"one or more ADRMS role services could not be configured: AD RMS setup failed because of invalid configuraion setting"

HI,
when I configure AD RMS configuration it gives me error that "one or more ADRMS role services could not be configured: AD RMS setup failed because of invalid configuraion setting". The user which I try to install is an administrator of DC and
also the service account is a member of enterprise domain group. When I tried this on test environment it works perfectly but on production environment it didn't. pls help me with this....
Thanks......
I am using windows 2012 standard Server..

HI Eddie,
Thanks for reply.. Pls find the debug log below... It says " Message: The 'http://tempuri.org/RMProvisionSettingsSchema.xsd:Domain' element is invalid - The value 'D' is invalid according to its datatype 'http://tempuri.org/RMProvisionSettingsSchema.xsd:WindowsDomainName'
- The actual length is less than the MinLength value. "
00000706 56.78187180
[11964] CallStack:Microsoft.RightsManagementServices.Configuration.HelperMethods.IsValidConfigSetting
00000707 56.78187180
[11964] System.Xml.Schema.XmlSchemaValidationException
00000708 56.78187180
[11964] Message: The 'http://tempuri.org/RMProvisionSettingsSchema.xsd:Domain' element is invalid - The value 'D' is invalid according to its datatype 'http://tempuri.org/RMProvisionSettingsSchema.xsd:WindowsDomainName' -
The actual length is less than the MinLength value.
00000709 56.78187180
[11964] StackTrace: at Microsoft.RightsManagementServices.Configuration.HelperMethods.ProvisionSchemaValidationEventHandler(Object sender, ValidationEventArgs e)
00000710 56.78187180
[11964] at System.Xml.Schema.XmlSchemaValidator.CheckElementValue(String stringValue)
00000711 56.78187180
[11964] at System.Xml.Schema.XmlSchemaValidator.ValidateAtomicValue(String stringValue, XmlSchemaSimpleType& memberType)
00000712 56.78187180
[11964] at System.Xml.Schema.XmlSchemaValidator.InternalValidateEndElement(XmlSchemaInfo schemaInfo, Object typedValue)
00000713 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateElement()
00000714 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
00000715 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateElement()
00000716 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
00000717 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateElement()
00000718 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
00000719 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateElement()
00000720 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
00000721 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateElement()
00000722 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
00000723 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
00000724 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.Validate(XmlNode nodeToValidate)
00000725 56.78187180
[11964] at System.Xml.XmlDocument.Validate(ValidationEventHandler validationEventHandler, XmlNode nodeToValidate)
00000726 56.78187180
[11964] at Microsoft.RightsManagementServices.Configuration.HelperMethods.IsValidConfigSetting(ConfigOperationType configOperation)
00000727 56.78187180
[11964]
00000728 56.78199768
[11964] -Microsoft.RightsManagementServices.Configuration.Commands.InstallADRMS.ProcessRecord
00000729 56.84855270
[11964] +Microsoft.RightsManagementServices.Configuration.DeploymentPSProvider.RemoveDrive
00000730 56.84864807
[11964] -Microsoft.RightsManagementServices.Configuration.DeploymentPSProvider.RemoveDrive
00000731 56.86203766
[23784] +[Tier2Diagnostic]
00000732 56.86203766
[23784] CallStack:System.Windows.Threading.ExceptionWrapper.InternalRealCall
00000733 56.86203766
[23784] Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.RemotingException
00000734 56.86203766
[23784] Message: AD RMS setup failed because of invalid configuration settings.
00000735 56.86203766
[23784] StackTrace: at Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.WorkflowExecutor.ExecuteCommand(Command workflowCommand, EventHandler`1 outputEventsHandler, EventHandler`1 progressEventHandler,
EventHandler`1 finishedEventHandler, EventHandler`1 warningEventHandler, EventHandler`1 errorEventHandler)
00000736 56.86203766
[23784] at Microsoft.RightsManagementServices.Deployment.M3PPowerShellEngine.ExecuteCommand(CmdletProperties propertyBag, EventHandler`1 outputHandler, EventHandler`1 progressStatusHandler, EventHandler`1 progressPercentageHandler, EventHandler`1
warningHandler, EventHandler`1 errorHandler)
00000737 56.86203766
[23784] at Microsoft.RightsManagementServices.Deployment.AbstractPowerShellProvider.<>c__DisplayClass3`1.<ExecuteAsynchronously>b__0(Object sender, DoWorkEventArgs eventArgs)
00000738 56.86203766
[23784] at Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker.OnDoWork(DoWorkEventArgs e)
00000739 56.86203766
[23784] at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
00000740 56.86203766
[23784] + System.Management.Automation.RemoteException
00000741 56.86203766
[23784] + Message: AD RMS setup failed because of invalid configuration settings.
00000742 56.86203766
[23784] + StackTrace:
00000743 56.86203766
[23784]
00000744 56.86225891
[23784] +[Tier2Diagnostic] One or more AD RMS role services could not be configured:
00000745 56.86225891
[23784] CallStack:Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker`1+<>c__DisplayClass1.<Run>b__0
00000746 56.86225891
[23784] Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.RemotingException
00000747 56.86225891
[23784] Message: AD RMS setup failed because of invalid configuration settings.
00000748 56.86225891
[23784] StackTrace: at Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.WorkflowExecutor.ExecuteCommand(Command workflowCommand, EventHandler`1 outputEventsHandler, EventHandler`1 progressEventHandler,
EventHandler`1 finishedEventHandler, EventHandler`1 warningEventHandler, EventHandler`1 errorEventHandler)
00000749 56.86225891
[23784] at Microsoft.RightsManagementServices.Deployment.M3PPowerShellEngine.ExecuteCommand(CmdletProperties propertyBag, EventHandler`1 outputHandler, EventHandler`1 progressStatusHandler, EventHandler`1 progressPercentageHandler, EventHandler`1
warningHandler, EventHandler`1 errorHandler)
00000750 56.86225891
[23784] at Microsoft.RightsManagementServices.Deployment.AbstractPowerShellProvider.<>c__DisplayClass3`1.<ExecuteAsynchronously>b__0(Object sender, DoWorkEventArgs eventArgs)
00000751 56.86225891
[23784] at Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker.OnDoWork(DoWorkEventArgs e)
00000752 56.86225891
[23784] at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
00000753 56.86225891
[23784] + System.Management.Automation.RemoteException
00000754 56.86225891
[23784] + Message: AD RMS setup failed because of invalid configuration settings.
00000755 56.86225891
[23784] + StackTrace:
00000756 56.86225891
[23784]
00000757 56.86357880
[23784] PageLeave: Progress
00000758 56.86389160
[23784] ErrorNotification: <null>
00000759 56.86653519
[23784] PageEnter: Results
00000760 56.89128876
[23784] +[Tier2Diagnostic] One or more AD RMS role services could not be configured:
00000761 56.89128876
[23784] CallStack:Microsoft.RightsManagementServices.Deployment.ViewModel.ResultsPageViewModel.SetUpResultDetails
00000762 56.89128876
[23784] System.Management.Automation.ApplicationFailedException
00000763 56.89128876
[23784] Message: One or more AD RMS role services could not be configured:
00000764 56.89128876
[23784] StackTrace:
00000765 56.89128876
[23784] + Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.RemotingException
00000766 56.89128876
[23784] + Message: AD RMS setup failed because of invalid configuration settings.
00000767 56.89128876
[23784] + StackTrace: at Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.WorkflowExecutor.ExecuteCommand(Command workflowCommand, EventHandler`1 outputEventsHandler, EventHandler`1 progressEventHandler,
EventHandler`1 finishedEventHandler, EventHandler`1 warningEventHandler, EventHandler`1 errorEventHandler)
00000768 56.89128876
[23784] at Microsoft.RightsManagementServices.Deployment.M3PPowerShellEngine.ExecuteCommand(CmdletProperties propertyBag, EventHandler`1 outputHandler, EventHandler`1 progressStatusHandler, EventHandler`1 progressPercentageHandler, EventHandler`1
warningHandler, EventHandler`1 errorHandler)
00000769 56.89128876
[23784] at Microsoft.RightsManagementServices.Deployment.AbstractPowerShellProvider.<>c__DisplayClass3`1.<ExecuteAsynchronously>b__0(Object sender, DoWorkEventArgs eventArgs)
00000770 56.89128876
[23784] at Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker.OnDoWork(DoWorkEventArgs e)
00000771 56.89128876
[23784] at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
00000772 56.89128876
[23784] + System.Management.Automation.RemoteException
00000773 56.89128876
[23784] + Message: AD RMS setup failed because of invalid configuration settings.
00000774 56.89128876
[23784] + StackTrace:
00000775 56.89128876
[23784]
00000776 56.89152908
[23784] +[Tier2Diagnostic] OnOperationError
00000777 56.89152908
[23784] CallStack:Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker`1+<>c__DisplayClass1.<Run>b__0
00000778 56.89152908
[23784] System.Management.Automation.ApplicationFailedException
00000779 56.89152908
[23784] Message: One or more AD RMS role services could not be configured:
00000780 56.89152908
[23784] StackTrace:
00000781 56.89152908
[23784] + Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.RemotingException
00000782 56.89152908
[23784] + Message: AD RMS setup failed because of invalid configuration settings.
00000783 56.89152908
[23784] + StackTrace: at Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.WorkflowExecutor.ExecuteCommand(Command workflowCommand, EventHandler`1 outputEventsHandler, EventHandler`1 progressEventHandler,
EventHandler`1 finishedEventHandler, EventHandler`1 warningEventHandler, EventHandler`1 errorEventHandler)
00000784 56.89152908
[23784] at Microsoft.RightsManagementServices.Deployment.M3PPowerShellEngine.ExecuteCommand(CmdletProperties propertyBag, EventHandler`1 outputHandler, EventHandler`1 progressStatusHandler, EventHandler`1 progressPercentageHandler, EventHandler`1
warningHandler, EventHandler`1 errorHandler)
00000785 56.89152908
[23784] at Microsoft.RightsManagementServices.Deployment.AbstractPowerShellProvider.<>c__DisplayClass3`1.<ExecuteAsynchronously>b__0(Object sender, DoWorkEventArgs eventArgs)
00000786 56.89152908
[23784] at Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker.OnDoWork(DoWorkEventArgs e)
00000787 56.89152908
[23784] at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
00000788 56.89152908
[23784] + System.Management.Automation.RemoteException
00000789 56.89152908
[23784] + Message: AD RMS setup failed because of invalid configuration settings.
00000790 56.89152908
[23784] + StackTrace:
00000791 56.89152908
[23784]

Similar Messages

Approval Center Error: One or more categories of approval could not be loaded

Hi Team,
We are using EPM 2013 version , recently one of our user encountered a problem with Approval Center while accepting task updates, on the Default welcome page he has 112 Pending approvals but while clicking Approval center he getting error as "Error:
One or more categories of approval could not be loaded when user wants to approve" We have checked on the following possibilites but still we are facing this issue Kindly help us on this
1. I have checked user permission He has Project Manager Access and Timehseet Approval Access
2.While changing the task ownership to another PM and the task is reflecting correcly on the new PM's Approval center while reverting back the task owneership he faces same issue.
3. He is trying for the task updates, we have tried re sving user profiles but nothing changed issue still occours
4. Checked on the ULS Log And find the error
Permission denied: User i:0#.w|enterprise\User01
does not have global permission 'ManageServerConfiguration'.
Please revert for any other information required.
Thank you
Senthil Gopi
Thanks and Regards, Senthil Gopi

Hi,
This is a known bug.
You can find a workaround here:
http://www.msprojectnow.com/Blog/tabid/142/entryid/828/Project-Server-2013-Error-loading-Approval-Page.aspx
Regards,
Philip
Verlinden Philip

Error: One or more categories of approval could not be loaded when user wants to approve

Two of my PM's are getting the error shown in the title of this post (Error: One or more categories of approval could not be loaded when user wants to approve).    The "Related Topic" issues a work around of using the rules to "automatically approve the
offending items".   This did not work for us.   Has anyone else experienced this issue?
Thanks,
~RK

Hi Marc - Per ytour request:
The PM does the following:
1. Access PWA Home page and review messages
2. Clicks on “You have 1 timesheet from resources pending your approval” message
3. Approval Center Page loaded with “Error: One or more categories of approval could not be loaded” and “There are no new approvals to review at this time. If you have published your plan and
still do not see approvals, have your resources submit updates from “Tasks” of “Timesheet”” messages.
We've made certain the Schedule is published and the timesheet was submitted correctly.
Expected behavior: Timesheet records should be available for review and approval.   Instead, the PM gets the screen below with the error message

Project 2013: Error: One or more categories of approval could not be loaded

We recently upgraded to 2013 from 2007. Now some of my Resource mgrs who are also PM's are getting this message on the approval screen:
Error: One or more categories of approval could not be loaded
I figured out it's the timesheets that are not displaying, but even deleting and resubmitting them does not change the message. Has anyone else encountered this issue? It seems to be related to the security, but I haven't figured out which permission
is missing.

Hi there,
This is a
currently unfixed known bug with Project Server 2013 at least up until Oct 2013 CU caused when PM's delete tasks/assignments after the task has already been added to a user's timesheet.
You could turn off single entry to make this go away - but many people actually rely on actuals from timesheets coming through to their projects.
The other way to fix this (temporarily) is to delete and re-create the affected timesheets.
When you navigate to the approval center and receive the "Error: One or more categories of approval could not be loaded" message, check the ULS log you will see a message like this:
Node Consistency Error: Exception loading Assignment. Uid=6c5a411f-1f80-e211-a2cb-001e37e5967d
Selecting from the database with this Uid will tell you which user's timesheet is corrupt.
Personally I use a SQL script like this:
SELECT
ts.TimesheetName,
tsr.ResourceName,
tspe.PeriodName
,tsp.ProjectName,
tst.TaskName
FROM
[ProjectServer].[dbo].[MSP_TimesheetLine]
tsl
inner join
MSP_Timesheet ts
on tsl.TimesheetUID
= ts.TimesheetUID
inner join
MSP_TimesheetResource tsr
on ts.OwnerResourceNameUID
= tsr.ResourceNameUID
inner join
MSP_TimesheetProject tsp
on tsl.ProjectNameUID
= tsp.ProjectNameUID
inner join
MSP_TimesheetStatus tss
on ts.TimesheetStatusID
= tss.TimesheetStatusID
inner join
MSP_TimesheetTask tst
on tsl.TaskNameUID
= tst.TaskNameUID
inner join
MSP_TimesheetPeriod tspe
on ts.PeriodUID
= tspe.PeriodUID
inner join
[ProjectServer].[pub].[MSP_TIMESHEETS]
pubTs
on pubTs.TS_UID
= ts.TimesheetUID
where
tsl.AssignmentUID
= '6c5a411f-1f80-e211-a2cb-001e37e5967d'
and pubTs.TS_STATUS_ENUM
= 1
I then create a delegate as that user - go and take a screenshot of the timesheet, delete it, and recreate it.
Undelegate, go back to the approval center, if the error is still there, then look at the ULS log, rinse and repeat.
(As you can tell - this is part of my weekly routine)
Cheers,
James.
James Boman - http://www.boman.biz Software Consultant for IPMO - http://www.ipmo.com.au

Error: One or more categories of approval could not be loaded

On the Approvals page I'm getting the following message: "Error: One or more categories of approval could not be loaded". I'm able to approve/reject work and new tasks as normal, but the message just won't go away.
As one of the threads suggested, I tried creating a new rule to auto accept and publish, but that didn't do anything. Is there a way to fix this or reset the page? Thanks for any help...

Go to Server Setting
-> Administrative Task
Change Approval to “NO” for all Admin tasks
By delegating user delete and resubmit timesheet. Now verify it in Approval Center... Revert back the Administrative time setting...
If issue still persists, You can try to change Status manager, By dedicating user delete and resubmit timesheet. Now verify it in Approval Center of new Status Manager. Revert back the status manager.
Hope this will help you.
Raushan Kumar |
LinkedIn
Please click Mark As Answer if this post solves your problem or Vote As Helpful if a post is useful to you. This will be useful to other community members following
the thread.

I can't Start, Uninstall or Install new iTunes. I'm getting the same error message: Window Installer Service could not be accessed. No other programs have similar problem. Any suggestion what can be done?

I can't Start, Uninstall of Install new iTunes. I'm getting the same error message: "Window Installer Service could not be accessed". No other programs having similar problem. Any suggestions how to fix it?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Certificate issues Active Directory Certificate Services could not process request 3699 due to an error: The revocation function was unable to check revocation because the revocation server was offline. 0x80092013

Hi,
We have some problems with our Root CA. I can se a lot of failed requests. with the event id 22: in the logs. The description is: Active Directory Certificate Services could not process request 3686 due to an error: The revocation function was unable to
check revocation because the revocation server was offline. 0x80092013 (-2146885613). The request was for CN=xxxxx.ourdomain.com. Additional information: Error Verifying Request Signature or Signing Certificate
A couple of months ago we decomissioned one of our old 2003 DCs and it looks like this server might have had something to do with the CA structure but I am not sure whether this was in use or not since I could find the role but I wasn't able to see any existing
configuration.
Let's say that this server was previously responsible for the certificates and was the server that should have revoked the old certs, what can I do know to try and correct the problem?
Thank you for your help
//Cris

hello,
let me recap first:
you see these errors on a ROOT CA. so it seems like the ROOT CA is also operating as an ISSUING CA. Some clients try to issue a new certificate from the ROOT CA and this fails with your error mentioned.
do you say that you had a PREVIOUS CA which you decomissioned, and you now have a brand NEW CA, that was built as a clean install? When you decommissioned the PREVIOUS CA, that was your design decision to don't bother with the current certificates that it
issued and which are still valid, right?
The error says, that the REQUEST signature cannot be validated. REQUESTs are signed either by itself (self-signed) or if they are renewal requests, they would be signed with the previous certificate which the client tries to renew. The self-signed REQUESTs
do not contain CRL paths at all.
So this implies to me as these requests that are failing are renewal requests. Renewal requests would contain CRL paths of the previous certificates that are nearing their expiration.
As there are many such REQUEST and failures, it probably means that the clients use AUTOENROLLMENT, which tries to renew their current, but shortly expiring, certificates during (by default) their last 6 weeks of lifetime.
As you decommissioned your PREVIOUS CA, it does not issue CRL anymore and the current certificates cannot be checked for validity.
Thus, if the renewal tries to renew them by using the NEW CA, your NEW CA cannot validate CRL of the PREVIOUS CA and will not issue new certificates.
But it would not issue new certificates anyway even if it was able to verify the PREVIOUS CA's CRL, as it seems your NEW CA is completely brand new, without being restored from the PREVIOUS CA's database. Right?
So simply don't bother :-) As long as it was your design to decommission the PREVIOUS CA without bothering with its already issued certificates.
The current certificates which autoenrollment tries to renew cannot be checked for validity. They will also slowly expire over the next 6 weeks or so. After that, autoenrollment will ask your NEW CA to issue a brand new certificate without trying to renew.
Just a clean self-signed REQUEST.
That will succeed.
You can also verify this by trying to issue a certificate on an affected machine manually from Certificates MMC.
ondrej.

SCOM 2012 Data Access Service could not start

Hello,
I have 3 SCOM 2012 servers. I got the error that the All Managament Server Pool is not available. Google search give me a lot of posts to add folder PoolManager at HKLM\System\CurrontControlSet\services\HealthService\Parameters with the DWORD keys PoolLeaseRequestPeriodSeconds
600 and PoolNetworkLatencySeconds 120. After restarting last SCOM server the Data Access Service could not run "Windows could not start the System Center Data Access Service. Error 1053: The service did not respond to the start or control request in a
timely fashion"
At Operations Manager Eventlog I see an error: "OpsMgr Management Configuration Service failed to communicate with System Center Data Access Service due the following exception: System.Runtime.Remoting.RemotingException: Unable to get ISdkService interface.
Please make sure local Sdk Service is running."
At System Eventlog I see an error: "A timeout was reached (30000 milliseconds) while waiting for the System Center Data Access Service service to connect."
Why did it run on the both other servers and failes on the third one? What can I check?
Regards, Doreen

Hi,
According to my understanding, after editing the registry key value, two of three management servers work fine now, and the issue only occur to the third one. Whether all those servers are running with Windows server 2012?
I would like to suggest you re-check the service account for the data access service, maybe we can re-enter the account credential. Those three servers may use the same account for the service, make sure the account is not disabled and you enter in the right
password for it.
Here is a similar thread, please go through it for more details:
http://social.technet.microsoft.com/Forums/en-US/f2281934-513d-4b60-bb4b-34ae8a892ace/failed-to-open-the-console-and-system-center-data-access-service-wont-start-scom-2012?forum=operationsmanagergeneral
In addition, please also restart the third server and check the result, and I know that there is a similar error message in SCOM 2007:
http://blogs.technet.com/b/csstwplatform/archive/2012/01/02/scom-2007-r2-unable-to-open-the-scom-console-after-server-reboot-the-sdk-service-is-stopped.aspx
Regards,
Yan Li
Regards, Yan Li

The Fibre Channel Platform Registration Service could not register the platform with fabric

Hyper-V Cluster. HP StorageWorks 82E 8 Gb PCI-e Dual Port FC HBA.
Each 15 minutes, eventlog register a warning.
EventID: 2 Source:2
The Fibre Channel Platform Registration Service could not register the platform with fabric 10:00:00:05:1e:7f:74:7b.
I have teste the service. And it's started. Cluster storage validation report without failure.
Someone suggest any idea.
Thanks.

Hi,
What’s the OS version of your cluster node?
The Microsoft Fibre Channel Platform Registration Service registers the platform with all available Fibre Channel fabrics and maintains the registrations. A fabric is a network topology where devices are connected to each other
through one or more high-efficiency data paths. This service is used in support of storage area networks.
This service is installed by default on Windows Server 2008, and the service startup type is Manual.
You may try hotfix in KB 978790, and check the result.
For more information please refer to following MS articles:
The File Share Witness resource is in a failed state even though the File Share Witness directory is available, and quorum cannot be maintained in a Windows Server 2008 failover cluster
http://support.microsoft.com/kb/978790
cluster resources unresponsive
http://social.technet.microsoft.com/Forums/hu/winserverClustering/thread/886a9cb3-7723-4b64-8c15-602dadf5ced9
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

SOAP service could not be loaded: premature end of file

Hi,
I am trying to call some web services using the Web Service action in the logic editor, but I am always getting some errors. For instance, for an online service (e.g. http://webservices.imacination.com/distance/Distance.jws) I am getting:
"SOAP service could not be loaded: Premature end of file."
I've tried 3 different web services that are available out there, and no result. I've laso tried writing it like this:
http://webservices.imacination.com/distance/Distance.jws/ or
http://webservices.imacination.com/distance/Distance.jws?wsdl
, but the result was the same.
I've also tried a web service that's currently deployed on my machine, using Tomcat. Here, I'm getting some slightly different errors:
http://localhost:8080/epcis-repository-0.2.0/capture/
SOAP service could not be loaded: the element type "HR" must be terminated by the matching end-tag "</hr>"
http://localhost:8080/epcis-repository-0.2.0/capture or
http://localhost:8080/epcis-repository-0.2.0/capture?wsdl
SOAP service could not be loaded: WSDLEXception (at /html): faultCode=INVALID_WSDL: Expected element 'definitions'.
As a note, this web service that I have deployed locally is also available online (http://demo.accada.org/epcis/capture), and if I try out this one, the error is again:
SOAP service could not be loaded: Premature end of file.
As far as I could tell, the /epcis/capture webservice is document/literal, so I don't think this should be a problem. I have read other posts about people having similar problems, but I could not find the answer to my problem...
Can anyone please help?
Thanks in advance!
Angela

Hi,
Thanks a lot, everyone, for your answers! Yes, the firewall and the "rpc/encoded" encoding might explain why the first two web services did not work...
However, it does not explain why the web service installed locally does not work, since it is "document/literal" encoded, as far as I could tell..... And unfortunately, this one is the one that I need to connect to (the others I was only using for testing). Again, this is the error message that I get:
SOAP service could not be loaded: WSDLEXception (at /html): faultCode=INVALID_WSDL: Expected element definitions'.
Parts of the wsdl file are copied bellow, and I can't see anything wrong with it (certainly no <definitions/> missing):
<?xml version="1.0" encoding="UTF-8"?>

<wsdl:definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:epcis="urn:epcglobal:epcis:xsd:1" xmlns:epcisq="urn:epcglobal:epcis-query:xsd:1" xmlns:epcglobal="urn:epcglobal:xsd:1" xmlns:impl="urn:epcglobal:epcis:wsdl:1" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" targetNamespace="urn:epcglobal:epcis:wsdl:1">
<wsdl:binding name="EPCISServiceBinding" type="impl:EPCISServicePortType">
    <wsdlsoap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
    <wsdl:operation name="getQueryNames">
      <wsdlsoap:operation/>
      <wsdl:input>
        <wsdlsoap:body use="literal"/>
      </wsdl:input>
      <wsdl:output>
        <wsdlsoap:body use="literal"/>
      </wsdl:output>
    </wsdl:operation>
</wsdl:binding>
</wsdl:definitions>
As a side note, I now get the same error message if I try to connect from outside the company's firewall to the same web service available on the internet (http://demo.accada.org/epcis/capture?wsdl).
Does anyone have any more ideas?
Thank you once again in advance!
Angela

One of the specified disk images could not be opened

I cannot believe how instable my system is. I switched to Mac to get a reliable system, but I cannot do without Windows entirely, hence my heavy use of VPC.
Today I got the small grey screen "You need to restart your computer". I was running VPC at the time. All apps were closed except Windows Explorer (the file system). The cause was merely unplugging my broadband connection. Wow!
On rebooting VPC I got:
"One of the specified disk images could not be opened. The disk image file is not the correct file type or uses a file format that is unsupported by this version of Virtual PC."
I "detached" my "drives" 2+3, which were pointing to my Drive2.vhdp and Drive3.vhdp data "drives" and tried again. No luck.
Drive 1 was pointing to Disk1.vhdp, which is a part of my Windows 2000.vpc package. I don't believe that it was pointing there before the crash.
# side note #
(The Windows 2000.vpc package is an old installation that I don't use but have not deleted. I currently use one called: "Windows 2000 copy 1-011105") which might or might not be a copy of "Windows 2000.vpc." I've had so many problems, it's hard to say.
I then tried and successfully detached the Disk1.vhdp and received a warning:
"The hard drive data previously used by Drive 1 is no longer contained in this PC document. The data has been moved to a separate Virtual Hard Drive Document "Windows 2000 copy 1-011105 Disk1.vhdp".
On examining the above package I find:
BaseDrive.vhd 14.45GB (size about right) dated last night when I last closed VPC
MainPackageFile Alias
UndoDrive1.vud dated at the time of the problems.
On examining my "Windows 2000 copy 1-011105.vpc7 I find:
Configuration.plist
IconCache
MainPackageFile Alias
StartMenu.plist
Do you have a suggestion as to how I can rescue my above mentioned BaseDrive.vhd please? This is more recent than my last back-up.
Many thanks in advance.

Problem solved.

Windows vista home premium service pack 2.error measage __(the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance )no error nurber

windows vista home premium service pack 2。error measage __（the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance ）no error nurber

Hi Abdallah,
According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted. I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
then reinstall SQL Server 2008 R2. For more details, please review this similar
article.
Thanks,
Lydia Zhang

ERROR: The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.

Hello Everyone,
I keep getting this when trying to install 0r repair SQL Server 2008 R2 on a SBS 2011 Standard.
TITLE: Microsoft SQL Server 2008 R2 Setup
The following error has occurred:
The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDF039760%25401201%25401
BUTTONS:
OK
the provided link says "There is no additional information about this issue" i am helpless
please tell assist.
Thanks.
Abdallah.M.M

Hi Abdallah,
According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted. I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
then reinstall SQL Server 2008 R2. For more details, please review this similar
article.
Thanks,
Lydia Zhang

The Autodiscover service could not be located

I am developing small EWS client. For initial testing I wrote simple code:
service = new ExchangeService(ExchangeVersion.Exchange2007_SP1);
service.Credentials = new WebCredentials("[email protected]", "password");
service.TraceEnabled = true;
ServicePointManager.ServerCertificateValidationCallback = CertificateValidationCallBack;
service.AutodiscoverUrl("[email protected]");
I included CertificateValidationCallBack method from
this MSDN page.
I have two Exchange servers. For one exchange server this code worked fine for sending a new email.
However on another server I got following exception:
The Autodiscover service could not be located
at Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService.InternalGetLegacyUserSettings[TSettings](String emailAddress, List`1 redirectionEmailAddresses, Int32& currentHop)
at Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService.GetLegacyUserSettings[TSettings](String emailAddress)
at Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService.InternalGetLegacyUserSettings(String emailAddress, List`1 requestedSettings)
at Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService.GetUserSettings(String userSmtpAddress, UserSettingName[] userSettingNames)
at Microsoft.Exchange.WebServices.Data.ExchangeService.GetAutodiscoverUrl(String emailAddress, ExchangeVersion requestedServerVersion, AutodiscoverRedirectionUrlValidationCallback validateRedirectionUrlCallback)
at Microsoft.Exchange.WebServices.Data.ExchangeService.AutodiscoverUrl(String emailAddress, AutodiscoverRedirectionUrlValidationCallback validateRedirectionUrlCallback)
at Microsoft.Exchange.WebServices.Data.ExchangeService.AutodiscoverUrl(String emailAddress)
at EwsDctmSyncer.Test.Main(String[] args) in C:\ewswork\csws\EwsTest\EwsExp\Test.cs:line 21
at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)
at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
When I look at the traces on console, I found this main problem:
failed: WebException (The underlying connection was closed: Could not
establish trust relationship for the SSL/TLS secure channel.)
However I dont understand what could be wrong with this second instance of Exchange Server. Can anyone pin point what could be wrong. I am puzzled since to my knowledge both the instances are similarly configured.
Added full trace as a reply to this post.

Full Exchange Service Trace:
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:33Z">
Starting SCP lookup for domainName='domain1.com', root path=''
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:33Z">
Searching for SCP entries in LDAP://CN=Configuration,DC=domain1,DC=com
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:33Z">
Scanning for SCP pointers Domain=domain1.com
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:33Z">
No SCP pointers found for 'Domain=domain1.com' in
configPath='CN=Configuration,D
C=domain1,DC=com'
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:33Z">
Scanning for SCP urls for the current computer Site=Default-First-Site-Name
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:33Z">
Adding (prio 1)
'https://exchangeserver.domain1.com/Autodiscover/Autodiscover.xm
l' for the 'Site=Default-First-Site-Name' from
'LDAP://CN=exchangeserver,CN=Auto
discover,CN=Protocols,CN=exchangeserver,CN=Servers,CN=Exchange
Administrative Group (adminGroup),CN=Administrative Groups,CN=domain1,CN=Microsoft
Exchange,
CN=Services,CN=Configuration,DC=domain1,DC=com' to the top of the list (exact ma
tch)
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:33Z">
Trying to call Autodiscover for [email protected] on
https://exchangeserver.domain1.com/Autodiscover/Autodiscover.xml.
</Trace>
<Trace Tag="AutodiscoverRequestHttpHeaders" Tid="9"
Time="2013-12-16 15:40:33Z">
POST /Autodiscover/Autodiscover.xml HTTP/1.1
Content-Type: text/xml; charset=utf-8
Accept: text/xml
User-Agent: ExchangeServicesClient/15.00.0516.014
</Trace>
<Trace Tag="AutodiscoverRequest" Tid="9" Time="2013-12-16 15:40:33Z" Version="15.00.0516.014">
<Autodiscover
xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/requestschema/2006">
<Request>
<EMailAddress>[email protected]</EMailAddress>
<AcceptableResponseSchema>http://schemas.microsoft.com/exchange/autodiscov
er/outlook/responseschema/2006a</AcceptableResponseSchema>
</Request>
</Autodiscover>
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:46Z">
failed: WebException (The underlying connection was closed: Could not
establish trust relationship for the SSL/TLS secure channel.)
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:46Z">
Trying to call Autodiscover for [email protected] on
https://domain1.com/aut
odiscover/autodiscover.xml.
</Trace>
<Trace Tag="AutodiscoverRequestHttpHeaders" Tid="9"
Time="2013-12-16 15:40:46Z">
POST /autodiscover/autodiscover.xml HTTP/1.1
Content-Type: text/xml; charset=utf-8
Accept: text/xml
User-Agent: ExchangeServicesClient/15.00.0516.014
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
failed: WebException (Unable to connect to the remote server)
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
Trying to call Autodiscover for [email protected] on
https://autodiscover.domain1.com/autodiscover/autodiscover.xml.
</Trace>
<Trace Tag="AutodiscoverRequestHttpHeaders" Tid="9"
Time="2013-12-16 15:40:47Z">
POST /autodiscover/autodiscover.xml HTTP/1.1
Content-Type: text/xml; charset=utf-8
Accept: text/xml
User-Agent: ExchangeServicesClient/15.00.0516.014
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
failed: WebException (The remote name could not be resolved:
'autodiscover.domain1.com')
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
Trying to get Autodiscover redirection URL from
http://autodiscover.domain1.com/
autodiscover/autodiscover.xml.
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
Request error: The remote name could not be resolved:
'autodiscover.domain1.com'
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
No Autodiscover redirection URL was returned.
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
Trying to get Autodiscover host from DNS SRV record for domain1.com.
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
DnsQuery returned error error 'DNS name does not exist' error code 0x0000232B.
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
No appropriate SRV record was found.
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
No matching Autodiscover DNS SRV records were found.
</Trace>

Server 2012 CDP PKI Setup on Subordinate CA - Active Directory Certificate Services could not create an encryption certificate

Hi,
When I check pkiview.msc on my 2012 Subordinate CA I get the error shown in the first picture below. I'm also getting errors similar to below in the event log:
"Active Directory Certificate Services could not create an encryption certificate. Requested by contoso\admin1. The revocation function was unable to check revocation because the revocation server was offline. 0x80092013 (-2146885613 CRYPT_E_REVOCATION_OFFLINE)."
I'm assisting in setting up a 2 tier PKI infrastructure using Windows 2012. The root CA looks good, but we're getting errors on the subordinate. The server was working, but we discovered that the server would only issue certificates with a maximum of a 1
year expiry date - obviously no good, so we decided to run through the following commands on the root CA (as recommended byhttp://www.techieshelp.com/subordinate-ca-increase-certificate-validity/)
certutil -setreg ca\ValidityPeriodunits "Years"
certutil -setreg ca\ValidityPeriod "5"
restarted AD certificate services on the root and subordinate CA.Then did the following on the subordinate CA:
1.On the Subordinate CA create a new CA request by right clicking the server in ADCS and select New Request.
2.Supplied the original request file from the subordinate CA (I couldn't find a way of generating a new request file)
3.Issued the certificate using the Root CA.
4.On the Subordinate CA ADCS installed new CA cert.
However, I keep on getting CDP or AIA errors on my subordinate CA.Also I'm missing a CDP field value when I look at the certificate listed in the personal and trusted certification authority store on my subordinate CA.
In addition, when I look at my CDP locations in Certificate Authority, I see a lot of CDPs, but I'm not sure if I need them all - I suspect I could just get away with LDAP, the C:\windows path and a single http:// path.
I've tried renewing the existing certificate and CRL on my subordinate CA, but that didn't work either.
Please advise.
Thanks

Ok, the process to renew the subordinate CA is incorrect. Once the registry setting to change the validity period was made on the root CA, the root CA ADCS service needs to be restarted. That is the only time those keys are read. Then:
1) On the subordinate CA, open the CA tool, right click the CA and select Renew CA Certificate. You can use the same key, no need to create a new one. It will create a NEW certificate request file
2) Copy that to the Root CA and submit like you would have done during the initial install
3) Approve the request and export the issued certificate
4) On the subordinate CA, in the CA tool, right click the CA and choose Install CA Certificate.
You can not reuse request files.
Mark B. Cooper, President and Founder of PKI Solutions Inc., former Microsoft Senior Engineer and subject matter expert for Microsoft Active Directory Certificate Services (ADCS). Known as “The PKI Guy” at Microsoft for 10 years.

"one or more ADRMS role services could not be configured: AD RMS setup failed because of invalid configuraion setting"

Similar Messages

Maybe you are looking for