Only one receiver in local communication via socket

I am simulating a network of 4 nodes that exchange messages between each other on localhost.
Each node has two threads: Sender thread and Receiver thread that use DatagramSocket for communications:
For the Sender socket:
DatagramSocket sock_sender = new DatagramSocket(null);
          sock_sender.setReuseAddress(true);
DatagramPacket dp = new DatagramPacket(buffer, buffer.length,
                         InetAddress.getByName("localhost"), PortA);
Now for the receiver socket,
DatagramSocket sock_recev = new DatagramSocket(null);
          sock_recev.setReuseAddress(true);
          sock_recev.bind( new InetSocketAddress (InetAddress.getByName("localhost"),PortA)
To conclude, I have multiple receivers that listen to the same remote port.
The issue now is that only one node can receive data from other sender processes!
Is there any idea about the reason of this issue and how to process to avoid it?

If they all use the same address and port all the receivers should see the same packets, including their own.
Have you considered using a multicast address?

Similar Messages

  • Only ONE external hd shows up via my airport extreme.

      I have them both plugged into a powered usb hub, and that connected to the back of the airport extreme.
    Only one hd will show up. . . any ideas???
    Thanks so much for the help.

    Yes, I did format both drives with Mac OS Extended (Journaled).
    I can see drive A if it's plugged in by itself, or I can see drive B if IT's plugged in by itself, but I can only see one if both are plugged into the powered usb hub.???
    Any other ideas? 
    Thank you so much for the response.

  • Synchron communication via Socket

    Hi everyone,
    Is there a way to make TCP Sockets communicate in a synchron manner?
    I mean, I send a message over a socket and be blocked until I receive
    the answer.
    (PS: I don't want to use any other API (like RMI, or JMS or etc etc).
    I ask, whether the Socket implementation in java.net package can do
    this implicitly.)
    Thank you very much

    No no, this is not a ServerSocket anyway. Assume there is just
    one Socket that is already connected.
    I send a message, i.e. I call for example
    outputstream.println("....");
    where 'outputstream' is the Stream that I obtained using my socket.
    Normally my code continues to run after that line. If I expect
    an answer, I receive it via an "response from the other side- event".
    But for example consider RMI. If I call a method of a remote object,
    Object o = remoteobj.aMethod();
    then my thread is blocked until I receive a response from the
    remoteobj. I do not have to listen to an additional event, everything
    is done synchronously.
    I want to do the same thing as RMI with my socket (outputstream).
    I want my code to be blocked until I receive an answer from the
    other side.
    That was my question.
    Best Regards
    I mean, I send a message over a socket and beblocked
    until I receive
    the answer.Do you mean by being blocked you do not have a socket
    listening anymore to make additional connections?

  • Work Items to PR Agents (Only one of two agents received)

    Dear all,
    I am facing a problem like this:
    In my PR Workflow, the task TS00007986 is assigned agents by position. There is one position applied for a particular release strategy and there are two agents under this position.
    Now, there is one PR created, it went to the correct release strategy and thus sent to the correct agent. However, only one of the agent is receiving that work item while the other don't. In another words, instead of sending to both the agents, only one received.
    In SWEL, the possible agents are showing both agents' names, but the icon "In User's Inbox" is only appearing on one of the agent.
    I would like to know, what would be the possible error for this and in such cases, how could I trace the errors?
    Thank you very much in all advances.

    Here's an update on this issue:
    For example, the two agents are Agent A and Agent B.
    I think Agent A and Agent B both received the work items. However, Agent A executed the work item but later canceled the action without processing the work item (approved or rejected the PR). When Agent A executed the work item, the same work item would be removed from Agent B's inbox, but it is still in Agent A's inbox.
    The problem is, the work item has yet to be processed. In this case, how this issue should be solved (only processed work item is removed from all the agents' inbox)?
    Thank you very much.

  • Two senders and One receiver for File to SOAP scenario

    Dear Friends,
    I got a new requirement like we have a to different ECC systems from there they will send the Two different Files to XI, XI will send the same file to receiver, but we have only one receiver.
    for soap adapter purpose they provided only one webservice url.
    Please suggest me how to do multiple senders and single receiver.
    Regards,
    Shalini Shah

    >
    shalini shah wrote:
    > Dear Madhu,
    >
    > I am receiving the files from two different ECC servers.
    > ECC1 will send the files at different time
    > ECC2 will send the files at different time
    > but receiver webservice is only one .
    > two sender Communication channels are required for pointing to two different ECC servers and one receiver CC is for receiver purpsoe.
    >
    >
    > Regards,
    > Shaini Shah
    BPM ....not possible to collect the messages otherwise!

  • Why pick only one retailer in Canada ?

    I'm very interested in picking up a U110, but for some very strange reason Lenovo Canada has chosen Tiger Direct as their only Canadian retailer.
    Tiger Direct doesn't actually carry any of these in stock at their stores. For this particular item they are no different than any online-only retailer.
    The price that they are charging is not inline with what Lenovo US is charging. Lenovo US is charging $1,799.00 USD, but Tiger Direct is charging $ 2,378.99 CDN.  With the current exchange rate, they should be charging roughly $1,817.99 CDN.
    Not only that, but Lenovo US has dropped their price recently but Tiger Direct won't budge.
    The question is why did Lenovo not pick multiple, or at the very least, larger retailers to sell this through, like Future Shop or Best Buy ? Why are they not selling through Lenovo Canada ?

     Hi,
    Buy the U110 from www.jr.com, they have the right price and they are the only ones who ship to Canada via UPS Express and all you have to pay GST+PST when your item arrives in Canada. Unfortunately our government charges too much taxes, that one of the many things I don't like about Canada. Many states in the US have no taxes, u know?
    I recently bought the Idea Pad Y510-D2 from www.jr.com and this one has the wifi abgn+bluetooth and also has the nvidia 8600M GT graphics card.
    So, do urself a favour forget tigerdirect and buy from www.jr.com, for future purchases use www.ncix.com or www.directcanada.com, they are located in BC and only charge GST + they ship Express for as minimum as $15, item arrives next day. They also beat prices.

  • On my 90 day old MacBook Pro I can't send or receive (Mobile Me) email via "Mail."  The fetch icon keeps spinning.  Any help would be greatly appreciated.  I'm only one day past the free Apple care.  Thanks!

    On my 90 day old MacBook Pro I can't send or receive (Mobile Me) email via "Mail."  The fetch icon keeps spinning.  Any help would be greatly appreciated.  I'm able to receive Mobile Me emails on my iphone or via the web, but just not on the laptop.  I'm only one day past the free Apple care:(
    Thanks!

    glippert wrote:
    Tkx, tjk...I tried calling Apple Care and they directed me to the forums... 
    I guess that's their right at one second past midnight on the 91st day.
    Here's the link to the MobileMe support forums; I'd post there:
    https://discussions.apple.com/community/mobileme

  • Need to use only one sender and receiver communication channel.

    Hello Experts.
    I have a scenario where in I have to use only one sender and receiver communication channel to push files from different source directories to different receiver directories.
    For Eg;
    Sender                              
    D://dir1/file1 --->                  E://dir1/File1
    F://dir2/file2 ---->                 G://dir2/file2
    H://dir3/file3----->                 I://dir3/file3.
    Can this be achieved by using pass through scenario?
    Please let me know if the requirement is not clear.     
    Thanks in advance.
    Advit Ramesh

    Hi Advit,
    I think it is possible. You have to use the Advanced Selection for Source file in the sender channel to define multiple files to be picked up. Also, the Dynamic configuration must also be enabled and used in the mapping so you can manipulate the target directory and target file name based on your source files.
    For Polling from multiple directories:
    http://wiki.scn.sap.com/wiki/display/XI/File+Sender+Adapter+-+Polling+Multiple+Directories
    Dynamic Configuration:
    Dynamic file name and directory in Receiver File Adapter - summary of possibilities - Process Integration - SCN Wiki

  • Send and receive e-mails to/from only one mailbox

    Hello,
    i wanted to know is it possible to allow one recipient to send to only one recipient and to receive only e-mails from same recipient ? 
    Thanks,
    John

    Hi John,
    Great commands from Philip.
    We can also create transport rules via EMC.
    Found a similar thread for your reference:
    Transport Rule allow user to send to only 10 user
    http://social.technet.microsoft.com/Forums/en-US/06d88574-d67d-483d-9abe-fe5e3f8bc41b/transport-rule-allow-user-to-send-to-only-10-user
    Hope it is helpful
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Only one agent does not receive call on queue

    Hi team,
    I have a CCx Express 7.x working properly.
    There are some queue configured, but in a queue I ´m with the follow problem:
    - Everybody can answer the incoming calls, but only one agent is not receiving the incoming calls via trigger;
    - The agent stay in ready state, but the calling hear "Every our agents are busy";
    The same agent can forward e answer the calls, if the call does not use the CCX trigger.
    Can you help me please?
    thanks

    Hi Jean,
    If the Agent belongs to CSQ\Resource group and be in Ready state, don't get calls from the Queue (Longest Available) is little surprise.
    If this is the only Agent in Ready state, other Agents in this CSQ are forced to go to not_ready state, will he still not get calls?
    What is the number of sessions associated with the Application and with the Route point? what is maximum count of callers to this application and Agents belonging to this CSQ ?
    Thanks,
    Anand

  • I am running ios7 and cannot send pictures via iMessage to only one contact but they can send me pictures. What is going on?

    I am having issues sending pictures via iMessage to only one of my contacts. They can send me pictures through iMessage so why are mine coming back undelivered?

    Have managed to get it working.
    It might be as simple as switching the other phone completely off, and resetting it...
    I say this because I have no idea how I finally managed to get it working again.  I tried so many things.  Removing all the iMessage addresses.  Sending messages from the computer, iPad...etc and found that the weakest link was my wife's phone. It wasn't receiving iMessage pictures from ANYONE (not just me).  That allowed me to narrow down the possibilities somewhat.
    Let me know if simply resetting the other person's phone fixes the problem.
    Rob

  • My HP Officejet 8500a All-In-One forwards faxes (as a tiff file) to my iphone.  Can only view/receive 1st page, embedded into email as a non-attachment.  Iphone receives email(s) pdf attachments well.  What can I do?

    My HP Officejet 8500a All-In-One forwards faxes (as a tiff file) to my iphone.  Can only view/receive 1st page, embedded into email as a non-attachment.  Iphone receives email(s) pdf attachments well.  What can I do?

    Try this app
    http://itunes.apple.com/us/app/fax-reader/id406902152?mt=8

  • HT204350 Hey, migration from an old mac late 2008 aluminium to a brand new mac book air. Only the new one has firewire. Transmissiom via wifi estimates ~50h. Is there a faster Way to sync? Tanks in advance

    Hey, migration from an old mac late 2008 aluminium to a brand new mac book air. Only the new one has firewire. Transmissiom via wifi estimates ~50h. Is there a faster Way to sync? Tanks in advance

    I'll venture that your problem here is that you're using two very different versions of Mac OS X.  The USB adapter has been useful to me when making big downloads or while using other networks, but it might not be your case. 
    Here's what I would advise, though it may be less than stellar:  Copy the files you need into folders and move them through a USB flash drive or using that external hard drive of yours. (Could the format be the reason your MBA can't see it?). Some stuff like calendars and contacts can be exported too. At least in Lion, I haven't used Tiger in a while. 
    Good luck.

  • HT4623 My texts have stopped getting through to one of my contacts. I can phone him and I can receive his calls and messages. I am the only one of his contacts whose  texts are not getting through. We have both restarted our iphones but the problem contin

    My texts have stoipped getting through to one of my contacts. I can phone him and I can receive his calls and messages. I am the only one of his contacts whose  texts are not getting through. We have both restarted our iphones but the problem continues.

    Have you talked to your carrier (or your friend to his)?  Could be an issue at their end.

  • WIP according local GAAP vs IFRS - only one result analysis key

    Dear experts,
    I am faced with the following issue. We use WBS-elements for long running activities. We set result analysis key on WBS-element for periodic WIP calculation. The actual result analysis key is set up according local GAAP.
    Now we want to implement parallel accounting according IFRS. Here we can use percentage of completion for valuation of our project(s).
    How can we handle two methods of WIP calculation? We can only set one resulat analysis key on WBS element?
    How do you handle this issue.
    Thanks for your reply in advance
    Regards,
    Butch

    Thanks for the quick feedback.
    Maybe some additional information:
    01 - IFRS (real time link with FI)
    02 parallell currency deprec area
    20 - LOCAL GAAP
    50 - Grants IFRS value (investment measure support area)  linked realtime to FI
    51 parallel currency deprec area of 50
    60 - Grants Local GAAP
    I already checked the SAP library and the SDN forum, but could not find anywhere how to set up the depreciation area(Grants LOCAL GAAP) to which the investment measure is not directly linked to (not the support area (50) in Tr ANVEST).
    Is it possible with only one investement key to fill the IFRS (50) & Local GAAP (60) value investment depreciation area and still depreciate them in different ways?
    Thanks again!
    Kr,
    Roeland

Maybe you are looking for

  • Prevent creation of duplicate material master record

    Hi Experts 1)  Is there any control or validation to prevent creation of duplicate material? I mean, if the description of new material is 100% or 95% matching with an existing material, there should be a validation. 2) Is there any feature of usage

  • 'Created by' column in SM37 contains inactive users - audit issue?

    Hi, Most of the jobs in sm37 in our systems have been created by staff who had already left. So under the 'created by' column in SM37 we can see jobs running under users who have been locked/deleted. But it's only the 'created by' column. All the 'st

  • How to buil a circular buffer of message

    Hi, I have a GPS that sends me their information every 30 seconds, I'm receiving this information for the serial port and I should send this information by another serial port, but every 90 seconds or more, the transfer time is variable according to

  • Parent-- Child result set required

    Hi Friends, I have below table TableA ParentColumn ChildColumn 1 abc 1 efg 1 ijk 1 lmn 2 aaa 2 bbb 3 xxx 3 ggg and I am looking for below result set. SomeColumnName 1 abc efg ijk lmn 2 aaa bbb 3 xxx ggg Please help me achieve this goal. THanks in adv

  • Anamorphic project for use in iDVD

    I created an anamorphic SD video in FC Pro and want to export it for iDVD for a quick check. Do I export it as QuickTime Movie 720 x 405 px or 1024 x 576 px ? Or is there any other way to get the 16:9 ratio in iDVD?