One touch to clear Finder?

Back in OSX 10.3, there was a one touch button command that would clear all the open documents and applications to reveal the Finder. It was very useful to locate something kept on the Finder, and eliminated moving things around to see behind them.
In OSX 10.5, there is the F3 button, which reveals all open pages and applications.
Is there a one-button command to reveal the Finder?
Best regards, Isshi.

in system preferences go to expose + spaces, check that "show desktop" is set to "f11" next go to the main system pref meu and go to "keyboard and mouse". Check that Use all f1, f2 keys as standard function is ticked. should work now.

Similar Messages

One touch access cant find modem

Phone: N95 8GB
All latest software and drivers installed.
PC suite manager working fine.
Phone connected by cable to USB port.
On the PC in device manager, can see the N95 as a modem.
All other aspects of connecting to the PC working fine.
However when I go to One Touch Access, it says "No modem found".
When I go to the settings page the drop down box to select a modem is not available.
Help!

How about if you first login as admin, then set correct modem and operator, then log-off and login as normal user? Does this work?

One Touch Access cannot find Bluetooth Modem

Connecting a 6267 to Windows XP Pro PC using Bluetooth dongle running IVT Bluesoleil. The phone is Paired OK. the PC reports that it is connected to Nokia 6267 and Nokia PC Suite appears to work OK on most functions but doesn't work at all when attempting to Connect to the Internet.
One Touch Access reports "No Modem found" and when I drop down on the list of available modems the Nokia 6267 Bluetooth modem is not shown. In Control Panel/Phones and Modems it is present and can be used in Dial Up Networking to make a connection supporting browser and Outlook. I am using Nokia PC Suite 6.86.9.0 and Bluesoleil 2.3.0. I have followed the advice on another similar posting and installed Nokia Connectivity Cable Driver 6.85.10 without any improvement.
I can connect using a USB cable and the Nokia 6267 Cable Modem, but it bugs me not to be able to use BT.
Any suggestions will be welcomed.
Version details are as follows:
PC Connectivity Solution:
Version 8.15.0.0
[Nokia Connectivity Cable Driver:]
Version 6.85.10.0
Operating system:
Microsoft Windows XP 32-bit Edition, Service Pack 2
Language: English
Language for non-Unicode programs: English
Detected Internet browsers:
- Microsoft Internet Explorer 7.0 (Default browser)
- Mozilla Firefox 2.0
Detected Bluetooth stacks:
- Microsoft (Version: 5.1.2600, Build: 2180)
- IVT BlueSoleil (Version: 2.3.0, Build: 0)

Hi,
Does your phone has got latest firmware 21.x??? What does your phone displays if you call *#0000# on your mobile ???
Message Edited by cricfancy on 11-Jun-2009 02:18 PM

Wondering if one has not activated "find my device" on their ipod touch, can you still locate with the serial number?

Wondering if one can locate an ipod touch if the "find my device" was not activated, all we have is the serial number?

No.
Barry

Is there a "one-touch" way to convert to my existing library to DNG?

Is there a "one-touch" way to convert to DNG?
My Aperture library currently has three types of files: JPEG files taken with point-and-shoot camera going back for years, (ii) RAW (NEF) files made with a Nikon D60, (iii) RAW (CR2) files made with a Canon G9, and (iv) RAW (DNG) files I have shot recently.
I am interested in converting all the non-DNG RAW files (NEFs and CR2s) into the Adobe DNG file format. I understand that the format has a smaller file size (than the original RAW file) and that it is "lossless" (unlike converting to JPEG). So, in addition to "standardizing" my file-types, it will also reduce my overall library size (in GBs).
So, the question is: is there a way to take my existing Aperture library and, through some (hopefully free) combination of scripts and programs, convert all the RAW files to DNG automatically and without having to export each one from Aperture and them import it again. That is, I want a solution that will look at each file and ignore the JPEGs and DNGs, (ii) convert the NEFs and CR2s into DNG, and (iii) move the original NEF/CR2 files to a folder (just in case)?
This is not an problem going forward, because I can easily just import as DNG to begin with ... but its an issue for a few thousand images in my library.
Any ideas? Also, anyone think this is a crazy bad idea?
Thanks,
~B

Do you find that using Aperture to "import" the pictures (e.g., using the import function on Aperture and pointing it at your memory card) gives better results than using the DNG converter to "import" (e.g., by selecting the camera memory card and saving the conversions to disk, then importing those DNG files into Aperture)?
Not the way it works. The camera memory card does not have conversions on it, it has RAW (or JPEG) image files.
IMO generally most useful to help keep drives underfilled and fast (drives slow as they fill) is to manage by Reference ("referenced images") as in the workflow outline below where Master images can live anywhere. However with small changes similar workflow could be applied to Managed Masters.
I feel pretty strongly that card-to-Aperture or even camera-to-Aperture handling of original images puts originals at unnecessary risk. I suggest this workflow, first using the Finder (not Aperture) to copy images from CF card to computer hard drive:
• Remove the CF card from the camera and insert it into a CF card reader. Faster readers and faster cards are preferable, and Firewire is much preferable to USB2.
• Finder-copy images from CF to a labeled folder on the intended permanent Masters location hard drive.
• Eject CF.
• Burn backup hard drive or DVD copies of the original images (optional recommended backup step).
• Eject backup hard drive(s) or DVDs.
• From within Aperture, import images from the hard drive folder into Aperture selecting "Store files in their current location." This is called "referenced images." During import is the best time to also add keywords, but that is another discussion.
• Review pix for completeness (e.g. a 500-pic shoot has 500 valid images showing).
• Reformat CF in camera, and archive originals off site on hard drives and/or on DVDs.
Note that the "eject" steps above are important in order to avoid mistakenly working on removable media.
Alternatively, does anyone actually use (or recommend) Nikon-branded software for any step in this process? If your camera shoots JPG (as all mine did till a few months ago), it does not matter ... but does the RAW thing change that equasion?
Yes RAW changes the equation. Folks who want the very best NEF conversions will use Nikon Capture NX2 but the interface *****. Personally I find Aperture very good for the D2x.
Good luck!
-Allen Wicks

My HP Pavilion 23 touchsmart all in one touch screen is not working

My HP Pavilion 23 touchsmart all in one touch screen is not workin. I have restored the system. I didn't see any place in the pen and touch to disable or enable and not sure if i should instill drivers. What can i do?

Hello @junk4are,
I understand that you are having issues with your HP Pavilion 23 Touchsmart Desktop PC's touchscreen and are wondering if you should install your drivers. I would certainly recommend that you do so. I would be happy to assist you, but first I would encourage you to post your product number for your computer as there are various versions of the HP Pavilion 23. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Powerbook 15" w/ Tiger won't read Maxtor One Touch II External Hard Drive

Hi all:
For some reason my G4 Powerbook can't recognize my Maxtor One Touch II external hard drive. I am trying to find a firewire cable that fits, as the Maxtor just gave me a USB and says that the cable won't work with mac. I am trying to find a cable that has a "printer type" end and a firewire end. Will it help? Where do I find it?
Thanks,
Chris

No the printer type end, won't work in Mac OS X either. The software that is included with One Touch does not work well on Tiger or later. Instead I recommend not using that software, and instead using Shirt Pocket Superduper for backup. Or look for EMC/Dantz to update the drivers for the included software to Tiger. I think the One Touch does have a Firewire 6 pin connector which is Mac compatible. These ports look like the Firewire port on your G4 Powerbook. Port number 2 below is a Firewire port:
You can buy the cable from the Apple Store, or any major Mac mail order shop such as Macwarehouse, Maczone, Macconnection, or even CDW.

N95 + One Touch Access issue on Windows Vista Busi...

Hi all,
I searched for a solution to this issue both in this forum and in the Nokia PC Suite help but I couldn't find any.
I'm able to use Nokia PC Suite with my N95 + cable DKE-2 except for One Touch Access.
When I clic on "Connect to the Internet" I get the following error message pop up:
"You do not have sufficient privileges to modify the connection properties. Only Administrators can create and modify connections."
The funny thing is that I am an Admnistrator of my notebook (I don't know how many times I checked it from the Advanced User Accounts Control Panel).
If I clic "Ok" I get the One Touch Access window with the following message:
"There are no Nokia modems installed. Please make sure you have installed Nokia Connectivity Cable driver software."
And below the picture of the notebook and the base station:
"No modem found!"
But if I check in the Device Manager (Control Panel) list I find "Nokia N95 USB Modem #2".
Moreover, as far as I understood, the cable driver is automatically installed with the Nokia PC Suite and I shouldn't reinstall it: http://europe.nokia.com/A4144937.
This is the System Information I get from the Help > About > System Info command:
Operating system:
Microsoft Windows Vista
Build 6000
No service pack installed
Language: English (United States)
Language for non-Unicode programs: English (United States)
Locale: Italian (Standard)
Input language: Italian (Standard)
Nokia PC Suite:
Version 6.81.13.0
Language: English
Connectivity Cable Drivers:
Microsoft Outlook:
Version 12.0
Build 5000
Bluetooth stack:
Microsoft Bluetooth stack
Version 6.0.6000.16386
This is the log of the "Query Modem" command (Device Manager > Properties > Diagnostics):
ATQ0V1E0 - OK
AT+GMM - Nokia N95
AT+FCLASS=? - 0
AT#CLS=? - COMMAND NOT SUPPORTED
AT+GCI? - COMMAND NOT SUPPORTED
AT+GCI=? - COMMAND NOT SUPPORTED
ATI1 - 356962013384111
ATI2 - V 06wk41v31
05-06-07
RM-159
(c) Nokia
ATI3 - Nokia N95
ATI4 - 2006_wk41_v26
ATI5 - OK
ATI6 - OK
ATI7 - OK
The modem driver is updated: version 6.84.0.0, date 21/06/2007.
The Nokia N95 software is updated: version 12.0.013.
Any help is very appreciated!
Michele
Thank you,
Michele

I've had the same problem but it was not solved by installing PC Suite 6.84 (as this failed to install), however this is how I got around it.
Find the "OneTouchAccess.exe" program. It should be in C:/Program Files/Nokia/Nokia PC Suite 6/. Right-click the "OneTouchAccess.exe" program icon and go to ‘Properties’, then click the ‘Compatibility’ tab. Under ‘Privilege Level’, select ‘Run this program as administrator’ and click ‘OK’.
Then when "PC Suite" tries to launch "OneTouchAccess.exe" via the "Connect to the Internet" icon, it does so with the right privilieges.
(Any body know why PC Suite 6.84 would not install on my Acer notebook running Windows Vista V6.0 Build 6000?)

Maxtor One Touch II USB/firewire Ext HD won't mount

The drive shows up on the bus, but does not mount, and also does not show up with Disk Utility. I've taken it to the Apple Genius Bar and they couldn't find the problem, and said they only had 15 minutes to dedicate to me anyway. The drive didn't show on their MBP either. I've had this connected to my G4 for the past year, with no problem, and it still functions just fine there.
As another note, my Canon G6 Powershot, which has previously mounted on this machine (The MBP) via USB, no longer does. I can download photos directly into Iphoto, but the drive never mounts to the desktop.
I've tried both the USB and Firewire options with my external, with the same results. I need to download my photos from the MBP to the external, as it's getting pretty full. I noticed in another forum that FWT mode was not working with non-Intel macs prior to 10.3.9. but it's still not working between my G4 and the MBP.
I know there are several issues here, but was hoping someone could help me sort them out if I dump the whole scenario.
Any assistance would be greatly appreciated.
Macbook Pro Mac OS X (10.4.7) 1.83GB w/ 1GB DDR2 SDRAM
Macbook Pro Mac OS X (10.4.7) 1.83GB w/ 1GB DDR2 SDRAM

I have a one touch II that I purchased to use to backup and store files for my mbp.
Mine mounted correctly, but the one touch button did not work. After trying to fix it myself, I called the Maxtor tech support, and they said that they don't support using their drives or their software with intel based macs. Of course they only told me that after spending a long time on the phone.
So the only advice I can give to you is to not try Maxtor's tech support; it will be a waste of time.
Or perhaps your USB ports are broken and need to be replaced on your mbp.

Maxtor One Touch II Won't Mount

I'm running 10.6.8 and my maxtor one touch II won't mount all of a sudden? I've tried fire wire 400 and fire 400to800, restarting etc. The drive won't show up?
The driver update on the Maxtor/Seagate site opens up as code in a text edit file, it doesn't show up as the typical box to be unstuffed. Either way, it's an old update and I've been using this external drive for years. It's definitely spinning, but the computer just can't find it.

re:
Re: Maxtor One Touch II Won't Mount
Jan 1, 2012 8:19 PM (in response to RothHaus)
Can Disk Utility see it? If so try repairing the drive.
As it turns out I finally got the drive to mount, after several attempts. It was simply a matter of there being less than a gig free on the maxtor so it was having trouble booting up.
Thank you for the response!

Maxtor One Touch 3 is not showing on my desktop no more

Restarting computer Maxtor One Touch 3 doesn't show on my desktop. It will only if I pull the firewire our and in. It used to be OK. Even turning the power off or on on the Maxtor its still not showing.
Any idea how to fix that?

At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
If that doesn't work, try these...
Does it boot into Open Firmware with CMDOption+of ?
http://docs.info.apple.com/article.html?artnum=42642
Have you done a PRAM reset...
http://docs.info.apple.com/article.html?artnum=2238
Tried resetting the PMU?
http://docs.info.apple.com/article.html?artnum=14449

One touch Recovery feature not working

THe one touch recovery key feature is not working in my laptop. Initially I used to shut down my system and press the key. It was working well. If I press the key the system gets booted normally and it doesn't goes to the recovery panel. Kindly help me in trouble shooting it
Thanks in Advance

hey rajeshmurali,
i suggest uninstalling the software, then go to >>http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers.html
download the latest version of the software and reinstall.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

G460 became very slow after installing windows 7...help with one touch recovery??

hi ...i got a laptop from friend 9 months ago from us ....its g460 with windows 7 home premium os...for practising sharepoint tech: i installed windows 7 ultimate 1 month back and after that i tried to install .net and sharepoint s/w with no use...after that whenever i start its taking neary 15 mins to start itself and then its saying windows s7 is not genuine...si i called up service center and they said that s/w instllation they dont cover under warranty ..and they are charging around sme 2000 bucks to install windows 7 premium and said that we will also provide one touch recovery...
cant i with online support do the one touch recovery and get back the laptop in the previous state?? what is this one touch recovery all about?? is it only for data ?? thanks in advance.

hey durgamavu,
Do check the following >>
http://consumersupport.lenovo.com/%28S%28wjgnfm55be4kejqew1t0nj55%29%29/lk/en/HintsandTips/hints_sho...
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Access to Maxtor One Touch

Hi,
I change my PC for an iMac and I plugged my external hard drive (One Touch - Maxtor) to the iMac to retreive my archive.
I had no issue to copy the archive PC files from the Maxtor to the iMac; however all the files in the Maxtor are in read only! I cannot copy any files from iMac to the Maxtor even when I log on as root.
All Folders or Files have "Owner & Access rights" set to Read Only and I did not find how to change the access rights so that I can copy, remove or create new files in my external hard drive.
Could anybody help me on that issue?
Thanks in advance.
Greg

Is the drive formatted as NTFS? Mac OS X can read NTFS but not write to it.

One touch recording - CUCM 9.0

Im trying to find out a bit more about the one touch recording feature in CUCM. Does this mean that from Jabber, users will be able to record calls natively using CUCM? Or is there some sort of third party hw/sw required for this integration?
Also, if these are client side recordings, then what format is the recording stored and is it audio only, or audio/video and IM?
Thank you.

As the product has not been FCS'ed and the documentation has not been yet posted, that kind of stuff is still subject to NDA and as such cannot be discussed in a public forum, if you're on the EFT reach your AM so they can assist with your question or wait until documentation is published on CCO.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

One touch to clear Finder?

Similar Messages

Maybe you are looking for