OOB Approval Workflow does not update WorkflowStatus column as "In Progress"

Dear Experts,
Any advice will be most appreciated. Here is the scenario
Repository: document library
Workflows: OOB Approval Workflow is turned on
User Action: User uploads multiple documents (say 5 or 10) to the document library
the workflow status column is not marked as "In Progress" for some of the documents. Out of say 10 documents, 6 to 7 have "In Progress" in the workflow status column and the remaining 3 to 4 don't have it! 
It is very critical to have this field updated.
Alternatives: Currently it seems like the only way to update the blank workflow status column is to delete the document and re-upload it.
Solution tried: Tried turning off "Update Content Approval" option in the workflow settings. No use.
 

I've found out more about this. The workflow itself starts, but the workflow status column does not get updated as "In Progress" or "Approved". Its just blank.
Whats even more interesting is that it fails if the web app's port number is 80 (URL in this case will be http://server_name/doc_lib)
but it works perfectly if the port number is anything other than 80! (URL in this case will be http://server_name:port_number/doc_lib)
Any clues as to why it behaves this way?
Thanks in advance,
NP

Similar Messages

  • Approval Workflow does not update the Content Approval status if started automatically

    Hi,
    I’m using a simple Approval Workflow associated with
    Content Approval on site pages. It works fine when I set it to be started manually (by using
    Allow this workflow to be manually started by an authenticated user with Edit Item permissions
     option) and on the completion of the workflow the
    Content Approval status is updated accordingly. But when I set it to be started automatically (by using
    Start this workflow when a new item is created
     / Start this workflow when an item is changed
    options), it does not updates the Content Approval status. Note that I’ve set the
    Update the approval status after the workflow is completed (use this workflow to control content approval)
    option to true.
    Regards

    Hello,
    It is recommended to select "Start this workflow to approve publishing a major version of an item" when you want to use the workflow to manage content approval for
    a library.
    According to the Notes for “Enable Content Approval” option in
    this reference:
    If you are using this Approval workflow to manage content approval (moderation) for a library, and you selected the Start this workflow to approve publishing a major version
    of an item check box on the Add a Workflow page..
    If you did not select the Start this workflow to approve publishing a major version of an item check box on the Add a Workflow page because you do not want this workflow to
    be the default content approval workflow for a library, you can select the Update the approval status (use this workflow to control content approval) check box to make this workflow a secondary content approval workflow that specific users can
    start manually.
    That means having an approval workflow start automatically when a document is changed or created is not a good practice when you want to use the workflow to manage
    content approval for a library. You should either select "Start this workflow to approve publishing a major version of an item" or give users the option to start the workflow manually at the time they want to submit for an approval.
    Thanks & Regards.
    Lily Wu

  • Automatic approval workflow does not work anymore

    Hi,
    Our automatic approval workflows configured via standard business configuration sets (process controlled) do not work anymore. They did work previously.
    After changing the BUS objects 'automatic approval' workflow into the 1-step manager approval workflow it does work.
    - The 'automatic approval' workflow does not seem to generate a workitem, the bbp_pd 'workflow' part is empty. In addition previously approved documents via 'automatic approval' do not contain workitem details via bbp_pd either anymore.
    - We applied a new SP (SP07) not that long ago.
    - These documents go into status: 'awaiting approval', the documents 'approval' details tell us the following:
    001 Automatic Approval Valid (Can be Started) Open (No Decision Made) SYSTEM system
    However the system does not execute the task, how come? What normally ensures the system executes these 'automatic approval' tasks (report?)?
    Any input is very much appreciated.
    Kind regards,
    Tim

    Hi Balaji,
    In SRM 7.0,
    Our automatic approval workflows configured via standard business configuration sets (process controlled) do not work anymore. They did work previously.
    - The 'automatic approval' workflow does not seem to generate a workitem, the bbp_pd 'workflow' part is empty. In addition previously approved documents via 'automatic approval' do not contain workitem details via bbp_pd either anymore.
    - - These documents go into status: 'awaiting approval', the documents 'approval' details tell us the following:
    001 Automatic Approval Valid (Can be Started) Open (No Decision Made) SYSTEM system
    However the system does not execute the task, how come? What normally ensures the system executes these 'automatic approval' tasks (report?)?
    Any input is very much appreciated.
    Regards,
    Shears

  • After the in place upgrade from SharePoint server 2007 to 2010, the out of the box approval workflow does not prompt for additional information after check in of a major version.

    I think it has to do with the interaction between Word, InfoPath, IIS, and /or SharePoint, but I cannot put my finger on it.  Maybe client integration or authentication settings?  I have looked at it in wireshark
    and have not seen anything glaring.
    Steps to reproduce the (working) behavior:
    Set up a document library in SharePoint 2010.
    Under versioning settings, make the following changes:
    Set Require Content Approval for submitted Items to Yes
    Select Create Major and Minor (draft) versions
    Set require checkout to Yes
    Create an out of the box “approval” workflow with the following settings:
    Start this workflow to approve publishing a major version of an item.
    I then create a new document. Save it.  check it in.  it is now version 0.1.
    I then open it again. check it out.  Make a change. Close and save it.
    Check it in.
    Publish major version:
    At this point a screen is presented to me to enter workflow parameters.  This screen comes up in Enterprise 2013 and MOSS 2007, but not the migrated version of 2010:
    This is what I need help with.  It should come up in 2010.  To fix it in 2013, I had to change the IIS bindings to only have 1 entry for a port.  I did this for 2010 and it did not work.
    Any help or ideas is very appreciated.  Thanks very much in advance.

    Hi Chris,
    According to your description, my understanding is that the approval workflow cannot work when the workflow was set to start to approve publishing a major version of an item after upgrading to SharePoint 2010.
    I recommend to check the approval workflow in Workflow settings of the corresponding library to see if the Start this workflow to approve publishing a major version of an item is checked.
    For test, I recommend to create a new OOB approval workflow and set it to start to approve publishing a major version of an item in the same library to see if the workflow can work.
    Thanks
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

    Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
    working fine and no changes were made to the workflow.
    I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
    to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
    are), but we still cannot figure out why the workflow is still throwing this error.
    We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
    The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type. 
    The form associated with the list was modified in InfoPath 2010. 
    Approvers would provide their approval in the InfoPath form which is then read by the workflow.
    Side note - items created after the workflow throws this Unknown Error some seem to be working fine. 
    We have deleted the item in question and re-added it with no effect. 
    Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
    Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
    Cheers

    Hi,
    I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
    If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

       I got error  "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I  found out the cause is  Update Item action       
    I need to update item in another List call Customer Report ,the field call "Issues"  with data type  "Choice"   to yes
    then the error arise .   please help..

    Thanks for the quick response Nikhil.
    Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
    Site Lists
    Engagements = 4456 (Errors on this list, primary list for activity)
    Tasks = 7711  (All workflow tasks from all site lists)
    Clients = 4396  (Lookup from Engagements, Tslips, etc)
    Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
    Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
    A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
    Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

  • OOB Approval Workflow Not Working as Expected

    I am using the OOB Approval Workflow with an InfoPath (Browser Based) form that is published to a form library. The form contains multiple options for approvers that route serially.  I open the form, fill it out, and submit it to the library. The
    approval workflow is set to automatically start when an item is created. When the first Item is created the it works correctly. The workflow's task status is "In Progress" and the workflow assigns a task to the person selected in the person/group
    picker on the Infopath form. 
    The issue is when I submit a second form to the library. The workflow automatically sets the the "Outcome" to "Rejected" and never assigns a task to the person selected in the person/group picker on the Infopath form. See below:

    check the ULS logs and share the more details why its auto rejected.
    you can configure the Diagnostic Log as verbose for Workflow.
    http://technet.microsoft.com/en-us/library/jj658588.aspx
    share the result.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Workflow 12300111 not updating data .

    Hi experts,
    i am trying to use workflow 12300111 for ESS leave request .
    the workflow is not updating the values in the table for absence ie; PA2001
    Please  suggest what can be done .
    thanks in advace,
    Naval bhatt

    @ Arg
    which method do we have to use in TS12300097
    i have tried with 
    class - CL_PT_REQ_WF_ATTRIBS
    method- APPROVE
    and
    BO -ABSENCE
    method- APPROVE
    please suggest me if i am doing something wrong in this .
    please tell me  which roles are required for updating the absence.
    thanks,
    Naval

  • Book editing - change a photo, book does not update

    We are having a small problem. When editing our book, we double on some photos to edit them. Crop, color adjust, etc. Then we click done, and get sent back to our Book page.
    Now about half the time the book preview does not update the image that we just changed. It seems to update the larger full page images more often than it updates the smaller images in the book layout. If I double click the photo again, I can see the change I previously made are still there, but they are not being reflected in the book preview.
    So 2 questions, how do I force the book to update its photo preview? And if I print this will it use the edited photo, and not the version its showing me in the preview?
    Assume this is just a screen display issue, and that the generated print will use the right assets, right?
    This is in iLife '08 on Leopard on an intel Macbook.

    Squeegy:
    Welcome to the Apple Discussions. Try changing the layout, i.e. from frames with or without text to the other and then back. That may jump start the picture to display properly. It works for me when I do some cropping, like from landscape to portrait and the frame doesn't reset itself.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • CMP : Table does not have a column named ...

    Hello All,
    The following error is generated while verifying CMP bean before deployment with asant tool.
    The table and field are present in the database, is there any way to debug whats wrong?
    Error:
    The table XYZ does not have a column named ABC
    Test Name : tests.ejb.ias.cmpmapping.ASSunCmpMappingTest
    Test Assertion :
    Test Description : FAILED [JDO-GEN-CMP-Validation] : Unexpected exception occured while initializing JDOCodeGenerator, for the mapping file [ META-INF/sun-cmp-mappings.xml ], of the ejb archive [ SchemeEJB ] .Check stacktrace for details :
    [ java.lang.RuntimeException: The table XYZ does not have a column named ABC[/b]
    The following error is reported. But in reality there is a column name(ABC) in the table(XYZ).
    Thanx in Advance
    Rgds,
    Girish.
    Here is the cmp-mapping.xml we are using
    <sun-cmp-mappings>
    <sun-cmp-mapping>
    <schema>SchemeEJB</schema>
    <entity-mapping>
    <ejb-name>SchemeEJB</ejb-name>
    <table-name>SCHEMES</table-name>
    <cmp-field-mapping>
    <field-name>schemeDeptCode</field-name>
    <column-name>SC_DEPT_CODE</column-name>
    </cmp-field-mapping>
    <cmp-field-mapping>
    <field-name>schemeCode</field-name>
    <column-name>WF_SCHEME_CODE</column-name>
    </cmp-field-mapping>
    <cmp-field-mapping>
    <field-name>schemeEnName</field-name>
    <column-name>EN_NAME</column-name>
    </cmp-field-mapping>
    <cmp-field-mapping>
    <field-name>schemeUcdName</field-name>
    <column-name>UCD_NAME</column-name>
    </cmp-field-mapping>
    <cmp-field-mapping>
    <field-name>schemeStartDate</field-name>
    <column-name>START_DATE</column-name>
    </cmp-field-mapping>
    <cmp-field-mapping>
    <field-name>schemeEndDate</field-name>
    <column-name>END_DATE</column-name>
    </cmp-field-mapping>
    <cmp-field-mapping>
    <field-name>isActive</field-name>
    <column-name>IS_ACTIVE</column-name>
    </cmp-field-mapping>
    <cmp-field-mapping>
    <field-name>enShortDescription</field-name>
    <column-name>EN_SHORT_DESC</column-name>
    </cmp-field-mapping>
    <cmp-field-mapping>
    <field-name>enLongDescription</field-name>
    <column-name>EN_LONG_DESC</column-name>
    </cmp-field-mapping>
    <cmp-field-mapping>
    <field-name>ucdShortDescription</field-name>
    <column-name>UCD_SHORT_DESC</column-name>
    </cmp-field-mapping>
    <cmp-field-mapping>
    <field-name>ucdLongDescription</field-name>
    <column-name>UND_LONG_DESC</column-name>
    </cmp-field-mapping>
    <cmp-field-mapping>
    <field-name>sponsererCode</field-name>
    <column-name>SPONSERER</column-name>
    </cmp-field-mapping>
    <cmp-field-mapping>
    <field-name>userId</field-name>
    <column-name>WS_USER_ID</column-name>
    </cmp-field-mapping>
    <cmp-field-mapping>
    <field-name>createdDate</field-name>
    <column-name>WS_CREATED_DATE</column-name>
    </cmp-field-mapping>
    <cmp-field-mapping>
    <field-name>lastModified</field-name>
    <column-name>WS_LAST_MODIFIED</column-name>
    </cmp-field-mapping>
    </entity-mapping>
    </sun-cmp-mapping>
    </sun-cmp-mappings>

    This is almost always the case when using CMP and the schema hasn't been updated after adding the new column to the database. This has happened to me multiple times in the past month.
    I'm referring to the <schema> element under the <sun-cmp-mapping> element in the sun-cmp-mappings.xml deployment descriptor that's generated from the capture-schema utility.
    I'm 99% certain this is what you're encountering.

  • Bug in PL/SQL - Does not update Table if table name & variable name same in

    Dear All,
    If tabale name & vairable name is same in a Stored Procedure, UPDATE to table does not take place.
    For example run following 2 procedures. First procedure does the insert properly to table but second procedure does not update the table.
    create or replace procedure BugDemo1
    as
    LAST_NAME VARCHAR2(30);
    FIRST_NAME VARCHAR2(30);
    Begin
    LAST_NAME := 'Prasad';
    FIRST_NAME := 'Raghnandan';
    Insert into com_people (id,Roles, LAST_NAME, FIRST_NAME) values (77777,'Patient', LAST_NAME, FIRST_NAME);
    end;
    create or replace procedure BugDemo2
    as
    LAST_NAME VARCHAR2(30);
    FIRST_NAME VARCHAR2(30);
    Begin
    LAST_NAME := 'Pra';
    FIRST_NAME := 'Raghu';
    Update com_people set
    LAST_NAME = LAST_NAME,
    FIRST_NAME = FIRST_NAME
    where id = 77777 ;
    end;
    ------------------------------------------

    Hi,
    It is not a bug. Oracle is updating the records. Here Oracle is treating the variable name as COLUMN_NAME. Since priority is higher for a COLUMN on variable so each column is getting updated by itself resulting no change in data.
    SQL> CREATE TABLE com_people
      2  (
      3  id NUMBER (5),
      4  Roles VARCHAR2(20),
      5  LAST_NAME  VARCHAR2(20),
      6  FIRST_NAME VARCHAR2(20)
      7  )
      8  ;
    Table created
    SQL> Insert into com_people (id,Roles, LAST_NAME, FIRST_NAME) values (77777,'Patient', 'LAST_NAME', 'FIRST_NAME');
    1 row inserted
    SQL> COMMIT;
    Commit complete
    SQL>
    SQL> create or replace procedure BugDemo2
      2  as
      3  LAST_NAME VARCHAR2(20);
      4  FIRST_NAME VARCHAR2(20);
      5  Begin
      6  LAST_NAME := 'Pra';
      7  FIRST_NAME := 'Raghu';
      8 
      9  Update com_people set
    10  LAST_NAME = LAST_NAME,
    11  FIRST_NAME = FIRST_NAME
    12  where id = 77777 ;
    13 
    14  DBMS_OUTPUT.PUT_LINE('UPDATED ROWS ='||SQL%ROWCOUNT);
    15  end;
    16  /
    Procedure created
    SQL> set serveroutput on
    SQL> execute BugDemo2;
    UPDATED ROWS =1
    PL/SQL procedure successfully completed
    SQL> Regards

  • Sharepoint 2013 workflow does not start when item is created by another workflow

    Hi I am having the next problem, I have a workflow on list B that starts when a new item is created. If I created the item manually the workflow works. Now I have a list A that has a workflow that creates a new item in List B. The problem is that when
    de workflow in list A creates the list item in list B the workflow does not start.
    I've used an account that is collection owner, an account that only has contribute permision and nothing works.
    Any ideas?
    0down
    votefavorite
    Hi I am having the next problem, I have a workflow on list B that starts when a new item is created. If I created the item manually the workflow works. Now I have a list A that has a workflow that creates a new item in List B. The problem is that when de workflow
    in list A creates the list item in list B the workflow does not start.
    I've used an account that is collection owner, an account that only has contribute permision and nothing works.
    Any ideas?
    0down
    votefavorite
    Hi I am having the next problem, I have a workflow on list B that starts when a new item is created. If I created the item manually the workflow works. Now I have a list A that has a workflow that
    creates a new item in List B. The problem is that when de workflow in list A creates the list item in list B the workflow does not start.
    I've used an account that is collection owner, an account that only has contribute permision and nothing works.
    Any ideas?

    Hi Courfeyrak,
    Here is another similar post with a workaround, you can try using the event receiver on listB item to start the workflow, when the listB item is created or updated by the workflow associated with listA.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/19f71e38-7c04-430e-aa6b-764cbbf18c1c/2013-workflow-does-not-start-on-item-created-by-a-different-worklow?forum=sharepointcustomization
    Thanks,
    Daniel Yang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Daniel Yang
    TechNet Community Support

  • Workflow does not work properly

    Hi experts,
    I had configure approval process for my folder. The problem is when i upload a file, there is no email sent for approval. I have a FSDB repository. What went wrong? Appreciate any suggestions.
    Thanks,
    Nanie

    Hello,
    Workflow does not start automatically by uploading documents.
    You have to Submit for Approval these documents.
    Regards
    BP

  • Paged dataset does not update it's child dataset

    My paged dataset works great, except on refreshing it's child
    dataset, when sorting or navigating from page to page.
    Clicking on the record in the paged dataset does return the
    correct child dataset record. Clicking on any of the column headers
    to sort the paged dataset or clicking on any of the page functions,
    i.e. Next Page, Previous page, does not update the child dataset
    record.
    The first record of the paged dataset is set to 'selected',
    after sort or page navigation function.
    What am I missing?
    Here is the code that updates the child dataset record:
    onClick="pvPOrders.setCurrentRow('{ds_RowID}');"
    Here is the sort:
    onclick="dsPOrders.sort('PONUM','toggle');"
    Here is the page navigation:
    onclick="pvPOrders.nextPage();"
    There are no observers. The code can be viewed here:
    http://codeshare.ulatu.com/mare3184

    Hi Doug,
    You shouldn't have to do the manual setting of the
    currentRow. The fact that your code snippet here:
    http://codeshare.ulatu.com/mare3184
    Has your PagedView data set pvPOrders depending on dsPOrders
    means that when you set the current row on pvPOrders it just
    forwards the set request on to dsPOrders.
    I'm a bit confused by the other snippet you posted here:
    http://codeshare.ulatu.com/marc0722
    because I don't see any mention of a PagedView in that
    snippet. In any case, I mocked up something that should be similar
    to your situation, and it seems to work just fine:
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
    Transitional//EN" "
    http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="
    http://www.w3.org/1999/xhtml"
    xmlns:spry="
    http://ns.adobe.com/spry">
    <head>
    <meta http-equiv="Content-Type" content="text/html;
    charset=utf-8" />
    <title>Untitled Document</title>
    <script src="includes/xpath.js"
    type="text/javascript"></script>
    <script src="includes/SpryData.js"
    type="text/javascript"></script>
    <script src="includes/SpryPagedView.js"
    type="text/javascript"></script>
    <script type="text/javascript">
    <!--
    var dsStates = new
    Spry.Data.XMLDataSet("data/states/states.xml", "/states/state");
    var dsCities = new
    Spry.Data.XMLDataSet("data/states/{dsStates::url}",
    "/state/cities/city");
    var pvStates = new Spry.Data.PagedView(dsStates, { pageSize:
    5 });
    //-->
    </script>
    <style type="text/css">
    <!--
    .hover {
    background-color: #FFCCFF;
    .select {
    background-color: #6699FF;
    -->
    </style>
    </head>
    <body>
    <input type="button" value="Prev"
    onclick="pvStates.previousPage()" /><input type="button"
    value="Next" onclick="pvStates.nextPage()" />
    <p>Select a State:</p>
    <div spry:region="pvStates dsStates">
    <div>{pvStates::ds_PageNumber} of
    {pvStates::ds_PageCount}</div>
    <ul spry:repeatchildren="pvStates" spry:choose="">
    <li spry:when="{pvStates::ds_RowID} ==
    {dsStates::ds_CurrentRowID}" spry:setrow="pvStates"
    spry:hover="hover" spry:select="select" spry:selected="">
    {pvStates::name}
    </li>
    <li spry:default="" spry:setrow="pvStates"
    spry:hover="hover" spry:select="select">
    {pvStates::name}
    </li>
    </ul>
    </div>
    <p>Cities for the currently selected state:</p>
    <div spry:region="dsCities"
    spry:repeatchildren="dsCities">
    {name}
    </div>
    </body>
    </html>
    --== Kin ==--

  • Real time ROLAP or Automatic molap cubecube does not update the value

    Hello Everyone,
    I am working with Real time Rolap and Automatic MOLAP cube. I had created cube using AdventureWorks DW sample given by Microsoft Tutorial. when i fire insert query, It updates data. It works fine in both the cases after reconnecting in SSMS and SSAS browser.
    But I have a one database table in SQL server with 4 varchar and 10 numeric fields [simple table with one primary key without any relationship with other table]. I tried to create both type of cube from direct database table [selecting varchar fields as
    dimensions and numeric as measures], created partitions, specified server side tracking table. It processes the cube. but when i add rows into this table. It inserts record but does not update in SSAS browser or SSMS browser.
    Please help me what is the problem???
    Thanks in Advance!

    I noticed the same behavior reported by Bob: Not regarding the "process filter" or the "update frequency" selected "CPU Time" column is only updated when details dialog is open. I noticed it just today (which triggered the search here), I wonder if this "feature" has been always present or maybe activity monitor is getting lazy?
    Regards,
    Mauro

Maybe you are looking for