On Sympatico homepage, my local weather and news does not come up unless I refresh the page. But when I return to the homepage during the same session, local news/weather is gone again. Is this correctable?

When I first open the browser and it goes my homepage, Sympatico.ca, there are 2 areas of the homepage you can personalize. On the left hand side "News" Column, the bottom box "Local News" allows you to select a location (Toronto, Ontario Canada for me) to display news from that area. On the far right hand column, below the advertising bar, is "Weather" where you select your city (Brantford in my case) and it will display the 4 day forecast in C or F degrees. Once you close the homepage the settings are saved. The problem is that when I leave the homepage to any other website, if I return to the homepage the weather and local news is back to the default setting of having to select the city again. I did find if I just refreshed the page, the personalized settings appear. I have Firefox 4 and it seemed to correct the problem when I installed 4 as the same problem had been occurring with my previous version of Firefox. But now it's back to having to refresh the page to get the saved location for local weather and news. My wife uses IE8 on the same PC and has not had this problem on her Sympatico homepage.

aha!
Wed Feb 14 12:29:16 2007
PUSH:
Received control message:
'PUSH_REPLY,
route 192.168.100.3 255.255.255.255,
route 192.168.1.0 255.255.255.0,
route 192.168.3.0 255.255.255.0,
route 172.16.0.0 255.255.0.0,
route 10.123.123.0 255.255.255.0,
redirect-gateway,
dhcp-option DNS 172.16.70.12,
dhcp-option WINS 172.16.70.2,
dhcp-option DOMAIN timberline.int,
route-gateway 172.16.70.254,
ping 10,ping-restart 120,
ifconfig 172.16.70.216 255.255.255.0'
The ifconfig line the server is pushing is not right. That is meant for a point to point connection. That is why the local client is puking on it...it is not correct. At least for a tun type device. If it was a tap, then it would be fine.
http://openvpn.net/man.html
(look for "--ifconfig l rn" )
so.... change the line to dev tap, and then do this stuff..
http://wiki.archlinux.org/index.php/OpenVPN_Bridge

Similar Messages

  • TS3694 Hi, My iphone 5 loses the 3G connections everytime i go into tunnel and also to holland park and it does not come back untill i restart the phone? i dont know why is it happening?

    Hi, My iphone 5 loses the 3G connections everytime i go into tunnel and also to holland park and it does not come back untill i restart the phone? i dont know why is it happening?

    Hi, beth.lau.gr.
    Thank you for visiting Apple Support Communities.  
    I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen.  I wont be able to give you an exact answer as to why this is happening.  However, this is the most relevant troubleshooting article for this issue.  This article also provides options to reach out to us via phone for additional assistance.  
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it
    http://support.apple.com/en-us/HT203899
    Cheers, 
    Jason H.  

  • HT4199 My macbook pro and ipad does not recognize my printer on my wireless network, but my pc does. How can I get my apple products to see it on the network so I can print wirelessly?     My printer is a Brother MFC-J270W

    My macbook pro and ipad does not recognize my printer on my wireless network, but my pc does. How can I get my apple products to see it on the network so I can print wirelessly?     My printer is a Brother MFC-J270W

    try disabling email scanning for incoming mail.
    One of the last things that occurs is the mail server and Thunderbird sign off on "where we are up to" and Thunderbird stores this state information in the popstate.dat file in your profile (there is one in each POP mail account folder). If the anti virus, or you for that matter, end the conversation a few seconds early that hand off does not occur and the popstate is not stored.

  • I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. Help

    I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. has anyone used this devive (AV360) on there own 27" thunderbolt display (not the imac) and gotten it to work? If so I'd appreciate the help.

    There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • TS3048 My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.

    My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.What can I do?

    Hello:
    Try resetting the SMC and PRAM.
    Barry

  • HT1338 I can't update my laptop why is it? I di all the process and it says it should restart with a gray screen and a status bar and it does not it just goes back to the regular screen

    I can't update my laptop why is it? I di all the process and it says it should restart with a gray screen and a status bar and it does not it just goes back to the regular screen

    You will need to contact support to have your account sorted.
    https://expresslane.apple.com/GetproductgroupList.action

  • My network goes off and does not come back unless I switch off and switch on

    I have a vodafone connection.
    Whenever I go underground while traveling in train, my network goes off and but does not come back unless I switch off and switch on the phone... any suggestions???

    I would advice to perform a hard reset (holding Power button + Home button for at least 10 seconds until Apple Logo appears)

  • How come the song and album does not show up on top of the new iTunes?

    I just downloaded the new iTunes and when I go to play a song, the title and album does not show up on the top of the screen.  The only thing that is there is the Apple logo.  Does anyone know why this is? and how can I get it to show the song title and album.
    The song is playing right now, but it is not showing up where it used to.  (Where the Apple logo is)

    See also:
    *https://support.mozilla.com/kb/Removing+the+Search+Helper+Extension+and+Bing+Bar
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    *http://kb.mozillazine.org/Resetting_preferences

  • TS3899 WWhen I try to access my email, I can see mail in the preview page but when I click to go to my inbox it bounces back out to my password again, so I re-enter password and it just keeps bouncing out - help!

    Hi
    When I try to access my email I can see mail the preview page but when I click to go to inbox it bounces back out to my password again.  I re-enter password and it does the same again.  I've found only way to access is if I clear cookies and history first which obviously I would rather not have to do everytime. Anyone got any answers for this one please.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • HP Envy 15" TouchScreen Power LED shows up, but fans not running and screen does not come on

    Hello there!
    I am a 1A Software Engineering student at University of Waterloo, and I am running into a very serious problem with my HP Envy 15" TouchSmart laptop running Windows 8.1. This is a problem that just started today, and I would rather get some support from here first before I go see the technical support office sometime tomorrow; it has to do with the screen and fans where the Power LED lights up white, just as when the laptop is running properly.
    (I do have warranty on the laptop since it was bought last June, except that if I find out I need to get a replacement, I'll lose all of my work I've been doing on it ever since I started my semester. It's so ridiculous of me to not have all of my work saved on a backup, as I do have an external hard drive. Trouble is, I got way too many problems in getting myself organized, I am not being open-minded as I should, and worst, I am not finding a balance between homework and life.)
    Before I had my MATH 117 (Calculus 1 for Engineering) lecture, I was in a lab nearby where my laptop was opened and turned on, functioning properly. I had NetBeans IDE running since I wanted to work on the second part of my current CS 137 (Programming Principles) assignment. Because it was almost time for my lecture, I closed the laptop by simply moving the screen back down onto the keyboard, where it goes into sleep mode. (Anytime I flip up the screen, the laptop is supposed to come back on, and the login sliding screen from Windows 8.1 shows up.)
    When I took my seat for the lecture, I wanted to spend a little bit of time to work on my programming assignment. However, upon flipping the screen back up, instead of having the login screen show up, I encountered the problem: the Power LED is showing a white light, but I can't hear the fans running from the vents on the left side of the laptop, and the screen does not turn on. I did try to hold the power button for several seconds, and once at least 10 seconds, except that the Power LED keeps on showing a white light. The light for the Wi-Fi board does not show up.
    Whatever it is, I don't want to pull the battery out because I did do that on my last laptop, and it was from there that I couldn't turn the old one back on again. If I pull the battery out from the Envy laptop, it'll short-circuit the connections from the battery to the computer, and thus several components will fry. For now, what I'm doing is leaving the laptop as is to drain the charge on the battery. And then, once I notice that the Power LED does not show a white light anymore, plug the AC adapter, then try turning the laptop back on using the Power Button.
    It's going to take a little while for the circuit to drain the charge on my battery though...
    Anyway, would you please be so kind as to help me out with this issue? I would really appreciate it if you can give me several recommendations. Thank you!
    This question was solved.
    View Solution.

    Hello @GregPDesWHP,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your notebook computer is not powering on, and I would be happy to assist you in this matter!
    In order to regain functionality of your computer once again, I recommend following the steps in this document on Computer does not start (Windows 8). If the issue continues after exhausting all of the steps in this document, I recommend contacting our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Regards  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • TS3274 I plugged in my earphones and it does not work. it still plays on the Ipad speaker

    I plugged in my earphones and they do not work, it just playes thru the Ipad mini's speaker

    To do this in iMovie 11. use the SHARE menu. Share your project using the Share menu and choose Export Using QuickTime.
    In the Dialog box that comes up, choose Sound to AIFF, or one of the other sound options. This will create a file that you can drag into iTubes.

  • I purchared an iPhone 4s from Dubai and it does not have FaceTime on it.  The phone is now used in Europe. How do I get to instal FaceTime please?

    I purchared an iPhone 4s from Dubai and find that it does not have FaceTime on it. 
    The phone is now used in Europe.
    How do I get to instal FaceTime please?

    The iPhone from Dubai will never be able to have FaceTime. The iPhone country of origin (serial no. and imei no.) is the culprit. The government there has banned FaceTime.

  • HT201328 I turned my 4s off and it does not come back on ????

    I turned my 4s off by using top button, tried to turn back on and it did not come on ?????

    Have you plugged the charger into it?

  • For the second time (I've been to the Genius Bar once already) my WiFi isn't working on my iPhone 4S. This is really infuriating and costly!!! I see others have the same issues.  Can't Apple do anything about this?  It's obviously a hardware problem!

    For the second time (I've been to the Genius Bar already once with this) my Wifi isn't working.  They gave me a new iphone last time, but the new one has the same issue as the old one, I'm guessing.  I've tried resetting the network but that doesn't work.
    I see others have this issue too.
    If this is a hardware problem why doesn't Apple fix it?  Or do I just have to wait another year for another upgrade?
    Currently it's not costing me anything - yet - because I've got the Apple Warranty but this is totally frustating!!! I bought the original phone (which has been replaced in July 2012.  The new phone (without working Wifi) is a month old.
    Will try Restore via ITunes before (I will invariably) have to return to the Genius Bar for another Iphone 4S unless someone has an ingenius solution here?..?

    sematson wrote:
    If this is a hardware problem why doesn't Apple fix it?  Or do I just have to wait another year for another upgrade?
    For what reason, other than making yourself look foolish, would you ask questions that we users could not possibly answer as we're NOT Apple?
    Basics from the manual are restart, reset, restore from backup, restore as NEW.  Nothing more "ingenius" to suggest than these steps that Apple has outlined in the manual.  If these steps don't work, then go back to the Apple store.

  • My wife was looking for me last Friday morning with the app find my phone.  The app showed that I was not where I said I was and she does not believe me.  How is the explanation for this mistake, I know where I was at but she is very upset.

    Please help!!! My wife has a Samsung galaxy 4s, and she was looking for me last Friday (09/19/2014) morning with the find my phone app.  I have a iPhone 5S and the app placed me in a location about 5 or 6 miles away from where I was actually at.  My wife if very up set and thinks I am lying to her.  Is there a way to get here the proper information so she does not have to feel like I am a lier.  This is a big problem and I need help. I can get video but it is very  expensive and takes a court order. I truly need help with this I have kids and this is problem is destroying our marriage.
    Thanks
    Greg Soileau

    How was your wife using the Find My iPhone app from a Samsung phone? But, that question aside, your wife should educate herself on how GPS works, especially on a cell phone. GPS signals can be interfered with by trees, buildings, clouds. Off by several miles would be unusual, though.
    If your wife is tracking your cell phone and not believing what you tell her, you may want to consider counseling as there are some very serious issues that go way beyond the technology.
    Best of luck.

Maybe you are looking for

  • IPad Internet access when WiFi and Cellular features are disabled

    Local security policies require me to disable all wireless communications on devices operating within specific "Controlled Access" areas.  Is there a specific lightning (cable) adapter I could use to connect an iPad device to a hardwired Ethernet cab

  • Daily news app not updating

    I have the daily new app for my ipad 1.  I keep getting the previous day's news not the current day. 

  • Vista - WRT54G Wireless Router Problem

    I'm sure your all tired of answering this question or variations of, but here we go. I have a WRT54G V.6 wireless router running a hard wired pretty new Hp Pavallion With Vista Home premium. It's running an AMD Athlon 64 X2 Dual Core 5000+- 2.60 GHz

  • How to migrate MySQL stored procedure to Oracle

    Hi All, I migrated mysql 5.1.42-enterprise-gpl-advanced DB to oracle using sqldeveloper 3.1.07 tool. DB objects migrated successfully except Stored Procedures. I verified .sql and Out files.. Capture process not captured stored procedures SQL. Could

  • Feature Request: Ability to modify corner radius on boxes after creation

    Hi. As an interface designer I often use the rounded box tool to create buttons. I noticed that you can only select the corner radius at the time the box is created and not modify it thereafter--your only option is to delete the shape and create a ne