OnSubmit and Multi-Select

Hi all -
I am going a little nuts here. I am trying to get the page to submit when a user click on an entry in the multi-select list. I was able to do so with onclick="javascript:doSubmit('LIST1')" in the element properties.
I have an on-submit procedure which updates a collection when the request = LIST1. This works perfectly. I also have a Before Header procedure which creates/truncates the collection. Its supposed to just empty the collection on the first page view - I have the condition set to fire every time except when the request is LIST1.
So after debugging, I found the request variable is not being carried through after submitting, and the before header process is truncating the collection. So I guess my curiosity got the better of me, and I'm wondering how the buttons work b/c when I mouse over them they say javascript:doSubmit('SOMETHING'). Any ideas on what I need to do different to get the request in the URL like the buttons?

When your page is submitted with a certain value for REQUEST (either when you click a button or explicitly call doSubmit(<request> as you did), the value of REQUEST is available only for the duration of "accept processing" i.e. all the processing in the Page Processing column of your Page Definition.
As the last step in accept processing, branches are evaluated and the first branch whose condition evaluates to true is taken and the flow engine redirects to the page specified by the branch. The value of REQUEST will be blank for this (new) show request.
If you would like your REQUEST value to carry through to the subsequent page show, you can define a branch to conditionally fire when REQUEST=LIST1 and in that branch's definition, again pass in REQUEST=LIST1. Now this value of REQUEST will be visible to your Before Header process on the subsequent show request.
Hope this helps.

Similar Messages

Make Record for folder and multi-selected files

Hi,
'Make Record' item disappeared in MENU for folders not for files.
And it can't make record for multi-selected files.
I can only make Record by one and one.
How to make Records for folder and multi-selected files?
Regards
Kitae

Programatically, only a single document at a time can be made a record :-
makeRecord
public Item makeRecord(long parentId,
long docId,
NamedValue[] attrs,
AttributeRequest[] attributes)
throws FdkException
You could potentially through a custom workflow triggered on UserRequest allow multiple submitted documents to be made records through a custom BPEL process calling Content DB Web Services.
Matt.

Assessment Scripts and Multi Select Picklists

Hi
Is it possible for a question within an assessment script to have more than one answer and therefore update a Multi-Select picklist?
We have a script that would be ideal for an assessment script but there are a number of questions within the script that would require multiple answers - any help or suggestions appreciated
Cheers

The assessment functionality only allows one answer per question to be stored in the Lead, Contact, Opportunity or Service Request object.

Combo Prompt Design (with Drop down and Multi-select prompts)

Hi folks,
I have the following prompt design requirement in OBIEE dashboard:
PromptA: should be a drop-down prompt
PromptB: should be a multi-select prompt
PromptB should list the values contained in either of two dimensions (lets say: Product Names and Product Group Names ). Lets define Product Names to be the names of individual products, while the Product Group Names is the names of a predefined collection of certain products.
The string values that should appear in the PromptA then are: Product Names and Product Group Names. Consequent to the selection made in PromptA, values from one of these two dimensions should be dynamically displayed in PromptB. That is, if Product Names is selected from PromptA, then all product names from the Product Names dimension should be listed in PromptB. And if Product Group Names is selected from PromptA, then all product group names from the Product Group Names dimension should be listed in PromptB.
Can anyone tell me how do I relate the above two prompts and have my reports to work accordingly?
regards,
Mahendra
Edited by: Mahendra Varman on Jan 7, 2009 12:11 PM
Edited by: Mahendra Varman on Jan 7, 2009 12:21 PM

Hi
For this you have to do two dashboard prompt
In promptA:
select one dummy column,
In control dropdown list select dropdown
In show dropdown list select SQL Results
In sql results write the following query
Select case when 1=0 then tabelname.column else 'Tablename.ProductNames' end from subjectarea name
Union all
Select case when 1=0 then tablename.column else 'Tablename.ProductGroupName' end from subject are name
In set variable ->set presentation variable called var1
Saved it as PromptA
In PromptB:
Select one dummy column in that column forumla write @{var1}
but problem with this approach it shows two Go buttons for two prompts to avoide this create custom Go button
for creating custom Go button see this link
http://obiee101.blogspot.com/2008/11/obiee-how-to-replace-multiple-go-button.html
Try this its not work let me know
i tried for another solution
Regards
Naresh

Prompts and Multi-Select Picklists

Hi all,
I'm trying to find a neat way of prompting and doing a "contains any" filter a report i have on a multi select picklist within accounts.
e.g. Field can have values A, B, C
Account 1: A
Account 2: A, B
Account 3: B, C
Account 4: A, C
Account 5: A, B
I wanted a report to give me anything with A or C in it... should bring back 1,3,4,5
I used a dashboard prompt as i like the look of the Multi-Select box used. The problem used was that when i first ran it the options I was given were:
A
A,B
B,C
A,C
Basically listing the different combinations possible... but i just want the list to say A, B,C. So i tried to put this SQL query on the values:
+'SELECT "- Custom MSP_1 (Account)".MSPICK_01 FROM "Account Analysis" WHERE "- Custom MSP_1 (Account)".MSPICK_01 NOT LIKE '%,%' '+
The problem is that it (correctly) only bring back the values that occur on their own... so only "A"!
Any way for me have it pull back just the values defined in the picklist under app customisation?
Feel like i rambled on but hopefully it makes sense!
Thanks,
Alex

I can see what you are trying to get at, but I wonder if it will work.
Even if you somehow get A,B,C as individual values in the prompt then how is it going to filter the report.
Lets say on the dashboard prompt you select B then as per your example your report should show Account 2,3,5.
But it wont because the field that you have used in your report doesn't contain B as a standalone. The values that it contain say A,B or B,C is one string or one entity.
So the multi-select prompt based on that field is going to show the values contained in that field which is what you are initially getting.
You will have to do something in the report itself to break it down so that you get A,B,C as single entity.
I have a vague idea but I wonder if it works. You can still try though :)
Assuming your report is a single criteria report, pull any field and edit its Fx as follows:
CASE WHEN - Custom MSP_1 (Account)".MSPICK_01 LIKE '%A%' THEN 'A' WHEN - Custom MSP_1 (Account)".MSPICK_01 LIKE '%B%' THEN 'B' WHEN ... ELSE NULL END
Assuming here that you only have values like A,B,C.
So what I am hoping is that the custom field that we created will have values like A,B,C as separate entities and in the table view for your example we will have 9 rows.
Account MSPICK Custom Field
Acc 1 A A
Acc 2 A,B A
Acc 2 A,B B
Acc 3 B,C B
Acc 3 B,C C
and so on
Finally in your prompt design, take any field and modify its Fx like the CASE WHEN condition described above and that should give you A,B,C as you want it.
Also you may hide the custom field in your final report.

Power Query and multi-selection columns

I have a power query pulling data from a sharepoint list some of the list columns allow multiple selections.
The power query seems to only be pulling in one value instead of all the selected ones in the columns.
Thanks,
Eric

Hi Eric,
Just to add a bit more detail to what is going.
In Power Query, SharePoint List columns with multiple selection choices are represented as nested tables with a single column called "Value". Each row of these nested tables will represent a selected choice for the list item. You can examine this by clicking
on "Table" under the "Options" column on one of the rows.
By clicking on the "Expand" icon of a column, you are making use of the Table.ExpandTableColumn function. That function will take each row in the table and do a cross product with the rows of the nested tables of the selected column. This means that each
row will be duplicated as many times as there rows in the nested columns.
In this specific case, each item in the SharePoint list will become duplicated as many times as there are selected choices for the item. This can be very useful in some cases, but I think that in your case this is not the operation that you're looking for.
If you want to simply create a column that combines all the selected choices as a single text value, there's a simpler alternative to Alejandro's solution:
= Table.AddColumn(RemovedColumns, "Options 2", each Text.Combine([Options][Value], ", "))
You can simply paste the above as a blank step by clicking on the "Fx" icon next to the formula bar. Here we're creating a new column called "Options 2" that combines the text values in the "Value" column of the nested table of the Options column and separate
each entry by ", ".
-Tristan

Pagination using table growing property and multi-select table issues

Hi,
We're using the growing property on a table, thus the pagination is handled by the control it self.
However, if we want to update some item in the table, in order to get those details reflected, we're refreshing the model, which is performance intensive.
Is there any way we can update the UI only without creating any UI inconsistencies?
Another question is that, is there any way to disbale the checkbox on the table items, based on some property from the backend. we tried to use editable property, but it hides the entire row.
We need to disable the checkbox on the rows for particular items?
Also, I need to know any resources on the mobile library where I can find the CSS related documentaion.
Like we need to create a icon + text structure, which controls should be ideal to use? I have used
<HBox><Icon src="abc"/><Text text="abc"/></Hbox>, but it creates alignment issues. Any ideas here?
Thanks!
Aamir

855354 wrote:
We are implementing pagination in our application and comparing the scrollable result set approach with using ROWNUM provided by oracle.The rownum approach scales better.
Does this literrally mean that Oracle stores all the records in client-side memory cache? Well if it is scrollable it has to store all the rows somewhere, that is the disadvantage.
Can we use fetchSize attribute or any other work around to limit the number of records in client-side memory?No. If you want that behavior that is how the rownum approach works.
In the above case, when MAX_ROW_TO_FETCH is a large number (say 50000), then oracle will have to create a temporary table in memory with all the 50000 records and then will fetch from that table required records as per MIN_ROW_TO_FETCH.No, that is not how it works, where did you read that?
In this case, reading rest of the records and storing in temporary in memory table will impact performance. Is my understanding correct or i am missing something here?Your understanding is not correct. The rownum approach does not work the way you think and behaves more like the way you want the scrollable result set to work.

Prompt value based on another prompt(Multi Select prompt)

Hi Expert,
I have two multiselect prompt Continent and conutry
my req is when I select continent in the first prompt then second prompt sholud show the country based on first prompt value.
Ex : If I select Asia in continet then country prompt sholud show only Asia's country.
any sugeestion pls.
i know constraint but only possible in drop down prompt..

Hi,
Constrain is not applicable for edit box only.We can use it for drop down list and multi select also.Other wise go for the presentation variable.
mark if helpful/correct...
thanks,
prassu

APEX - passing values from LOV's or multi-select LOV's to another APEX form

I am new APEX development and I need to take the values from LOV's and multi-select LOV's and pass them to another APEX form. I want to take those passed values and use them in the where clause of the base-table in the called form. Any assistance would be greately appreciated.

Hi,
Refer this example
http://www.talkapex.com/2009/07/apex-how-to-pass-multiselect-list.html
Example: http://apex.oracle.com/pls/otn/f?p=20195:2100
Regards,
Kartik Patel
http://patelkartik.blogspot.com/
http://apex.oracle.com/pls/apex/f?p=9904351712:1

PJC Multi Select tlist manipulation

I have a multi-select tlist item and using oracle.forms.demos.enhancedItems.MultiSelectTList as the implementation class just like the demo. This tlist is on a stacked canvas that pops up when the user attempts to edit a field in a multi-record content canvas. The items that appear in the tlist are multi-select so the user can associate (select) multiple items for each record in the multi-record content canvas. The tlist items are stored in a separate table from the records in the multi-record content canvas. I am able to select multiple items in the tlist and grab all the selected items to insert into the database but what I need to do is when the itlist stacked canvas opens/pops-up when a user is editting that one field associated with the tlist I need to display all the items in the tlist and multi-select the items previously associated with the record in the content canvas. I know how to make the list display a particular item as "selected" in the tlist but not multiple items. Is this possible?

I got my question answered - I used the following:
set_custom_property('BLOCK.ITEM', to_number(:SYSTEM.CURSOR_RECORD), 'LIST_SELECTION', '1,3');
where the '1,3' string are the record indexes in the multi-record tlist.

PLAYBOOK BRIDGE - EMAIL ACCESS - MULTI SELECT DELETE FREEZE UP PROBLEM

I just purchased my BlackBerry Playbook Yesterday 04-30-2011, I updated to the latest OS Version: 1.0.1.1710
My playbook has been working awesome, with the exception of only having a few apps out so far... I love it. (I know the apps will come soon)
I have a Blackberry Curve 8530 on Sprint with OS Version:5.0.0.1030
When the bridge is connected it's working great. The only problem I have seen so far is this:
I've tried to check my email on my blackberry and multi select the emails as I go to delete them. When I delete the emails off my blackberry through the bridge one at a time it works GREAT. However when I use the multi select feature of the PlayBook to choose multiple emails to delete all 5-8 emails at a time I tap DELETE PlayBook ask me if I want to delete on device and/or online and, I choose on device and online. My playbook appears it will delete them like if I had selected one at a time, however it doesn't delete them, it's like the bridge freezes. Playbook acts fine and I can actually exit out of the bridge message window. I have to do a battery pull on my phone (BlackBerry Curve 8530) to get it to unfreeze. I've tried a couple of times with no success on this whole process. This is my first time posting here... Can someone help me with who I need to notify about this to get this issue resolved or at least addressed/duplicated? Anyone have any ideas? I could just individually delete the email but I like the feature of deleting multiple emails by selecting them and placing a "CHECK" beside the ones I would like to delete. Any questions please let me know!
Any help would be GREATLY appreciated!

I can delete multiple messages one at a time on my Bold 9700 way faster than I can multi-select and delete on the Playbook. Sometimes mutli-select works, sometimes it hangs, sometimes it causes Bridge email to just close. On the Bold, delete just works.
Bold 9700 - 6.0.0.448
Playbook 64G - 1.0.3.1868
Bridge - 1.0.0.83

How Do I Filter a Report Using a Multi Select List Box and Specifying Date Between Begin Date and End Date

Hope someone can help. I have tried to find the best way to do this and can't seem to make sense of anything. I'm using an Access 2013 Database and I have a report that is based on a query. I've created a Report Criteria Form. I
need the user to be able to select multiple items in a list box and also to enter a Begin Date and End Date. I then need my report to return only the records that meet all selected criteria. It works fine with a ComboBox and 1 selection but can't
get it to work with a List Box so they can select multiple items. Any help is greatly appreciated while I still have hair left.

The query should return all records.
Let's say you have the following controls on your report criteria form:
txtStart: text box, formatted as a date.
txtEnd: text box, formatted as a date.
lbxMulti: multi-select list box.
cmdOpenReport: command button used to open the report.
The text boxes are used to filter the date/time field DateField, and the list box to filter the number field SomeField.
The report to be opened is rptReport.
The On Click event procedure for the command button could look like this:
Private Sub cmdOpenReport_Click()
Dim strWhere As String
Dim strIn As String
Dim varItm As Variant
On Error GoTo ErrHandler
If Not IsNull(Me.txtStart) Then
strWhere = strWhere & " AND [DateField]>=#" & Format(Me.txtStart, "yyyy-mm-dd") & "#"
End If
If Not IsNull(Me.txtEnd) Then
strWhere = strWhere & " AND [DateField]<=#" & Format(Me.txtEnd, "yyyy-mm-dd") & "#"
End If
For Each varItm In Me.lbxMulti.ItemsSelected
strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
Next varItm
If strIn <> "" Then
' Remove initial comma
strIn = Mid(strIn, 2)
strWhere = strWhere & " AND [SomeField] In (" & strWhere & ")"
End If
If strWhere <> "" Then
' Remove initial " AND "
strWhere = Mid(strWhere, 6)
End If
DoCmd.OpenReport ReportName:="rptMyReport", View:=acViewPreview, WhereCondition:=strWhere
Exit Sub
ErrHandler:
If Err = 2501 Then
' Report cancelled - ignore
Else
MsgBox Err.Description, vbExclamation
End If
End Sub
If SomeField is a text field instead of a number field, change the line
strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
to
strIn = strIn & "," & Chr(34) & Me.lbxMulti.ItemData(varItm) & Chr(34)
Regards, Hans Vogelaar (http://www.eileenslounge.com)

The Control A key is not working. I cannot multi-select my songs. I'm not sure if it is the problem with iTunes 10.6.1.7 or my PC settings encounter issues. Also, i cannot find Album Artwork online using iTunes and i cannot select any view form but List.

The Control A key is not working. I cannot multi-select my songs. I'm not sure if it is the problem with iTunes 10.6.1.7 or my PC settings encounter issues. Also, i cannot find Album Artwork online using iTunes and i cannot select any view form but List.

The Control A key is not working. I cannot multi-select my songs. I'm not sure if it is the problem with iTunes 10.6.1.7 or my PC settings encounter issues. Also, i cannot find Album Artwork online using iTunes and i cannot select any view form but List.

I need a code for Advanced Search based on my custom multi select listbox and query through programatically (jquery)with out design

Hi,
I have a grid and advanced search link buttonand
search button.
if i click on Advanced Search link...open a panel with 3 list boxes(multi selection)
if i select multi selected items in list boxes and click on search-->show the grid with selected items
getting data from Sql server custom database.
And the code i wil expect is 'Programatically using jqury and asp.net code' with out single line of design.
Could you please help on the above task.

Hi,
I have a grid and advanced search link buttonand
search button.
if i click on Advanced Search link...open a panel with 3 list boxes(multi selection)
if i select multi selected items in list boxes and click on search-->show the grid with selected items
getting data from Sql server custom database.
And the code i wil expect is 'Programatically using jqury and asp.net code' with out single line of design.
Could you please help on the above task.

XMLP 5.6.2 - Parameters - Both Multi-Select and All-Select Do Not Work

Both Multi-Select and All-Select Do Not Work.
What's up with this behavior?
And when might it be fixed?
BG...

The Multi-Select is now working, not sure what I did wrong earlier. However the "Can select all" option when building the parameter does not work as advertised, though I was able to get around that as well.
Create a Data Model
select LAST_NAME, FIRST_NAME from SOME_TABLE where SOME_COLUMN =:SOME_VALUE
OR
select LAST_NAME, FIRST_NAME from SOME_TABLE where SOME_COLUMN in (:SOME_VALUE)
Create a LOV
Name = LOV_SOME_COLUMN
Type = SQL Query
select distinct SOME_TABLE.SOME_COLUMN as SOME_COLUMN from SCHEMA.TABLE
Create a Parameter
Identifier = PARM_SOME_COLUMN
Data Type = String
Default Value = NULL
Parameter Type = Menu
Display Label = LOV_SOME_COLUMN
List Of Value = LOV_SOME_COLUMN
Option
Multiple Selection - Checked
Can select all - Checked
Refresh other parameters on change - Checked
Then test your report. Select "All" from the LOV and click view. Result - No Rows Returned.
Selecting a "Single" or "Multiple Values" values from the LOV does work.
The way I am getting around the problem is to uncheck the "Can select all" and then manually select all the values in the LOV in order to get the "All".
BG...

OnSubmit and Multi-Select

Similar Messages

Maybe you are looking for