One calendar view does not show up when configure calendar overlay in sharepoint 2010

I created 5 views for a calendar and wanted to create a calendar overlay to show all 5 views.
Events 1
Events 2
Events 3
Events 4
Other events
but one view named "Other events" is not showing up when selecting view from "calendar" list.. (only the other 4 views are shown)
I checked that the view is created correctly and listed in views section in list settings.
Don't know why ?
Appreciate any advice

Hi,
According to your post, my understanding is that one of your calendar view didn’t display when configured the calendar overlay.
Was the “other events” view created by the Calendar View format?
You can only select the view created by the Calendar view format when you configure the calendar overlay.
I had tested with five view as your description, they are all the calendar views, and all the views could display when I configured the calendar overlay as below.
You can recreate a new view or a new calendar, then check whether it works.
There is an article about creating Calendar Overlay, you can check with it.
http://deannaschneider.wordpress.com/2011/09/28/calendar-overlay-a-simple-sharepoint-2010-ootb-master-calendar/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Similar Messages

Month and Week Calendar view - does not show events that span days?

In the weekly and monthly calendar views, if you have an event, such as a show or an appointment where you will be out of town for several days, the view will only show the appointment for the first day, and not for the entire event life. For example, in MS Outlook, if you schedule an event that begins on Date 1 and ends of Date 2, spanning several days, the calendar will show the date range as blocked off. Does the calendar in CRM do the same? If so, is this a setup parameter?
Also, with the calendar, is there a way to have the small calendar in the left panel show the days with a scheduled event to be bold or somehow indicate that there is an event on that day?
Edited by: nsidev on Aug 11, 2009 6:38 AM

According to CRM Support
CRM Support wrote:the ability to block off a multi-day appointment in the Weekly and Monthly Calendar Views is not currently available on our product. However, we have submitted this functionality to our engineers as an enhancement request. At this time we are unable to provide an estimated time of implementation while this request is being analyzed and processed.
Simple things seem hard for the Siebel guys.
Edited by: nsidev on Aug 14, 2009 7:11 AM
Edited by: nsidev on Aug 14, 2009 7:12 AM

IOS 7 Calendar Day View does not show any all-day events ?

Hi,
I realize that iOS 7 Calendar Day View does not show any all-day events.
Is this a bug ?
Any help given is much appreciated.
Thanks and Regards.

Mine brings me right up to the current time, or in the case of another day, it takes me to the first appointment of the day.

A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?

Question repeated: A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?
I want to restore from my june 2012 backup because it contains pictures that i lost when my phone broke in september. if anyone could help that would be awesome. thanks

Did you tap "Show older backups" on the Choose Backup screen (see image below)?

I have just downloaded a free app and there is no icon and it will not open from the list even tho it appears to have downloaded and the "open" button is available. Does not show up when I search for it. Plenty of memory . . .

I Have an iPad mini running iOS 7.1.2, I downloaded a new app and it's icon does not appear anywhere ( have ~ 180 apps so not at limit) and it won't open from the purchased apps list. It does not show up when I search for it so can't open t that way either. It doesn't require iOS 8. Can't delete and reinstall, cause not icon. This is not a normal "app won't open" question. it doesn't start the. Stop it just doesn't seem to exist. Any help is appreciated

Hello Chelleuri,
Thank you for using Apple Support Communities.
The following article provides information to trroublehshoot issues with installed apps, including not opening.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Regards,
Jeff D.

When using photoshop elements as editor in iPhoto the pic does not show up when PS opens

When using photoshop elements as editor in iPhoto the pic does not show up when PS opens

Ralph9430 offers a good suggestion. But you may need to do this before taking his advice:
Check in iPhoto's Preferences (which you can open from the iPhoto menu). Look in General, and make sure "Connecting Camera Opens" is set to "Image Capture").
If it is set to "iPhoto", you won't be able to get to Image Capture easily.

My iphone 5 does not show callid when there is a call, i used to get it but after my trip to China, the cller id is always unknown, how can I get it back? thanks

Hi
My iphone 5 does not show callid when there is a call, i used to get it earlier but after my recent trip to China, the cller id is always shows unknown, how can I get it back? thanks

Thanks Malcom, I was able to restablish the caller id feature through the carrier as you suggested

TS4337 I have a Google calendar that is syncing with my iPad and on my MacBook Air. However, the calendar items are not showing up when I access iCloud via the Internet. Any suggestions?

I have a Google calendar that is syncing with my iPad and on my MacBook Air. However, the calendar items are not showing up when I access iCloud via the Internet. Any suggestions?

On the iPad tap Settings > iCloud
Toggle Documents & Data off then back on then restart your iPad.
Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
On the iMac open System Preferences > iCloud
Deselect the box next to Documents & Data then reselect it then restart your iMac.

4EA2 the Detail display for views does not show comments for the view

I am running in an Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production environment.
The Detail tab for a View does not show comments added for the view. I would like to request that the Detail tab be modified to display any comments added for the view.
This is important for me because I want to use the Generate DB doc function (from the right-click menu linked to schemas), to generate documentation, and that function uses the same format as the Detail Tab. The View Comments are important for my users.

Hi Penny Halsall,
Kindly check if that Facebook page can be followed by the public. If the profile can't be followed by the public, then the widget won't work as accepted.
Facebook provides instructions to check/do this here: https://www.facebook.com/help/201148673283205
OR
You can generate the associated HTML code from this page :
https://developers.facebook.com/docs/plugins/
Regards
Sonam

Droid razr maxx calendar does not show up on gmail calendar even though it says that it has synced?

droid razr maxx calendar does not show up on gmail calendar even though it says that it has synced?

I had this same issue. I solved it finally by downloading the free "official" google calendar disabling the phone calendar app (Google Calendar - Android Apps on Google Play) and disabling the phone calendar. Then you need to choose your gmail account to sync with your calendar app. Now my entries on the phone are showing up on my PC.

EMC Does Not Show All Databases Copies Information on DAG - Exchange 2010 SP2

Hi guys,
Really need your help here, suddenly my customer complain that they cant see any information on database copies on their Active Copy DAG Exchange server, for another DAG members, the database copies information is visible. After do some readings, I found
this related to Exchange 2010 SP1 known issue.
http://workinghardinit.wordpress.com/2010/09/13/emc-does-not-show-all-database-copies-after-upgrade-to-exchange-2010-sp1-still-investigating/
But, for my environment, there is Exchange 2010 SP2. I have no idea on this issue since there is no error log thrown out from the event viewer. I already try to restart the server itself and the Microsoft Information services but no luck.

Hi,
Based on the description, your customers could see passive database copy information, but they couldn’t view the detail information such as state: Healthy in EMC.
When did this issue begin?
Please restart the AD topology service to check result.
Since we have the information correctly on Exchange shell, please try to clear EMC cache and then open console to check if you can see database copy in EMC.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

Oam does not show the correct configuration information

Oracle apps,
An issue with the oam.
There are 2 nodes in our system. In 12
One is for db and cm
The other is for forms and apache.
The system is running fine.
But from the OAM, where it does not show the correct configuration info.
From the OAM, all the services are (including db, cm, forms, apache) on one node.
The issue might be caused by the fact that the web tier was cloned from the cm tier as a workaround for some patch errors in web tier.
I even used the EXEC FND_CONC_CLONE.SETUP_CLEAN; to clean the system tables and ran
Autocfg on all tiers. But it didn’t solve this issue.
How can I fix this OAM problem to make it show the correct information?
Thanks,
Lily

Thanks for reply.
Yes, I did commit it.
The hostname information is correct.
On oam, this web node is there but all the service actually running on this node is
showing under the cm node .
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>

Calendar issue - Does not show entries previous Ja...

Hi,
from beginning of January the calendar of my Lumia does not show any more entries made previously ! It was working but from I think 7th of January nothing .. The calendar is sync with outlook.com calendar and if I go to http://calendar.live.com I see all my previous data correctly.
I have tried to do a soft reset , nothing . I have tried to remote outlook.com account and reinsert , nothing !
I have installed an other calendar application called “chronos calendar” and this one show me some previous data last year but nothing from November-December ... I have written to microsoft community but no more info . I use a lot of the info of calendar for my job and for me it is an important issue !
I hope a fast solution ...
Regards,

Hi,
You can open a second calendar in a new window and display up to 30 calendars in side-by-side view. You can also overlay calendars to see transparent calendars stacked on top of each other. This view is useful when you want to find a common free time slot
on several different calendars.
In Calendar, in the Navigation Pane, right-click the name of another calendar that you want to view.
Click Open in New Window.
The calendar that you selected opens in a new Outlook window.
More information refer to the following article：
View calendars side-by-side or overlaid
Niko Cheng
TechNet Community Support

My ICal data does not show up on Subscribers Calendar

Following all of the instructions how to get my ICal information to another Apple Computer (Macbook Pro) however when we access the Macbook Pro the data from my Calendar does not show up. Calendar is there, just the data does not make it across.
Any thoughts.
Thanks Mark

Thanks for the information.
If you view the same calendar on the MobileMe website, do you see the events?
http://ical.me.com/yourmembernamehere/calendarname
If you don't see the events on the calendar web page then the publish did not go through succesffully. Un-publish the calendar, make a slight change to its title, and then re-publish and test.
If you do see the events on the website but still not in iCal on the 10.6.8 system:
1. First make an iCal backup: Click on each calendar on the left hand side of iCal 1 at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Remove the subscription for iCal to that specific calendar.
3. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
4. Launch iCal and re-add the subscription.
Hope that helps!

Dreamweaver Design view does not show parts of the page

Hello all,
I was working on a page update - page was created using a
template so
that the client can add content with Contribute - and have
discovered
that suddenly whole sections of the page are no longer
visible in Design
Mode. This caused me some panic until I viewed in code view
and found
everything still in there. Viewing in browser shows the page
there in
entirety too, and uploads just fine. But no matter what I do
- restart
the program, restart the computer - nothing changes, the page
design
does not show parts of this page. Everything is in an
editable area and
should be visible.
I have been editing the code as that was my only option, but
now I have
heard that my client cannot view those sections of the page
in her
Contribute either.
The page is here:
http://www.craft-design.ns.ca
Any help would be gratefully received.
Thanks
Ellie

> (I find it strange that it is now like this, as I
understood that th was
> depracated? So I went through and removed them all.)
<th> deprecated? Certainly not.
> There are editable regions in the page as it has been
working for the past
> year and a half. I find that after an amount of editing
by Contribute
> users, the pages do tend to fall apart.
Normal template files have two editable regions in the head
of the page -
doctitle, and head
The one you linked does not.
That's what I was talking about.
> Contribute sounds a great thing, but is a huge pain and
ends up costing me
> money fixing the messes my clients end up making, though
this should not
> be possible...
I have stopped recommending it to my clients.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Ellie" <[email protected]> wrote in message
news:[email protected]...
> Thanks Murray,
>
> I see all this.
>
> (I find it strange that it is now like this, as I
understood that th was
> depracated? So I went through and removed them all.)
>
> There are editable regions in the page as it has been
working for the past
> year and a half. I find that after an amount of editing
by Contribute
> users, the pages do tend to fall apart.
>
> I will have to remake the template and remake the page
from that.
>
> Strange thing is it was working perfectly well before.
>
> Thanks for the help, Murray.
>
> Contribute sounds a great thing, but is a huge pain and
ends up costing me
> money fixing the messes my clients end up making, though
this should not
> be possible...
>
> Ellie
>
> Murray *ACE* wrote:
>
>> You have no editable regions in the head of that
page - why is that?
>>
>> As for the display in DW, perhaps it's the 175
validation errors that the
>> W3C validator finds on the page?
>>
>>
http://validator.w3.org/check?verbose=1&uri=http://www.craft-design.ns.ca/mbg_past_shows.h tml
>>
>> Most of these are serious coding problems....
>>
>

One calendar view does not show up when configure calendar overlay in sharepoint 2010

Similar Messages

Maybe you are looking for