One OCS for multiple Company´s ???
Hello,
It´s possible to install multiple "areas" on one OCS? We want to provide a OCS for our customers. They shouldn´t see other caledars or adress-book. Only ther own "area".
KR
Mathias
Hi ,
Yes , We can create one delivery for multiple PO's .
Go to VL10D tcode --> Purchase order tab -- > enter the STO's and press execute
Select the STO's and click on background tab. Then it creates the log
Select the item again and press shift +F4
It will gives the log inforamation for the STO's and select the item and press on documents tab.
It will creates only one Delivery for all the STO's.
Now go to VL02N tcode and enter the delivery number then goto picking tab then enter picking qnty = delivery qnty
then press on " post goods issue "
Now go to MIGO to do the goods reciept then enter all the STO's here and check the item then save .
Only one document will be posted for all the STO's
Regards,
Usha.
Similar Messages
-
One lockbox for multiple company codes
Is it possible to have one lockbox for multiple company codes?
No, I don't think so. Lockbox is 1:1 for a Company Code.
You configure Lockbox for a Company Code.
You can use one of the 2 available Lockbox user exits (not sure which) to write a piece of code that searches invoices against the customer posted to different company codes. You will have to have the intercompany setups.
You may find an OSS notes for intercompany clearing.
Hope this helps! -
How to schedule one report for multiple company code?
How you can schedule reports in BW 3.5? Suppose I need to schedule one report for multiple company code, how can you do that and notify the users? I do not want to send multiple emails to the same user if the report runs for 20 times (for 20 different companies).
points are given for ASAP replies.
Thanks in advance
PeterDear Peter,
Try to restrict the Company Code with those 20 values and schedule.
Regards,
Ramkumar. -
SEPA file – how to create one file for multiple company codes
Dear experts,
My company has multiple company codes and they process automatic payments (F110) for multiple company codes in the same run.
The company wants to generate one SEPA file for all company codes.
In OBPM1 for SEPA format in the section ``Payment medium output devided by level of detail`` I unchecked everything (attached).
OBPM4 for SEPA format is showing `` No separation of payment medium output``.
Unfortunately, when I run automatic payments (F110) for multiple codes, multiple files for each company code are created.
Can anyone let me know how it is possible to create one SEPA file that will contain payments for multiple company codes?
Thank youHi Zara,
Please check in transaction DMEE your format tree (eg. SEPA_CT), 'DMEE tree: properties' - tab 'Sort/key field'. Is the Sort/key field 'ZBUKR' defined there with Level 1?
Please follow the recommendation of note http://service.sap.com/sap/support/notes/1742584
Regards,
Emöke -
One PO for multiple company code
Hi,
I have one scenario, we have two company code X and Y, now we want to purchase the UPS qty 1 and Battery qty 10, which will use by both the company now can we create one PO for both compnay code on the vendor and the Cost should be divide between both the company code , and how to do the further Finance process like invocie verification giveinng payment to vendor etc.
regards,
zafarHi,
I have one scenario, we have two company code X and Y, now we want to purchase the UPS qty 1 and Battery qty 10, which will use by both the company now can we create one PO for both compnay code on the vendor and the Cost should be divide between both the company code , and how to do the further Finance process like invocie verification giveinng payment to vendor etc.
Hi Zafar
What I think is that you cannot make one PO for two company codes. Yes you can make two different PO for two company codes.
As per the cosrt conern in a PO you can further divide it to as per Distribution i.e. Single account assignment, distribution on Qty & Distribution on %age and than you can define different-2 Cost centres and than invoice them as per rules.
Please tell me if any doubt in this.
Regards
SS -
One lockbox for multiple company code
Hi Guru's.
Currently we have one company code to many lockbox configured, process
is working fine.
We are in process of merging two companies.
We have a scenario were we have one Lockbox shared between multiple
company code, when we process the lockbox file lockbox process will
clear one company code Invoice and other Invoice for different company
code are unprocessed.
We have looked in to user exit EXIT_RFEBLB20_001 and EXIT_RFEBLB20_002,
was not much of help.
Regards,
KJI had this scenario few years back in a company and we used exit RFEBLB20_002. We used logic to find the invoicing company code from the BSID table using the document number from lockbox file, then change the default lockbox company code to invoicing company code. Unfortunately this scenario will work only if you use unique document number ranges for each company codes which is not the case for most companies.
Edited by: PaulKr on Sep 26, 2011 9:08 PM -
One TPV for multiple Countries
Hi Experts,
Could you pls share experirnce/knowledge around having one TPV for multiple countries together. The scenario is like below:
1. There are mutiple Countries in Central America which are small islands for whom we need to roll out the Travel and Expense Solution.
2. The Company code is only one which contains employees from all these Countries.
Could you tell us how can we do the setup. Should we create one TPV at the company code level. OR should we rather use some other criteria for selecting the TPV maybe at the Personnel area or Personnel Sub Area level.
Your help is much appreciated.
Regards,
VijayHi Kiron,
These things I am aware about too. My real question is if I create only one TPV for the company code and assign the Country of the Company code then what issues would this cause. To name a few pls see below.
1) The domestic Country would always be the Company code Country so would be treated as Domestic Country and show on the Form also as domestic Country even for the employees who are from other Countries.
2) There are setting which SAP allows differently for Domestic and International like per diem, miles cumulations. So these necessarily have to be kept as same even though local laws are different in all these countries as Domestic is only the Company code Country.
So I need detailed analysis of what impact I will have by having only one TPV as against making many TPV like one for each Country by using some other parameter like Personnel area/Personnel sub area etc.
Appreciate your help!
Regards,
Vijay -
Entry Channel setup for multiple company codes
Hello,
I have a question regarding the entry channel setup (for external requirements in the Plan-Driven Procurement scenario)
In previous implementations, I 've created an entry channel below each company code (as the documentation says it should be). Now, for each entry channel, there was a EBP user assigned, which corresponded to an RFC entry in the backend system (I was connecting EBP to multiple backend systems)
Now, what should I do in the following scenario?:
1. SRM is only connected to one backend system
2. There are 50 company codes
Does that mean I have to create 50 users (for each channel) plus 50 RFC connections in the R/3 system (each with a different user in the backend system), pointing to the same SRM system?
I was thinking of creating an Org iD in the SRM structure at the top (which would be the entry channel), assign only ONE user to it and then fill attribute BUK with all the company codes. However, I don't know if this will work, because the external requirement process might need the company code defined in the "Function" tab... =/
Any help would be greatly appreciated.
Regards,
Gilberto.Hi Proyecto Genesis,
I am also configuring the Entry channel (org unit) for multiple company codes.
I tried your logic of defining the entry channel outside company code level. Assigned the BUK attribute and extended attribute for plants and storage locations.
Also in my case the local Pur org and Pur group is defined outside the company code. Is it correct?
However the system fails to transfer the external requisition to SRM.
SLG1 displays following error message.
"No address found for partner function type Ship-To Address"
So if I move the Entry channel (org unit) under any one company code level then the external requisitions are transferred correctly to SRM.
But then the issue is the requirements are not transferred with the backend Pur Org and Pur grp. Instead they are transferred to the Pur Org and Pur grp of the company code under which the entry channel is defined.
Can you please share how do we need to define the entry channel, local pur org and pur grp for multiple company codes scenario, so that the ECC requisitions are transferred with the correct company code, pur org and pur grp to SRM?
Or do we need to define Entry channel for each company code and RFC user actually mapping the same backend system?
Please guide.
Regards,
Sandeep -
Can we assign 1 credit control for multiple company codes
hi,
sap gurus,
good afternoon to all
can we assign 1 credit control area for multiple company codes.
if yes can any body explain the pro's and cons of the assignment.
if no can any body explain the why?
its urgent plz.......
regards,
balaji.t
09990019711Yes Balaji,
We can assign.
Here the risk categiry and terms of one credit control area will be applicable to all company code.
Credit Control Area
Definition
An organizational unit that represents the area where customer credit is awarded and monitored.
This organizational unit can either be a single or several company codes, if credit control is
performed across several company codes. One credit control area contains credit control
information for each customer.
Use
Credit and risk management takes place in the credit control area. According to your corporate
requirements, you can implement credit management that is centralized, decentralized, or
somewhere in between.
For example, if your credit management is centralized, you can define one credit control
area for all of your company codes.
If, on the other hand, your credit policy requires decentralized credit management, you
can define credit control areas for each company code or each group of company codes.
Credit limits and credit exposure are managed at both credit control area and customer level.
You set up credit control areas and other data related to credit management in Customizing for
Financial Accounting. For more information, see the Implementation Guide under Enterprise
Structure Definition or Assignment Financial Accounting and then Maintain credit control
area. You assign customers to specific credit control areas and specify the appropriate credit
limits in the customer master record.
Thanks,
Raja -
Contract for multiple company codes
Hi,
The requirement is to process the Sales Contract for multiple company codes, the concern is
while creating the Contract document in VA41 we get the Sales area as mandatory.
How to achieve this? if we suppress or make it as optional with some kind of ABAP customisation (what it should it be? usereixt/VOFM routines or what?) would it solve the problem ? if yes ,what would be the impacts on the other transactions.
Kindly suggest.
Regards
SRHi
If it is a customer contract (SD contracts) then it is not possible to create the document without specifying the sales area. In the overview screen, even if the sales area is not specified, it takes the value from the 'Sold To' customer master record. If the SP exists in multiple sales areas, then the system displays the different sales areas in a popup and we have to select the appropriate one. To my knowledge, even if you manage to create the contract without those details, you cannot refer them for creating the release orders.
Thanks,
Ravi -
Single depreciation run for multiple company codes
Hi experts,
How can I carry out a depreciation run for multiple company codes in one transaction? I thought about creating a variant and running a batch job but you can only select the run for one company code at a time. Am I missing something here. Kindly provide explanation of how this can be done.
Thanks.
BenUse the program RAPOST2010. There is no transaction for this program, but you can create your own if necessary, for example ZAFAB.
Please not that there is a separate forum for asset accounting. -
Can i install itunes multiple times on one computer for multiple users?
Can i install itunes multiple times on one computer for multiple users?
Like most applications you only need to install it once for it to be available to all users. (That said it is possible to install an application and only make it available to the current user, but that's rarely needed.)
tt2 -
How to create one delivery for multiple sales order
Hi!! Friends,
Can some one explain the steps to be followed in creating one delivery for multiple sales order in SAP SD.
Regards
AKASH
Message was edited by:
AKASH TAMBIHi.,
You can combine different orders in to one delivery ,But for the customer Order combination should be checked in the sales area data of the shipping tab,we can combine orders but the ship to party,Route,Inco terms,Shipping date,shipping point should be same,you can do in T.code VL04 & VL10
REWARD if helpfull
Thanks & Regards
Narayana -
How to create one TO for multiple TRs
Dear All,
how to create one TO for multiple TRs, kindly suggest me
Regards,
baluAs for your question: it is discussed in sAP online help:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f841f24afa11d182b90000e829fbfe/frameset.htm
Sorry I misunderstood your question.
The above mentioned solution won't create one single TO from multiple TR.
Edited by: Csaba Szommer on Aug 11, 2010 9:46 AM -
One invoice for multiple deliveries
Hi Gurus,
Can any one tell how can i create one invoice for multiple deliveries.
Regards,
Vinodone invoice for multiple delivers we can do in vf04
we can do in vf04
reward points if it is help ful
Thanks
mubeen
Edited by: mahammad mubeen on Mar 5, 2008 10:02 AM
Maybe you are looking for
-
Is this the only way to capture?
Hello I have a few good quality VHS (C) tapes to edit through Elements 11, so I have put one of them in my Toshiba VCR and clicked 'Play'. I was hoping to bypass the software that came on a disk with the various cables that connect the VCR to my Win
-
Change the value of a field in a form when the form is displayed
Hello I have a report which has a link to a form for updating the records. I have used a link to the form from report which displays the the record to be updated i.e it gets default values from the report. I need to change one of these values at the
-
How to find a report output - URGENT
Hi all, We have an ABAP program and its basically a report, how can I see the output of the report ie the list. Please let me know thanks Sabrina.
-
Hi Experts, Pls. let me know that, How to fetch the SAP Standard Prog. built internal table into my_z_prog.? For more explannation, pls. see my other thread with name of yestrday, SUBMIT RFGLBALANCE WITH selection criteria, then How to get resulted i
-
Hello All,' I have come across some strange issue in all ME2* reports when I am checking the service POs. Few of the service POs are showing zero quantity for still to be delivered & invoiced when the service entry sheet is yet to be created & invoic