Ons.log getting too many and too large

Hi,
Just recently when I tried to connect to our staging database I found that I couldn't connect and it gave me the "disk is full" error. It was quite amazing because the archive logs were not large nor were their any backups on it. And it was a 200g disk partition. After doing some research we found out the the ons logs were the problem. There was probably like 40 or so log files and each was a gig and a half in size. My question is what causes these logs to be created and how can we manage them. Because we have development environment and it was setup exactly the same way as the staging, but we never had a problem like that on it (dev). How can we turn the logging off?
Thank you.

Take a look on thi Metalink Notes
Doc-ID: 284602.1

Similar Messages

Console error messages too many and too often

Not sure where to submit this. The messages:
11/14/07 5:34:08 PM com.apple.SystemStarter[28] The process has forked and you cannot use this CoreFoundation functionality safely. You MUST exec().
11/14/07 5:34:08 PM com.apple.SystemStarter[28] Break on _THE_PROCESS_HAS_FORKED_AND_YOU_CANNOT_USE_THIS_COREFOUNDATION_FUNCTIONALITY___Y OU_MUST_EXEC_() to debug.
Keep appearing over and over in the Console logs, about 50 times a second. Any ideas?

Check out this thread: Console error message every few seconds - com.apple.SystemStarter[30]
Hope this helps....

How do you sync contacts with gmail, not other place on computer? I don't know where the contacts came from on that are now on my new phone. There are way too many and it is not my list of contacts I have on gmail. Where else is this from?

I don't know where the contacts came from on that are now on my new phone. There are way too many and it is not my list of contacts I have on gmail. Where else is this from? I spent a LONG time on gmail going through my list of contacts. There were about 400 and I got it down to about 90. When I went to sync my new phone, ALL 400 synced.
Thank you for any help!

Sorry for the repeat...new here. OBVIOUSLY.

I want ro remove all of the default Firefox bookmarks. There are way too many and none of which are usefull to me. I would like to make my old IE Favorites folder the default. How can I do this?

I need to remove the default Firefox bookmarks.
There are way too many and none of which are usefull to me.
Also, I am vision impaired and reading through such a long list is very eye-fatigueing to me.
I would like to make my old IE Favorites folder the default. How can I do this?

Did you import an iPhoto Library from the old Hard Drive? Do you still have that old Library?
The way to clear out a Library is to Export the photos - Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
For the annoying start-up message:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Import' or 'Importing'.
Drag it to the Desktop. *Make no other changes*.
Start iPhoto. Does that help?
If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.

Photo correction: too light and too dark

I have imported ~ 2,000 photos into Lightroom 5.6. The files are PNG format from MS Picture It. Some photos are too light and some are too dark.
I tried synchronizing the metadata thinking this would make the photos more alike. Some are improved, but I still have many that are too light or too dark.
Short of editing each photo, is there an easy way to make the photos more uniform in brightness.
Thanks

Try using Quick Develop in the Library where the adjustments are relative.
For example the inner pair of arrows for highlights or whites adds or subtracts in increments of 5 and the outer arrows in increments of 20. You can see the changes in the history panel by then going into Develop.
So rather than using sync in the Develop module which applies the same absolute setting to every image the changes in quick develop will be relative to the original condition of the photo.
Try experimenting by selecting a batch of thumbnails and applying Quick Develop settings.
Alternatively sort your images into batches using collections where the original lighting is broadly similar. Then select all (Ctrl+A) in each collection and apply the adjustments to each batch, until you get everything broadly similar.

Log file is growing too big and too quick on ECC6 EHP4 system

Hello there,
i have ECC6EHP6 system based on NW 7.01 and MSSQL as back-end.
My log file is growing very fast. i seen a number of threads but does not got some perfect idea what to do. Please see DEV_RFC0 and DEV_W0 log file excerpt below. Please help
DEV_RFC0
Trace file opened at 20100618 065308 Eastern Daylight Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLSADC (Transaction: )
User: DDIC (Client: 000)
Destination: SAPDB_DBM_DAEMON (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 59356166, {ADC77ADF-C575-F1CC-B797-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLSADC)
SERVER> Called function module: DBM_CONNECT_PUR
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =SAPDB_DBM_DAEMON
HOST =%%RFCSERVER%%
PROG =dbmrfc@sapdb
Trace file opened at 20100618 065634 Eastern Daylight Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLSADC (Transaction: )
User: DDIC (Client: 000)
Destination: SAPDB_DBM_DAEMON (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 59587535, {28C87ADF-4577-F16D-B797-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLSADC)
SERVER> Called function module: DBM_CONNECT_PUR
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =SAPDB_DBM_DAEMON
HOST =%%RFCSERVER%%
PROG =dbmrfc@sapdb
DEV_W0
X
X Fri Jun 18 18:05:15 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
N
N Fri Jun 18 18:05:25 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
X
X Fri Jun 18 18:05:39 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X
X Fri Jun 18 18:05:46 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X
X Fri Jun 18 18:05:52 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X
N Sun Jun 20 10:55:32 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
X
X Sun Jun 20 11:00:02 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
N
N Sun Jun 20 11:00:32 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
C
C Sun Jun 20 11:03:34 2010
C Thread ID:1956
C dbmssslib.dll patch info
C    patchlevel   0
C    patchno      13
C    patchcomment Errors when running with par_stmt_prepare set to zero (1253696)
C Local connection used on SAPFIVE to named instance: np:SAPFIVE\ECT
C
C Sun Jun 20 11:03:49 2010
C OpenOledbConnection: line 23839. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err -1, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err -1, sev 0), SQL Network Interfaces: Server doesn't support requested protocol [xFFFFFFFF].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C
C Sun Jun 20 11:04:04 2010
C OpenOledbConnection: line 23839. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err -1, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err -1, sev 0), SQL Network Interfaces: Server doesn't support requested protocol [xFFFFFFFF].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C
C Sun Jun 20 11:04:19 2010
C OpenOledbConnection: line 23839. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err -1, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err -1, sev 0), SQL Network Interfaces: Server doesn't support requested protocol [xFFFFFFFF].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn to np:SAPFIVE\ECT.
C Retrying without protocol specifier: SAPFIVE\ECT
C Connected to db server : [SAPFIVE\ECT] server_used : [SAPFIVE\ECT], dbname: ECT, dbuser: ect
C pn_id:SAPFIVE_ECT_ECTECT_ECT
B Connection 4 opened (DBSL handle 2)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       YES YES NO 000 255 255 20100618 061458 SAPFIVE\ECT
B 000 001 +DBO+0050      000002156 INACTIVE     NO NO NO 004 255 255 20100618 101017 SAPFIVE\ECT
B 000 002 +DBO+0050      000001981 DISCONNECTED NO NO NO 000 255 255 20100620 070023 SAPFIVE\ECT
B 000 003 +DBO+0050      000001982 DISCONNECTED NO NO NO 000 255 255 20100620 070023 SAPFIVE\ECT
B 000 004 R/3*INACT_PACK   000002157 ACTIVE       NO NO NO 004 255 255 20100620 110334 SAPFIVE\ECT
N Sun Jun 20 17:35:35 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
M
M Sun Jun 20 17:47:29 2010
M ThAlarmHandler (1)
M ThAlarmHandler (1)
M ThAlarmHandler: set CONTROL_TIMEOUT/DP_CONTROL_JAVA_EXIT and break sql
C
C Sun Jun 20 17:47:33 2010
C SQLBREAK: DBSL_CMD_SQLBREAK: CbOnCancel was not set. rc: 15
M program canceled
M    reason   = max run time exceeded
M    user     = SAPSYS
M    client   = 000
M    terminal =
M    report   = SAPMSSY2
M ThAlarmHandler: return from signal handler
A
A Sun Jun 20 17:48:33 2010
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Sun Jun 20 17:48:42 2010
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP_BEG entered.
A ** RABAX: level LEV_RX_WRITE_SNAP_BEG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A
A Sun Jun 20 17:48:48 2010
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_WRITE_SNAP_END entered.
A ** RABAX: level LEV_RX_WRITE_SNAP_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Sun Jun 20 17:48:48 2010
A
A ABAP Program SAPMSSY2                                .
A Source RSBTCTRC                                 Line 131.
A Error Code TIME_OUT.
A Module $Id: //bas/701_REL/src/krn/runt/abinit.c#1 $ SAP.
A Function ab_chstat Line 1941.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A Time limit exceeded..
A
X
X Sun Jun 20 17:49:03 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
N Sun Jun 20 18:35:40 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
N
N Sun Jun 20 18:50:35 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
N
N Sun Jun 20 18:55:31 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
N
N Sun Jun 20 19:00:31 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
X
X Sun Jun 20 19:01:59 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X
X Sun Jun 20 19:02:05 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
M
M Sun Jun 20 19:04:02 2010
M ***LOG R49=> ThReceive, CPIC-Error (020223) [thxxhead.c   7488]
M ***LOG R5A=> ThReceive, CPIC-Error (76495728) [thxxhead.c   7493]
M ***LOG R64=> ThReceive, CPIC-Error ( CMSEND(SAP)) [thxxhead.c   7498]
N
N Sun Jun 20 19:05:31 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
Thanks
Mani

i have few BG jobs running at backend, but i dont think that could be a problem. I have these jobs running
ESH_IX_PROCESS_CP_20100621051308
EU_PUT
EU_REORG
RPTMC_CREATE_CHANGEPOINT_AUTH
i cancelled the last one and first job is for trex indexing for changed object i SAP hR master data. middle two i dont know the purpose.
do you think these could be problem?
Mani

How do i delete some of my saved bookmarks. I have too many and want to clean them up.

I have gone crazy bookmarking so many websites and have noticed that there are some I rarely use. I would like to do 2 things. One, i would like to delete some of them, and two, I would like to rearrange the most populare to the first drop down. Is this possible?

See also:
* https://support.mozilla.com/kb/Sorting+bookmarks
* http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox

Photo sync problem...too many, and copied.

Hi,my 1st post....having a problem with my 3gs with the photos and not sure it is fixable...here goes..
On itunes, click on my phone..over to photos....says "sync photos from"...then tick in the box "pictures"...
Box underneath with all the folders...ive ticked the boxes of what folders i want....all is good.
When i use my phone,the photo library is 2662 photos,my whole library....THEN all the sub folders what ive ticked AS WELL,,,,another 2000+ photos...i dont want the photo library as its taking up loads of space on the phone,i just want the sub folders.....but cant delete it (photo library)
If you understand that then,any ideas...thanks for any help.
Message was edited by: philevo6

Sorry, but your problem is not anywhere close to the OP's question, not in the same ballpark. The OP's question isn't a problem for starters.
I have not seen your problem reported here. I've haven't seen anyone report all photos on their computer are optimized for viewing on their iPhone as part of the iTunes sync/transfer process that are not selected to be transferred to their iPhone.
Try deselecting Sync Photos under the Photos tab for your iPhone sync preferences with iTunes followed by a sync. This should remove all photos on your iPhone that were transferred from your computer. Follow this by reselecting Sync Photos and the folders or albums you want transferred to your iPhone followed by a sync.
If no change after this, you may need to delete the iPod Photo Cache on your Mac followed by another sync. This will require all photos selected to be transferred to your iPhone being re-optimized for viewing on your iPhone with a new iPod Photo Cache for the photos transferred to your iPhone being re-created.

The ink is too heavy and too wet on the photos.

The printer is an HP PHotosmart C8180. I am using HP advanced photo paper and HP ink. I have cleaned the printhead twice and all ink levels are good. Photos printed two days ago were good. I have the settings on 4x6 boarderless, the paper type HP advanced photo paper. Would really appreciate some help. Thanks

Hello GirlK,
Welcome to the HP Forums.
I see that you are having an issue with the ink being too heavy or still wet on the photos.
Here is a document that deals with the issues you are having as well as a few extra steps. Please click the following link on
Ink Smears or Is Sticky on Printed Photo.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Too many movies-too long to publish

Ok, I am probably doing this all wrong so I think I need help. I have used Imovie and IDVD in the past to make a short DVD with about 10 videos on it. However now I am trying to transfer all our movies to DVD because my 3 yr old son really wants to watch them on our big tv and some of my family wants home videos. I have organized all the videos & clips into projects and if I am reading everything right I first have to prepare every project for sharing before I can use them in IDVD and burn them to a disk. Is this correct? Is there a faster way to prepare the movies because at this rate it takes 20 min to prepare each project and I think I have about 75-150 projects, so I wont be done preparing the projects til sometime next year Can anyone help me expedite this process????

DSfilms5 wrote:
I use iMovie. A lot. It will take more than a ew seconds. He should choose the ones he really wants.
I use iMovie since vers2. Was a betatester for a while …
the presets in iM-b use h264 as export codec - which is not needed for furtherr processing AND is a time-consuming process, compared to the one I recommended.
cncstory asks for a fast workflow - mine is fastest.
It just copies the timeline - your harddrive limits the speed, no CPU time involved.
try yourself .....
-bye-

Video Import Problems - Too Many Thumbnails, Too Fast Playback

I have a Sony (Digital 8) connected to my new iMac via Firewire. When I try to capture the video, it appears that iMovie is creating a separate thumbnail clip per every second of video, so I end up with 1000s of thumbnails. I was able to capture video fine a couple months ago so I'm not sure what changed (software update?). Also, when I play back, it plays at twice the speed. I've scoured the internet and have found similar-but-not-exact posts, but NO solution. Any advice would be greatly appreciated. Thanks!!

Sorry! I was thinking of iMovie HD 6 - the previous version to iMovie '08 - in which you can choose what kind of new project to create, thus:
..note that it offers 'HDV 720p' as an option (..beneath 'DV').
But, somehow your import is presenting itself to iMovie '08 with - it seems - only 1 field per frame ..hence it's playing twice as fast as it should, and you've got all those extra thumbnails, as if every frame (..or, as you say, every second of playing time..) is a separate clip.
Erm ..I wonder if the internal clock had stopped in your camcorder, so that every shot has the exact same date and time stamp. In that case - noooo-oo-oo ..then iMovie would fail to recognise individual clips, instead of treating every second as an extra clip.
I have had a similar thing happen with a fairly old (1999) miniDV tape: when importing into iM'08 I got lots and LOTS of separate clips instead of one continuous clip. That was caused by the tape being old, perhaps badly wound onto the spool ..certainly not having been fast-forwarded and then rewound each year as ought to have been done, to prevent magnetic "print through" and physical pinching, etc, on the spool.
Camcorders - especially Sonys - have circuitry inside them to disguise bad tape replay: if a field or frame is missing, the camcorder can 'regenerate' it by playing the previous field or frame again ..the human eye doesn't really notice this fakery. But that is NOT done when the signal's played out along the digital FireWire link: if the tape's bad, then a faulty signal arrives at the other end ..in this case apparently at your Mac, or at iMovie.
Try winding and rewinding the tape a few times, and/or playing it through, and then trying to import it. ..Is that any better?

Calendar alert sonud - Too short and too weak

I just bought a new iPhone 4.
I transfered all my appointments.
I am missing my appointments because I do not hear the very short, low sound alert from my iPhone.
What can I do?
Thanks
Ron

Welcome to the discussions,
if your volume settings are set to max and you are using the reminder function prior to your appointment already, there is not much you can do.
Maybe check the App Store for some "To Do" apps which might provide a louder signal.
And, of course, tell Apple that you want a louder alarm sound for your events: http://www.apple.com/feedback/iphone.html

SQL subquery returning too many rows with Max function

Hello, I hope someone can help me, I been working on this all day. I need to get max value, and the date and id where that max value is associated with between specific date ranges. Here is my code , and I have tried many different version but it still returning
more than one ID and date
Thanks in advance
SELECT
distinctbw_s.id,
avs.carProd,cd_s.RecordDate,
cd_s.milkProductionasMilkProd,
cd_s.WaterProductionasWaterProd
FROMtblTestbw_s
INNERJOINtblTestCpcd_sWITH(NOLOCK)
ONbw_s.id=cd_s.id
ANDcd_s.recorddateBETWEEN'08/06/2014'AND'10/05/2014'
InnerJoin
(selectid,max(CarVol)ascarProd
fromtblTestCp
whererecorddateBETWEEN'08/06/2014'AND'10/05/2014'
groupby
id)avs
onavs.id=bw_s.id
id RecordDate carProd       MilkProd WaterProd
47790 2014-10-05   132155   0 225
47790 2014-10-01   13444   0 0
47790 2014-08-06   132111   10 100
47790 2014-09-05   10000   500 145
47790 2014-09-20   10000   800 500
47791 2014-09-20   10000   300 500
47791 2014-09-21   10001   400 500
47791 2014-08-21   20001   600 500
And the result should be ( max carprod)
id RecordDate carProd       MilkProd WaterProd
47790 2014-10-05   132155  0 225
47791 2014-08-21   20001   600 500

Help your readers help you. Remember that we cannot see your screen, do not know your data, do not understand your schema, and cannot test a query without a complete script. So - remove the derived table (to which you gave the alias "avs")
and the associated columns from your query. Does that generate the correct results? I have my doubts since you say "too many" and the derived table will generate a single row per ID. That suggests that your join between the first
2 tables is the source of the problem. In addition, the use of DISTINCT is generally a sign that the query logic is incorrect, that there is a schema issue, or that there is a misunderstanding of the schema.

I have just upgraded my Mac to Firefox 9.0.1 and it has made my bookmark menus far too wide and renedered them almost unusable! What the?

User groups suggest I go through all my bookmarks shortening the URLs. I don't think so. I have way too many and should not have to do this. Why did version 9.0.1 of Firefox decide that my bookmarks menu needed to be wider when the previous version deemed it okay to have the short/ narrower style?

That can be caused by having some bookmarks with a long title in the main Bookmarks menu. 
The width of a column in the Bookmarks menu list is in current Firefox versions automatically adjusted to fit the bookmark with the longest name. 
You can check the names of the bookmarks and make the longer ones shorter.

29.0 is too slow and keeps coming back when using 28.0 Grrrrr!

29.0 was too jerky and too slow. I reinstated 28.0 and it was fine until 29 reinstalled on its own. I have checked about:config and everything everywhere was set to keep it from reverting back but it did anyway. Sorry to sound rude, but what gives? I've been dealing with this since it changed over. We should still be able to choose, right?

Hi Shirley,
If Firefox 29 is going slow, you can try to disable hardware acceleration in Firefox (you need to close and restart Firefox).
*Click the new 3 bar menu > Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
As for the updates, usually changing settings in about:config helps. Are you doing anything to make Firefox do an update such as going to Help > About Firefox? There was a previous way by going through the Options menu to disable updates but after disabling it through there, when you would go to Help > About Firefox, it would update regardless of that setting. There's a few ways to do this although I do all of them to prevent updates just in case one of the updates slip through.
You can set these prefs in <code>about:config</code> to disable automatic updating: 
app.update.auto - false 
app.update.enabled - false 
app.update.silent - false 
You can also follow our steps listed in our Knowledge Base
*https://support.mozilla.org/en-US/kb/how-stop-firefox-automatically-making-connections#w_auto-update-checking
You can set the app.update.url prefs to an empty string on the about:config page to prevent Firefox from checking for updates. (see screenshot below) Just erase everything from those prefs.

Ons.log getting too many and too large

Similar Messages

Maybe you are looking for