Opatch Issue (Fusion Middleware Home is Corrupted)

I posted a screenshot of the issue here http://i.imgur.com/ejqkk.png
I would appreciate any help!!!

Are you sure you are patching the correct version, the patch you are applying is for 11.1.2.2 yet you are using the java directory for 11.1.2.1
<MIDDLEWARE_HOME>\jdk160_29 is for 11.1.2.2
<MIDDLEWARE_HOME>\jdk160_21 is for 11.1.2.1
If your base install is 11.1.2.1 then you need to apply 11.1.2.1.x patches
If it is 11.1.2.2 then you need to use the correct java directory.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Fusion Middleware clone

Hello All
I want to clone Fusion middleware home to a new machine from existing installation of IDM, forms, reports. I am looking for file copyBinary.sh but unable to find it in middlware home. According to Oracle documenation it should be in ORACLE_COMMON_HOME, but I can't find even common home.
Could someone please tell me where do I find this script OR does it only get installed with SOA installation.
Regards
Amit

It would be in... <your WLS base directory>\oracle_common\bin
I've just confirmed it exists in WLS 10.3.4 + forms/reports, a WLS 10.3.5 + SOA, and a WLS 10.3.5 + app dev CD installations. I don't have a plain WLS install at the moment to verify it's there, but you can now check for yourself.
John

Fusion Middleware Provisioning Deployment Procedure - Failing

Hi,
I have been trying to run the Fusion Middleware Provisioning (version 4.1) deployment procedure by choosing the existing installation as Fusion Middleware Home.
Going through the logs, the perl script (applyclone.pl) is unable to create the destination directory. However, I am unable to find the cause for it. Also, the directive "Create FMW Clone Archive" generates the following log - with error "Oracle home is not cloneable".
Any help would be highly appreciated. Thanks.
Below are details :
OEM version 11g installed on Linux box.
Source Machine - Windows, Agent version 11g
Target Machine - Windows, Agent version 11g
- Dinu
Logs -
Job Log -
Run privilege of the step is : Normal
This is Provisioning Executor Script(Windows)
Input PropertyFilePath is D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a76852aae040b40a7f161fef\properties
Input directiveScriptFilePath is D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a76852aae040b40a7f161fef\applyClone.pl
Input directiveTypeProperty is NAME_Executor
Input componentPath is null
Input directivePath is Directive
Input componentFilename is null
Directive Type is SUB_Perl
Dir to CD is D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a76852aae040b40a7f161fef
Final command line to execute is %PERL_HOME%\perl "D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a76852aae040b40a7f161fef\applyClone.pl" -java_home "D:\Agent11g\agent11g/jdk" -cloning_jar "cloningclient.jar" -archive "D:\wkd//20101102061046/wls_prov/archive.jar" -mwhome "D:\fmwtest" -log_dir "D:\wkd//20101102061046" -work_dir "D:\wkd//20101102061046"
The output of the directive is:
Unable to create directory at D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a76852aae040b40a7f161fef\applyClone.pl line 38.
Creating directory: D:\wkd//20101102061046/wls_prov/
Creating MW directory:
OMS Log (For brevity's sake, only mentioning from the point it says 'Failed')
INFO: _receiving event StatusChangedEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A76752AAE040B40A7F161FEF , data = null , reason = Job Failed]
Nov 2, 2010 6:20:29 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ProcedureStateImpl [ Inst Name: Fusion Middleware Provisioning_2010-11-02_06-10-46PM GUID: 918CBF4A67A5FADDE040B40A7F161FDE ]: Received Event: StatusChangedEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A76752AAE040B40A7F161FEF , data = null , reason = Job Failed]
Nov 2, 2010 6:20:29 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ProcedureStateImpl [ Inst Name: Fusion Middleware Provisioning_2010-11-02_06-10-46PM GUID: 918CBF4A67A5FADDE040B40A7F161FDE ]: Received Event: StatusChangedEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A76752AAE040B40A7F161FEF , data = null , reason = Job Failed]
Nov 2, 2010 6:20:29 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ParallelStateImpl [ Phase Name: FMWPROV_TRS_CLONE_ARC_TO_MWH_NAME GUID: 931F3D44A75E52AAE040B40A7F161FEF ]: Event recd: StatusChangedEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A76752AAE040B40A7F161FEF , data = null , reason = Job Failed]
Nov 2, 2010 6:20:29 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ParallelStateImpl [ Phase Name: FMWPROV_TRS_CLONE_ARC_TO_MWH_NAME GUID: 931F3D44A75E52AAE040B40A7F161FEF ]: Broadcasting event to all child states
Nov 2, 2010 6:20:29 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ParallelStateImpl [ Phase Name: FMWPROV_TRS_CLONE_ARC_TO_MWH_NAME GUID: 931F3D44A75E52AAE040B40A7F161FEF ]: Firing event StatusChangedEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A76752AAE040B40A7F161FEF , data = null , reason = Job Failed] to tgtState TargetStateImpl [ TargetName: IFLMUD5HP0645.i-flex.com TargetType: host GUID: 931F3D44A75F52AAE040B40A7F161FEF ]
Nov 2, 2010 6:20:29 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: TargetStateImpl [ TargetName: IFLMUD5HP0645.i-flex.com TargetType: host GUID: 931F3D44A75F52AAE040B40A7F161FEF ]: Received Event: StatusChangedEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A76752AAE040B40A7F161FEF , data = null , reason = Job Failed]
Nov 2, 2010 6:20:29 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: JobProducerStateImpl [ Step Name: FMWPROV_APPLY_CLONE_TRG_NAME GUID: 931F3D44A76752AAE040B40A7F161FEF ]: Receive Event: StatusChangedEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A76752AAE040B40A7F161FEF , data = null , reason = Job Failed]
Nov 2, 2010 6:20:29 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: JobProducerStateImpl [ Step Name: FMWPROV_APPLY_CLONE_TRG_NAME GUID: 931F3D44A76752AAE040B40A7F161FEF ]: Updating job status: 4 of this state and saving to repository
Nov 2, 2010 6:20:29 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: JobProducerStateImpl [ Step Name: FMWPROV_APPLY_CLONE_TRG_NAME GUID: 931F3D44A76752AAE040B40A7F161FEF ]: Step failed, firing status update event
Nov 2, 2010 6:20:29 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
INFO: JobProducerStateImpl [ Step Name: FMWPROV_APPLY_CLONE_TRG_NAME GUID: 931F3D44A76752AAE040B40A7F161FEF ]: [Updating status: STEPGUID = 918CBF4A5F83FADDE040B40A7F161FDE STATEGUID = 931F3D44A76752AAE040B40A7F161FEF STEPNAME = FMWPROV_APPLY_CLONE_TRG_NAME OLDSTATUS = Running NEWSTATUS = Failed ]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: JobProducerStateImpl [ Step Name: FMWPROV_APPLY_CLONE_TRG_NAME GUID: 931F3D44A76752AAE040B40A7F161FEF ]: error mode stop on error.
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: JobProducerStateImpl [ Step Name: FMWPROV_APPLY_CLONE_TRG_NAME GUID: 931F3D44A76752AAE040B40A7F161FEF ]: Processing event StatusUpdateEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A76752AAE040B40A7F161FEF , reason = Job Failed , status = Failed]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: JobProducerStateImpl [ Step Name: FMWPROV_APPLY_CLONE_TRG_NAME GUID: 931F3D44A76752AAE040B40A7F161FEF ]: Updating job status: 4 of this state and saving to repository
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: TargetStateImpl [ TargetName: IFLMUD5HP0645.i-flex.com TargetType: host GUID: 931F3D44A75F52AAE040B40A7F161FEF ]: Processing event StatusUpdateEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A76752AAE040B40A7F161FEF , reason = Job Failed , status = Failed]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: TargetStateImpl [ TargetName: IFLMUD5HP0645.i-flex.com TargetType: host GUID: 931F3D44A75F52AAE040B40A7F161FEF ]: Setting status to : Failed
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
INFO: TargetStateImpl [ TargetName: IFLMUD5HP0645.i-flex.com TargetType: host GUID: 931F3D44A75F52AAE040B40A7F161FEF ]: [Updating status: STEPGUID = 918CBF4A5F80FADDE040B40A7F161FDE STATEGUID = 931F3D44A75F52AAE040B40A7F161FEF STEPNAME = FMWPROV_TRS_CLONE_ARC_TO_MWH_NAME OLDSTATUS = Running NEWSTATUS = Failed ]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: TargetStateImpl [ TargetName: IFLMUD5HP0645.i-flex.com TargetType: host GUID: 931F3D44A75F52AAE040B40A7F161FEF ]: Firing status update event to parent.
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: TargetStateImpl [ TargetName: IFLMUD5HP0645.i-flex.com TargetType: host GUID: 931F3D44A75F52AAE040B40A7F161FEF ]: Processing event StatusUpdateEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A75F52AAE040B40A7F161FEF , reason = Job Failed , status = Failed]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ParallelStateImpl [ Phase Name: FMWPROV_TRS_CLONE_ARC_TO_MWH_NAME GUID: 931F3D44A75E52AAE040B40A7F161FEF ]: processing event StatusUpdateEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A75F52AAE040B40A7F161FEF , reason = Job Failed , status = Failed]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ParallelStateImpl [ Phase Name: FMWPROV_TRS_CLONE_ARC_TO_MWH_NAME GUID: 931F3D44A75E52AAE040B40A7F161FEF ]: Setting status to : Failed
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
INFO: ParallelStateImpl [ Phase Name: FMWPROV_TRS_CLONE_ARC_TO_MWH_NAME GUID: 931F3D44A75E52AAE040B40A7F161FEF ]: [Updating status: STEPGUID = 918CBF4A5F80FADDE040B40A7F161FDE STATEGUID = 931F3D44A75E52AAE040B40A7F161FEF STEPNAME = FMWPROV_TRS_CLONE_ARC_TO_MWH_NAME OLDSTATUS = Running NEWSTATUS = Failed ]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ParallelStateImpl [ Phase Name: FMWPROV_TRS_CLONE_ARC_TO_MWH_NAME GUID: 931F3D44A75E52AAE040B40A7F161FEF ]: Firing status update event to parent. ParallelStateImpl [ Phase Name: FMWPROV_TRS_CLONE_ARC_TO_MWH_NAME GUID: 931F3D44A75E52AAE040B40A7F161FEF ]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ParallelStateImpl [ Phase Name: FMWPROV_TRS_CLONE_ARC_TO_MWH_NAME GUID: 931F3D44A75E52AAE040B40A7F161FEF ]: Processing event StatusUpdateEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A75E52AAE040B40A7F161FEF , reason = Job Failed , status = Failed]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ProcedureStateImpl [ Inst Name: Fusion Middleware Provisioning_2010-11-02_06-10-46PM GUID: 918CBF4A67A5FADDE040B40A7F161FDE ]: Processing event StatusUpdateEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A75E52AAE040B40A7F161FEF , reason = Job Failed , status = Failed]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ProcedureStateImpl [ Inst Name: Fusion Middleware Provisioning_2010-11-02_06-10-46PM GUID: 918CBF4A67A5FADDE040B40A7F161FDE ]: Setting status to : Failed
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
INFO: ProcedureStateImpl [ Inst Name: Fusion Middleware Provisioning_2010-11-02_06-10-46PM GUID: 918CBF4A67A5FADDE040B40A7F161FDE ]: [Updating status: STEPGUID = 918CBF4A5FBAFADDE040B40A7F161FDE STATEGUID = 918CBF4A67A5FADDE040B40A7F161FDE OLDSTATUS = Running NEWSTATUS = Failed ]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ProcedureStateImpl [ Inst Name: Fusion Middleware Provisioning_2010-11-02_06-10-46PM GUID: 918CBF4A67A5FADDE040B40A7F161FDE ]: Firing status update event to parent.
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ProcedureStateImpl [ Inst Name: Fusion Middleware Provisioning_2010-11-02_06-10-46PM GUID: 918CBF4A67A5FADDE040B40A7F161FDE ]: Processing event StatusUpdateEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 918CBF4A67A5FADDE040B40A7F161FDE , reason = Job Failed , status = Failed]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ProcedureStateImpl [ Inst Name: Fusion Middleware Provisioning_2010-11-02_06-10-46PM GUID: 918CBF4A67A5FADDE040B40A7F161FDE ]: Discarding event: StatusUpdateEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 918CBF4A67A5FADDE040B40A7F161FDE , reason = Job Failed , status = Failed]
Logs for "Create FMW Clone Archive" Job -
Run privilege of the step is : Normal
This is Provisioning Executor Script(Windows)
Input PropertyFilePath is D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a75952aae040b40a7f161fef\properties
Input directiveScriptFilePath is D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a75952aae040b40a7f161fef\createClone.pl
Input directiveTypeProperty is NAME_Executor
Input componentPath is null
Input directivePath is Directive
Input componentFilename is null
Directive Type is SUB_Perl
Dir to CD is D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a75952aae040b40a7f161fef
Final command line to execute is %PERL_HOME%\perl "D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a75952aae040b40a7f161fef\createClone.pl" -cloning_jar "cloningclient.jar" -archive "D:\wkd//20101102061046/archive.jar" -mwhome "C:\oracle\Middleware" -exp "*.xxx" -soh "n/a" -log_dir "D:\wkd"
The output of the directive is:
Creating directory: D:\wkd//20101102061046/
created.
found WLS Home:C:\oracle\Middleware\wlserver_10.3
got C:\oracle\Middleware\wlserver_10.3
Reading properties from C:\oracle\Middleware\wlserver_10.3\.product.properties
JAVA_HOME=C:\Oracle\Middleware\jdk160_14_R27.6.5-32
C:\Oracle\Middleware\jdk160_14_R27.6.5-32\bin\java.exe
D:\wkd//20101102061046/archive.jar
Executing: C:\Oracle\Middleware\jdk160_14_R27.6.5-32\bin\java.exe -jar "C:\oracle\Middleware\oracle_common\jlib\cloningclient.jar" createclone -al "D:\wkd//20101102061046/archive.jar" -smw "C:\oracle\Middleware" -silent true -ldl D:\wkd
Log File : "D:\wkd\CLONE2010-11-02_06-12-27PM.log" .
Error File : "D:\wkd\CLONE2010-11-02_06-12-27PM.error" .
2010-11-02_06-12-28PM : INFO : CLONE-21130 The component Dummy Top Component under Oracle home C:\oracle\Middleware\oracle_common is not cloneable.
2010-11-02_06-12-28PM : INFO : CLONE-21130 The component Bogus under Oracle home C:\oracle\Middleware\oracle_common is not cloneable.
2010-11-02_06-12-28PM : ERROR : CLONE-20280 Oracle home is not cloneable.
2010-11-02_06-12-28PM : CAUSE : CLONE-20280 Some component(s) under the Oracle home C:\oracle\Middleware\oracle_common were not cloneable.
2010-11-02_06-12-28PM : ACTION : CLONE-20280 Make sure that all components in the Oracle home are cloneable.
2010-11-02_06-12-28PM : INFO : CLONE-21009 The list of Middleware home that will be included in the archive is =
C:\oracle\Middleware .
2010-11-02_06-12-28PM : INFO : CLONE-21013 Primary validation prior to clone operation is successful for C:\oracle\Middleware.
2010-11-02_06-12-28PM : INFO : CLONE-21154 Checking free space availability for createClone operation.
2010-11-02_06-12-30PM : INFO : CLONE-21155 Required free space is available for createClone operation.
2010-11-02_06-12-32PM : INFO : CLONE-21095 Create archive for C:\oracle\Middleware started .... at 2010-11-02_06-12-32PM.
2010-11-02_06-12-32PM : INFO : CLONE-21166 Addition of the Middleware home C:\oracle\Middleware to the archive started....
2010-11-02_06-12-34PM : INFO : CLONE-21167 Creating archive of Middleware home C:\oracle\Middleware ....
2010-11-02_06-15-35PM : INFO : CLONE-21168 Creating archive of Middleware home C:\oracle\Middleware finished .
2010-11-02_06-15-35PM : INFO : CLONE-21169 Adding archive of Middleware home C:\oracle\Middleware to the main jar file started.....
2010-11-02_06-15-35PM : INFO : CLONE-21053 Total size of the file(s) , to be included in the main jar from source location D:\wkd = 0.421 GB .
2010-11-02_06-16-49PM : INFO : CLONE-21055 100% completed in "73" seconds, and "0" more seconds required.
2010-11-02_06-16-49PM : INFO : CLONE-21170 Adding archive of Middleware home C:\oracle\Middleware to the main jar file finished .
2010-11-02_06-16-49PM : INFO : CLONE-21096 Time taken for this process =257015 milli sec.
2010-11-02_06-16-49PM : INFO : CLONE-21030 Adding "C:\oracle\Middleware" to the archive is successful.
2010-11-02_06-16-53PM : INFO : CLONE-21031 Time taken to add all the cloners to archive ="262,266" milli seconds .
2010-11-02_06-16-53PM : INFO : CLONE-21032 Archive created successfully at D:\wkd\20101102061046\archive.jar.
2010-11-02_06-16-53PM : INFO : CLONE-21006 Total time taken by cloningclient ="265" seconds .
2010-11-02_06-16-53PM : INFO : CLONE-21007 Cloning operation completed successfully.
Executing: C:\Oracle\Middleware\jdk160_14_R27.6.5-32\bin\jar.exe uf D:\wkd//20101102061046/archive.jar -C C:\oracle\Middleware\oracle_common\jlib cloningclient.jar
found WLS Home:C:\oracle\Middleware\wlserver_10.3
got C:\oracle\Middleware\wlserver_10.3
Reading properties from C:\oracle\Middleware\wlserver_10.3\.product.properties
JAVA_HOME=C:\Oracle\Middleware\jdk160_14_R27.6.5-32
MW_HOME=C\:\\Oracle\\Middleware
Java Home is installed outside of FMW Home - Agent JDK will be bound to this WLS installation
JavaExternal=true
Executing: C:\Oracle\Middleware\jdk160_14_R27.6.5-32\bin\jar.exe uf D:\wkd//20101102061046/archive.jar -C D:\wkd\20101102061046 extra.info
Cloning Successful
Cleaning up files after successful run...
unlink D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a75952aae040b40a7f161fef\createClone.pl
unlink D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a75952aae040b40a7f161fef\invoke.pl
unlink D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a75952aae040b40a7f161fef\invoke.sh
unlink D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a75952aae040b40a7f161fef\properties
unlink D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a75952aae040b40a7f161fef\provisioningUtil.pl
rmdir D:/Agent11g/agent11g/EMStage/PAF/Job_931f3d44a75952aae040b40a7f161fef
Successfully deleted all leftover files and directories.
Edited by: user13299429 on Nov 2, 2010 11:15 PM

CHeck this thread:
BINDING.JCA-12510 JCA Resource Adapter location error in SOA 11g Suite
Did you have set the correct parameters to the DBAdpater; it look lik it can not bind the parameters (BINDING JCA-12563).
Marc

How to develop and run skripts agains fusion middleware managed servers, eg. MDS

Hi!
Is it possible to write and run scripts against fusion middleware home's?
How can I change to the correct wlst in this case?
I have declared my server.
I think it should call $ORACLE_HOME/oracle_common/common/bin/wlst.sh on my server instead of an local wlst.cmd in my OEPE workspac.
Eg. I try to export MDS with wlst from one server as described in:
13 Managing the Metadata Repository (12g Release 1 (12.1.2))http://docs.oracle.com/middleware/1212/core/ASADM/repos.htm#CIHHFEAJ
If I write my script, then for the keyword exportMetadata is shown an error in the gutter:
Undefined variable: exportMetadata
If I run this I get:
Problem invoking WLST - Traceback (innermost last):
File "C:\Oracle\JDEV11~1\ORACLE~1\common\wlst\mdsWLSTCommands.py", line 237, in exportMetadata
Kind regards

Sorry, this seems to be working now. I just have to close all applications in order for the memory to call the actual BPEL process

Oracle fusion Middleware 11g -- forms issue while hitting url

Hi ,
we are facing one issue while hitting the url mentioned below
http://scrmskr.apac.nsroot.net:7801/forms/html/CRMS_KR.htm
FRM-92052:fatal error: cannot connect to the server at URL /forms/lservlet
here in the above CRMS_KR.htm we have hard-coded all the parameters value that in other case is read from formsweb.cfg
whereas if we hit the same CRMS_KR.htm renaming it to basejpi.htm and hitting below url then its opening our home page i.e our test.fmx called from this .htm file
http://scrmskr.apac.nsroot.net:7801/forms/frmservlet
We have gone through Oracle® Fusion Middleware Forms Services Deployment Guide
11g Release 1 (11.1.1)
but not able to get the issue.
Please let us know where we are going wrong or what mapping or config settings are we missing.
Config files:
CRMSKR.htm_
======================================================
<HTML>

















<HEAD><TITLE>Credit & Risk Management System</TITLE></HEAD>
<BODY bgcolor=#c0c0c0 SCROLL="no">

<OBJECT classid="clsid:CAFEEFAC-0016-0000-0012-ABCDEFFEDCBA"
codebase="http://java.sun.com/update/1.6.0/jinstall-6-windows-i586.cab#Version=1,6,0,12"
WIDTH="920"
HEIGHT="680"
HSPACE="0"
VSPACE="0"
ID="">
<SCRIPT LANGUAGE="JavaScript" SRC="/forms/frmjscript/forms_ie.js"></SCRIPT>
<PARAM NAME="TYPE" VALUE="application/x-java-applet;jpi-version=1.6.0_12">
<PARAM NAME="CODEBASE" VALUE="/forms/java">
<PARAM NAME="CODE" VALUE="oracle.forms.engine.Main" >
<PARAM NAME="ARCHIVE" VALUE="frmall.jar,crms_icons.jar" >
<PARAM NAME="serverURL" VALUE="/forms/lservlet?ifcfs=/forms/frmservlet?acceptLanguage=en-us">
<PARAM NAME="networkRetries" VALUE="50">
<PARAM NAME="serverArgs"
VALUE="escapeParams=true module=/rcrmap1/rcrrgbg2/crms/10as/fmx_dir/CRMS_LOGIN.fmx userid= debug=no host= port= obr=no record= tracegroup= log= term= ssoProxyConnect=no">
<PARAM NAME="separateFrame" VALUE="false">
<PARAM NAME="splashScreen" VALUE="">
<PARAM NAME="background" VALUE="">
<PARAM NAME="lookAndFeel" VALUE="Generic">
<PARAM NAME="colorScheme" VALUE="teal">
<PARAM NAME="serverApp" VALUE="default">
<PARAM NAME="logo" VALUE="no">
<PARAM NAME="imageBase" VALUE="CodeBase">
<PARAM NAME="formsMessageListener" VALUE="">
<PARAM NAME="recordFileName" VALUE="">
<PARAM NAME="EndUserMonitoringEnabled" VALUE="">
<PARAM NAME="EndUserMonitoringURL" VALUE="">
<PARAM NAME="heartbeat" VALUE="">
<PARAM NAME="MaxEventWait" VALUE="">
<PARAM NAME="allowAlertClipboard" VALUE="true">
<PARAM NAME="disableValidateClipboard" VALUE="false">
<PARAM NAME="enableJavascriptEvent" VALUE="true">
<PARAM NAME="MAYSCRIPT" VALUE="true">
<PARAM NAME="digitSubstitution" VALUE="context">
<PARAM NAME="legacy_lifecycle" VALUE="false">
<PARAM NAME="JavaScriptBlocksHeartBeat" VALUE="false">
<PARAM NAME="highContrast" VALUE="false">
<PARAM NAME="disableMDIScrollbars" VALUE="">
<PARAM NAME="clientDPI" VALUE="">
<PARAM name="applet_stop_timeout" value="800">
<COMMENT>
<EMBED SRC="" PLUGINSPAGE="http://java.sun.com/products/archive/j2se/6u12/index.html"
TYPE="application/x-java-applet;jpi-version=1.6.0_12"
java_codebase="/forms/java"
java_code="oracle.forms.engine.Main"
java_archive="frmall.jar,crms_icons.jar"
WIDTH="920"
HEIGHT="680"
HSPACE="0"
VSPACE="0"
NAME=""
serverURL="/forms/lservlet?ifcfs=/forms/frmservlet"
networkRetries="0"
serverArgs="escapeParams=true module=/rcrmap1/rcrrgbg2/crms/10as/fmx_dir/CRMS_LOGIN.fmx userid= debug=no host= port= obr=no record= tracegroup= log= term= ssoProxyConnect=no"
separateFrame="false"
splashScreen=""
background=""
lookAndFeel="Generic"
colorScheme="teal"
serverApp="default"
logo="no"
imageBase="CodeBase"
recordFileName=""
EndUserMonitoringEnabled=""
EndUserMonitoringURL=""
heartBeat=""
MaxEventWait=""
disableValidateClipboard="false"
allowAlertClipboard="true"
enableJavascriptEvent="true"
MAYSCRIPT="true"
digitSubstitution="context"
legacy_lifecycle="false"
JavaScriptBlocksHeartBeat="false"
highContrast="false"
disableMDIScrollbars=""
clientDPI=""
applet_stop_timeout="800"
>
<NOEMBED>
</COMMENT>
</NOEMBED></EMBED>
</OBJECT>

<table border="0" width="1005" height="30" >
<tr>
<td width="74%" height="30" align="left"><img border="0" src="/rcrms/icons/f_cblogo.gif" width="65px" height="20px"><br>
<font face="Garamond" size="1" >www.citigroup.net</font>
</td>
<td width="26%" height="30" align ="left" ><font face="Garamond" size="1.5">
Terms,conditions, caveats and small print.<br>
Copyright © 2003 Citigroup. All rights reserved. Unpublished.</font>
</td>
</tr>
</table>
</BODY>
</HTML>
======================================================
forms.conf
====================================================
# Name
# forms.conf - Forms component Apache directives configuration file.
# Purpose
# It should include the weblogic managed server (routing) directives for
# the servers where Forms applications are deployed and other miscellaneous
# Forms component OHS directives.
# Remarks
# This file is included with the OHS configuration under
# $OI/config/OHS/<OHS Node Name>/moduleconf sub-directory.
# virtual mapping for the /forms/html mapping.
RewriteEngine on
RewriteRule ^/forms/html/(..*) /workaroundhtml/$1 [PT]
RewriteRule ^/rcrms/html/(..*) /workaroundhtml/$1 [PT]
AliasMatch ^/workaroundhtml/(..*) "/rcrmap2/weblogic/bea/rcrms/config/FormsComponent/forms/html/$1"
AliasMatch ^/rcrms/icons/(..*) "/rcrmap2/weblogic/bea/ORA_PFRD/forms/java/$1"
# Virtual path mapping for Forms Java jar and class files (codebase)
AliasMatch ^/forms/java/(..*) "/rcrmap2/weblogic/bea/ORA_PFRD/forms/java/$1"
# Virtual path mapping for testcrms (codebase)
AliasMatch ^/rcrms/java/(..*) "/rcrmap2/weblogic/bea/ORA_PFRD/forms/java/$1"
<Location /forms>
SetHandler weblogic-handler
WebLogicHost kauh0079
WebLogicPort 8001
</Location>
====================================================
Thanks,
Harish

Hi Michael,
Thanks for your valuable inputs.
Below line in CRMS_KR.htm was causing the problem because while directly hitting the CRMS_KR.htm we had hard-coded all the tag values which in other case is read from formweb.cfg
Before:
*<PARAM NAME="serverURL" VALUE="/forms/lservlet?ifcfs=/forms/frmservlet?acceptLanguage=en-us">*
We modified it to
After:
*<PARAM NAME="serverURL" VALUE="/forms/lservlet">*
Now we are able to hit the below URL sucessfully
http://scrmskr.apac.nsroot.net:7801/forms/html/CRMS_KR.htm
Thanks & Regards,
Harish

Oracle 11g Fusion Middleware (11.1.1.3.0) Report Configuration Issue

Oracle 11g Fusion Middleware (11.1.1.3.0) Report Configuration Issue
=============================================
Hi All,
I have installed Oracle 11g Fusion Middleware (11.1.1.3.0) on Oracle Linux 5 and getting some issues while configuring. What's happening is that when I run my report, it looks for the library attached to it. If I define the REPORTS_PATH in reports.sh, it works fine.
What I want to achieve is to push reports to use REPORTS_PATH environment variable from rwserver.conf instead of reports.sh
Someone told me to remove the REPORTS_PATH from reports.sh and add the REPORTS_PATH from reports.sh to a default.env in rwserver.conf, but it didn't worked.
What I know about the report server stuff in 11g Fusion Middleware is that it consists of two different servers (Standalone and In Process). Our application runs report using SRW.RUN_REPORT which basically use In Process report server setting in rwserver.conf to run the report.
The heirarchy in which reports try to look for the REPORTS_PATH is
1) REPORTS.sh
2) rwserver.conf
3) Settings as per Oracle Enterprise Manager Configuration Settings.
My standalone report server name is ReportsServer_hostname_asinst_F and the In Process Server name is rep_wls_reports_hostname_asinst_frd. When I define rep_wls_reports_hostname_asinst_frd (In process Report Server Name) for the server name parameter, I do not get any results for the report run using srw.run_report. Also I can't see the reason behind the report executed because of the following issue
http://hostname:8888/reports/rwservlet/showjobs?server=rep_wls_reports_hostname_asinst_frd
REP-51019: System user authentication is missing.
** the Singlesignon in rwservlet.properties is defined as no
But when I define ReportsServer_hostname_asinst_F (Standalone Report Server Name) as server parameter and ran the report using srw.run_report, I get result with the REPORTS_PATH defined in reports.sh not using rwserver.conf file.
http://hostname:8888/reports/rwservlet/showjobs?server=ReportsServer_hostname_asinst_F
(which shows the report just run).
Can someone who did Report Server configuration using ENV files (changing rwserver.conf), pls. send me the screenshots. Want to make sure if I am changing the correct files under correct location.
Pls. feel free to ask me questions related to the environment set up.
Thanks

Your question belongs in {forum:id=84}
John

Fusion Middleware Enterprise Manager Startup Issue!!

Hi,
I am facing issue with em startup..I have installed the fusion Middleware(UCM11g) in Windows Server 2003..I have tried to login into EM using
http://IP-Address:7001/em...But it is throwing the follwoing error:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
Please find the log trace below..
<AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <1322655505312> <BEA-101371> <There was a failure when processing annotations for application D:\Oracle\Middleware\user_projects\domains\ucm_domain\servers\AdminServer\tmp\_WL_user\em\hsz5x1\em\em.war. Please make sure that the annotations are valid. The error is oracle.adf.share.security.authentication.AuthenticationServlet>
<BEA-149205> <Failed to initialize the application 'em' due to error weblogic.application.ModuleException: Failed to load webapp: 'em/em'.
weblogic.application.ModuleException: Failed to load webapp: 'em/em'..
<Module em/em of application em is transitioning from STATE_NEW to STATE_PREPARED on server AdminServer.>
There was a failure when processing annotations for application D:\Oracle\Middleware\user_projects\domains\ucm_domain\servers\AdminServer\tmp\_WL_user\em\hsz5x1\em\em.war. Please make sure that the annotations are valid. The error is oracle.adf.share.security.authentication.AuthenticationServlet>
Caused By: java.lang.ClassNotFoundException: oracle.adf.share.security.authentication.AuthenticationServlet
Can you please tell me how to fix this issue?

I have cleared the tmp Folder under the Admin Server Directory and restarted the server..but still facing the same error..How to resolve the error *"oracle.adf.share.security.authentication.AuthenticationServlet"*

Weblogic- Fusion Middleware 11g domain JPS security issue.

Hello All,
I'm not very familar with the extensive Security "JPS" managembnt inside weblogic including fusion middleware and the domain security policy.
I just wanted to remove the below line from my "Reports Engine" configuration and now I'm stuck with the further below error constantly.
As far as I can tell the Domain security provide is configure to OID (which I don't even use). All teh files .sso, system_jazn... are all available and have never been deleted or changed.
Fusion Report Engine config (want to remove the security )
=======================================
<engine minEngine="3" maxIdle="30" maxEngine="8" id="rwEng" engLife="50" defaultEnvId="GICQA" class="oracle.reports.engine.EngineImpl"/>
    
    JPS security errors
============
[2012-08-20T13:49:57.567-04:00] [reports] [TRACE:32] [REP-56025] [oracle.reports.server] [tid: 10] [ecid: 0000J_59wD2Fc5WFLzINOA1GCbZ5000001,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] RWServer:startServer Reports Server is starting up.
[2012-08-20T13:49:58.098-04:00] [reports] [WARNING] [] [oracle.reports.server] [tid: 10] [ecid: 0000J_59wD2Fc5WFLzINOA1GCbZ5000001,0] Multicast:init java.net.SocketException: Unrecognized Windows Sockets error: 0: no Inet4Address associated with interface
[2012-08-20T13:49:58.098-04:00] [reports] [WARNING] [] [oracle.reports.server] [tid: 10] [ecid: 0000J_59wD2Fc5WFLzINOA1GCbZ5000001,0] Multicast:init java.net.SocketException: Unrecognized Windows Sockets error: 0: no Inet4Address associated with interface
[2012-08-20T13:49:58.113-04:00] [reports] [NOTIFICATION:16] [REP-65000] [oracle.reports.server] [tid: 10] [ecid: 0000J_59wD2Fc5WFLzINOA1GCbZ5000001,0] Multicast:init Communication channel is initialized.
[2012-08-20T13:49:58.113-04:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 10] [ecid: 0000J_59wD2Fc5WFLzINOA1GCbZ5000001,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] Multicast:registerReceiver Packet handler registered
[2012-08-20T13:49:58.113-04:00] [reports] [NOTIFICATION:16] [] [oracle.reports.server] [tid: 10] [ecid: 0000J_59wD2Fc5WFLzINOA1GCbZ5000001,0] ServerPacketHandler:start ServerPacketHandler started successfully
[2012-08-20T13:50:00.219-04:00] [reports] [NOTIFICATION:16] [] [oracle.reports.server] [tid: 10] [ecid: 0000J_59wD2Fc5WFLzINOA1GCbZ5000001,0] SecurityHelper:start Security system rwJaznSec successfully started.
[2012-08-20T13:50:00.531-04:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 10] [ecid: 0000J_59wD2Fc5WFLzINOA1GCbZ5000001,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] ReportsCacheHandler:init JOC is initialized
[2012-08-20T13:50:00.578-04:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 10] [ecid: 0000J_59wD2Fc5WFLzINOA1GCbZ5000001,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] JobManager:start Job id sequence = null
[2012-08-20T13:50:00.594-04:00] [reports] [NOTIFICATION] [] [oracle.reports.server] [tid: 10] [ecid: 0000J_59wD2Fc5WFLzINOA1GCbZ5000001,0] Failed initializing JPS D:\Oracle\Middleware\asinst_1\config\ReportsServerComponent\RptSvr_GICPHXAP11_asinst_1\rwserver.conforacle.security.jps.service.credstore.CredStoreException: Could not find the key specified
[2012-08-20T13:50:00.594-04:00] [reports] [INCIDENT_ERROR] [REP-50125] [oracle.reports.server] [tid: 10] [ecid: 0000J_59wD2Fc5WFLzINOA1GCbZ5000001,0] REP-50125 : An internal exception occurred: oracle.security.jps.service.credstore.CredStoreException: Could not find the key specified. [[
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
     at oracle.reports.utility.Utility.newRWException(Utility.java:1053)
     at oracle.reports.utility.Utility.newRWException(Utility.java:1066)
     at oracle.reports.server.ServerConfig.getValueFromCSF(ServerConfig.java:1354)
     at oracle.reports.server.ServerConfig.getElementProperties(ServerConfig.java:1294)
     at oracle.reports.server.ServerConfig.getElementProperties(ServerConfig.java:1038)
     at oracle.reports.server.JobStoreDB.start(JobStoreDB.java:77)
     at oracle.reports.server.RWServer.startServer(RWServer.java:1038)
     at oracle.reports.server.RWServer.jniMain(RWServer.java:305)
]]Can anybody assist.
Thanks in advance
Jan S.

Hello Kalyan,
I looked at the bug you mentioned and this seem to be related to JSP files as opposed to JPS security. I've searche metalink and may have found some similar and possibly the exact error.
*Error PKI-02002: Unable to open the wallet. Check password When Starting a Reports Server [ID 1316651.1]*
Thanks
Jan S.

Report Builder is not exist in fusion middleware forms&reports installation

Dear All,
i have installed oracle fusion middleware forms & report services ofm_frmrpts_win_11.1.2.1.0_64_disk1_1of1.
form builder is there, but the report builder is not there? why? where is report builder?
Regards.

Hi Maahjoor,
Try Starting Report Builder using the rwbuilder.bat found in the %ORACLE_INSTANCE%\config\reports\bin\ directory.
If you still getting issues
a)Backup the %ORACLE_INSTANCE%\config\reports\bin\ rwbuilder.bat file
b)Now modify rwbuilder.bat file from the %ORACLE_HOME%\bin\rwbuilder.bat file,by manually hard-coding the correct paths for:
$$Instance.directory$$\config\reports\bin\reports.bat
$$Instance.oracle_home$$\bin\rwbuilder.exeThat is, if your instance home is C:\Oracle\Middleware\as_inst1, then change the rwbuilder.bat to reflect:
C:\Oracle\Middleware\as_inst1\config\reports\bin\reports.bat
C:\Oracle\Middleware\as_inst1\bin\rwbuilder.exe
c)Then, re-execute the modified rwbuilder.bat file from the %ORACLE_INSTANCE%\config\reports\bin\ .
If it still doesnt work...
Follow these 2 metalink ID's ,They will be helpful
*REP-50125 "rwbuilder.conf:java.lang.NullPointerException" Trying To Open Reports Builder[Article ID 1532120.1]*
*Report Builder 11g on MS Windows Errors with: REP-50125[Article ID 1059638.1]*
Regards
Fabian

Interoperability of Fusion Middleware Products.

Hi all,
I have following scenario where I am looking for some good suggestions.
I have a cluster of 4 weblogic servers 10.3.5 where need to install Oracle Identity Manager 11.1.2 (11gR2) along with OBIEE 11.1.1.6 (11gR1) under the same Middleware Home.
Following are the points to be considered for this installation.
1- As per the documentation provided by oracle for interoperability
http://docs.oracle.com/cd/E27559_01/doc.1112/e29569/interop_11g.htm#BCEJEFAF
Section 3.3.1, “When installing Oracle Fusion Middleware products, be sure that each Middleware home you create contains only products that are at the same version or patch set.”
The reason is given as *“Each product has its own maintenance schedule and it is possible that future interoperability issues could result.”*
Further in section 3.4.2 it is mentioned *“When you configure a domain, ensure that all products configured within the domain are at the same patch set.* For example, do not configure Oracle Identity and Access Management 11g Release 1 (11.1.1.5.0) in the same domain with Oracle SOA Suite 11g Release 1 (11.1.1.6.0).”
2- Since SOA is still having version 11.1.1.6.0(11gR1) and is required for the IDM it is mentioned that “One exception to this rule is the installation of Oracle SOA Suite 11g Release 1 (11.1.1.6.0) in the same Middleware home as Oracle Identity Manager 11g Release 2 (11.1.2). Oracle Identity Manager is one of the Oracle Identity and Access Management products. It requires Oracle SOA Suite.”
3- Please also see section 3.4.3 of the same document, that stats ”Oracle often releases Oracle Identity Management and Oracle Identity and Access Management products on a schedule different from the schedule for the other Oracle Fusion Middleware products. As a result, it is common to use a different release or patch set of an Oracle Identity Management or Oracle Identity and Access Management product with your Oracle Fusion Middleware products, as long as they are not configured within the same domain. For example, you can use Oracle Identity and Access Management 11g Release 1 (11.1.1.5.0) products with your Oracle SOA Suite 11g Release 1 (11.1.1.6.0) products, if they are in separate domains.In these scenarios, the Oracle Identity and Access Management products are typically installed on a separate host and in a separate Middleware home.”
4- OBIEE 11.1.1.6.0 also requires components from the SOA 11.1.1.6.0 e.g OWSM Policy Manager.
Now, for the time being as per the document it is possible for me to install OBIEE 11.1.1.6.0 (11gR1), SOA 11.1.1.6.0(11gR1) and IDM 11.1.2(11gR2) under the same middleware home having separate domains , the issue is how to avoid the compatibility issues in future since the OBIEE, SOA and IDM are having independent upgrade cycle and patch release schedule. If any patch / upgrade is released and required to be installed for any of the above products it might put the remaining products in incompatible state hence rendering them dysfunctional?

Will the 521 APs work with the 2112 controller?
No.
Are there any cheaper APs than the 1140AG that will work with the 2112 controller?
You could try the 1130. 1140 supports 802.11n while 1130 is a/b/g only.
Is the 1240AG a good choice for a non-climate controlled warehouse environment?
The 1240, like the 1130, supports a/b/g only while the 1250 supports a/b/g/n. The newer 1260 is controller-based only. The 1240, 1250 and 1260 use external antennae that's an OPTION.

Fusion Middleware Installation on RHEL 4.8 (64Bit)

Hi All,
I have a 64 Bit server which has E-Business Suite R12 (64Bit) and database 11g R2 (64Bit).
I know it is not recommended to install Fusion Middleware onto the same server as E-Business Suite due to performance issues. But, since I am limited to this single 64Bit server:
Can I do the following?
Create a separate 11gR2 db on a separate OracleHome, install Weblogic Server, and SSO, Portal, and Discoverer (FSM 11g) into FSM home. Would this run? I know I would need to watch for possible port conflicts and change them as necessary.
Thanks,
Sinan

Provided that you have enough resources like RAM, diskspace, CPUs etc.
why database on separate OracleHome?
You can use the existing Oracle Home if you want to create a new 11g DB.

Is cluster in fusion middleware for reports level

Hi All,
our company will do implantation for fusion middleware (forms & reports).
we set with consultant to design the proper structure, design contain one load balancer and 2 servers, and one server in duster recovery.
during explanation, he told us will be a cluster between reports in tow servers to reduce the hits.
I can not able to understand this point, and if this correct ,
why there is a cluster between forms in tow servers as well?
could you please advice in this matter.
thanks,
Ahmed.

Hi Maahjoor,
Try Starting Report Builder using the rwbuilder.bat found in the %ORACLE_INSTANCE%\config\reports\bin\ directory.
If you still getting issues
a)Backup the %ORACLE_INSTANCE%\config\reports\bin\ rwbuilder.bat file
b)Now modify rwbuilder.bat file from the %ORACLE_HOME%\bin\rwbuilder.bat file,by manually hard-coding the correct paths for:
$$Instance.directory$$\config\reports\bin\reports.bat
$$Instance.oracle_home$$\bin\rwbuilder.exeThat is, if your instance home is C:\Oracle\Middleware\as_inst1, then change the rwbuilder.bat to reflect:
C:\Oracle\Middleware\as_inst1\config\reports\bin\reports.bat
C:\Oracle\Middleware\as_inst1\bin\rwbuilder.exe
c)Then, re-execute the modified rwbuilder.bat file from the %ORACLE_INSTANCE%\config\reports\bin\ .
If it still doesnt work...
Follow these 2 metalink ID's ,They will be helpful
*REP-50125 "rwbuilder.conf:java.lang.NullPointerException" Trying To Open Reports Builder[Article ID 1532120.1]*
*Report Builder 11g on MS Windows Errors with: REP-50125[Article ID 1059638.1]*
Regards
Fabian

All components of fusion middleware in one domain - is this better approach

Pls advise, is this better approach to have all the components of Fusion Middleware (SOA, B2B, BPM, WebCenter, Content server) in one domain itself in cluster environment for production. If not, pls advise the better architecture for production environment..
Regards,
Suneel Jakka

Suneel,
It's a good idea to use split domain approach (multiple domains in one MW Home) for large enterprise deployments as it makes maintenance very easy. Lot of customers have been using this approach and they are quite happy about it. Following benefits you get while using split domain approach -
1. Patching becomes flexible where patching of one component will not affect other
2. System downtime will decrease as because of issue with one component, only one domain will be affected
3. Reduced risk of incompatibility or classpath issues which arise because of different components (jars and third party utilities) being used in each product
4. Modular integration and more layers of security
If you are using all SOA, B2B, BPM, WebCenter, Content server and they have significant load then better have below domains -
1. Dedicated domain for B2B (as it is a gateway product and will be having communication over internet)
2. Shared domain for BPM and SOA (if load is high on both then better have separate domain for each)
3. Shared domain for WebCenter & Content server (if load is high on both then better have separate domain for each)
I also recommend to install Webcenter and SOA products in separate middleware home itself so that you may also upgrade them independently.
Regards,
Anuj

Error: Specified WebLogic home is not associated with given Middleware home

Hi All,
I am getting an error -"INST-07250: Specified WebLogic home is not associated with the given Middleware home" while configuring "bi domain".
My requirement is to first install a domain in one host and then copy the installation to a different host so that domain can be configured in the new host.
To make it run on the new host, I have modified the path of fusion home directory and host info in all the required files. But when I run the below script which configures "bi domain" and does silent installation, I get the above INST-07250 error.
The paths of MW_HOME, WEBLOGIC_HOME, ORACLE_HOME and INSTALLER_DIR etc are as per the new host and correct.
Script:
$INSTALLER_DIR/runInstaller ORACLE_HOME="$ORACLE_HOME" -invPtrLoc $ORACLE_HOME/oraInst.loc -oneclick $COMMANDLINE -Doracle.config.mode=true
The variables are:
INSTALLER_DIR= /net/adc6260266/scratch/kumasaur/prov/apphome/fusionapps/bi/bin/../oui/bin
ORACLE_HOME= /net/adc6260266/scratch/kumasaur/prov/apphome/fusionapps/bi
COMMANDLINE= -weblogicConfigSilent -silent -waitForCompletion -responseFile /tmp/bi-facade-temp-dir505387909/configuration.rsp -jreLoc /scratch/kumasaur/prov/repos64ST3B17A/jdk6
and the configuration.rsp file contents are:
[ENGINE]
#DO NOT CHANGE THIS.
Response File Version=1.0.0.0.0
[GENERIC]
UNIX_GROUP_NAME=dba
#Set this to true if you want to create a new domain, all other required variables need to be provided. If this is set to true then variables "SCALEOUT_BISYSTEM" must be set to false, since the variables are mutually exclusive.
CREATE_BISYSTEM=true
#Set this to true if you want to extend an already existing domain, all other required variables need to be provided. If this is set to true then variables "CREATE_BISYSTEM" must be set to false, since the variables are mutually exclusive.
SCALEOUT_BISYSTEM=false
#Write the name of the domain you want to create. Domain name may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters.
DOMAIN_NAME=BIDomain
#Write the name of the host to which you want to connect. It should have an already existing domain configured.
DOMAIN_HOSTNAME=adc6260266.us.oracle.com
#Give the port number at which the host should be connected.
DOMAIN_PORT=
#Give an administrator user name for the domain if you are creating a new one otherwise give the administrator user name for the domain configured at the host.
ADMIN_USER_NAME=FUSION_APPS_PROV_PATCH_APPID
#Give an administrator password for the domain if you are creating a new one otherwise give the administrator password for the domain configured at the host.
ADMIN_PASSWORD=Bcu#favw2goh1m
#Write the administrator password again to confirm.
ADMIN_CONFIRM_PASSWORD=Bcu#favw2goh1m
#Give the complete path to a valid Middleware Home.
MW_HOME=/net/adc6260266/scratch/kumasaur/prov/apphome/fusionapps
#Give the complete path to a valid WebLogic Server Home.
WEBLOGIC_HOME=/net/adc6260266/scratch/kumasaur/prov/apphome/fusionapps/wlserver_10.3
#Give the complete path for an Oracle Instance directory to be created. This is the location where the software configuration files and runtime processes will reside.
INSTANCE_HOME=/net/adc6260266/scratch/kumasaur/prov/apphome/instance/BIInstance
#Give a name for Oracle Instance corresponding to the Instance Home. The Oracle Instance name may only contain alphanumeric and underscore (_) characters, it must begin with an alphabetic (a-z or A-Z) character, and must be from 4 to 30 characters in length.
INSTANCE_NAME=BIInstance
#Give the complete path for a domain home to be created.
DOMAIN_HOME_PATH=/net/adc6260266/scratch/kumasaur/prov/apphome/instance/domains/adc6260266.us.oracle.com/BIDomain
#Format: hostname:port:servicename. For Application Cluster Database: host1:port1^host2:port2@servicename
DATABASE_CONNECTION_STRING_BI=ap6055fems.us.oracle.com:1528:fadb04
#Enter the BIPLATFORM schema username.
DATABASE_SCHEMA_USER_NAME_BI=BIKUMASAUR_BIPLATFORM
#Enter the BIPLATFORM schema password.
DATABASE_SCHEMA_PASSWORD_BI=<SECURE VALUE>
#Select the database type in which the BIPLATFORM schema exists. Supported database types are Oracle Database, Microsoft SQL Server, IBM DB2.
DATABASE_TYPE_BI=Oracle Database
#Format: hostname:port:servicename. For Application Cluster Database: host1:port1^host2:port2@servicename
DATABASE_CONNECTION_STRING_MDS=ap6055fems.us.oracle.com:1528:fadb04
#Enter the MDS schema username.
DATABASE_SCHEMA_USER_NAME_MDS=FUSION_MDS
#Enter the MDS schema password.
DATABASE_SCHEMA_PASSWORD_MDS=<SECURE VALUE>
#Select the database type in which the BIPLATFORM schema exists. Supported database types are Oracle Database, Microsoft SQL Server, IBM DB2.
DATABASE_TYPE_MDS=Oracle Database
AUTOMATIC_PORT_DETECT=false
#Specify the full path to the staticports.ini file that lists the ports to use.
STATICPORT INI FILE LOCATION=/scratch/kumasaur/prov/apphome/ports/bi_staticports.ini
#Provide the My Oracle Support Username. If you wish to ignore Oracle Configuration Manager configuration provide empty string for user name.
MYORACLESUPPORT_USERNAME=
#Provide the My Oracle Support Password
MYORACLESUPPORT_PASSWORD=<SECURE VALUE>
#Set this to true if you wish to decline the security updates. Setting this to true and providing empty string for My Oracle Support username will ignore the Oracle Configuration Manager configuration
DECLINE_SECURITY_UPDATES=true
#Set this to true if My Oracle Support Password is specified
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
#Provide the Proxy Host
PROXY_HOST=
#Provide the Proxy Port
PROXY_PORT=
#Provide the Proxy Username
PROXY_USER=
#Provide the Proxy Password
PROXY_PWD=<SECURE VALUE>
#Provide the Password to encrypt the RPD
RPD_ENCRYPTION_PASSWORD=<SECURE VALUE>
#Confirm the RPD password
RPD_CONFIRM_PASSWORD=<SECURE VALUE>
[SYSTEM]
[APPLICATIONS]
#Set to true to configure Oracle Business Intelligence. Otherwise set to false.
CONFIGURE_BI=true
[RELATIONSHIPS]
Any help to resolve this would be greatly appreciated.
Thanks,
Saurabh

Hi All,
I am getting an error -"INST-07250: Specified WebLogic home is not associated with the given Middleware home" while configuring "bi domain".
My requirement is to first install a domain in one host and then copy the installation to a different host so that domain can be configured in the new host.
To make it run on the new host, I have modified the path of fusion home directory and host info in all the required files. But when I run the below script which configures "bi domain" and does silent installation, I get the above INST-07250 error.
The paths of MW_HOME, WEBLOGIC_HOME, ORACLE_HOME and INSTALLER_DIR etc are as per the new host and correct.
Script:
$INSTALLER_DIR/runInstaller ORACLE_HOME="$ORACLE_HOME" -invPtrLoc $ORACLE_HOME/oraInst.loc -oneclick $COMMANDLINE -Doracle.config.mode=true
The variables are:
INSTALLER_DIR= /net/adc6260266/scratch/kumasaur/prov/apphome/fusionapps/bi/bin/../oui/bin
ORACLE_HOME= /net/adc6260266/scratch/kumasaur/prov/apphome/fusionapps/bi
COMMANDLINE= -weblogicConfigSilent -silent -waitForCompletion -responseFile /tmp/bi-facade-temp-dir505387909/configuration.rsp -jreLoc /scratch/kumasaur/prov/repos64ST3B17A/jdk6
and the configuration.rsp file contents are:
[ENGINE]
#DO NOT CHANGE THIS.
Response File Version=1.0.0.0.0
[GENERIC]
UNIX_GROUP_NAME=dba
#Set this to true if you want to create a new domain, all other required variables need to be provided. If this is set to true then variables "SCALEOUT_BISYSTEM" must be set to false, since the variables are mutually exclusive.
CREATE_BISYSTEM=true
#Set this to true if you want to extend an already existing domain, all other required variables need to be provided. If this is set to true then variables "CREATE_BISYSTEM" must be set to false, since the variables are mutually exclusive.
SCALEOUT_BISYSTEM=false
#Write the name of the domain you want to create. Domain name may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters.
DOMAIN_NAME=BIDomain
#Write the name of the host to which you want to connect. It should have an already existing domain configured.
DOMAIN_HOSTNAME=adc6260266.us.oracle.com
#Give the port number at which the host should be connected.
DOMAIN_PORT=
#Give an administrator user name for the domain if you are creating a new one otherwise give the administrator user name for the domain configured at the host.
ADMIN_USER_NAME=FUSION_APPS_PROV_PATCH_APPID
#Give an administrator password for the domain if you are creating a new one otherwise give the administrator password for the domain configured at the host.
ADMIN_PASSWORD=Bcu#favw2goh1m
#Write the administrator password again to confirm.
ADMIN_CONFIRM_PASSWORD=Bcu#favw2goh1m
#Give the complete path to a valid Middleware Home.
MW_HOME=/net/adc6260266/scratch/kumasaur/prov/apphome/fusionapps
#Give the complete path to a valid WebLogic Server Home.
WEBLOGIC_HOME=/net/adc6260266/scratch/kumasaur/prov/apphome/fusionapps/wlserver_10.3
#Give the complete path for an Oracle Instance directory to be created. This is the location where the software configuration files and runtime processes will reside.
INSTANCE_HOME=/net/adc6260266/scratch/kumasaur/prov/apphome/instance/BIInstance
#Give a name for Oracle Instance corresponding to the Instance Home. The Oracle Instance name may only contain alphanumeric and underscore (_) characters, it must begin with an alphabetic (a-z or A-Z) character, and must be from 4 to 30 characters in length.
INSTANCE_NAME=BIInstance
#Give the complete path for a domain home to be created.
DOMAIN_HOME_PATH=/net/adc6260266/scratch/kumasaur/prov/apphome/instance/domains/adc6260266.us.oracle.com/BIDomain
#Format: hostname:port:servicename. For Application Cluster Database: host1:port1^host2:port2@servicename
DATABASE_CONNECTION_STRING_BI=ap6055fems.us.oracle.com:1528:fadb04
#Enter the BIPLATFORM schema username.
DATABASE_SCHEMA_USER_NAME_BI=BIKUMASAUR_BIPLATFORM
#Enter the BIPLATFORM schema password.
DATABASE_SCHEMA_PASSWORD_BI=<SECURE VALUE>
#Select the database type in which the BIPLATFORM schema exists. Supported database types are Oracle Database, Microsoft SQL Server, IBM DB2.
DATABASE_TYPE_BI=Oracle Database
#Format: hostname:port:servicename. For Application Cluster Database: host1:port1^host2:port2@servicename
DATABASE_CONNECTION_STRING_MDS=ap6055fems.us.oracle.com:1528:fadb04
#Enter the MDS schema username.
DATABASE_SCHEMA_USER_NAME_MDS=FUSION_MDS
#Enter the MDS schema password.
DATABASE_SCHEMA_PASSWORD_MDS=<SECURE VALUE>
#Select the database type in which the BIPLATFORM schema exists. Supported database types are Oracle Database, Microsoft SQL Server, IBM DB2.
DATABASE_TYPE_MDS=Oracle Database
AUTOMATIC_PORT_DETECT=false
#Specify the full path to the staticports.ini file that lists the ports to use.
STATICPORT INI FILE LOCATION=/scratch/kumasaur/prov/apphome/ports/bi_staticports.ini
#Provide the My Oracle Support Username. If you wish to ignore Oracle Configuration Manager configuration provide empty string for user name.
MYORACLESUPPORT_USERNAME=
#Provide the My Oracle Support Password
MYORACLESUPPORT_PASSWORD=<SECURE VALUE>
#Set this to true if you wish to decline the security updates. Setting this to true and providing empty string for My Oracle Support username will ignore the Oracle Configuration Manager configuration
DECLINE_SECURITY_UPDATES=true
#Set this to true if My Oracle Support Password is specified
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
#Provide the Proxy Host
PROXY_HOST=
#Provide the Proxy Port
PROXY_PORT=
#Provide the Proxy Username
PROXY_USER=
#Provide the Proxy Password
PROXY_PWD=<SECURE VALUE>
#Provide the Password to encrypt the RPD
RPD_ENCRYPTION_PASSWORD=<SECURE VALUE>
#Confirm the RPD password
RPD_CONFIRM_PASSWORD=<SECURE VALUE>
[SYSTEM]
[APPLICATIONS]
#Set to true to configure Oracle Business Intelligence. Otherwise set to false.
CONFIGURE_BI=true
[RELATIONSHIPS]
Any help to resolve this would be greatly appreciated.
Thanks,
Saurabh

Oracle Fusion Middleware 11G B2B Document Type not getting Identified

Hello,
I have installed Oracle Fusion Middleware 11g on my local machine and created a custom document type with proper .xsd definition and XPath Expression Identifier in Oracle B2B interface and configured its trading partners ( Host & Remote ) along with an agreement between the partners.
I have also configured the host listening channel of Generic-File type which picks xml files from my c:\orclsrvs_in folder.
My problem is that the moment I drop any sample file in the expected directory, it gets picked up from B2B , but there isn't any record of the same under Reports and Metrics links.
The Business message, Application message and Conversation message tabs are also not showing any information about the record picked, but in wire message tab, the record is shown in PROCESSING state.
I am not able to conclude whats wrong behind this.. where can i track the logs for the same ??
kindly help to resolve this issue.
Thanks & Regards
Hiteshkumar Chaudhary

Hi Hitesh,
i came to know that B2B extracts the TP name from the filename itselfYes, in case of Generic File, Generic SFTP and Generic FTP, file name provides the necessary values to Oracle B2B to identify the Trading Partner. You can define your own file name format in the Delivery Channel under Transport Protocol Parameters in field "Filename format" (It's an optional field but it is always good to define your own format, otherwise B2B will take it's default format - TradingPartner_DocumentType_Revision_msgType_msgId_replytoMsgID_extension.xml ). Following Filename formats can be used -
%FROM_PARTY%
%TO_PARTY%
%DOCTYPE_NAME%
%DOCTYPE_REVISION%
%MSG_ID%
%TIMESTAMP%
These file name formats can be used in any combination; for example,
%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%.dat
Note - Any file extension is allowed.
what are the system parameters to be set in weblogic console and how?? This activity is part of the pre and post installation steps. If you have done those without getting any errors then nothing else is required.
how shall I reinstall XEngine properly ??XEngine is part of B2B installation. If B2B gets installed without flashing any errors then we assume that other components of this part has installed properly.
Regards,
Anuj
Edited by: Anuj Dwivedi, Infosys on Aug 28, 2009 5:51 PM

Opatch Issue (Fusion Middleware Home is Corrupted)

Similar Messages

Maybe you are looking for