On V4.0, I am unable to get Firefox to save my passwords for critical websites I use frequently. I have followed the recommended procedures to insure that I am asking Firefox to remember passwords.
I have gone to tools, options, security and have made sure that remember passwords is checked, but I never get the request to save the passwords when accessing websites requiring username and password. I am using Windows 7 Operating System.
I spent hours trying to remedy this yesterday but eventually discovered that if you click twice (not a double-click) in the slot, Firefox shows your name and password. So many things not functioning and/or unexplained in Firefox 4.
Similar Messages
-
I have a Macbook Air with Lion and have downloaded for the Pico Pix 2055 which I am unable to run. How do I override the security. I have followed the Mac procedure but to no avail :-(.
See the heading "How to open an app from a unidentified developer" on this support page. The instructions apply to installer packages as well as applications.
-
I need to know how to get that store password feature to come back or how is there a way to manually save it.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Videos stopped playing correctly. Now I get a black screen, then a few seconds of video and it freezes. I downloaded the latest Adobe Flash player
and it did not change anything. Thanks for your help. CPOne of the following steps should help.
1. System Preferences > Other/ Flash Player > Advanced > Delete All
Press the "Delete All" button
Install Adobe Flash Player.
http://get.adobe.com/flashplayer/
Quit Safari.
Restart computer. Relaunch Safari.
2. Enable Plug-ins
Safari > Preferences > Security
Web Content: > "Enable Plug-ins".
or
Internet Plug-ins > "Allow all other plug-ins
3. Check whether you are currently in YouTube HTML 5 trial.
http://www.youtube.com/html5
At the bottom left of the page uncheck the box beside
"You are currently in the HTML5 trial".
4. Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Uncheck the boxes beside all items.
Check the box beside "Remove all website data".
Click "Reset".
5. Turn off Extensions, if any.
Safari > Preferences > Extensions
Now try YouTube.
Best. -
I have followed the instructions to reset my password but i am still unable to disable my iPad. How do i get my iPad to stop the disable and turn it on?
Might you have a newly acquired iPad that is still locked to someone else's Apple ID? If that is the case, then you will need the former owner's Apple ID and password to proceed. That feature is called Activation Lock and described here:
http://support.apple.com/kb/PH13695
If you cannot get that former owner's Apple ID and password, you will never be able to use the iPad. -
I have followed the steps under security within Firefox to remove a saved password, but it hasn't actually removed it. I removed it and then tried to sign on again and it automatically went to the saved password. This URL uses an admin and a general password and I accidentally saved the general password so unable to open as an admin. When I go to the URL to enter my admin password it goes to the saved general password. As administrator for my church website, I can't get into it and make changes without using my admin password.
Remove saved Password(s) here:
* Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
* http://kb.mozillazine.org/Deleting_autocomplete_entries
* http://kb.mozillazine.org/Password_Manager -
Hello How do I set up Firefox 8.0 so that It will Ask me if I want to save a Password for a website. At present I don't get an option every time I go into a website that I know is secure I have to enter username and password. I have been though tools etc.
Thank you any help would be help full as every time I log into Face Book for example I have to provide all the Information and this is a pain
Cheers AlexThe website may be using autocomplete=off to prevent Firefox from saving the name and password.
You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
*http://kb.mozillazine.org/User_name_and_password_not_remembered
*Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/ -
Since upgrading to Snow Leopard yesterday, twice I've been unable to get my screen saver to release back to my working desktop. Anybody else have this issue?
For a few users, since some point in OS X 10.6 Snow Leopard, there has been an occasional problem when trying to wake from sleep if you have Bluetooth enabled for the keyboard, Magic Mouse, Trackpad, etc.
The solution for me that worked 100% of the time was: System Preferences>Energy Saver and set 'computer sleep' to 'never'.
For me, the problem ran intermittently through 10.6.something, all of 10.7 and now, finally, seems to be resolved in 10.8.2. -
Cant remember my password for my mac air.. how can i reset the password?
cant remember my password for my mac air.. how can i reset the password?
Start it up from the software reinstall drive or Mac OS X DVD and use the reset password function. If needed, restart with the Option key held down.
(59271) -
I asked firefox to remeber a password for a website and it's the wrong password. How do I change it?
I asked Firefox to remember a password for a website and it's the wrong password. How do I change it?
The left side of the address bar contains a button you can click to get information about that site. The button usually has a little mini-icon for the site and (if it's an encrypted site) the site's name. When you are on the site in question, click that button then click the "More Information" button on the dialog that appears. Alternatively, you can use the Tools menu and click "Page Info". Once you do that (either way) click the "Security" tab at the top and you will be able to click a button to view saved passwords for that site. Delete the incorrect password from that list. You can then log off the site and log back on to have Firefox offer to remember the new password.
-
I cannot get my HP Officejet 6500A Plus 710N to print in color. I have reinstalled the drivers..
I cannot get my HP Officejet 6500A Plus 710N to print in color. I have reinstalled the drivers. It used to print in color and just stopped. I think it may be a settings issue? I have checked the ink levels and they are all fine. When I print a diagnostic report on print qualify, the black prints well, but there is no color printing.
Okay, I had the same problem. It's most likely your printhead. All you have to due is clean it.
Note: I was sceptical of this approach but can fully attest to it's sound results as it restored my printer back to full functionality. Prior to this the printer only would print Black ink.
The print head is the carriage that holds all of your ink cartridges in the printer. On the 6500A it's super easy to remove. Opent your lid like your changing your ink cartridges. Remove all of your ink cartridges. Once they're out. There is a lever on the left side of the carrier that holdes your ink cartridges. Lift it up and the print head comes right out. Net take your print head to the sink and run it under hot water aiming towards the the four cirles were the ink flows into. Keep running it under the hot water until it is coming out clear. It's okay to run it under the bottom part too infact you'll need to inorder to get it completely rinsed out. Also don't touch the computer metal strips with your hand thought you can run water over them. Once your done rinsing use a blow dryer or a can of compressed air (thats what I did) to dry every thing out. I was able to get everything dry in about 5 minutes or so. Let it sit for a few minutes and check it again for water. I recommend moving it around to get full exposure to insure it is dry. Also if you use a hair dryer try to put it on a cold setting since there ar rubber grommets the surrount the inlet ink ports you wouldn't want to melt them with the hot air etc.. Like I said I used a can of compressed air. It's important to use a quick method of drying as mentioned otherwise mineral particles could become deposited on the unit. This won't happen with the methods as I've described because the molecules won't be able to bond since your blowint them off. Oh yeah, you'll want to place a clean peice of paper down as your blowing because at first you'll end up with a few black jet marks as your blowing. Also don't wear your favorite white shirt lol.
Okay once it's dry replace the print head carriage back in push the lever down install the ink cartridges. Close the lid then unplug the printer. Wait 5 seconds plug it back in then it will reboot and start its set up procedure kind of like whet you first bought the printer except you won't have to change any of your network or setup setting since they are saved in memory. Also be patient about the set up procedure it seemed very slow for me. Once it finishes you will be prompted to run the printer alignment process. Run the alignment process and you should be all good. If not at least you gave it a shot. If this doesn't work your going to have to pay $60 for a new printer head. Which is not that big of a deal but hey if you can fix it for free why not. If you do decide to buy a new printer head you might find deals online or ebay just make sure it's an Genuine HP print head. And lol use the Genuine HP ink cartridges. Finally make sure you print at least on colored page per month to make sure the ink doesn't clog up in the future.
Remember this suggestion is after you have run the HP clean ink cartridge procedure twice. Sometimes the clean procedure will correct the problem first. Also there is video I watched on YouTube about this just search for "Clean HP 6500 print head. Hope that helps
Once it's all dry just reinstall the printer head carriage -
I have followed the steps above for downgrading iCloud storage options, but when I get to the screen to select a downgraded option, the Done button is grayed out and won't let me select a new option. I see a lock in top right-hand corner, but not sure where to go to unlock it.
Choose Apple () menu > System Preferences, then click the iCloud icon.
Click the Manage button.
Click Change Storage Plan.
Click Downgrade Options.
Enter your Apple ID password, then click Manage.
Choose your current plan, then click Done.
(from http://support.apple.com/kb/HT5527 ) -
If I choose never save password for a website and want to reverse that how can I, no exceptions are listed.
You can remove that site from the exceptions: Tools > Options > Security: Passwords: Exceptions
See [[Remembering passwords]] -
My daughter forgot her password but her iPod was never synchronize with my iTunes library. We have followed the suggested steps but when it comes to restoring the settings it says 'cannot connect to iTunes support server'. We can't get any further than this. Any suggestions?
Was it really update server?
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem -
I have successfully deauthorised my old computer but a unable to authorise my new machine. I have followed the instructions but there is no option on the store menu to 'Authorise this computer'. Please help!
There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:
Maybe you are looking for
-
Compliments to S.Jobs for IOS4
i have been using iphone 3gs with ios4 since it's launch, after updating to 4.0.1. its as good as the company said in it's statement that [we are not perfact]. except low sound with ipod playing, there is no problem at all signal bars are full as the
-
This should be very simple but I've been wrestling with this for quite a while and despite going to the books, the tutorials, etc., I cannot seem to solve this simple problem. Under folders I have, in red, a series of folders. I like to arrange my fo
-
Calender Control in Developer 9i
Immediate reply requested please. I want to call the builtin calender control in the date field. How can i use it or from where i get the calender controle builtin is there any option in 9i or not? Please immediate reply
-
Start java-Program when Tomcat starts
I have a TimerTask, that should be executed every hour (war in webapp of Tomcat). If Apache Tomcat will be shut down and started again, Task won't be executed. Can I define somewhere, that some class should be executed when Tomcat server starts and a
-
what is the main purpose of scheduling ?Can scheduling be done only with an agent ? what are the different types of scheduling i.e scenario scheduling,poject scheduling ,procedure scheduling,model scheduling, and what is the difference between them ?