Only one of my fans are working on my macbook pro retina 13 inch late 2013 model. Is something wrong?

It appears that only one of my fans are working on my macbook pro with retina display 13 inch late 2013 model. Is some thing wrong? if so how can i fix it?

To my knowledge there is only one fan on all 13" Mac notebooks, Retina or standard screen. Not enough space for a second fan and no Discrete GPU to cool.
So nothing is wrong.

Similar Messages

  • Macbook pro retina 13 late 2013, usb ports are intermittent with iPhone

    Macbook pro retina 13 late 2013, usb ports are intermittent with iPhone
    when i connect my iPhone 5 to the laptop it keeps connecting and disconnecting, I've had this problem since owning the macbook. change of cables makes no difference neither does which port i use.
    is there any advice anyone could give me?
    many thanks.

    Hello there Jake,
    It sounds like your phone is acting like you are connecting and disconnecing it over and over again even with another USB cable. I would use the troubleshooting in the following article to help you determine what the issue might be.
    iTunes: Resolve USB-related alerts
    See if the cable connection at the device or computer has come loose or unplugged.
    Unplug the cable you're using to connect your iOS device from the USB port on your computer, and then reconnect it. Then unplug it from your iOS device, and reconnect it.
    Remove any third-party battery packs or cases from the device and ensure that the USB cable is connected directly to the port on the device.
    If your Lightning or 30-pin cable is connected to a keyboard, display or USB hub, try plugging it directly into a USB port on the computer instead. 
    Close any virtualization apps (such as Parallels or VMWare).
    These apps may interfere with your computer's ability to communicate over USB if they aren't properly configured, or up to date. If this resolves the issue, contact the developer of the app to see if an update is available.
    Restart your computer.
    Restart your iPhone, iPad, or iPod touch.
    If your iOS device displays the Connect to iTunes screen, reset your device and then restore it.
    If you're using an accessory or third-party cable to connect your device, try using an Apple cable with the device instead.
    Update to the latest version of iTunes if you haven't already.
    Disconnect other USB devices from your computer, except for your keyboard and mouse. Then, reconnect your iOS device. If the issue is resolved, reconnect the other USB devices one at a time. Make sure your iOS device is still recognized by the computer after adding back each device. 
    If one of these steps resolves the issue, but it comes back later, make sure you haven't changed how the device is connected. For example, check to see if you plugged the device into a specific accessory, or used a specific cable that reintroduced the issue.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • WD My Passport drive works on old usb2 Macbook, but not on usb3 Macbook Pro Retina 13" Late 2013

    I have a 1TB WD My Passport drive that will not mount in finder or even appear in Disk Utilities in OSX Mavericks 10.9.1. It does however appear in System Report under the USB heading as My Passport 0748, but shows 480mb/sec speed rather than USB3 speed.
    It works on my old Macbook pro, which is a USB2 machine, perfectly well.
    Has anyone found a workaround to this? I have looked high and low for a solution but none has nailed it. Could it be a problem specifically with the USB 3 driver in OSX? Or maybe even the drive itself?
    Kind Regards
    Phil

    Here is my post on another Forum. My problem with the UI is now solved :
    hi there,
    same problem here. i had a mba 13" 2012 and wanted to switch to rmbp 13 because i need more real estate.
    i sold the mba on ebay, but had a few days to compare my rmbp and mba side by side. both with exactly the same software configuration and OS Mavericks.
    the mba was obviously snappier and i didn't know why.
    after reading tons of threads, exchanging the rmbp one time and being frustrated i discovered this thread.
    so i downloaded RDM, set the resolution to 1680x1050 (non-high-dpi!!!) and there it is, a snappy rmbp with mavericks.
    (for me real estate is more import than a shiny retina thinggy, but also i don't see a bit difference between 1680 hiDPI and 1680 "normal")
    i suspect the os isn't yet optimized, but i am far away from a software expert.
    here is the link for RDM:
    http://www.reddit.com/r/apple/commen..._resolution_to

  • Macbook Pro Retina 13" late 2013 My screen has developed vertical lines down the left hand side and they are multiplying

    Macbook Pro Retina 13"late 2013   2.4GHz Intel Core i5  8 GB 1600 MHz  DDR3  Intel Iris 1536MB  251 GB Flash.
    My screen has developed vertical lines down the left hand side yesterdays photo there is more today.

    You'd better make Genius Bar appointment to show them the problem.

  • In my macbook pro 15 inch mid 2012 model, my cpu and gpu will get very hot, when gaming or rendering sometimes over 200F. The fans only spin at max about 2900 rpm, when their max is 6400. I downloaded a fan control app, but how can i fix it?

    In my macbook pro 15 inch mid 2012 model, my cpu and gpu will get very hot, when gaming or rendering sometimes over 200F. The fans only spin at max about 2900 rpm, when their max is 6400. I downloaded a fan control app, but how can i fix it?

    Hi rhaughan,
    I see that you have concerns about your operating temperature of your computer while using resource-heavy applications such as gaming applications. I have an article that will address some of the concerns you have mentioned:
    Mac notebooks: Operating temperature - Apple Support
    http://support.apple.com/en-is/HT201640
    While there are third-party utilities that measure the temperature of a notebook computer, it is important to understand that these utilities are not measuring the external case temperature. The actual case temperature is much lower. Never use third-party applications to diagnose possible hardware issues—instead, contact Apple or go to an Apple Retail Store or Apple Authorized Service Provider.
    You should also see this article for even further information about your fans:
    Learn about the fans in your Mac - Apple Support
    http://support.apple.com/en-is/HT202179
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit.  Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help.  Currently I am running Version 3.0.4 (322).

    I need to know which update(s) I can apply to help stabalize the system.

    Typing the body of the thread message in the title, huh? -)
    I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit.  Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help.  Currently I am running Version 3.0.4 (322).
    Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
    Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out.  --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
    You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
    I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
    Mac 101: Using Windows on your Mac via Boot Camp
    https://support.apple.com/kb/HT1461
    http://www.apple.com/support/bootcamp/
    Helpful Apple Support Resources (Forum Overview)
    Boot Camp Support 
    Boot Camp Manuals
    Boot Camp 5.0 Drivers
    http://support.apple.com/kb/DL1638
    Frequently asked question
    http://support.apple.com/kb/HT4818
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
    http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
    http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
    http://support.apple.com/kb/HT4407
    The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
    https://support.apple.com/kb/HT4569
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
    Instructions for all features and settings.
    Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    http://www.apple.com/support/bootcamp/
    Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
    Yes, you can download the Boot Camp 5 Support Software here.
    http://support.apple.com/kb/DL1638
    How do I use the Boot Camp 5 Support Software I downloaded from the web page?
    The download file is a .zip file. Double click it to uncompress it.
    Double-click the Boot Camp disk image.
    Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
    Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
    Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
    When your system restarts your Windows 8 installation is done.
    Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
    How do I format USB media to the FAT file system?
    Use Disk Utility to format a disk to use with a Windows computer. Here's how:
    Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
    Open Disk Utility.
    Select the disk you want to format for use with Windows computers.
    Click Erase, and choose one of the following from the Format pop-up menu:
    If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
    If the size of the disk is over 32 GB, choose ExFAT.
    Type a name for the disk. The maximum length is 11 characters.
    Click the Erase button and then click Erase again.
    Which versions of Windows are supported with Boot Camp 5?
    64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

  • Fan like noise - Macbook Pro Retina 13 inch - late 2013 model

    If I open Frontline Commando (game app) my brandnew Mackbook pro make fan like noise. (annoying and scary) Could anyone advice please?
    my sys configuration:
    Model - Macbook Pro Retina 13 inch - late 2013 model
    RAM - 8 GB
    Processor - 2.4 GHz intel core i5
    OS - OS X 10.9.1

    Normal during gaming use, fan noise.
    A: you notice it more in a quiet room (the typical case) which is normal, all is AOK
    B: fuzz and dust has caked onto the blades causing the fan hub to get off balance and make a buzzing sound.
    C: fan rotor is going bad and making a whirring or buzz noise (rare).
    D: Fan is spinning up due to excess heat from gaming, heavy graphics gaming (typical, all is OK)
    A and D are normal
    B and C are not.

  • My Apple TV is not working with my Macbook pro 13 inch mountain lion after Apple TV upgrade?

    My Apple TV is not working with my Macbook pro 13 inch mountain lion OS X 10.8.2 after Apple TV upgrade?
    I am getting an error message as soon as I try to connect my Apple TV
    An error occurred (-6722) while connecting to the AirPlay device “Apple TV”
    it was working fine however after the upgrde it is giving me the above error message

    same here macbok air 2012 appletv 3 bugs the **** out of me
    it just stops randomly after a "while"

  • HT201295 My isight built in camera is only turning on for few second on my MacBook Pro (13-inch, Late 2011 ) when I use any camera needed app. Please help me.

    My isight built in camera is only turning on for few second on my MacBook Pro (13-inch, Late 2011 with osx Yosemite) when I use any camera needed app. Please help me. Its getting a little annoying.

    If restarting Mac or reinstalling OS X does not correct this symptom, you likely have a hardware problem.  Contact Apple Support or an Apple Authorized Service Provider for service.
    Message was edited by: EZ Jim
    Mac OSX 10.10.1

  • Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

    Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

    Yes, I too had this problem.
    I was issued an update from Apple for a new version software as well as a new version of Lightrooom and now it shows up on the desktop and in finder as it should.
    MacBook Pro Retina running 10.8.2 (12C54)
    Lightroom running 4.1
    Hope that helps.
    aa

  • Can anyone recommend a USB CF card reader that will work in my Macbook Pro Retina? My USB card readers for CF cards do not work

    At present, the only way I can load photos from a CF card to my new Macbook Pro Retina is by loading them onto an external hard drive via an old PC that can accept either of my USB card readers, then plugging the external hard drive into my MBP. Neither the USB card reader or the cable that comes with the Canon HDSLR camera will transfer photos directly to my MBP. I find it unbelievable that I have to go to a PC to load photos because I can't do it with my new MBP.
    Has anyone found a reliable USB CF card reader, or one that connects via thunderbolt or HDMI, at any price, that will work directly with the new MBP Retina?

    This is what we need:
    Location photoshoot - we use the Canon EOS 5D  Mk II still camera & the Canon FX100 pro camcorder.
    CF cards are: SanDisk Extreme UDMA & SanDisk Extreme Pro UDMA 6 for video (I think they are both Type II) My Mac recognises them both as FAT 32 format
    My MBPRetina is on the latest version of Mountain Lion OSX 10.83
    the files from the camcorder will transfer to my MacBook Pro Retina directly via the camera's cable but it is quite slow & it means I cannot continue to film while downloading files but this we can live with.
    the files from the still camera Canon EOS 5D  Mk II will not transfer directly via the camera's cable - have yet to get the Canon software to download, but via the camera's cable will not help anyway as we need to have the still camera free to keep shooting.
    We need to be able to take out the CF card from the first part of the shoot & download the still shots while just on the Macbook's battery power, while we insert a fresh CF card back into the still camera to continue with the next part of the shoot simultaneously (while the first card is downloading.)
    The files from the first part of the shoot will be both in RAW (.CR2) & Jpeg format. We just need to quickly transfer the jpegs, then I do a quick sort, batch the best ones as black/white images, & use these in a client slideshow immediately after part 2 of the shoot.
    Obviously we need fast data transfer speeds, & rely on the MBP's battery power while on a location shoot.
    The card readers I have tried are an older specific CF card reader branded as Palm, & a USB 2 multi card reader branded as Travel Flash. With both readers, the lights on the readers flash on & off, & the MBP recognises the card & the files will even appear both in Finder & in i-Photo, so it starts importing, then aborts with an error message saying:
    'The Finder can’t complete the operation because some data in “” can’t be read or written.
    (Error code -36)'
    & another message saying:
    'the disk was not ejected properly'.
    So it appears the MBP does read the CF cards but the card readers don't stay connected, no matter what angle I put them on or however many times I re-connect them.
    Yes, they are probably cheap & I want to buy a decent one.
    So, in summary:
    the card reader needs to work when the MBPR is only on battery power (I read in some forums that some USB card readers aren't so reliable on the laptop's battery power)
    the card reader needs to be quite fast. I have read the USB 3 readers won't read CF cards at higher than USB 2 speeds. Is this true? Are the firewire connected ones faster, & if so, are they still reliable on the MBP's battery power?
    From research, it appears my problem is associated with my specific model of Mac & platform, being MacBook Retina on Mountain Lion OSX Version 10.83. If any of the recommended card readers have been successful with this, plese let me know.
    Thanks heaps for the suggestions so far.

  • Will an Infra-Red Adapter work with a macbook pro retina display so I can use the apple TV remote for presentations?

    I have always used the apple TV remote for my presentations.  I bought a retina display last year for the betterment of my presentations and now I have to stand near my computer and hit a button to change my slides where as before I used my remote.  Will a infra-red adapter work with the apple TV remote in the macbook pro retina display?  Love my computer, but very disappointed not to have a remote for presentations that does not need the internet.  Does anyone have any ideas?

    Yes, I used that and it works great if you have wireless connection.  Im looking for  a remote that worked like the apple TV remote.  My questions is, "Is there a USB infra-red remote that works with mac.  I have found this one: Keyspan EZ1 easy presenter.  It claims with works with PC and Mac and the reviews are good.  Does anyone know anything about it or if it works with retina display macs?

  • Photos on sites are blurry on the Macbook Pro Retina Display?

    I just got a Macbook Pro Retina Display and while browsing I noticed that logos and photos on sites looked blurry. this is something that really bothers me in the fact that I'm a design and photography student.. i dont know if i should return it and get the old macbook pro or what...

    Give the world time. Resolutions above 2560x1600 are only meant for the 30" cinema display I am using right now, and the rest of the world does not have resolution suited for displays above 200ppi below 30". But, you are a photographer, so am I, and the Retina Display is beautiful at high res content including DSLRs and film scans.

  • My microsoft office 2011 for mac has stopped working on my macbook pro retina please help!!!

    I have 10.8.2 running on my macbook pro retina 15' and suddenly microsoft office wont work on it and i have no clue as to what it is. can someone pleaseshed some light onto what the issue could be?

    I have the exact same problem.  I started having the problem with MS Office 2008 after I installed a new harddrive in my imac (24-inch, Early 2009), OS X 10.8.4.  Everything was working fine and then when I try to open any Office app, the icon bounces in the dock, and nothing happens.
    I as searched for solutions, the obvious fix was to uninstall office (even all of the excess system files it leaves even after an uninstall).  When I a re-install Office 2008, it works for about 1 week and then it stops working again.
    Next I thought to try the new version of Office (Office 2011), so I did the trial download, and sure enough got the same problem.  After about 2 weeks, it stopped responding.  I have talked to MS support about this problem, and their suggestion was to uninstall and then reinstall, which I am becoming an expert at.
    I am also having an issue with Apple Mail and contacts becoming disconnected.  When created a new mail, typing in the receiptant does not pull up their email address even though it is in my address book.  The fix for this, which I do even other day is to delete a system folder in Library/Containers/com.apple.mail.  I do that, and it works for a few days.
    Any suggestions would be great.

  • Power button and voice control buttons won't work on my macbook pro retina

    I found that my power and voice control buttons won't work on my new Macbook pro retina. I can't shut it down or restart it in any way. And Im afraid if I force to shut it down I can't turn on it cuz the power button won't work. What should I do? Any idea???

    Please read this whole message before doing anything.
    Back up all data.
    Quit Facetime and  Messages if either is running.
    Step 1
    Hold down the option key and select
    Go ▹ Library
    from the Finder menu bar. Move the following item from the Library folder to the Trash (either may not exist):
    Caches/com.apple.imfoundation.IMRemoteURLConnectionAgent
    Leave the Library folder open. Log out and log back in. Try the applications again. If they work now, stop here. Close the Library folder.
    Step 2
    If you still have problems, quit again. In the Preferences subfolder, there may be several files having names that begin with any of the following strings:
    com.apple.imdsmsrecordstore
    com.apple.imservice
    Move them all to the Trash. There may also be a file with the name "com.apple.imagent.plist". Move that to the Trash too.
    Also in the Preferences folder, there's a subfolder named "ByHost". Open it and do the same thing.
    Log out and log back in. Test again.

Maybe you are looking for