB RAM
29 GB on C Drive is already free after installation of all SOA related products.
I have installed wlserver_10.3 for SOA 11g Development purpose and followed exact installation sequence and procedure as mention in oracle documentation
i created domain also and every thing look correct but after installation procedure there are "Additional actions required just after every thing installed" :
setting memory limit
starting weblogic server (Admin Server)
starting weblogic managed server
and so on
now Problem is when i execute C:\Oracle\Middleware\user_projects\domains\soa_div_domain\bin startWebLogic.cmd
as mention in oracle documentation i am getting following error message : (i have only included last error lines instead of complete console log)
oConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\
sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_oepe180\profiles\default\syse
xt_manifest_classpath;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sysext_ma
nifest_classpath;C:\Oracle\MIDDLE~1\patch_adfr1111\profiles\default\sysext_manif
est_classpath weblogic.Server
Listening for transport dt_socket at address: 8453
Exception in thread "main" java.lang.NoClassDefFoundError: vXmx512m
Caused by: java.lang.ClassNotFoundException: vXmx512m
        at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
        at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
Could not find the main class: ++Xmx512m. Program will exit.
Now to resolve this what i already tried are :
I change JAVA_HOME and PATH to jdk6 which came with web logic installer
Location is at :
JAVA_HOME : C:\Oracle\Middleware\jdk160_29
PATH : C:\Oracle\Middleware\jdk160_29\bin
The above dose not include any space between path
I ran the startWebLogic.cmd and got same error
After that I also added
CLASSPATH : C:\Oracle\Middleware\jdk160_29\lib\tool.jar;C:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic.jar;C:\Oracle\Middleware\jdk160_29\bin
WL_HOME: C:\Oracle\Middleware\wlserver_10.3
I ran the startWebLogic.cmd and got same error
I also used earlier path which I used with eclipse when I was working on other java development.
JAVA_HOME : C:\Program Files\Java\jdk1.7.0_21
PATH : C:\Program Files\Java\jdk1.7.0_21\bin
I ran the startWebLogic.cmd and got same error
Then I also gave PATH: C:\Oracle\Middleware\wlserver_10.3\server\lib      (including the existing one using ; )
I ran the startWebLogic.cmd and got same error
Now may be there is a file called setSOADomainEnv.cmd in
< C:\Oracle\Middleware\user_projects\domains\soa_div_domain\bin\ setSOADomainEnv.cmd>
That include some values for memory set :
set JAVA_OPTIONS=%JAVA_OPTIONS%
set DEFAULT_MEM_ARGS=-Xms512m –Xmx512m
set PORT_MEM_ARGS=-Xms512m –Xmx768m
if "%JAVA_VENDOR%" == "Oracle" goto OracleJVM
set DEFAULT_MEM_ARGS=%DEFAULT_MEM_ARGS% -XX:PermSize=128m -XX:MaxPermSize=768m
set PORT_MEM_ARGS=%PORT_MEM_ARGS% -XX:PermSize=256m -XX:MaxPermSize=768m
now as I change the red highlighted value to 512 value because I have less memory resource and I checked in installation documentation to change the above red highlighted value to 512 original is 1024 which is too high and it was crating problem and showing memory space problem so I change it to 512 and now I am not getting that memory space problem error but may be the above error is related with change value in setSOADomainEnv.cmd file or not
Following are my domain, weblogic and soa home directory path and all these path are exactly what it suppose to be according to Oracle Installation Documentation:
WebLogic :
C:\Oracle\Middleware\wlserver_10.3
C:\Oracle\Middleware\coherence_3.7
C:\Oracle\Middleware\oepe_11.1.1.8.0
SOA Oracle Home Directory :
C:\Oracle\Middleware\Oracle_SOA1
OSB Home Location :
C:\Oracle\Middleware\Oracle_OSB1
Domain name : soa_div_domain
Domain Location :       C:\Oracle\Middleware\user_projects\domains
Application Location : C:\Oracle\Middleware\user_projects\applications
Domain Location:        C:\Oracle\Middleware\user_projects\domains\soa_div_domain
form here i am trying to start weblogic : C:\Oracle\Middleware\user_projects\domains\soa_div_domain\bin\startWebLogic.cmd
Please tell me any body want more details.
Thanks.

I think you are missing a character '-'
USER_MEM_ARGS="Xms512m -Xmx512m -XX:MaxPermSize=128m"Add this character like follows
"-Xms512m -Xmx512m -XX:MaxPermSize=128m"

Itunes won't start - I get error message to re install due to missing registers

iTunes won't start - get error meassage to reinstall - did that 9 times still won't start

See Troubleshooting issues with iTunes for Windows updates. Should you run into problems please post the full and precise text of any error messages.
tt2

XP Services dont start up; get Error 1068 when try to manually start them.

Hello, I'm running Win XP Pro SP3 on a Lenovo T42, which was running fine. When I boot now, only 25 services start up, and I cant get to Internet or run some key apps. When I use Services.MSC to show the services, many Automatic services are not running.
When I try to start Network Connections, for example, I get Error 1068, 'The dependency service or group failed to start.'
When I try to run System Restore from MSConfig, I get 'System Restore is Not Able to Protect Your Computer'.
I've tried various configurations under MSConfig?General and the results are the same.
Any ideas are appreciated. Thanks....BT

You can read through these Microsoft Knowledge based articles which may resolve some of you issues
1) http://support.microsoft.com/kb/827328
2)http://support.microsoft.com/kb/888016
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Win 7 Clean install Firefox 7.0 install ok, but when trying to start Firefix, get error- "XULRunner "Couldn't load XRE functions.""

Tried turning off antivirus/antispyware - nstill get error msg.
Also have Thunderbird installed.

When you say "clean install", do you mean that you also manually erased the C:\program files\mozilla firefox folder before installing, to remove any remaining files from a previous install?
If so, it seems there is a problem with your profile. Have a look at https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting, and perhaps more specifically https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile and follow the instructions there for how to test if the problem goes away with a new profile.
Just post back here if you have questions.

Starting Broadcaster - getting Error 400

Hi Experts,
we're on BW 7.3 using WAD 7.0 template.
In this web template I call launch broadcaster, setting with no wizard and current template.
On development it works, on Q not. The Broadcaster setting window doesn't open, instead I get Error 400 bad HTTP Request..
The strange thing I can broadcast the web template from WAD using 'Publish', but not in the portal, pressing the button to launch broadcaster.
Maybe an authorization problem?
ST03 trace turned out with no problems.
Any idea is welcome.
Regards,
Jürgen

Hi,
Try Note 1921802 - 400 Bad HTTP request Error.
Best regards,
Michael

OTM 6.1 installation - errors starting weblogic - authenticator error

Installed OTM 6.1, followed the Administration guide, cannot start the weblogic server, log as follows: Has anyone seen this error before?
####<Jul 19, 2010 2:14:56 PM CDT> <Critical> <Security> <okmdevxx> <gc3-okmdev1001> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1279566896269> <BEA-090470> <Inconsistent security configuration, the otmrealm security realm has been configured to use security data in deployment descriptors but no DeployableAuthorizer has been configured with deployment enabled.>
####<Jul 19, 2010 2:14:56 PM CDT> <Critical> <WebLogicServer> <okmdevxxx> <gc3-okmdev1001> <Main Thread> <<WLS Kernel>> <> <> <1279566896280> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.security.service.SecurityServiceRuntimeException: [Security:090411]Security Realm [otmrealm] improperly configured
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:439)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: weblogic.management.utils.ErrorCollectionException: [Security:090519]The realm otmrealm is not properly configured. Follow the directions in the following errors to correctly configure the realm.
[Security:090520]The realm otmrealm does not have an authenticator configured. To correct the problem, configure an authenticator.
at weblogic.security.internal.RealmValidatorImpl.validate(RealmValidatorImpl.java:53)
at weblogic.management.security.RealmImpl.validate(RealmImpl.java:53)
at weblogic.management.security.RealmMBeanImpl.validate(RealmMBeanImpl.java:2632)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:435)
... 8 more
>
####<Jul 19, 2010 2:14:56 PM CDT> <Notice> <WebLogicServer> <okmdevxxx> <gc3-okmdev1001> <Main Thread> <<WLS Kernel>> <> <> <1279566896321> <BEA-000365> <Server state changed to FAILED>
####<Jul 19, 2010 2:14:56 PM CDT> <Error> <WebLogicServer> <okmdevxxx> <gc3-okmdev1001> <Main Thread> <<WLS Kernel>> <> <> <1279566896322> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Jul 19, 2010 2:14:56 PM CDT> <Notice> <WebLogicServer> <okmdevxxx> <gc3-okmdev1001> <Main Thread> <<WLS Kernel>> <> <> <1279566896325> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Jul 19, 2010 2:14:56 PM CDT> <Info> <WebLogicServer> <okmdevxxx> <gc3-okmdev1001> <Main Thread> <<WLS Kernel>> <> <> <1279566896332> <BEA-000236> <Stopping execute threads.>

Welcome to the forums !
This forum is meant for database installation issues. You might get a better/faster response in the Weblogic install forum - WebLogic Server - Upgrade / Install / Environment / Migration
HTH
Srini

On starting FF, get error 'the update cld nt be installed.Make sure no other copies running' even from cold. Have reset but still persists.

On starting Firefox (Windows 7), even from a cold boot I get a dialogue box with the message 'The update could not be installed. Please make sure there are no other copies of Firefox running on your computer and then restart Firefox to try again'
I have checked task manager and there are no other copies.
I have downloaded the latest version 29 Firefox but the error persists.
I have reset Firefox to default state but the error still persists.
Help please!

There are a few old methods for troubleshooting this but no longer maintained:
[https://support.mozilla.org/en-US/kb/update-failed-error-message-when-updating]
Sometimes there are other programs that might be preventing the update, as well as a need for a clean reinstall. However it is odd that this has happened two versions in a row. Does your firewall or antivirus allow updates to Firefox? [http://kb.mozillazine.org/Firewalls]
If you restart the computer does the error message still happen when you try to update from the About Firefox page?
A manual installation can always be done [https://support.mozilla.org/en-US/kb/how-download-and-install-firefox-windows]

Downloaded firefox 5.0.1 last night, worked fine, Turned computer on today, Mozilla Firefox, it won't start. Get error message, Error: Platform version '5.0' is not compatible with minVersion =5.0.1 maxVersion =5.0.1" What do I need to do to fix it?

We downloaded firefox 5.0.1 last night, began working with it. It did fine. After about an hour, I turned off my computer. When I turned on my computer, I click on Mozilla Firefox and it won't start. I get this error message, " Error: Platform version '5.0' is not compatible with minVersion >=5.0.1 maxVersion <=5.0.1" from XUL Runner. What do I need to do to fix it?

The updater wasn't able to update all the files and some were left as older versions.<br />
Do a clean reinstall.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup

Premiere CS6 won't start. Getting error message.

I am getting this error message:
The procedure entry point ? DrawPixels@DC@UIF@@QEAAXPEBXHHHV?$ParamPoint@VCPoint@@@ASL@@@Z could not be located in the dynamic link library UIFramework.dll.
My computer crashed and I had to reload Windows 7... fresh install and then have to reload all my programs. Photo Shop CS6 opens okay, but Premiere does not. Any ideas what I need to do?

Wasn't able to wipe the drive myself... computer probably has a virus that is preventing me from doing this. Took the computer in to my computer guy in Reading to have a clean install done on the c drive. Also, I have been editing for a an ad agency client on their CS6 system... the first job I did for them, I exported the CS6 edit file to a usb thumb drive and brought it to my computer to make a very minor change to an edit done by their inhouse video editor (he had been let go). Long story short... in a 3 minute video the timeline was nested... and clicking on the nested sequence took me to another sequence that had multiple nested files... clicking on them did not take me to another sequence! There where 11 different sequences for this 3 minute video and none of the other sequences linked to anything... which is why I took it to my office and re-edited the 3-minute video on ONE timeline! Still not sure why this editor had nested everything... very strange way to edit what was esssentially was an interview... person answering 3- questions... with a transition which was basically the question on the screen followed by the interviewee's answer! Since doing this edit I have had issues with my computer. In the meantime I have been editing some videos for this agency and their computer was having issues including freezing and not being able to open the task manager to shut down CS6 after a freeze. I would have to just shut the computer off to re-boot! The last edit I did for them last week took 6 hours to do something that should have taken 3 hours at the most.
Dave

Starting Rman getting error PL/SQL package not current

I come across a problem. My server is windows 2003 and Oracle is 10g Release 2.
My previous DBA install Oracle 10g R1, 10gR2 and Oracle Data Warehouse Builder 10g on the same server at different Oracle_Home. When I came to this work. I tried to use Rman for backup. When i went to server command line, type Rman, Rman target /. the error message was:
PL/SQL package SYS.DBMS_BACKUP_RESTORE version 10.02.00.02 in TARGET database is not current and PL/SQL package SYS.DBMS_RCVMAN version 10.02.00.02 in TARGET database is not current.
I found the solution from oracle_metalink ( Note:429499.1). I followed note to use Oracle Universal Installer to move the 10.2.0.2 home. Then I can start Rman. Then I fixed some other small errors. I came back to loginto Rman. The system told me the same errors. I used Oracle Installer to check the Oracle_Home. Only two home exist. One is 10gR2 10.2.0.2. Another one is data warehouse builder with version 10.2.0.3. So it seems that 10gR2 Home is not current. How can I remove this Oracle_Home? If I remove it off, database will be dead. So if I remove oracle data warehouse builder, will it make two PL/SQL package for Rman current? or I have to remove DW builder first, then patch 10gR2 Home to 10.2.0.3? Please help. Thanks.

damorgan:
No. it is not related to oracle_home and oracle_sid. It is related to PATH setting. I have solved the problem. Thanks for your comment.

How to get objects necessary for transporting Business Content?

Hi Experts,
Small ques for u:
I have installed 0FIAA_C11, 0FIAA_C12, 0FIAA_C13 for Asset Accounting in Dev system. Already the previous content 0FIAA_C04 was installed and transported to Quality system.
Now I want to transport new content (0FIAA_C11, 0FIAA_C12, 0FIAA_C13) to Quality. But I guess since already some infoobjects were transported to quality, transport connection wud nt show me all necesary objects.
<b>So how to get a list of all objects necessary</b> so that my req does nt fail while moving to production from quality.(I think req might not fail while goin from Dev ->quality).
Thanks in advance!!
Sorabh

Hi Srini,
I have already applied "Before setting". But the problem is I dont want to transport objects which are not relevant to me, but only those which are necessary for content described in previous mail.
If we check the link provide by you " For activating an InfoSource, InfoObjects may also be necessary which are not contained in the InfoCube and have therefore not yet been collected. However, for these additional objects, the objects that come before them in the data flow are not collected.
" I am worried by about these.Some objects will be missing and some are in addition which are not all required, and we shud nt transport them.How to be sure tht transport will not fail and it is consistent as well?
Thanks for replying!!
Sorabh
Message was edited by: sorabh arora

Itunes will not start, always get error message

I had to reinstall Itunes and ever since I always get an error message stating "Itunes has encountered a problem and must be restarted" I have tried to restart computer, uninstall every Itunes thing several times, updated to newest Itunes program with out any luck. I have run virus scans, spyware scans and still nothing. The only thing that appears with error message is option to debug but that also does nothing.

Have you went here and installed "Quicktime WITHOUT iTUnes" making sure antivirus is disabled? http://www.apple.com/quicktime/download/win.html

PowerBook G4 won't start up - getting error message

When I tried to start up my PowerBook G4 this morning I got the following error message -
"Invalid memory access at %SRR0: ff849808: 0000b030"
It says "to continue, type "mac-boot" however, the keyboard doesn't respond when i try to type anything.
Any help would be very gratefully appreciated. Thanks.

can you boot from the install DVD?
maybe try zapping PRAM also:
http://docs.info.apple.com/article.html?artnum=14449

On start up, get error message "The proxy server is refusing connections". Have dial up and no network. Changed my dial up from Localnet, which I uninstalled on my computer, to free dial up. Explorer works, but Firefox just gives me this error message.

Nothing else to add.

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

On starting WebLogic getting Error : Listening for transport Error

Similar Messages

Maybe you are looking for