One SOAP-SOAP scenario with multiple interfaces

Hi,
I am developing a scenario SOAP-SOAP using PI 7.10 Sp6.
The wsdl has around 8 service interfaces and i am planning to create 8 Outbound and 8 Inbound interfaces for the same mesg type and create a scenario without MM or Operation mapping.
If I plan to use only one Sender CC and only one configuration scenario for this developement, how do I provide my end point in the following format?
http://<host>:<port>/XISOAPAdapter/MessageServlet?senderParty=&senderService=<SEND_BS>&interface=Interface_Out&receiverParty=&receiverService=<RECV_BS>&interfaceNamespace=http://test.com/xi/SAP/
Venkat.

Raj/Pavan,
I added other service interfaces to one service interface in operations.
But the request messages have not appeared because of which it is throwing an exception when I activate the message interface.
I do not have problems on the receiving side, One receiver CC should take care of the problem as we dont specify in the recvr SOAP action attribute.
I am worried about sender side only !
Thanks,
Venkat.
Just now I created a dummy DT, MT and SI and added this to existing even that request message did not show up in the SI.
Edited by: Venkat A on Jun 16, 2010 11:03 AM

Similar Messages

Soap to soap scenario with multiple operations

hi experts,
I want to do a scenario in which I have sender RFC(asynchronous) and receiver SOAP(Synchronous) and response will come back to a file.
Can anyone please help me, how many communication channels are required and how to do configuration.
regards,
vineetha chowdary

> want to do a scenario in which I have sender RFC(asynchronous) and receiver SOAP(Synchronous) and response will come back to a >file.Can anyone please help me, how many communication channels are required and how to do configuration.
RFC (ASYNC) --->SOAP(SYNC) ---> FILE(ASYNC)
You can do this with bpm or without bpm.
Doing WITHOUT BPM is simple. Refer the following [link |http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File%28Without%20BPM%29?bc=true]for handling async sync pattern ...
Follow closely this link .. ONly difference is file (sender) and file receiver are async and RFC is sync. In your case RFC(sender) and FIle(receiver) async and SOAP is sync.

Extended SOAP Scenario with Security

Hi All,
Could anyone send me the step by step procedure for "Extended SOAP Scenario with Security"?
Regards,
Sai.

Hello,
Please use the search option on SDN.
There are no step by step guides as such and you will have to combine multiple different activities to achieve this, including set up of Server SSL on XI and then set up of the SOAP adapter to use the certificates.
Refer to the guides on SDN for these.
Regards
Bhavesh

Execute scenario with multiple variables through ODIInvoke webservice

I am looking to execute scenario with multiple variables through ODIInvoke webservice but can't seem to get the SOAP request formatted correctly. Here is what I have tried but I get a parsing error.
<invokeScenarioRequest>
<invokeScenarioRequest>
<RepositoryConnection>
<JdbcDriver>org.hsqldb.jdbcDriver</JdbcDriver>
<JdbcUrl>jdbc:hsqldb:hsql://localhost</JdbcUrl>
<JdbcUser>sa</JdbcUser>
<OdiUser>SUPERVISOR</OdiUser>
<OdiPassword>SUNOPSIS</OdiPassword>
<WorkRepository>DEVELOPMENT</WorkRepository>
</RepositoryConnection>
<Command>
<ScenName>I_TEST_WS</ScenName>
<ScenVersion>001</ScenVersion>
<Context>DEVELOPMENT</Context>
<LogLevel>5</LogLevel>
<SyncMode>1</SyncMode>
<Variables>
<Name>SNI.DMN_CD</Name>
<Value>DTA</Value>
</Variables>
<Variables>
<Name>SNI.ADPT_CD</Name>
<Value>RAT_CD</Value>
</Variables>
</Command>
<Agent>
<Host>S119SNIP045166</Host>
<Port>20910</Port>
</Agent>
</invokeScenarioRequest>
</invokeScenarioRequest>
Here is the error I am getting
com.sunopsis.wsinvocation.SnpsWSInvocationException: java.lang.RuntimeException: Unexpected subelement Name
     at com.sunopsis.wsinvocation.client.a.a.d.requestReply(d.java)
     at com.sunopsis.graphical.wsclient.f.b(f.java)
     at com.sunopsis.graphical.tools.utils.swingworker.v.call(v.java)
     at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
     at com.sunopsis.graphical.tools.utils.swingworker.l.run(l.java)
     at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
     at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.RuntimeException: Unexpected subelement Name
     at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:222)
     at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:129)
     at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
     at org.apache.crimson.parser.Parser2.maybeElement(Parser2.java:1515)
     at org.apache.crimson.parser.Parser2.content(Parser2.java:1766)
     at org.apache.crimson.parser.Parser2.maybeElement(Parser2.java:1494)
     at org.apache.crimson.parser.Parser2.content(Parser2.java:1766)
     at org.apache.crimson.parser.Parser2.maybeElement(Parser2.java:1494)
     at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:500)
     at org.apache.crimson.parser.Parser2.parse(Parser2.java:305)
     at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:433)
     at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
     at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
     at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
     at org.apache.axis.Message.getSOAPEnvelope(Message.java:435)
     at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62)
     at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
     at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
     at org.apache.axis.client.Call.invoke(Call.java:2767)
     at org.apache.axis.client.Call.invoke(Call.java:1792)
     at com.sunopsis.wsinvocation.client.a.a.d.a(d.java)
     ... 8 more
Caused by:
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Client
faultSubcode:
faultString: java.lang.RuntimeException: Unexpected subelement Name
faultActor:
faultNode:
faultDetail:
     {http://xml.apache.org/axis/}stackTrace:java.lang.RuntimeException: Unexpected subelement Name
     at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:222)
     at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:129)
     at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
     at org.apache.crimson.parser.Parser2.maybeElement(Parser2.java:1515)
     at org.apache.crimson.parser.Parser2.content(Parser2.java:1766)
     at org.apache.crimson.parser.Parser2.maybeElement(Parser2.java:1494)
     at org.apache.crimson.parser.Parser2.content(Parser2.java:1766)
     at org.apache.crimson.parser.Parser2.maybeElement(Parser2.java:1494)
     at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:500)
     at org.apache.crimson.parser.Parser2.parse(Parser2.java:305)
     at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:433)
     at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
     at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
     at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
     at org.apache.axis.Message.getSOAPEnvelope(Message.java:435)
     at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62)
     at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
     at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
     at org.apache.axis.client.Call.invoke(Call.java:2767)
     at org.apache.axis.client.Call.invoke(Call.java:1792)
     at com.sunopsis.wsinvocation.client.a.a.d.a(d.java)
     at com.sunopsis.wsinvocation.client.a.a.d.requestReply(d.java)
     at com.sunopsis.graphical.wsclient.f.b(f.java)
     at com.sunopsis.graphical.tools.utils.swingworker.v.call(v.java)
     at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
     at com.sunopsis.graphical.tools.utils.swingworker.l.run(l.java)
     at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
     at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
     at java.lang.Thread.run(Thread.java:595)
     {http://xml.apache.org/axis/}hostname:S119SNIP045166
java.lang.RuntimeException: Unexpected subelement Name
     at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:222)
     at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:129)
     at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
     at org.apache.crimson.parser.Parser2.maybeElement(Parser2.java:1515)
     at org.apache.crimson.parser.Parser2.content(Parser2.java:1766)
     at org.apache.crimson.parser.Parser2.maybeElement(Parser2.java:1494)
     at org.apache.crimson.parser.Parser2.content(Parser2.java:1766)
     at org.apache.crimson.parser.Parser2.maybeElement(Parser2.java:1494)
     at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:500)
     at org.apache.crimson.parser.Parser2.parse(Parser2.java:305)
     at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:433)
     at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
     at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
     at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
     at org.apache.axis.Message.getSOAPEnvelope(Message.java:435)
     at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62)
     at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
     at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
     at org.apache.axis.client.Call.invoke(Call.java:2767)
     at org.apache.axis.client.Call.invoke(Call.java:1792)
     at com.sunopsis.wsinvocation.client.a.a.d.a(d.java)
     at com.sunopsis.wsinvocation.client.a.a.d.requestReply(d.java)
     at com.sunopsis.graphical.wsclient.f.b(f.java)
     at com.sunopsis.graphical.tools.utils.swingworker.v.call(v.java)
     at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
     at com.sunopsis.graphical.tools.utils.swingworker.l.run(l.java)
     at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
     at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
     at java.lang.Thread.run(Thread.java:595)
If I change it from
<Variables>
<Name>SNI.DMN_CD</Name>
<Value>DTA</Value>
</Variables>
<Variables>
<Name>SNI.ADPT_CD</Name>
<Value>RAT_CD</Value>
</Variables>
to
<Variables>
<Name>SNI.DMN_CD</Name>
<Value>DTA</Value>
</Variables>
the session runs. Does anyone know the syntax for multiple variables being passed?
Thank you,
Troy

Hi,
The xml should be like this
<variables>
<name>SNI.DMN_CD</name>
<value>DTA</value>
<name>SNI.ADPT_CD</name>
<value>RAT_CD</value>
</variables>
Hope this helpful.
Regards

Create ecatt script for one sales order creation with multiple line items

Hi ,
I want to create a ecatt script for one sales order creation with multiple line items. Preferably SAP GUI.
This selection of data will be from an external file/ variants which will have only one row of data in it.
Firstly: I have to sort the external file having same PO Numbers in an order.Group them together.
Second: I have to create sales order for those many line items having same PO Number.
Best Regard
Taranum

Hi Micky
Firstl you should upload the Line items for a particular sales Order in an Internal table
and then pass that internal table to your BAPI during your coding corresponding to a particu;lar sales order
In case of any issues pls revert back
Reward points if helpful
Regards
Hitesh

One material type assign with multiple valuation class

Dear All,
One material type assign with the multiple valuation class.it is possible.what is defuclty for that.
pls, explan.
Regards,
Ranjeet

Hi,
ABC 3040 - spare mach BSX ( G/ L )- Goto OBYC and double click on the transaction key BSX and enter your chart of account proceed
val modifier(0001)-val class 3040--G/L account
XYZ 3041 - spare mach BSX ( G/ L )-Goto OBYC and double click on the transaction key BSX and enter your chart of account proceed
val modifier(0001)-val class 3041--G/L account
ABC 3040 - store consumable GBB ( G/ L )-Goto OBYC and double click on the transaction key GBB nter your chart of account proceed
val modifier(0001)-Account modifier VBR-Valuaiton class 3040-G/L Account(cr)-G/L Account (Dr)
ABC 3040 - repair and maintanance GBB ( G/ L )-Goto OBYC and double click on the transaction key GBB nter your chart of account proceed
val modifier(0001)-Account modifier VBR-Valuaiton class 3041-G/L Account(cr)-G/L Account (Dr)
Regards,
Deepak.

How to Create one TLB Order manually with multiple deployed STR's

Hello,
We are currently facing an issue when trying to make a TLB manually by right clicking on the deployed STR's.
APO generates multiple orders for each item.
Business requirement is to generate one TLB Order.
For example there are 10 Confirmed STR's and the planner wants to choose the deployed STR's manually from the list of 10 products.   When we right cliick and select each product (for either partial or full ) it moves to the TLB order, but generates multiple orders.
Is there a way to restrict the requested lines to be in one Order? So that when the order is CIFed to ECC, there's only one STO generated with multiple lines.
Regards,
Bhavesh

Hi Bhavesh,
               By manual TLB process only you can create stock transfer order with SINGLE line item. because your deployed STRs always will have single line item and you are selection one by one and converting manually. in STD process you can not club items manually...
Yes it can be very much possible by automatic TLB run. it will take all the deployed orders and converting as TLB order by considering TLB profile where min , max limits maintained. also there is concept if you maintain loading group in product master based on that materials will be grouped together.....
Clubbing items into one order is done by TLB heuristics.. but when you do manually you are deciding how to do it?....
You can do one thing... after creation of TLB order with single item..you can edit and include some more items manually. Accordingly you need to delete deployed STRs.......
If you want to automate this then you need to look out for BADI... not sure possible or not
Regards
Thennarasu.M

Loading datastore with multiple interfaces

We want to have multiple interfaces load the same datastore. Each of these processes can run in parallel. The problem we have is when the LKM fires it creates a C$ table with the same name in each interface. Is there a way to prevent this from creating a duplicate name?
Troy

Hi-
Whenever ODI creates a loading table it will add the prefix with the name of C$ with the name of your table name. That is the reason you are getting the table name with more than 30 characters.
Loading table prefix is a mandatory field that should be there in your physical schema definition. So whenever you are creating a table it should not exceed the characters defined in the technology or database.
Thanks,
Saravanan Rajavel

Synchronous File- Soap scenario with fault message

Hi!
I have a File to Soap synchronous scenario.
All is right when no exception is returned by the web service.
I want to use fault messages to catch thoses exceptions, so I have added fault message in message interfaces and in the mapping program in the interface mapping.
Now, when the web service return an exception like :
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
   <soap-env:Body>
      <soap-env:Fault>
         <faultcode>soap-env:Client</faultcode>
         <faultstring xml:lang="en">NOT_CREATED</faultstring>
         <detail>
            <n0:Z_WS_CREATE_WAGON.Exception xmlns:n0="urn:sap-com:document:sap:rfc:functions">
               <Name>NOT_CREATED</Name>
               <Text> does not have packaging material type and is therefore not a pack.mat.</Text>
               <Message>
                  <ID>HUSELECT</ID>
                  <Number>041</Number>
               </Message>
            </n0:Z_WS_CREATE_WAGON.Exception>
         </detail>
      </soap-env:Fault>
   </soap-env:Body>
</soap-env:Envelope>
I get the following error :
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
   <SAP:Category>XIServer</SAP:Category>
   <SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
   <SAP:P1>http://www.arcelormittal.com/radis/rad IM_RAD_to_ZWsCreateWagon</SAP:P1>
   <SAP:P2 />
   <SAP:P3 />
   <SAP:P4 />
   <SAP:AdditionalText />
   <SAP:ApplicationFaultMessage namespace="" />
   <SAP:Stack>Interface mapping http://www.arcelormittal.com/radis/rad IM_RAD_to_ZWsCreateWagon does not exist in runtime cache</SAP:Stack>
   <SAP:Retry>N</SAP:Retry>
</SAP:Error>
My mapping program for fault message is well defined (I tested it with the exception message received from the web service).
I have also refresh caches, but without success...
Can anyone help me ?
Thanks in advance,
Laurence

Hey Laurence,
A File adapter is aysnchronous u cant use for synchrous because it cant acknwlodge the response it gets or itt sends.
regarding two asynchoronus
1. file to SOAP asychn.
2. triggger the second one if SOAP has exception then pass the error from SOAP to New File.
using BPM we have to use Transportion level acknowledgments
please reward points if it helps
Regards
Sreeram.G.Reddy

Proxy to SOAP scenario-With Attachment and Mapping

I have a scenario to be developed, it is a Proxy to SOAP sceanrio.
There are about 8 fields coming from Proxy.
Can we create an attachment from these fields.
Also we have to do a mapping of this attachment to a field in the target External Defination and also 2 fields of the 8 have to mapped to the other respective fields of the external defination.
All this has to be posted on a webservice through SOAP with
the 2 fields in payload and
the attachment in the attachemnt section of the message
Could this be achieved?

In ABAP proxy you create a message with the two fields which you need for main SOAP message.
The attachment is created exactly how it is requested from web service.
You create a String with the XML (including tags) and do a codepage conversion to UTF-8 (or whatever is requested)
Note: The payload is created in UTF-8 automatically, the attachment is treated as binary.
You can also use a Java mapping for creating the attachment, if you have good Java skills, but I recommend to use program code for one purpose only on one place.

SOAP to SOAP Scenario with an Attachment

Hi,
We are using this scenario for transfering file from one location to another location with an attachment. From Web service client we are succefully sending an attachment to XI system. During mapping, we are facing problem while sending an attachment from inbound schema to outbound schema. Being XI is using XML for mapping and important thing is here that whether XML can handle attachments or not? If yes, then whats the way to handle attachment issue in XI 3.0?
Thanks and Regards,
Rohit Goyal

Hi Holger,
Thanks for your reply but wanted some more inputs on this. We have define two parameter as inbound and outbound schema as FileName and Filecontent. FileName contains the name of file and FileContent containes href link which points to an attachment. FileContent is of type base64Binary. Similarly FileName and FileContent are defined in outbound schema as well. href linf should pass from filecontent Inbound schema to Outbound schema. But that is not passing. In receiver side, we have web service running which takes these two inputs (FileName, and fileContent).
But as you r saying we don't require mapping? Can you let me know, then how we can pass input varaibles to the webservice.
Pls elaborate more on this.
With Regards,
rohit

RFC to SOAP scenario (with out XI/PI)

Dear Experts ,
Is it possible to push data from RFC to Webservice with out using XI/PI.
Regards,
Kartheek.

It is indeed possible, however without having used PI/Xi in the middle, once the mentioned scenario would be implemented, it would be difficult to keep the track of the messages that would flow across systems (i.e. message log, corresponding data etc.). So my suggestion would be to make use of the PI module as a middle ware.
Please check the URL that regards to your query.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0d0a250-ccd1-2c10-9e9f-b9d5cf259a6d?quicklink=index&overridelayout=true
Mutti

Timesten replication with multiple interfaces sharing the same hostname

Hi,
we have in our environment two Sun T2000 nodes, running SunOS 5.10 and hosting a TT server currently in Release 7.0.5.9.0, replicated between each other.
I would like to have some more information on the behavior of the replication w.r.t. network reliability when using two interfaces associated to the same hostname, the one used to define the replication element.
To make an example we have our nodes sharing this common /etc/hosts elements:
151.98.227.5 TBMAS10df2 TBMAS10df2-10 TBMAS10df2-ttrep
151.98.226.5 TBMAS10df2 TBMAS10df2-01 TBMAS10df2-ttrep
151.98.227.4 TBMAS9df1 TBMAS9df1-10 TBMAS9df1-ttrep
151.98.226.4 TBMAS9df1 TBMAS9df1-01 TBMAS9df1-ttrep
with the following element defined for replication:
ALTER REPLICATION REPLSCHEME
ADD ELEMENT HDF_GNP_CDPN_1 TABLE HDF_GNP_CDPN
CHECK CONFLICTS BY ROW TIMESTAMP
COLUMN ConflictResTimeStamp
REPORT TO '/sn/sps/HDF620/datamodel/tt41dataConflict.rpt'
MASTER tt41data ON "TBMAS9df1-ttrep"
SUBSCRIBER tt41data ON "TBMAS10df2-ttrep"
RETURN RECEIPT BY REQUEST
ADD ELEMENT HDF_GNP_CDPN_2 TABLE HDF_GNP_CDPN
CHECK CONFLICTS BY ROW TIMESTAMP
COLUMN ConflictResTimeStamp
REPORT TO '/sn/sps/HDF620/datamodel/tt41dataConflict.rpt'
MASTER tt41data ON "TBMAS10df2-ttrep"
SUBSCRIBER tt41data ON "TBMAS9df1-ttrep"
RETURN RECEIPT BY REQUEST;
On this subject moving from 6.0.x to 7.0.x there has been some changes I would like to better understand.
6.0.x reported in the documentation for Unix systems:
If a host contains multiple network interfaces (with different IP addresses),
TimesTen replication tries to connect to the IP addresses in the same order as
returned by the gethostbyname call. It will try to connect using the first address;
if a connection cannot be established, it tries the remaining addresses in order
until a connection is established.
Now On Solaris I don't know how to let gethostbyname return more than one interface (the documention notes at this point:
If you have multiple network interface cards (NICs), be sure that “multi
on” is specified in the /etc/host.conf file. Otherwise, gethostbyname will not
return multiple addresses).
But I understand this could be valid for Linux based systems not for Solaris.
Now if I properly understand the above, how was the 6.0.x able to realize the first interface in the list (using the same -ttrep hostname) was down and use the other, if gethostbyname was reporting only a single entry ?
Once upgraded to 7.0.x we realized the ADD ROUTE option was added to teach TT how to use different interfaces associated to the same hostname. In our environment we did not include this clause, but still the replication was working fine regardless of which interface we were bringing down.
My both questions in the end lead to the same doubt on which is the algorithm used by TT to reach the replicated node w.r.t. entries in the /etc/hosts.
Looking at the nodes I can see that by default both routes are being used:
TBMAS10df2:/-# netstat -an|grep "151.98.227."
151.98.225.104.45312 151.98.227.4.14000 1049792 0 1049800 0 ESTABLISHED
151.98.227.5.14005 151.98.227.4.47307 1049792 0 1049800 0 ESTABLISHED
151.98.227.5.14005 151.98.227.4.48230 1049792 0 1049800 0 ESTABLISHED
151.98.227.5.46050 151.98.227.4.14005 1049792 0 1049800 0 ESTABLISHED
TBMAS10df2:/-# netstat -an|grep "151.98.226."
151.98.226.5.14000 151.98.226.4.47699 1049792 0 1049800 0 ESTABLISHED
151.98.226.5.14005 151.98.226.4.47308 1049792 0 1049800 0 ESTABLISHED
151.98.226.5.44949 151.98.226.4.14005 1049792 0 1049800 0 ESTABLISHED
Tried to trace with ttTraceMon but once I brought down one of the interfaces did not see any reaction on either node, if you have some info it would be really appreciated !
Cheers,
Mike

Hi Chris,
Thanks for the reply, I have few more queries on this.
1.Using the ROUTE CLAUSE we can use multiple IPs using priority level set, so that if highest priority level set in thr ROUTE clause for the IP is not active it will fall back to the next level priority 2 set IP. But cant we use ROUTE clause to use the multiple route IPs for replication simultaneously?
2. can we execute multiple schema for the same DSN and replication scheme but with different replication route IPs?
for example:
At present on my system, I have a replication scheme running for a specific DSN with stand alone Master-Subscriber mechanism, with a specific route IP through VLAN-xxx for replication.
Now I want to create and start another replication scheme for the same DSN and replication mechanism with a different VLAN-yyy route IP to be used for replication in parallel to the existing replication scheme. without making any changes to the pre-existing replication scheme.
for the above scenarios, will there be any specific changes respective to the different replication schema mechanism ie., Active Standby and Standalone Master Subscriber mechanism etc.,
If so what are the steps. like how we need to change the existing schema?
Thanks In advance.
Naveen

How to use one I-tunes library with multiple windows users (family) on 1 pc

On our family pc we log in with different accounts. We want to use I-Tunes but all have the same library. I tried to create a library not in the users directory, but in the All Users folder that is accessible for everyone. However, when I import the music in the library for one user and set the same location for another user, I-tunes does not recognize the library. So everyone has to create it's own library.
What are the best practices to overcome this?

Keep in mind that what you have done now is you have multiple iTunes libraries accessing the same media folder. Meaning, that each account can have their own ratings, playlists, etc. but more importantly, each account does NOT know what the other account does, so if your daughter adds a CD to her account, it will go into the shared folder, but it will NOT automatically go into your wife's iTunes library. She would have to add it manually. Likewise, if one account deletes music from their library and tells iTunes to remove it to the trash, the other accounts will not know and iTunes will still try to access the file from the shared location even though the file is now trashed.
Each account has their own database files (.itl files in the iTunes folder) which stores this stuff.
If you want to have everyone use the exact same library which means the same ratings, playlists, etc. then you need to move the database files into that same location and set each iTunes account to read the same data.
How to open an alternate iTunes Library file or create a new one
http://docs.info.apple.com/article.html?artnum=304447
Patrick

Solved. Travel router WTR54GS sharing one wireless hotspot connection with multiple devices

Hi, Passing on info I've learned.
The manual for the WTR54GS mentions being able to "...use multiple devices on a single hotspot account in a coffee shop or airport lounge...". See my original posting, "How to set up a wireless private bubble at paid hotspot? WTR54GS?", which ended in a dead end. I subsequently had a Linksys live chat session and the representative provided the solution. Perhaps worthy to be included in the Wireless FAQ?
Situation: you have access to a paid hotspot (hotel room, meeting room, etc.) and you want to share the connection with several devices, also wirelessly.
Solution: the WTR54GS can accept an incoming Internet connection wirelessely and re-broadcast that connection to form your own private bubble or network. (Note the WTR54GS can also accept an incoming Internet connection via Ethernet cable).
Linksys Live Chat pointed me to these web pages.
Go to the Linksys Easy Answers page: For a schematic of the concept of "associating the travel router to a hotspot (wirelessly)" search for Easy Answer ID# 4831
URL for above is http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4831&p_created=1167963305&p_sid=GmLnq3Zi&p_accessibility=0&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9NjImcF9wcm9kcz0wJnBfY2F0cz0xNzIxLDE3MjMmcF9wdj0mcF9jdj0yLjE3MjMmcF9zY2ZfbGFuZz0xJnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9V1RSNTRHUw**&p_li=&p_topview=1
There is a "configuration simulator" that shows the options for selecting a wired or wireless incoming Internet Type.
http://linksys.com/ui/files/WTR54GS/1.0_15/Setup-Wireless.htm
The hotspot has to be "open", that is transmitting an SSID and with no WEP or WPA key. It may have a log-in page accessible via a web browser, this is okay as this will be passed onto the connected device.
My personal application is to be able to connect a PDA that has a 801.2b wifi to a 801.2g wireless network. I haven't tried it but if this works, it will extend the useful life of my PDA in a "g" environment. Will report back once I find a "g" only environment. Comments?
-Tony
Dang, the long URL is making for a really wide message. Is there a fix?
Message Edited by tony_vancouver on 02-28-2008 02:08 PM
Message Edited by tony_vancouver on 02-28-2008 02:12 PM

There are two conditions which must be met in order to use your WTR54GS to "extend" an incoming, wireless internet connection:
The incoming connection must be unsecured. You have already covered this point;
The security settings on your WTR54GS can only be set to "WEP," or to "Disabled." If you choose "WEP," then you can use either a 40/64-bit, or a 128-bit key.
If those two conditions have been met, then it works fine -- says the guy who is sharing one paid internet conneciton in his hotel amongst three devices, and with co-workers in nearby rooms.

One SOAP-SOAP scenario with multiple interfaces

Similar Messages

Maybe you are looking for