Online Porfolio

First let me say, I am a print designer, so web is a bit
foreign to me. I am attempting to create an online portfolio
website for my print design work, and have run into a few problems.
Does anyone know how to make a button proceed to the next
frame when it is pressed, but not go past a certain frame number? I
assume it requires an if else statement, but I'm a bit lost.
Also, I need the same thing only going backwards. These
buttons will be used for a forward and back command while viewing
images, basically I am trying to create a loop for viewing my
portfolio.

If you are only stepping a frame at a time you can put a stop
on each keyframe and use this on the main timeline (assuming your
buttons are also there):

Similar Messages

HP AIO Remote shows wireless printer offline when it is online and can print to it.

HP AIO Remote installed on my Windows 8.1 Yoga 2 shows my wireless printer is offline, when it is online and I can print to it wirelessly. How can I get it to recognize my wireless printer is online wirelessly? AIO Remote will only recognize the printer is online when the USB in connected to the Yoga 2.

Hi rpmcintyre,
Thank you for the additional information. I apologize for misunderstanding. I just want to confirm that the HP AiO app that you downloaded onto your Windows 8.1 computer is showing your printer as offline when you are able to print wirelessly to the printer.
I have two different documents for you. The first one is How to Use the HP AiO Remote App for Windows 8. It has a FAQ section at the bottom of the document with trouble shooting steps. I have also included the Supported Printers for the HP Scan and Capture App.
If the above documents don’t assist you, would you please let me know which make/model/product number of HP printer that you have? How Do I Find My Model Number or Product Number?
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Mini-DVI to VGA - online video freezes when dragged from MacBook to LCD TV

I connected my MacBook to my LCD TV this morning via Mini-DVI to VGA, and am trying to stream online video. The video works fine when the browser is on my MacBook screen, but when I drag it over to the LCD TV, the video freezes. I tried setting the screens to mirrored as well, and the video wouldn't play (on either). I'm not really sure what else to try. Any help would be appreciated!

Try this...
With the TV connected, go into Displays Preferences and click on the Arrangement tab. You should see two blue rectangles meant to represent the two screens. One of the rectangles will have a white bar across the top, meant to represent the menu bar. Drag the small white bar from one blue rectangle to the other. This will move the real menu bar to the TV, making it the primary display. Now see if your video will play on the TV.

Hello I am experiencing some problems for my iMessage and FaceTime. I did the steps the Apple provided online and I still can't get it to work. My updates are up to date. Everything is working fine it's just that the Apple iMessage won't except anyth

hello I'm experiencing some problems with my iMessage and face time. I did with Apple provided me online. I did the steps. Nothing will work, it keeps saying activation turn on Wi-Fi when my Wi-Fi is turned on. As soon as I got this on Christmas. iMessage and FaceTime have not been working. My Apple and ID password are correct. Everything else is working fine. My iOS updates are up to date, everything is fine except FaceTime and iMessage

Did you try everything here?
iOS: Troubleshooting Messages
Using FaceTime and iMessage behind a firewall
iOS: Troubleshooting FaceTime and iMessage activation
FaceTime, Game Center, Messages: Troubleshooting sign in issues
In the future saying your tried the Apple on-line articles does provide us with information as to which ones you found and tried

Dynamic CRM 2013 Online how to execute Report, generate PDF and email

Dear All,
I am using Dynamic CRM 2013 online. For quote, I have workflow and Dialogue processes for review process. On approval, I want the system to generate a PDF of quote report, attach the PDF and email it to the Customer.
Better I would like, When approver, clicks on the approve button, the system should auto generate a PDF of quote report, attach the PDF and email it to the Customer, without any further input from the user. If its not possible, I may have to put button on
quote form.
I am using the attached code, but facing various issues.
1. Under prepare the SOAP Message coding part, I am not sure what should be the below URL for CRM 2013 Online?
xHReq.Open("POST", "/mscrmservices/2007/CrmService.asmx", false);
2. What should be the emailid here? Is it Recepient Contact id(Guid) ?
var emailid = resultXml.selectSingleNode("//CreateResult").nodeTypedValue;
alert("emailid" + emailid.toString());
3. Using this code, not able to create Entity for "ActivityMimeAttachment", I am getting newEntity as undefined.
Below is the code I am using. Please check and help me out, where I am going wrong. Let me know if any better way to implement it. At present, I have put one button on quote form, on click event, below code will get executed.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title></title>
<script type="text/javascript">
var Xrm;
if (window.opener) { Xrm = window.opener.Xrm; }
else if (window.parent) { Xrm = window.parent.Xrm; }
function getReportingSession() {
var reportName = "Quotation_Report"; //set this to the report you are trying to download
var reportId = "7C39D18F-1DC6-E311-8986-D89D6765B238"; //set this to the guid of the report you are trying to download
var recordid = Xrm.Page.data.entity.getId();
// recordid = recordid.substring(1, 37); //getting rid of curly brackets
alert(recordid);
var pth = Xrm.Page.context.getServerUrl() + "/CRMReports/rsviewer/reportviewer.aspx";
var retrieveEntityReq = new XMLHttpRequest();
retrieveEntityReq.open("POST", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.setRequestHeader("Content-Type", "application/x-www-form-urlencoded");
retrieveEntityReq.send("id=%7B" + reportId + "%7D&uniquename=" + Xrm.Page.context.getOrgUniqueName() + "&iscustomreport=true&reportnameonsrs=&reportName=" + reportName + "&isScheduledReport=false");
var x = retrieveEntityReq.responseText.indexOf("ReportSession=");
var ret = new Array();
ret[0] = retrieveEntityReq.responseText.substr(x + 14, retrieveEntityReq.responseText.indexOf("&", x) - x - 14); //the session id
x = retrieveEntityReq.responseText.indexOf("ControlID=");
ret[1] = retrieveEntityReq.responseText.substr(x + 10, retrieveEntityReq.responseText.indexOf("&", x) - x - 10); //the control id
return ret;
function createEntity(ent, entName, upd) {
var jsonEntity = JSON.stringify(ent);
var createEntityReq = new XMLHttpRequest();
var ODataPath = Xrm.Page.context.getServerUrl() + "XRMServices/2011/OrganizationData.svc";
createEntityReq.open("POST", ODataPath + "/" + entName + "Set" + upd, false);
createEntityReq.setRequestHeader("Accept", "application/json");
createEntityReq.setRequestHeader("Content-Type", "application/json; charset=utf-8");
createEntityReq.send(jsonEntity);
var newEntity = JSON.parse(createEntityReq.responseText).d;
alert("new entity" + newEntity);
return newEntity;
function createAttachment() {
var params = getReportingSession();
var recordid = Xrm.Page.data.entity.getId();
alert("recordid " + recordid);
var orgName = Xrm.Page.context.getOrgUniqueName();
var userID = Xrm.Page.context.getUserId();
//create email record
// Prepare the SOAP message.
var xml = "<?xml version='1.0' encoding='utf-8'?>" +"<soap:Envelope xmlns:soap='http://schemas.xmlsoap.org/soap/envelope/'" +
" xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance'" +
" xmlns:xsd='http://www.w3.org/2001/XMLSchema'>" +
"<soap:Header>" +
"</soap:Header>" +
"<soap:Body>" +
"<Create xmlns='http://schemas.microsoft.com/crm/2007/WebServices'>" +
"<entity xsi:type='email'>" +
"<regardingobjectid type='quote'>" + recordid + "</regardingobjectid>" +
"<subject>" + "Email with Attachment4" + "</subject>" +
"</entity>" +
"</Create>" +
"</soap:Body>" +
"</soap:Envelope>";
// Prepare the xmlHttpObject and send the request.
var xHReq = new ActiveXObject("Msxml2.XMLHTTP");
xHReq.Open("POST", "/mscrmservices/2007/CrmService.asmx", false);
xHReq.setRequestHeader("SOAPAction", "http://schemas.microsoft.com/crm/2007/WebServices/Create");
xHReq.setRequestHeader("Content-Type", "text/xml; charset=utf-8");
xHReq.setRequestHeader("Content-Length", xml.length);
xHReq.send(xml);
// Capture the result
var resultXml = xHReq.responseXML;
// alert("resultXml " + resultXml);
// Check for errors.
var errorCount = resultXml.selectNodes('//error').length;
if (errorCount != 0) {
alert("ERROR");
var msg = resultXml.selectSingleNode('//description').nodeTypedValue;
alert(msg);
var emailid = resultXml.selectSingleNode("//CreateResult").nodeTypedValue;
alert("emailid" + emailid.toString());
//var emailid = userID;
var post = Object();
post.Body = encodePdf(params);
var email = new Array();
email[0] =new Object();
email[0].id = emailid;
email[0].entityType ='email';
post.Subject ="File Attachment";
post.AttachmentNumber = 1;
post.FileName ="Report.pdf";
post.MimeType ="application/pdf";
post.ObjectId = Object();
post.ObjectId.LogicalName ="email";
post.ObjectId.Id = email[0].id;
post.ObjectTypeCode ="email";
alert(post.ObjectId.Id);
createEntity(post,"ActivityMimeAttachment", "");
alert("created successfully");
email.Subject = "Your Order";
//Set The current order as the Regarding object
email.RegardingObjectId = {
Id: Xrm.Page.data.entity.getId(), //Get the current entity Id , here OrderId
LogicalName: Xrm.Page.data.entity.getEntityName()//Get the current entity name, here it will be “salesOrder”
//Create Email Activity
SDK.JScriptRESTDataOperations.Create(email, "Email", EmailCallBack, function (error) { alert(error.message); });
// Email Call Back function
function EmailCallBack(result) {
email = result; // Set the email to result to use it later in email attachment for retrieving activity Id
var activityPartyFrom = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyFrom.PartyId = {
Id: customerId, // id of entity you want to associate this activity with.
LogicalName: "contact"
// Set the "activity" of the ActivityParty
activityPartyFrom.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyFrom.ParticipationTypeMask = { Value: 2 }; // 2 means ToRecipients
// Create the from ActivityParty for the email
SDK.JScriptRESTDataOperations.Create(activityPartyFrom, "ActivityParty", ActivityPartyFromCallBack, function (error) { alert(error.message); });
var activityPartyTo = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyTo.PartyId = {
Id: ownerId, // id of entity you want to associate this activity with.
LogicalName: "systemuser"
// Set the "activity" of the ActivityParty
activityPartyTo.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity). activityPartyTo.ParticipationTypeMask = { Value: 1 }; // 1 means Sender
// Create the from ActivityParty
SDK.JScriptRESTDataOperations.Create(activityPartyTo, "ActivityParty", ActivityPartyToCallBack, function (error) { alert(error.message); });
//ActivityParty From Callback
function ActivityPartyFromCallBack(result) {
//ActivityParty To Callback
function ActivityPartyToCallBack(result) {
var StringMaker = function () {
this.parts = [];
this.length = 0;
this.append = function (s) {
this.parts.push(s);
this.length += s.length;
this.prepend = function (s) {
this.parts.unshift(s);
this.length += s.length;
this.toString = function () {
return this.parts.join('');
var keyStr = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/=";
function encode64(input) {
var output = new StringMaker();
var chr1, chr2, chr3;
var enc1, enc2, enc3, enc4;
var i = 0;
while (i < input.length) {
chr1 = input[i++];
chr2 = input[i++];
chr3 = input[i++];
enc1 = chr1 >> 2;
enc2 = ((chr1 & 3) << 4) | (chr2 >> 4);
enc3 = ((chr2 & 15) << 2) | (chr3 >> 6);
enc4 = chr3 & 63;
if (isNaN(chr2)) {
enc3 = enc4 = 64;
else if (isNaN(chr3)) {
enc4 = 64;
output.append(keyStr.charAt(enc1) + keyStr.charAt(enc2) + keyStr.charAt(enc3) + keyStr.charAt(enc4));
return output.toString();
var bdy = new Array();
var bdyLen = 0;
function concat2Bdy(x) {
bdy[bdyLen] = x;
bdyLen++;
function encodePdf(params) {
bdy = new Array();
bdyLen = 0;
var retrieveEntityReq = new XMLHttpRequest();
var pth = Xrm.Page.context.getServerUrl() + "/Reserved.ReportViewerWebControl.axd?ReportSession=" + params[0] + "&Culture=1033&CultureOverrides=True&UICulture=1033&UICultureOverrides=True&ReportStack=1&ControlID=" + params[1] + "&OpType=Export&FileName=Public&ContentDisposition=OnlyHtmlInline&Format=PDF";
retrieveEntityReq.open("GET", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.send();
BinaryToArray(retrieveEntityReq.responseBody);
return encode64(bdy);
</SCRIPT>
<SCRIPT type=text/vbscript>
Function BinaryToArray(Binary)
Dim i
ReDim byteArray(LenB(Binary))
For i = 1 To LenB(Binary)
byteArray(i-1) = AscB(MidB(Binary, i, 1))
concat2Bdy(AscB(MidB(Binary, i, 1)))
Next
BinaryToArray = byteArray
End Function
</SCRIPT>
</head>
<body>
<input type="button" onclick="createAttachment();" value="Attach Report" />
</body>
</html>
Thanks. and waiting for your valuable comments.
- Mittal

Hello,
Yes, I was able to make my code working as below. Tested on CRM online 2013.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title></title>
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.4.1/jquery.min.js"></script>
<script type="text/javascript">
if (typeof (SDK) == "undefined")
{ SDK = { __namespace: true }; }
SDK.JScriptRESTDataOperations = {
_context: function () {
if (typeof GetGlobalContext != "undefined")
{ return GetGlobalContext(); }
else {
if (typeof Xrm != "undefined") {
return Xrm.Page.context;
else { return new Error("Context is not available."); }
_getServerUrl: function () {
var serverUrl = this._context().getServerUrl()
if (serverUrl.match(/\/$/)) {
serverUrl = serverUrl.substring(0, serverUrl.length - 1);
return serverUrl;
_ODataPath: function () {
return this._getServerUrl() + "/XRMServices/2011/OrganizationData.svc/";
_errorHandler: function (req) {
return new Error("Error : " +
req.status + ": " +
req.statusText + ": " +
JSON.parse(req.responseText).error.message.value);
_dateReviver: function (key, value) {
var a;
if (typeof value === 'string') {
a = /Date$([-+]?\d+)$/.exec(value);
if (a) {
return new Date(parseInt(value.replace("/Date(", "").replace(")/", ""), 10));
return value;
Create: function (object, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 201) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send(JSON.stringify(object));
Retrieve: function (id, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("GET", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 200) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
Update: function (id, object, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.setRequestHeader("X-HTTP-Method", "MERGE");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 204 || this.status == 1223) {
successCallback();
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send(JSON.stringify(object));
Delete: function (id, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.setRequestHeader("X-HTTP-Method", "DELETE");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 204 || this.status == 1223) {
successCallback();
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
RetrieveMultiple: function (type, filter, successCallback, errorCallback) {
if (filter != null) {
filter = "?" + filter;
else { filter = ""; }
var req = new XMLHttpRequest();
req.open("GET", this._ODataPath() + type + "Set" + filter, true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 200) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d.results);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
__namespace: true
</script>
<script type="text/javascript">
//Create Email and link it with Order as Regarding field
var Xrm;
var email = new Object();
var ownerID = "";
var CustomerId = "";
if (window.opener) { Xrm = window.opener.Xrm; }
else if (window.parent) { Xrm = window.parent.Xrm; }
//Get ownerid who send email of quotation to customer
function GetOwnerID() {
var owner = Xrm.Page.getAttribute("ownerid").getValue();
ownerID = owner[0].id;
var ownerName = owner[0].name;
var entityType = owner[0].entityType;
GetToEmailGUID();
//Get customerid who receive email of quotation from owner
function GetToEmailGUID() {
var Customer = Xrm.Page.getAttribute('customerid').getValue();
CustomerId = Customer[0].id;
var CustomerName = Customer[0].name;
var entityType = Customer[0].entityType;
//if CustomerId is type of "Account" then get Primary Contact id of that account
if (entityType == "account") {
var contact = Xrm.Page.getAttribute("customerid").getValue();
if (contact === null) return;
var serverUrl = Xrm.Page.context.getClientUrl();
var oDataSelect = serverUrl + "/XRMServices/2011/OrganizationData.svc/AccountSet(guid'" + contact[0].id + "')?$select=PrimaryContactId";
var req = new XMLHttpRequest();
req.open("GET", oDataSelect, false);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json;charset=utf-8");
req.onreadystatechange = function () {
if (req.readyState === 4) {
if (req.status === 200) {
var retrieved = JSON.parse(req.responseText).d;
CustomerId = retrieved.PrimaryContactId.Id;
else {
alert(this.statusText);
req.send();
function CreateEmail() {
GetOwnerID();
email.Subject = "Email with Report Attachment";
//Set The current order as the Regarding object
email.RegardingObjectId = {
Id: Xrm.Page.data.entity.getId(), //Get the current entity Id , here OrderId
LogicalName: Xrm.Page.data.entity.getEntityName()//Get the current entity name, here it will be “salesOrder”
//Create Email Activity
SDK.JScriptRESTDataOperations.Create(email, "Email", EmailCallBack, function (error) { alert(error.message); });
// Email Call Back function
function EmailCallBack(result) {
email = result; // Set the email to result to use it later in email attachment for retrieving activity Id
var activityPartyFrom = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyFrom.PartyId = {
Id: CustomerId, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
LogicalName: "contact"
// Set the "activity" of the ActivityParty
activityPartyFrom.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyFrom.ParticipationTypeMask = { Value: 2 }; // 2 means ToRecipients
// Create the from ActivityParty for the email
SDK.JScriptRESTDataOperations.Create(activityPartyFrom, "ActivityParty", ActivityPartyFromCallBack, function (error) { alert(error.message); });
var activityPartyTo = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyTo.PartyId = {
Id: ownerID, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
LogicalName: "systemuser"
// Set the "activity" of the ActivityParty
activityPartyTo.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyTo.ParticipationTypeMask = { Value: 1 }; // 1 means Sender
// Create the from ActivityParty
SDK.JScriptRESTDataOperations.Create(activityPartyTo, "ActivityParty", ActivityPartyToCallBack, function (error) { alert(error.message); });
//ActivityParty From Callback
function ActivityPartyFromCallBack(result) {
//ActivityParty To Callback
function ActivityPartyToCallBack(result) {
GetReportId('Quotation');
//Create attachment for the created email
function CreateEmailAttachment() {
//get reporting session and use the params to convert a report in PDF
var params = getReportingSession();
//Email attachment parameters
var activitymimeattachment = Object();
activitymimeattachment.ObjectId = Object();
activitymimeattachment.ObjectId.LogicalName = "email";
activitymimeattachment.ObjectId.Id = email.ActivityId;
activitymimeattachment.ObjectTypeCode = "email",
activitymimeattachment.Subject = "File Attachment";
activitymimeattachment.Body = encodePdf(params);
activitymimeattachment.FileName = "Report.pdf";
activitymimeattachment.MimeType = "application/pdf";
//Attachment call
SDK.JScriptRESTDataOperations.Create(activitymimeattachment, "ActivityMimeAttachment", ActivityMimeAttachmentCallBack, function (error) { alert(error.message); });
//ActivityMimeAttachment CallBack function
function ActivityMimeAttachmentCallBack(result) {
var features = "location=no,menubar=no,status=no,toolbar=no,resizable=yes";
var width = "800px";
var height = "600px";
window.open(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", features);
// To open window which works in outlook and IE both
//openStdWin(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", width, height, features);
//This method will get the reportId based on a report name that will be used in getReportingSession() function
function GetReportId(reportName) {
var oDataSetName = "ReportSet";
var columns = "ReportId";
var filter = "Name eq '" + reportName + "'";
retrieveMultiple(oDataSetName, columns, filter, onSuccess);
function retrieveMultiple(odataSetName, select, filter, successCallback) {
var serverUrl = Xrm.Page.context.getServerUrl();
var ODATA_ENDPOINT = "/XRMServices/2011/OrganizationData.svc";
var odataUri = serverUrl + ODATA_ENDPOINT + "/" + odataSetName + "?";
if (select) {
odataUri += "$select=" + select + "&";
if (filter) {
odataUri += "$filter=" + filter;
$.ajax({
type: "GET",
contentType: "application/json; charset=utf-8",
datatype: "json",
url: odataUri,
beforeSend: function (XMLHttpRequest) {
XMLHttpRequest.setRequestHeader("Accept", "application/json");
success: function (data) {
if (successCallback) {
if (data && data.d && data.d.results) {
successCallback(data.d.results);
else if (data && data.d) {
successCallback(data.d);
else {
successCallback(data);
error: function (XmlHttpRequest, errorThrown) {
if (XmlHttpRequest && XmlHttpRequest.responseText) {
alert("Error while retrieval ; Error – " + XmlHttpRequest.responseText);
function onSuccess(data) {
reportId = data[0].ReportId.replace('{', ").replace('}', ");
CreateEmailAttachment(); // Create Email Attachment
//Gets the report contents
function getReportingSession() {
var pth = Xrm.Page.context.getServerUrl() + "/CRMReports/rsviewer/reportviewer.aspx";
var retrieveEntityReq = new XMLHttpRequest();
var Id = Xrm.Page.data.entity.getId();
var quotationGUID = Id.replace('{', ""); //set this to selected quotation GUID
quotationGUID = quotationGUID.replace('}', "");
var reportName = "Quotation"; //set this to the report you are trying to download
var reportID = "7C39D18F-1DC6-E311-8986-D89D6765B238"; //set this to the guid of the report you are trying to download
var rptPathString = ""; //set this to the CRMF_Filtered parameter
var strParameterXML = "<fetch version='1.0' output-format='xml-platform' mapping='logical' distinct='false'><entity name='quote'><all-attributes /><filter type='and'><condition attribute='quoteid' operator='eq' uitype='quote' value='" + quotationGUID + "' /> </filter></entity></fetch>";
retrieveEntityReq.open("POST", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.setRequestHeader("Content-Type", "application/x-www-form-urlencoded");
rptPathString = "id=%7B" + reportID + "%7D&uniquename=" + Xrm.Page.context.getOrgUniqueName() + "&iscustomreport=true&reportnameonsrs=&reportName=" +
reportName + "&isScheduledReport=false&p:CRMAF_Filteredquote=" + strParameterXML;
//remove the part starting from &p:salesorderid if your report has no parameters
retrieveEntityReq.send(rptPathString);
var x = retrieveEntityReq.responseText.indexOf("ReportSession=");
var ret = new Array();
ret[0] = retrieveEntityReq.responseText.substr(x + 14, retrieveEntityReq.responseText.indexOf("&", x) - x - 14); //the session id
x = retrieveEntityReq.responseText.indexOf("ControlID=");
ret[1] = retrieveEntityReq.responseText.substr(x + 10, retrieveEntityReq.responseText.indexOf("&", x) - x - 10); //the control id
return ret;
var bdy = new Array();
var bdyLen = 0;
function concat2Bdy(x) {
bdy[bdyLen] = x;
bdyLen++;
function encodePdf(params) {
bdy = new Array();
bdyLen = 0;
var retrieveEntityReq = new XMLHttpRequest();
var pth = Xrm.Page.context.getServerUrl() + "/Reserved.ReportViewerWebControl.axd?ReportSession=" + params[0] +
"&Culture=1033&CultureOverrides=True&UICulture=1033&UICultureOverrides=True&ReportStack=1&ControlID=" + params[1] +
"&OpType=Export&FileName=Public&ContentDisposition=OnlyHtmlInline&Format=PDF";
retrieveEntityReq.open("GET", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.send();
BinaryToArray(retrieveEntityReq.responseBody);
return encode64(bdy);
var StringMaker = function () {
this.parts = [];
this.length = 0;
this.append = function (s) {
this.parts.push(s);
this.length += s.length;
this.prepend = function (s) {
this.parts.unshift(s);
this.length += s.length;
this.toString = function () {
return this.parts.join('');
var keyStr = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/=";
function encode64(input) {
var output = new StringMaker();
var chr1, chr2, chr3;
var enc1, enc2, enc3, enc4;
var i = 0;
while (i < input.length) {
chr1 = input[i++];
chr2 = input[i++];
chr3 = input[i++];
enc1 = chr1 >> 2;
enc2 = ((chr1 & 3) << 4) | (chr2 >> 4);
enc3 = ((chr2 & 15) << 2) | (chr3 >> 6);
enc4 = chr3 & 63;
if (isNaN(chr2)) {
enc3 = enc4 = 64;
} else if (isNaN(chr3)) {
enc4 = 64;
output.append(keyStr.charAt(enc1) + keyStr.charAt(enc2) + keyStr.charAt(enc3) + keyStr.charAt(enc4));
return output.toString();
</script>
<script type="text/vbscript">
Function BinaryToArray(Binary)
Dim i
ReDim byteArray(LenB(Binary))
For i = 1 To LenB(Binary)
byteArray(i-1) = AscB(MidB(Binary, i, 1))
concat2Bdy(AscB(MidB(Binary, i, 1)))
Next
BinaryToArray = byteArray
End Function
</script>
</head>
<body>
<input type="button" onclick="CreateEmail();" value="Attach Report" />
</body>
</html>
Thank you,
Mittal.

Office 2013 - The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete.

Hi Team,
Just purchased and downloaded Office Home Premium and having trouble with Outlook. For what ever reason, I am unable to create account/add my email address ([email protected]) into the program. Through the set-up process it continuously
tells me that it is unable to connect to Microsoft Exchange, and that it must be online or connected to complete. In the end, it comes up with this pop-up listing a file. Something like that. Any pointers on how to resolve this or are a lot of people having
this problem..
Also, I installed this on my laptop (OSX 10.8.2)
and it worked fine, but not on my desktop (Win8 Pro 64-bit)
Thanks
Andi

Hello,
Does OWA work?
Does this issue occur on other users?
In Exchange 2013, most of the internal and external client becomes to use Outlook Anywhere(RPC over http).
Please make sure the autodiscover.domain.com is included in the certificate.
Thanks,
Simon Wu
TechNet Community Support
Hi I am having the same issue. Brand new computer, using Office 365 and trying to set up Outlook 2013 on Win 7 machine. OWA works fine. But cannot set up Exchange on my desktop.
I don't know what you mean by "In Exchange 2013, most of the internal and external client becomes to use Outlook Anywhere(RPC over
http).
Please make sure the autodiscover.domain.com is included in
the certificate."
Can you please walk me through this? Thank you.

How do I find my online files here. I wanted to change a form to fill in it said it was online. Where?

I enrolled in a writing school just recently and all my work is suppose to be sent via attachment to an email (online) I tried to convert to word or excel but it did nothing and then I got and paid for Adobe reader I was told to do and still nothing. I am at the adobe XI trial for 30 days even and still nothing. It said also that my files that I supposedly converted are online. But where? Where do I go to see if they were supposedly converted and put online where I don't know where the bleep to go. I am totally frustrated by not being able to access these supposed files! I am not a techie person so this is beyond me.
Maria

I read and re-read your post, and I cannot understand what you are asking. So let's start with a few questions for you:
what is your operating system?
what adobe product are you using - Adobe Reader is free, and "adobe XI" means nothing. Do you mean Acrobat?
how - exactly - did you convert your files?

If I wanted to exchange my iPhone 5 for the new iPhone 6 (no additional cost after $199 gift card from selling iPhone 5) do I have to pre-order online or do I just have to show up at a Verizon store Sept 19th?

If I wanted to exchange my iPhone 5 for the new iPhone 6 (no additional cost after $199 gift card from selling iPhone 5) can I pre-order online now or do I just have to show up at a Verizon store Sept 19th?

scodaddy, that is a wonderful question. We are super excited about the new iPhone. You can always pre-order your new iPhone online and then start the mail in rebate by following this link: http://bit.ly/GGnDDC Or you can always go into the store location and do it all in store on the 19th when the phone is launched. That would depend on if the store has them in stock when you go in. I hope that this was able to address your concern.
KevinR_VZW
Follow us on Twitter @VZWSupport

Error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable

error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable.
I am creating many site collections reading records from sharepoint list using powershell in sharepoint online tenant (office 365).
Few site collections are created and then getting above error so this error record will be skipped then few succeeding record processed then again getting error.
pattern is like:
success
success
success
success
Error
success
success
success
success
success
success
error
success

Hi,
As it is an online environment, to troubleshoot this issue in an easier way, I suggest you contact Office 365 Support to see if there is any useful information in
the log files in the server side:
https://support.office.com/en-us/article/Contact-Office-365-for-business-support-32a17ca7-6fa0-4870-8a8d-e25ba4ccfd4b?ui=en-US&rs=en-US&ad=US
Best regards
Patrick Liang
TechNet Community Support

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome. Extra large font sizes and weird formatting issues only when printing emails from Gmail within Chrome. No problems when printing the same email from Gmail+Internet Exolorer or Thunderbird. Using the IE Tab extension in Chrome prints the email correctly but the style of Gmail's message window is completely weird ie: formatting bar is spread out vertically instead of horizontally. I believe it is clear that this is an application specific issue between the HP LASERJET CP1525nw printer and Google Chrome + Gmail. This printing scenario does not occur when printing anything else or when printing via another printer. I would appreciate receiving any suggestions to solve this issue.
OS: Windows 7 Ultimate x64
Browser: Google Chrome 15
HP Print driver: HP Universal Print Driver for Windows PCL6 v5.4.0
Printer is connected by WiFi to 4 computers

Hi AbZu,
You need to contact Google Chromes technical support as this is only an issue with Chrome. You have indicated that the printer functions correctly everywhere else. Check out the link below for Google Chrome technical support. Let me know if you need additional assistance?
http://support.google.com/chrome/?hl=en
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Comparison for iPod Users: Free Online Converter & DVD to iPod Converter

Compare two channels of obtaining video sources for iPod: one is using online converter, the other is DVD to iPod Converter. After the general introduction of the two methods, I will analyze their advantages and disadvantages for you to choose according to your need.
Part One: Enjoy YouTube (online videos) on iPod
Instruction: a useful website to convert online video freely: http://www.vixy.net/
For vixy, you can just copy the URL of the online video into the âURLâ blank of the vixy, then choose the format you want to convert to. Click âStartâ. For a short time, the conversion will be finished. You can click the âDownload the converted videoâ to restore the file.
http://www.aiseesoft.com/images/guide/vixy.jpg
Advantages: Free online video converter. No software to install. Only a few clicks you can get the converted file after a short while. The most important thing is that online video sources are numerous and original, so you can get the first-hand sources in time through it. Some personal DVs are also shared with you.
Disadvantages: They set limitation of the length and size of the video. The classical movies usually are not on line available. Even if existed, the quality of image and sound is inferiors.
Part Two: Enjoy DVD movies on iPod Touch, iPod Nano, iPod Classic, iPhone, iPhone (3G), Apple TV
We usually bought classical DVD movies for collection or regular watching later, but DVD cannot be copied directly into iPod for us to appreciate it at anytime and anywhere. On this occasion, we need to convert DVD to the format, video and audio settings (Resolution, Bitrate, Frame Rate, etc) supported by your iPod player.
Instruction: the way to convert DVD to iPod: using Aiseesoft DVD to iPod Converter http://www.aiseesoft.com/dvd-to-ipod-converter.html
Install and run Aiseesoft DVD to iPod Converter
http://www.aiseesoft.com/download/dvd-to-ipod-converter.exe
http://www.aiseesoft.com/images/guide/screen.gif
Step 1: Click âLoad DVDâ button to import your DVD
Step 2: Use âProfileâ drop-down list to choose your output format.
Step 3: Click âSettingsâ for setting your video parameters.
At last click âStartâ button to start your conversion.
More tips:
1. Merge into One File
If you want to merge the selected contents into one file you can check the "Merge into one file" option. As default the merged file is named after the first selected file (either a title or a chapter)
2. Movie Effect
You can set the brightness, contrast, saturation of the video and volume of the audio.
3. Trim Movie
It can help you to capture the segment of your movie.
http://www.aiseesoft.com/images/guide/dvd-to-ipod-thread-trim.jpg
4. Crop Video
You can remove black edge of your DVD movie and get any playing area of the video by using its "Crop Mode" function. You can also select "Zoom Mode" to extrude your video slightly to adjust to your portable devices so you can get the best video quality.
http://www.aiseesoft.com/images/guide/dvd-to-ipod-thread-crop.jpg
5. Take Snapshot
It allows you to capture your favorite pictures from your movie.
Advantages: In this way, you can make full use of your DVD: not only in DVD player, but your iPod player. The function of effecting and trimming allows you to clip the segment of the DVD movies complying with your will. You can enjoy more movies taking full advantage of your spare time while relaxing or traveling.
Disadvantages: DVD movies are usually popular, lacking of individualization. You can not share others' DVs.
With these two ways, we can enjoy the pleasure videos bring to us as much as we like. Have fun!

Depending on what update your iPod is, you may need
to dowload YAMB to make sure the videos play well on
your iPod. If you are watching a converted video on
your iPod and it freezes suddenly and this problem
continues, you need to download YAMB and convert the
files already converted with videora iPod converter
with YAMB, this will only take a few minutes.
I hope this helps you out.
Nope. All that a person with that problem should have to do is just update their iPod firmware to 1.1.1 with the newest updater, as that issue has been resolved in the latest firmware.

Did you know GamingAhead Launches the Ultimate Online Gaming Destination For All Ages.

Did you know GamingAhead Launches the Ultimate Online Gaming Destination For All Ages.
Gaming Ahead presents a video review of Prototype which is an action packed bizarrely made sandbox game. Avik Sogoyan and Michael Fam go through the games features and give their thoughts on the title. Be sure to check it out on GamingAhead.com where you will also find a full written review of the game. Prototype is not Infamous!

Did you know GamingAhead Launches the Ultimate Online Gaming Destination For All Ages.
Gaming Ahead presents a video review of Prototype which is an action packed bizarrely made sandbox game. Avik Sogoyan and Michael Fam go through the games features and give their thoughts on the title. Be sure to check it out on GamingAhead.com where you will also find a full written review of the game. Prototype is not Infamous!

Issue in creation of databse with the help of online user managed backup

Dear dba's
i am using oracle 11gR2 database in windows server 2003. database is running in ARCHIVE LOG mode.
i have taken an online backup of all datafile,controlfile and spfile.Then i crated folders in all the locations as required for new database.
then i registerd the service of new database named as 'newdb' by
oradim -NEW -SID newdb
then i created a password file manually in 'oracle_home\database' location.
i created a new contolfile named as controlfile_01.ctl. the content of controlfile as follows
STARTUP NOMOUNT
CREATE CONTROLFILE SET DATABASE "NEWDB" NORESETLOGS ARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 292
LOGFILE
GROUP 1 (
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_1_7FK0XG7B_.LOG',
'D:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\NEWDB\ONLINELOG\O1_MF_1_7FK0XHWB_.LOG'
) SIZE 50M,
GROUP 2 (
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_2_7FK0XKB8_.LOG',
'D:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\NEWDB\ONLINELOG\O1_MF_2_7FK0XM0Z_.LOG'
) SIZE 50M,
GROUP 3 (
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_3_7FK0XNOZ_.LOG',
'D:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\NEWDB\ONLINELOG\O1_MF_3_7FK0XOWB_.LOG'
) SIZE 50M
DATAFILE
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_SYSTEM_7FK0SKN0_.DBF',
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_SYSAUX_7FK0SKPG_.DBF',
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_UNDOTBS1_7FK0SKTC_.DBF',
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_USERS_7FK0SKWB_.DBF',
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_EXAMPLE_7FK0Z5LK_.DBF',
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\MARSH.DBF',
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\JOMARSH.DBF'
CHARACTER SET AL32UTF8
the control file path was registered in pfile also.
then i brought the database to nomount stage.
the problem is when i try to mount database it shows following error. anyone can help me to over come from this issue????????
SQL> startup pfile='D:\app\Administrator\product\11.1.0\db_1\database\INITnewdb.ora' nomount;
ORACLE instance started.
Total System Global Area 535662592 bytes
Fixed Size 1334380 bytes
Variable Size 301990804 bytes
Database Buffers 226492416 bytes
Redo Buffers 5844992 bytes
SQL> ALTER DATABASE MOUNT;
ALTER DATABASE MOUNT
ERROR at line 1:
ORA-00205: error in identifying control file, check alert log for more info
the alert massage is:
ORA-00210: cannot open the specified control file
ORA-00202: control file: 'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\CONTROLFILE\CONTROLFILE_01.CTL'
ORA-27048: skgfifi: file header information is invalid
OSD-04001: invalid logical block size (OS 1413563730)
Fri Dec 09 13:11:59 2011
Checker run found 1 new persistent data failures
ORA-205 signalled during: ALTER DATABASE MOUNT...
Thanks & Regards,
John Marshal.A
Edited by: 895689 on Dec 8, 2011 11:53 PM

CREATE CONTROLFILE SET DATABASE "NEWDB" NORESETLOGS ARCHIVELOGAlso when you are setting a new database, the option should be RESETLOGS and not NORESETLOGS.
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_2_7FK0XKB8_.LOG
D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_SYSTEM_7FK0SKN0_.DBFWhy underscore(_) at the end of the datafile name. Any specific reason ?

Win 8.1 Pro dism /Online /Cleanup-Image /RestoreHealth returns Error: 14098

I am running Windows 8.1 Pro and have recently been experiencing some odd behavior. This has lead me to discover that my component store is corrupt.
I have attempted to use sfc with no luck and have posted that on a separate thread.
When I attempt to use dism /online /cleanup-image /retorehealth, dism quickly comes back with Error: 14098.
Event the dism log looks corrupt. Below is just the beginning of the file. the not English character portion continues and is quite large:
[2580] Caller did not request sparse mount
[2580] Mounting new image.
Wim: [\\?\GLOBALROOT\device\harddisk1\partition1\Recovery\WindowsRE\Winre.wim]
Image Index: [1]
Mount Path: [C:\WINDOWS\TEMP\c18ce950-f10f-4afc-a811-28b1ffe5b733]
[2580] Wimserv process started for guid b3e8550e-9dd9-4246-855b-f0ac5d1c531f. Id is 956
[956] ImageUnmarshallHandle: Reconstituting wim at
\\?\GLOBALROOT\device\harddisk1\partition1\Recovery\WindowsRE\Winre.wim.
[956] Mounted image at C:\WINDOWS\TEMP\c18ce950-f10f-4afc-a811-28b1ffe5b733.
[2580] [0x8007007b] FIOReadFileIntoBuffer:(1415): The filename, directory name, or volume label syntax is incorrect.
[2580] [0xc142011c] UnmarshallImageHandleFromDirectory:(511)
[2580] [0xc142011c] WIMGetMountedImageHandle:(2568)
[2580] [0x8007007b] FIOReadFileIntoBuffer:(1415): The filename, directory name, or volume label syntax is incorrect.
[2580] [0xc142011c] UnmarshallImageHandleFromDirectory:(511)
[2580] [0xc142011c] WIMGetMountedImageHandle:(2568)
[2580] ImageUnmarshallHandle: Reconstituting wim at
\\?\GLOBALROOT\device\harddisk1\partition1\Recovery\WindowsRE\Winre.wim.
[2580] ImageUnmarshallHandle: Reconstituting wim at
\\?\GLOBALROOT\device\harddisk1\partition1\Recovery\WindowsRE\Winre.wim.
〲㌱ㄭⴰ㠱ㄠ㨵㘲〺ⰷ䔠牲牯††††††††䐠卉⁍†䥄䵓䐠楲敶⁲慍慮敧㩲倠䑉㤽㈵吠䑉㈽㠷‸慆汩摥琠⁯湩瑳污⁬桴⁥牤癩牥瀠捡慫敧✠㩃坜湩潤獷卜獹整㍭尲牄癩牥瑓牯履
Is partition1 the "System Reserved" partition? Could it be corrupted and if so, can it be repaired or rebuilt?
Any ideas or help would be greatly appreciated.
Thanks,
Glen

Honestly this is something MS should check into. There should be an easier way for users to implement this command rather then a complete dictionary to fix broken windows files. This is a Microsoft windows problem. I know for myself I had to use this command
quite often because I installed something windows did not like. Because of that window files became unusable. It would make practical sense for Microsoft to incorporate a feature that runs these commands in administration tools.
Run
Dism /Online /Cleanup-image/ScanHealth
if that runs an error then run
Dism /Online /Cleanup-Image /StartComponentCleanup
then run
dism /online /cleanup-image /retorehealth
http://technet.microsoft.com/en-us/library/dn251565.aspx
Edit: Microsoft has to make a serious decision. During setup, Metro, or desktop. Installing items in desktop mode is creating errors in Metro or windows store items. In future upgrades consider the flavors of OS, implement a users
choice. Desktop, Metro, or classic. Face the facts if you follow Linux method of desktop, and the install process. There is no confusion between desktops and we have a choice. This makes common sense. I like the feature of gnome or Ubunto it gives
the user a choice and a better picture for Microsoft. Lets face it, Bill Gates choose to hand over his business to people. This gave Bill Gates time to help other people that need help. How about Microsoft do the same and give people the choice between
desktops during install. Follow Bill Gates important roll in his life now. Bring some fairness and happiness to people that like Microsoft and what to help users get what they want and the best support they need. Doing this allows Microsoft the glory
to help people feel good about themselves. Sure MS can live in a dictatorship roll and continue to bully users to use the product, there is a consequence to this. Good young developers are working on a better OS and this is going to happen. It is better
to help people then to fight people.

I am taking courses online and the newer version of firefox 4.0 isn't compatible with the java, which I use on my web page. And I need to go back to the older version of 3.614. How do I reverse to what I had before?

I need to get another version of firefox other than 4.0. due to the version not compatible or is unknown to the java I'm using on my web for online classes.

You might try using the add-on 'NoSquint' which allows numerous zoom options specific to each page you visit & keeps your settings - https://addons.mozilla.org/en-US/firefox/addon/nosquint/
If you want to go back to 3.6x, you will find it here:
http://www.mozilla.com/en-US/firefox/all-older.html
In most cases you can simply "upgrade" (meaning downgrade) directly from the installation. It would be a good idea to save your passwords & bookmarks just to be on the safe side.

Online Porfolio

Similar Messages

Maybe you are looking for