OnSearchComplete - Failed to end search job. Error = 0x8007000e.

Hello,
The below error received in WUhandler.log. Machine have space in C Drive.
OnSearchComplete - Failed to end search job. Error = 0x8007000e.
WUAHandler 8/29/2014 11:24:40 AM
20272 (0x4F30)
Scan failed with error = 0x8007000e. WUAHandler
8/29/2014 11:24:40 AM 20272 (0x4F30)
Please help to solve the issue.
Regards,
Boopathi s

Hello
The error code 0x8007000e generated due to two reason
1:- 1st Reason is low memory.means your system is going out of memory,
2:- The 2nd Reason is if your out of space,means the Drive where your updates were supposed to be placed is full,
so 1st check you Event Viewer if there is any Memory related logs.if there is then close all the unnecessary applications and run the cycles again
and in the second case free some space on the drive which is out of space.

Similar Messages

Function DB6_PLAN_STOP_BATCH_JOB failed with return code = Job error

Hi team,
I have issue with "SAP_COLLECTOR_FOR_PERFMONITOR" Job .it has been Finished but in Job Log I get error as below:
Job started
Step 001 started (program RSCOLL00, variant , user ID DDIC)
Clean_Plan:Cleanup of DB13 Plannings
Clean_Plan:started by RSDBPREV on server sapqas01
Clean_Plan:Cleaning up jobs of system QAS
Function DB6_PLAN_STOP_BATCH_JOB failed with return code = Job error
Clean_Plan:terminated with error
REASON=Job error
Database system not supported
Reorganization of the database started
Reorganization of the database ended
Job finished
I have alredy reschedule this Job in 000 with DDIC User.
Please help me ,
Thanks
Vijay

Hello Vijay,
The "Database system not supported" error you see, suggests that your TCOLL table is not setup correctly. You probably have a report scheduled in your TCOLL which is for a different DB then the one you run.
If the collector canels all the time, then this is probably a report which is scheduled to run every hour in your TCOLL. If it only cancels sometimes, then it should be easier to identify which report is causing it in your TCOLL.
The bottom line is to ensure your TCOLL is setup correctly and that you are not running DB reports there that are for a different DB than the one you use. The SAP note you follow to setup your TCOLL table depends on your SAP system version:
12103 - Contents of the TCOLL table
970449 - Contents of TCOLL table in SAP_BASIS 640
966309 - Contents of table TCOLL in SAP_BASIS 700
966631 - Contents of TCOLL table in SAP_BASIS 710
Regards,
Brendan

Software Update Deployment - Job error (0x80072f0c) received for assignment

I'm deploying a software update to my test clients but half of them failed with error below;
UpdateStore.log -
Failed to refresh sync message. Error = 0x87d00310.
WUAHandler.log
OnSearchComplete - Failed to end search job. Error = 0x80072f0c.
Scan failed with error = 0x80072f0c.
Updates Deployment
Job error (0x80072f0c) received for assignment ({0F2CA22F-BB7A-4ED8-9794-15AB24B83E09}) action
Do you have any recommendation ?

Since no one has replied to this post, I recommend that you contact Microsoft Support (CSS) directly, they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

DB13 error -- Function DB6_PLAN_DELETE_BATCH failed with return code = Job

hello All,
when I try to delete or edit any DBA Job in transaction DB13 the following error is displayed:
An error occurred when processing system
Function DB6_PLAN_DELETE_BATCH failed with return code = Job error
How can I fix this error and delete or change my DBA jobs?
My syste is SAP ECC 6.0 SR3 - Solaris 10 - Oracle 10.2.0.4.0
Thanks
Hernando

Hello Hernando,
Let's see what this SAP Note says,
Note 1093883 - ORACLE: Function module DB6_PLAN_ADD_BATCH fails
Edit: However, 'valid release' makes confusion
Regards
Subbarao
Edited by: subbarao chinta on Oct 8, 2009 9:00 PM

DBACOCKPIT job error when running backup job to LAN network folder

Hello all
I have set up a network location through MSSQL Server Management Studio from
Server Objects -> Backup devices
and using SQL Server Managemnt Studio i can backup Full or Log to that network locaion.
When in SAP using DBACOCKPIT i can see the backup device which i defined in the SQL but when i run a job to backup FULL or LOG then i get the following error :
SQL Job information ******************************
Jobname: SAP CCMS Full DB Backup of master,msdb,GDW [20110725095438-1-095438]
Type: TSQL
DB-Name: GDW
For Run: 20110725 09:54:38
Job history information *****************************
Stepname: CCMS-step 1
Command: declare @exeStmt nvarchar(2000) exec gdw.sap_backup_databases @dbList=
 "master,msdb,GDW",@r3Db="GDW",@bDev="@FisticFULL",@expDays= 27,@jobNam
 e= "SAP CCMS Full DB Backup of master,msdb,GDW [20110725095438-1-09543
 8]",@bkupChecksum="N",@bkupCompress="N",@bkupType="F",@nativeBkup="N",
 @exeDate = "20110725095438",@bkupSim = "N",@format = 0,@init = 0,@bkup
 Db = "master",@unload = 0,@exeStmt = @exeStmt OUTPUT
Status: (failure)
Message: 2528
Severity: 15
Duration: 0 hours(s) 0 min(s) 0 sec(s)
Last msg: Executed as user: NT AUTHORITY\SYSTEM. Must declare the scalar variabl
 e "@FisticFULL". [SQLSTATE 42000] (Error 137) Incorrect syntax near t
 he keyword 'with'. If this statement is a common table expression, an
 xmlnamespaces clause or a change tracking context clause, the previous
 statement must be terminated with a semicolon. [SQLSTATE 42000] (Erro
 r 319) DBCC execution completed. If DBCC printed error messages, cont
 act your system administrator. [SQLSTATE 01000] (Error 2528). The ste
 p failed.
 <----
End of Job Step History -
>
Job history information *****************************
any ideas?
thx in advance

Hello Marcus
I went to the link which you mentioned and there is nothing mentioned about hot to give rights to the user NTAUTHORITY\SYSTEM in order to do network backup.
I have done the following:
at server A which i my backup server i have a folder which i have it shared with full permissions for everyone.
At the SECURITY there is also full rights for everyone and for local admins.
From Server B i went to services and i stoped the SQL SERVER service and i set it up to log on with a user which has Administrator rights in the DOMAIN.
From server B i logged on with administrator and i defined at the SQL Server Management Studio at Server Objects -> Backup devices a new backup device with the network path.
The thing is that i have to go with windows explorer to the network location of where i want to do backup in order to put my domain username and password and after i can run the backup by the SQL Server Management Studio.
Do you know where do i need to give authority to NTAUTHORITY\SYSTEM in order for my backup to work from the SAP - DBACOCKPIT?
thx in advance.

DB13 return code = job error

Dear All,
WE are getting followin error while scheduling job in db13 tcode.
Function DB6_PLAN_ADD_BATCH failed with return code = Job error
ECC 6.0
Oracle 10g

You indicated that your database is Oracle 10G. This forum is for SAP on DB2 LUW as the database server. Please post your question on the appropriate forum.
Regards,
Adam Wilson
SAP Development Support
IBM Toronto Lab.

Code in before report getting executed but "Job error is: BIP job failed."

Customer is executing a BIP job that fires a pl/sql procedure via before report trigger. Procedure is completing successfully. But the BIP report is not getting generated. ESS process ends in error with the following error:
oracle.as.scheduler.ExecutionErrorException: ESS-07033 Job logic indicated a system error occurred while executing an asynchronous java job for request 604103. Job error is: BIP job failed.
     at oracle.as.scheduler.rp.AsyncFinalizeProcessor.processFinalizeRequest(AsyncFinalizeProcessor.java:131)
     at oracle.as.scheduler.rp.AsyncJavaSysExecWrapper.finalizeExecution(AsyncJavaSysExecWrapper.java:250)
     at oracle.as.scheduler.rp.EndpointProcessor.finalizeExecute(EndpointProcessor.java:1018)
     at oracle.as.scheduler.rp.EndpointProcessor.finalizeExecuteWrapper(EndpointProcessor.java:980)
     at oracle.as.scheduler.adapter.EndpointImpl.finalizeExecute(EndpointImpl.java:561)
     at oracle.as.scheduler.ejb.EssAppEndpointBean.finalizeExecute(EssAppEndpointBean.java:162)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy197.finalizeExecute(Unknown Source)
     at oracle.as.scheduler.ejb.ESSAppEndpoint_t596cy_MDOImpl.__WL_invoke(Unknown Source)
     at weblogic.ejb.container.internal.MDOMethodInvoker.invoke(MDOMethodInvoker.java:35)
     at oracle.as.scheduler.ejb.ESSAppEndpoint_t596cy_MDOImpl.finalizeExecute(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.as.scheduler.adapter.ra.rdp.RequestProcessor.invokeFinalizeExecute(RequestProcessor.java:8133)
     at oracle.as.scheduler.adapter.ra.rdp.RequestProcessor.execStage_Finalize(RequestProcessor.java:7331)
     at oracle.as.scheduler.adapter.ra.rdp.RequestProcessor.process_execute(RequestProcessor.java:4813)
     at oracle.as.scheduler.adapter.ra.rdp.RequestProcessor.dispatchHandler(RequestProcessor.java:2833)
     at oracle.as.scheduler.adapter.ra.rdp.RequestProcessor.processExecuteEvent(RequestProcessor.java:696)
     at oracle.as.scheduler.adapter.ra.rdp.RequestProcessor.processUpdateEvent(RequestProcessor.java:1345)
     at oracle.as.scheduler.adapter.ra.WorkUnitWorkerBase.processWork(WorkUnitWorkerBase.java:199)
     at oracle.as.scheduler.adapter.ra.WAWorker.run(WAWorke...
Any tips/pointers on possible issues? Could this be a template corruption?

Any reply for the above error please.I do have the same issue.
Please suggest.

ORA-27369: job of type EXECUTABLE failed with exit code: Unknown error

Hello DBAs,
I am trying to schedule a shell script through dbms_scheduler.CREATE_JOB
My database version is 10.2.0.3.0.
I can successfully schedule the job, but while running, it throwing ORA-27369 with out exit code.
Given below are the actions performed -
-- Created shel scripts-
$ cat shell01.sh
./test.sh >> test.log
$
$ cat test.sh
sqlplus -s "/ as sysdba" <<EOF
SELECT SUBSTR(host_name,0,10) host_name, instance_name, status,TO_CHAR(startup_time,'dd-mm-yy hh24:mi:ss') startup_time
FROM v\$instance;
disconnect;
exit;
EOF
-- Granting privileges - (eventhough I have tried from 'SYS' schema)
GRANT create Job, create external job, execute any class, execute any program , manage scheduler to sys;
-- Drop job with name RUN_SHELL01
BEGIN
dbms_scheduler.drop_job('RUN_SHELL01');
END;
-- Schedule job with name RUN_SHELL01
BEGIN
dbms_scheduler.CREATE_JOB
 (job_name => 'RUN_SHELL01',
 job_type => 'EXECUTABLE',
 job_action => '/home/ora1023/shell01.sh',
start_date => '18-AUG-09 05:37:00 AM',
 end_date => NULL,
 repeat_interval => 'FREQ=MINUTELY',
 enabled => false,
 comments => 'Run shell-script');
END;
--Enable job
BEGIN
dbms_scheduler.enable('RUN_SHELL01');
END;
-- Checking status
SELECT owner, job_name, enabled FROM dba_scheduler_jobs;
select JOB_NAME,STATUS,ERROR# from dba_scheduler_job_run_details where job_name='RUN_SHELL01';
-- Executing the job
SQL> exec dbms_scheduler.run_job('RUN_SHELL01');
BEGIN dbms_scheduler.run_job('RUN_SHELL01'); END;
ERROR at line 1:
ORA-27369: job of type EXECUTABLE failed with exit code: Unknown error
ORA-06512: at "SYS.DBMS_ISCHED", line 150
ORA-06512: at "SYS.DBMS_SCHEDULER", line 441
ORA-06512: at line 1
Anybody please suggest a solutions for this -

My shell script will work as below -
user01@test01:/home/user01 : cat shell01.sh
./test.sh >> test.log
user01@test01:/home/user01 :
user01@test01:/home/user01 :
user01@test01:/home/user01 : cat test.sh
sqlplus -s "/ as sysdba" <<EOF
SELECT SUBSTR(host_name,0,10) host_name, instance_name, status,TO_CHAR(startup_time,'dd-mm-yy hh24:mi:ss') startup_time
FROM v\$instance;
disconnect;
exit;
EOF
user01@test01:/home/user01 : ./shell01.sh
user01@test01:/home/user01 : ls -ltr
-rw-r--r-- 1 ora1023 dba 155 Aug 26 05:28 test.log
user01@test01:/home/user01 : cat test.log
HOST_NAME INSTANCE_NAME STATUS STARTUP_TIME
test01 oft1 OPEN 18-08-09 08:22:45
user01@test01:/home/user01 :
** I think this shell script is working fine! ..its only for testing..
and while we are querying dba_scheduler_job_run_details for additional info-
SQL> select s.STATUS ,s.ADDITIONAL_INFO from dba_scheduler_job_run_details s where s.job_name='RUN_SHELL01';
STATUS
ADDITIONAL_INFO
STANDARD_ERROR="execve: Exec format error"
FAILED
ORA-27369: job of type EXECUTABLE failed with exit code: Unknown error
STANDARD_ERROR="execve: Exec format error"
I think Metalink Doc ID: 555160.1 (Schedular Job of Type 'EXECUTABLE' Fails with ORA-27369 "exit code: 255" STANDARD_ERROR="execve: Exec format error"). Will help me to solve this issue Since i am using ksh -
# echo $SHELL
/bin/ksh
Edited by: Rajesh Menon on Aug 25, 2009 9:21 PM

ORA-27369: job of type EXECUTABLE failed with exit code: Unknown error STAN

ORA-27369: job of type EXECUTABLE failed with exit code: Unknown error STANDARD_ERROR="execve: Exec format error"
#!/usr/bin/ksh
/bin/find /u08/oradba/S036/archlog -name "*.arc" -exec rm -f {} \;
Simple shell script gives above error when scheduled through dbms_scheduler. I did check metalink notes everything seems to be in order.
Thanks,
Siva

Hi,
Make sure the script is set to be executable (chmod a+rx script.sh) and that /usr/bin/ksh exists and is executable.
If it still doesn't work post the new error message and the output of "ls -l script.sh" and also your exact Oracle version. Also try running the shell script directly at the command line (e.g. ./script.sh).
Hope this helps,
Ravi.

DAC fails to complete his job..

Hello all,
I hope someone can help me on this.
I have installed eBS 11.5.10.2 (including the vision database) & BIA 7.9.3 & OIEE10.1.3.3.1.
Now I started the dac client and started the complete oracle 11.5.10.
Now it fails at the 177th job.
I think it has something to do with the tablespace or something, but don't know what (it is big enough)
It fails on: SDE_ORA_GLJournals and on TASK_GROUP_Extract_EmployeeEventFact and on SDA_ORA_Per_Assg_For_PayrollFact
When I look in the log file of the GLJournals I see the following:
WRITER_1_*_1> WRT_8161
TARGET BASED COMMIT POINT Tue Apr 08 20:19:24 2008
===================================================
WRT_8036 Target: W_ORA_GL_JOURNALS_F_TMP (Instance Name: [W_ORA_GL_JOURNALS_F_TMP])
WRT_8038 Inserted rows - Requested: 560560 Applied: 560560 Rejected: 0 Affected: 560560
WRT_8036 Target: W_ORA_GLRF_DERV_F_TMP (Instance Name: [W_ORA_GLRF_DERV_F_TMP])
WRT_8044 No data loaded for this target
WRITER_1_*_1> WRT_8161
TARGET BASED COMMIT POINT Tue Apr 08 20:19:29 2008
===================================================
WRT_8036 Target: W_ORA_GL_JOURNALS_F_TMP (Instance Name: [W_ORA_GL_JOURNALS_F_TMP])
WRT_8038 Inserted rows - Requested: 570752 Applied: 570752 Rejected: 0 Affected: 570752
WRT_8036 Target: W_ORA_GLRF_DERV_F_TMP (Instance Name: [W_ORA_GLRF_DERV_F_TMP])
WRT_8044 No data loaded for this target
WRITER_1_*_1> Tue Apr 08 20:19:30 2008
WRITER_1_*_1> CMN_1022 Database driver error...
CMN_1022 [ ORA-02478: merge into base segment would overflow MAXEXTENTS limit
Database driver error... Function Name : Commit]
WRITER_1_*_1> Tue Apr 08 20:19:30 2008
WRITER_1_*_1> WRT_8024 ERROR doing COMMIT in Writer [
TARGET BASED COMMIT POINT Tue Apr 08 20:19:30 2008
===================================================
]. Writer terminating.
WRITER_1_*_1> WRT_8328 The rollback is issued due to failed commit
WRITER_1_*_1> WRT_8331 Rollback statistics:
WRT_8162 ===================================================
WRT_8330 Rolled back [0] inserted, [0] deleted, [0] updated rows for the target [W_ORA_GL_JOURNALS_F_TMP]
WRT_8330 Rolled back [0] inserted, [0] deleted, [0] updated rows for the target [W_ORA_GLRF_DERV_F_TMP]
WRITER_1_*_1> WRT_8333 Rolling back all the targets due to fatal session error.
WRITER_1_*_1> WRT_8325 Final rollback executed for the target [W_ORA_GL_JOURNALS_F_TMP, W_ORA_GLRF_DERV_F_TMP] at end of load
WRITER_1_*_1> WRT_8035 Load complete time: Tue Apr 08 20:19:30 2008
LOAD SUMMARY
============
WRT_8036 Target: W_ORA_GL_JOURNALS_F_TMP (Instance Name: [W_ORA_GL_JOURNALS_F_TMP])
WRT_8038 Inserted rows - Requested: 570752 Applied: 570752 Rejected: 0 Affected: 570752
WRT_8036 Target: W_ORA_GLRF_DERV_F_TMP (Instance Name: [W_ORA_GLRF_DERV_F_TMP])
WRT_8044 No data loaded for this target
WRITER_1__1> WRT_8043 ****END LOAD SESSION*****
WRITER_1_*_1> Tue Apr 08 20:19:30 2008
WRITER_1_*_1> WRT_8076 Writer run terminated. [Commit Error]
TRANSF_1_1_1> Tue Apr 08 20:19:30 2008
TRANSF_1_1_1> TM_6085 The transformation [W_ORA_GL_JOURNALS_F_TMP] encountered fatal error. Terminating session.
TRANSF_1_1_1> Tue Apr 08 20:19:30 2008
TRANSF_1_1_1> TM_6085 The transformation [EXP_GL_JOURNALS_KEY_ID] encountered fatal error. Terminating session.
TRANSF_1_1_1> Tue Apr 08 20:19:30 2008
TRANSF_1_1_1> TM_6085 The transformation [EXP_GL_JOURNALS_KEY_ID] encountered fatal error. Terminating session.
TRANSF_1_1_1> Tue Apr 08 20:19:30 2008
TRANSF_1_1_1> TM_6085 The transformation [mplt_BC_ORA_GLXactsJournalsExtract.SQ_GL_JE_LINES] encountered fatal error. Terminating session.
TRANSF_1_1_1> Tue Apr 08 20:19:30 2008
TRANSF_1_1_1> TM_6085 The transformation [mplt_BC_ORA_GLXactsJournalsExtract.SQ_GL_JE_LINES] encountered fatal error. Terminating session.
TRANSF_1_1_1> Tue Apr 08 20:19:30 2008
TRANSF_1_1_1> TM_6085 The transformation [mplt_BC_ORA_GLXactsJournalsExtract.SQ_GL_JE_LINES] encountered fatal error. Terminating session.
TRANSF_1_1_1> DBG_21511 TE: Fatal Transformation Error.
MASTER> PETL_24020
***** RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
MASTER> PETL_24018 Thread [READER_1_1_1] created for the read stage of partition point [mplt_BC_ORA_GLXactsJournalsExtract.SQ_GL_JE_LINES] has completed: Total Run Time = [233.734375] secs, Total Idle Time = [58.968750] secs, Busy Percentage = [74.771041].
MASTER> PETL_24019 Thread [TRANSF_1_1_1] created for the transformation stage of partition point [mplt_BC_ORA_GLXactsJournalsExtract.SQ_GL_JE_LINES] has completed: Total Run Time = [91.875000] secs, Total Idle Time = [27.062500] secs, Busy Percentage = [70.544218].
MASTER> PETL_24022 Thread [WRITER_1_*_1] created for the write stage of partition point(s) [W_ORA_GL_JOURNALS_F_TMP, W_ORA_GLRF_DERV_F_TMP] has completed: Total Run Time = [173.703125] secs, Total Idle Time = [129.343750] secs, Busy Percentage = [25.537465].
MASTER> PETL_24021 ***** END RUN INFO *****
MASTER> PETL_24005 Starting post-session tasks.
MASTER> PETL_24029 Post-session task completed successfully.
MAPPING> TM_6020 Session [SDE_ORA_GLJournals_Full] completed at [Tue Apr 08 20:19:31 2008]
MAPPING> TM_6018 Session [SDE_ORA_GLJournals_Full] run completed with [0] row transformation errors.
MAPPING> TM_6022
SESSION LOAD SUMMARY
================================================
MAPPING> TM_6252 Source Load Summary.
MAPPING> CMN_1740 Table: [SQ_GL_JE_LINES] (Instance Name: [mplt_BC_ORA_GLXactsJournalsExtract.SQ_GL_JE_LINES])
     Output Rows [584928], Affected Rows [584928], Applied Rows [584928], Rejected Rows [0]
MAPPING> TM_6253 Target Load Summary.
MAPPING> CMN_1740 Table: [W_ORA_GL_JOURNALS_F_TMP] (Instance Name: [W_ORA_GL_JOURNALS_F_TMP])
     Output Rows [570752], Affected Rows [570752], Applied Rows [570752], Rejected Rows [0]
MAPPING> CMN_1740 Table: [W_ORA_GLRF_DERV_F_TMP] (Instance Name: [W_ORA_GLRF_DERV_F_TMP])
     Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [0]
MAPPING> TM_6023
===================================================
MASTER> PETL_24002 Parallel Pipeline Engine finished.
MASTER> PETL_24013 Session run completed with failure.
Hope anyone can help me on this!

I do not think it is the size of the TEMP tablespace but rather the settings of the Extents, or your default extent in this case.
I searched your error message and the remedy is to use a larger value for MAXEXTENTS on the base segment or make the extents in the temporary segments larger.
For example: set the initial extent to at least 1 mb, next extent also 1 mb, and maxextents to unlimited.
Maxextents should be unlimited always, as there is no longer a technical reason the limit the number of extents.
You may also want to try to run a subset of 11.5.10 just to get a successful run. Consider OM (Enterprise Sales) or HR.
But watch out there is a potential duplicate record in the PER_ALL_PEOPLE_F table. I posted about it on another thread.

Failed to open service OracleDEV102TNSListener , error 1060

Dear Consultants,
I have been trying to install ECC6 , Oracle on Windows 2003, and my Hardware is RAM --2 GB
HDD -- 300GB
I am having intel duo core processor and iam using Gigabyte motherboard,Intel chipset.
My Installations stops at Import_Abap phase, following are the logs ,
ERROR 2007-03-10 04:47:46
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2007-03-10 04:47:47
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
INFO 2007-03-10 05:03:18
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
I have set the all the Environment variables , i run r3trans -d and the result is
C:\Documents and Settings\devadm>r3trans -d
This is r3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
unicode enabled version
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
r3trans finished (0012).
I also run r3trans -x and the result is.
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541'
4 ETW000 21 1.098448
4 ETW000 [dev trc ,00000] Try to connect with default password 142 1.098590
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000 22 1.098612
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 23 1.098635
4 ETW000 [dev trc ,00000] 0 UTF8 1 0244CF08 0245243C 02451CC4
4 ETW000 24 1.098659
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=02463484) 14 1.098673
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=02451C10,srvhp=02463484)
4 ETW000 19 1.098692
4 ETW000 [dev trc ,00000] Deallocating server context handle 02463484 16 1.098708
4 ETW000 [dev trc ,00000] Allocating server context handle 15 1.098723
4 ETW000 [dev trc ,00000] Attaching to DB Server DEV (con_hdl=0,svchp=02451C10,svrhp=02463484)
4 ETW000 29 1.098752
4 ETW000 [dev trc ,00000] Tue Mar 13 04:38:09 2007 1093335 2.192087
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 19 2.192106
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541'
4 ETW000 19 2.192125
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 12541 performing CON [dblink#3 @ 431]
4 ETW000 176 2.192301
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#3 @ 431]
4 ETW000 19 2.192320
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'DEV'"
Event Viewer result is
----
Faulting application isqlplussvc.exe, version 1.0.7.0, faulting module msvcrt.dll, version 7.0.3790.0, fault address 0x0003113b.
finally in SAPINST logs i could see

Starting tnslsnr: please wait...
Failed to open service <OracleDEV102TNSListener>, error 1060.
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is C:\oracle\DEV\102\network\admin\listener.ora
Log messages written to C:\oracle\DEV\102\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DEV)(PORT=1527)))
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV.WORLD))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date 10-MAR-2007 01:29:29
Uptime 0 days 0 hr. 0 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\DEV\102\network\admin\listener.ora
Listener Log File C:\oracle\DEV\102\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DEV)(PORT=1527)))
Services Summary...
Service "DEV" has 1 instance(s).
Instance "DEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Please suggest for the possible workaround, as you can see i have tried everything.
Regards,

Dear Umesh,
I have triggered the Installation again, still the problem remains unresolved,
PLEASE CONFIRM THAT I AM USING INTEL CORE DUO PROCESSOR , does it have any dependcies or prerequisites.
pasting the last few lines of logs of SAPAPPL1_15, where i got the error in ABAP IMPORT.
DbSl Trace: ORA-4031 occurred when executing SQL statement (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "VDBEPI_EU~0" ON "VDBEPI_EU" ( "MANDT", "BUKRS", "RBELKPFD", "RPOSNR" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 16384 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 4031)
error message returned by DbSl:
ORA-04031: unable to allocate 40 bytes of shared memory ("shared pool","CREATE UNIQUE INDEX "VDBEPI_...","Typecheck","qcsqlpath: qcsAddSqlPath")
(DB) INFO: disconnected from DB
E:\usr\sap\NAJ\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
E:\usr\sap\NAJ\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20070517090126
===================================================
IMPORT_MONITOR.JAVA logs.
Import Monitor jobs: running 2, waiting 35, completed 34, failed 1, total 72.
Loading of 'SAPAPPL1_15' import package: ERROR
Import Monitor jobs: running 1, waiting 35, completed 34, failed 2, total 72.
Loading of 'SAPAPPL2_5' import package: ERROR
Import Monitor jobs: running 0, waiting 35, completed 34, failed 3, total 72.
Import Monitor jobs: running 1, waiting 34, completed 34, failed 3, total 72.
Import Monitor jobs: running 2, waiting 33, completed 34, failed 3, total 72.
Import Monitor jobs: running 3, waiting 32, completed 34, failed 3, total 72.
Loading of 'D021T' import package: OK
Import Monitor jobs: running 2, waiting 32, completed 35, failed 3, total 72.
Import Monitor jobs: running 3, waiting 31, completed 35, failed 3, total 72.
Loading of 'SAPAPPL1_12' import package: OK
Import Monitor jobs: running 2, waiting 31, completed 36, failed 3, total 72.
Import Monitor jobs: running 3, waiting 30, completed 36, failed 3, total 72.
Loading of 'SAPSSEXC_4' import package: OK
Import Monitor jobs: running 2, waiting 30, completed 37, failed 3, total 72.
Import Monitor jobs: running 3, waiting 29, completed 37, failed 3, total 72.
Loading of 'SAPSSEXC_6' import package: OK
Import Monitor jobs: running 2, waiting 29, completed 38, failed 3, total 72.
Regards,

HELP! 'unexpected end of file' error-Is there a fix?! OS 10.4.11

Getting 'Unexpected end of file' error when trying to open a file (that's a rush job) in QuarkXpress 6.5. I attributed it to lack of memory, so I immediately backed up all files and HD to an external drive to free up space. Restarted and prayed... Quark launched, but file won't open. Same error.
Have: 2.1 GHz PPC G5, 1.5 GB DDR2 SDRAM OS 10.4.11 (pre Intel)
Capacity: 232.8GB, Available: 163GB, Used 69.6GB
Have been searching help site for 5 hours looking for answer and am DESPERATE! I saved changes regularly, but can't access this file at all... I've lost 2 full days & nights working on this project that has to be done in 2 days.
Ran Disk Utility, but no success opening this specific Quark file (Quark will launch- it's just this file that's affected). Have tried to down load Applejack, etc. but keep finding out they only support OS 10.5 or higher. (Haven't been able to afford upgraded system since Intel requires purchase of full verions of graphics software instead of upgrades to the tune of $6k).
PLEASE, I only know enough to be dangerous, so ANY help is GREATLY APPRECIATED!
Savvy folks- if I'm in the wrong place, please send me a link where I can solve this personal catastrophy.
Many thanks-in-advance

I think you best do over your work from scratch. You need to make backup copies of the files regularly. You need to have copies on multiple disks or flash drives.
I saved changes regularly
You should know that this isn't sufficient. You need to have multiplte copies of the file. Backup anyone? Could be the file structure got messed up. Could be Quark messed up the file.
You need to get a newer machine. G5's are not reliable any more. Need to see if Quark will run in compatiblity mode on an intel machine. You should at least get an external firewire drive from owc. Old hd's are not reliable.
Boot in safe mode. Hold down the shift key when powering on the machine. This will run a disk repair program. Boot up will take longer as the harddrive is scanned and repaired.
See this article:
http://docs.info.apple.com/article.html?artnum=107393
Or from:
    mrtotes article :
    Boot from the OS X Install disk and from the Menu Bar choose Disk Utility. Then run "Repair Disk" and "Repair Disk Permissions" on your hard disk.
    a brody:
    https://discussions.apple.com/docs/DOC-1689
Here the apple article on booting single user mode and using fsck. See the section on Use fsck:
http://docs.info.apple.com/article.html?artnum=106214
I suspect not but Perhaps Disk Warrior will be of some help:
http://www.alsoft.com/DiskWarrior/
Robert

Database Services Engine Failed, SQL Server Replication Failed, Full Text Search Failed, Reporting Services Failed

Hello,
I am trying to install Microsoft SQL Server 2008 R2. I get the error bellow (Database Services Engine Failed, SQL Server Replication Failed, Full Text Search Failed, Reporting Services Failed). I already have a copy of SQL Server 2008 R2 on the machine.
I want to create a new named instance of SQL Server for some software I'm installing.
The error is below.
Any help would be much appreciated, thanks!
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -595541211
Exit facility code: 1152
Exit error code: 49957
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-02-06 09:14:09
End time: 2014-02-06 11:18:16
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.2500.0%26EvtType%3d0x44D4F75E%400xDC80C325
Machine Properties:
Machine name: BAHPBZ52TY
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 R2 SQLEXPRESS MSSQL10_50.SQLEXPRESS Database Engine Services
1033 Express Edition 10.50.1600.1 No
Sql Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.50.1600.1 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: c:\c7ced2c86d6b9813b28186cc831c2054\x64\setup\
Installation edition: EXPRESS_ADVANCED
Slipstream: True
SP Level 1
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE:
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,RS,SSMS,SNAC_SDK,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: c:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: aedt2bSQL
INSTANCENAME: AEDT2BSQL
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: c:\c7ced2c86d6b9813b28186cc831c2054\PCUSOURCE
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: BAH\568385
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\SystemConfigurationCheck_Report.htm

Hello,
If you see error descriptioon it gives access denied so basically it is because of some access issue.I guess You must be using some domin account for installation make sure it is added as local administrator also instead of using NT Authority network
service as SQL server service account use local system account .
Below link would help
http://serverfault.com/questions/212135/access-is-denied-error-installing-sql-server-2008-on-windows-7
You can also browse to setup.exe file and RK on it and select run as administrator
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Sending job error message to admin by email

Hi everyone...
Anyone knows how to send job error message to admin by email? For example, if crawler failed, an email is sent to admin with the error message. I'm thinking of building windows service which run at the background and knows when a job fail and send the error message through email to admin.
Is there a better way?
Cheers,
Jefi Santoso

hi,
>>>Can this be achieved through BPM?
yes you can put your transformation step
and send step in a block and specify an exception
branch and catch all exceptions that will
occur during transformations and the send step
then you can send info from the exception branch to
any other system
you won't be able to catch the error's name
but you will be able to notify any thinrd party
about the error
more on error catching:
http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm
Regards,
michal

The package failed to load due to error 0xC0011008

I am trying to run a SSIS Package from SQL Server BI Studio. I receive the error "The package failed to load due to error 0xC0011008". SQL Server 2008 R2 installed (32bit Win 7), along with Integration Services. The Package connects
to a SQL Server DB.
Here is the full error taken from consol in BI Studio:
SSIS package "CreateDynSSIS_DB_RunDynSSiSDB.dtsx" starting.
Error: 0x1 at ST_Gen_Pkg_Src_SqlServ: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008
"Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
---> System.Runtime.InteropServices.COMException (0xC0011008): The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was
passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
   at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.LoadPackage(String FileName, Boolean loadNeutral, IDTSEvents100 pEvents)
   at Microsoft.SqlServer.Dts.Runtime.Application.LoadPackage(String fileName, IDTSEvents events, Boolean loadNeutral)
   --- End of inner exception stack trace ---
   at ST_0f39f89613ca43e9a6660953aa72fa2c.csproj.ScriptMain.Main()
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig,       MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
   at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
   at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
Task failed: ST_Gen_Pkg_Src_SqlServ
Warning: 0x80019002 at CreateDynSSIS_DB_RunDynSSiSDB: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "CreateDynSSIS_DB_RunDynSSiSDB.dtsx" finished: Failure.
The error is thrown at this line:
DynamicPackage = app.LoadPackage(DynamicPackagePath, null);
Any help would be great! I've done a bit of Googling on the topic already.. and nothing has worked so far.

Hi,
Reason for the error: Old
version of the DTEXEC is picked up by SQL Server instead of the new one.
Refer this link for more info
THE PACKAGE FAILED TO LOAD DUE TO ERROR 0XC0011008
Hope this info Helps

OnSearchComplete - Failed to end search job. Error = 0x8007000e.

Similar Messages

Maybe you are looking for