OPC failed

i have some 4x dvd-r media lying around, and needed to burn a dvd...i tried the 'auto' writing speed option in k3b and it says "opc failed please try writing speed 1x"...so anyway it burns properly at 1x at 2x....but i dont see a 4x option available...please help!

update: by clicking the tiny refresh icon i managed to get k3b to display 4x as an option...but when i actually choose 4x, i get the same OPC error...i presume OPC is optimum power calibration...

Similar Messages

Dsc opc shared variables yields Server Failure

I've been struggling with the transition from DSC 7.1 to 8+ ever since the release of version 8. I use the Allen Bradley OPC server supplied with the DSC module (Industrial Automation OPC Servers v 5.1) to communicate with a PLC 5/30 via Ethernet, or at least I did when I was using 7.1.
Prior to today I always failed to get the shared variables that were bound to addresses in the OPC server to deploy, usually getting an error number that started with -19. However today I finally got it to deploy by keeping the I/O server and the shared variables in separate libraries within my project. Now that they deploy I find that I am unable to monitor them. I keep getting a Server Failure. I have browsed the forums here heavily, and the documentation all relates to remote OPC, which is not what I'm doing here (OPC client and server are on the same machine). I tried changing the login account for the Variable Engine service anyway, but that doesn't help, so I put it back.
I have had some luck simply binding my front panel objects to the OPC server addresses using Datasockets, so it appears that my OPC server is working. However, Datasockets is not a viable option for me because there are times when my project needs to write to a large number of addresses in the PLC sequentially, which never works over datasockets (in my experience).
We have continued to work in version 7.1 because of the challenges of moving to 8+, but since we can no longer purchase DSC runtime licenses for version 7.1 in order to deploy, it seems that we MUST move forward to 8+ or abandon LabVIEW altogether (which is certainly an option).
For clarification, I am now working with version 8.2 (but I've been fighting with it since 8.0 without much success). If anybody out there can think of a critical step that I might have missed that might cause this, or if there is a known solution, I could really use (and would greatly appreciate) the help. Thanks!

Nobody out there seems to have any answers for this, so I kept pounding on it (and pulling my hair out). In the end I finally succeeded in getting one of my old 7.1 DSC projects to run on 8.2. Here's what I did:
1. I begin with a fresh installation of Windows. I tested it with both 2000 and XP Pro. Vista RC1 will absolutely NOT work!
2. Install LabVIEW 8.2, DSC 8.2, and just the OPC server that I need from the IA OPC CD (in my case the Allen Bradley server)
3. Open the IA OPC server editor, and create a new file with an object in it for my PLC (PLC 5/30, Ethernet in my case)
4. Save, set it as the startup file
5. Run LabVIEW, create an empty project
6. Add an IO server
7. Launch Multi Variable Editor, load project file created in step 6, and bind one variable to PLC address
8. Save all. Uncheck auto deploy for the library, and deploy all.
9. Launch variable monitor, browse to new variable, double click to monitor.
10. This will ALWAYS fail with "server failure". Don't worry, just exit completely out of LabVIEW.
11. Stop the Variable Engine service.
12. Run OPC server editor again, and load up the lpd file from your old project. Modify if needed, save, and set as startup
13. Start the Variable Engine service again.
14. Launch LabVIEW
15. Create a new empty project (I created mine in the same directory as my old 7.1 project resided)
16. Add an IO server, and uncheck auto deploy for its library
17. Save all
18. Run Tools->DSC->Migrate->import scf
19. Convert your old SCF file
20. Add the new library to your project (it will be named LabVIEW)
21. Uncheck auto deploy for the "LabVIEW" library you just added
22. Right click on the "LabVIEW" library and do deploy all
23. Save, and open the variable monitor
24. Browse to a tag in the LabVIEW library, and double click
25. This time it will actually monitor the variable, with a status of "Good"
26. Now you can add your main front panel VI to your project, open it and run it
27. Version 8.2 will select the proper legacy tag read/write VI's, whereas 8.0 does not. The writes however do not work. Replace them with shared variable writes. The reads work fine.
28. The empty project that you created in step 5 is a throw away. It will never work anyway.
29. So far the only variables that I can get to work at all are the ones that I import from an scf file, which is a pain, but if I must create all my tags in 7.1 and import them into 8.2 I will (for now). I may try exporting to Excel and copying variables that work in order to get functional new variables, since binding them in the editor does not work.
I hope this helps anybody else out there struggling with moving to 8+ DSC. I saw a few posts with similar issues, but without ANY answers at all. It's a convoluted solution that doesn't make a lot of sense, but for me it is repeatable.

Printing fails, gs crashes

In my workplace I have two printers a Ricoh Aficio and a HP Color LaserJet 5550 and they are running via a remote CUPS server. However I can browse their cups page via the remote cups web interface.
I downloaded the suggested drivers hplip and openprinting-ppds-pxlmono-ricoh, in cups as connection I use the webaddress http://cupsserver/printername and I select the correct driver.
However, each time I try to print I get filter failed on both printers.
In the /var log file are lines like:
D [05/Mar/2015:17:07:21 +0100] [Job 9] Running command line for gs: gs -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=ps2write -sOUTPUTFILE=%stdout -dLanguageLevel=3 -r600 -dCompressFonts=false -dNoT3CCITT -dNOINTERPOLATE -c 'save pop' -f /var/spool/cups/tmp/foomatic-uP3YzG
D [05/Mar/2015:17:07:21 +0100] [Job 9] Started filter gs (PID 30674)
D [05/Mar/2015:17:07:21 +0100] [Job 9] Started filter pstops (PID 30675)
D [05/Mar/2015:17:07:21 +0100] [Job 9] The print file is empty.
D [05/Mar/2015:17:07:21 +0100] [Job 9] PID 30674 (gs) crashed on signal 11!
D [05/Mar/2015:17:07:21 +0100] [Job 9] PID 30675 (pstops) stopped with status 1!
so it seems that ghostscript crashes with a segfault.
I used this printers with another arch machine, I do not actually remember the precise settings. But I guess a gs crash should not happen...
What can I try?
Last edited by ezzetabi (2015-03-05 16:39:54)

Hi,
the same here. I'm using Xerox machine so it's not printer dependent.
I had this printer working in the past but now it doesn't work with very similar error as you have.
E [11/Mar/2015:14:23:13 +0100] [Job 43] Job stopped due to filter errors; please consult the error_log file for details.
D [11/Mar/2015:14:23:13 +0100] [Job 43] The following messages were recorded from 14:23:13 to 14:23:13
D [11/Mar/2015:14:23:13 +0100] [Job 43] Adding start banner page "none".
D [11/Mar/2015:14:23:13 +0100] [Job 43] Adding end banner page "none".
D [11/Mar/2015:14:23:13 +0100] [Job 43] File of type application/pdf queued by "mirek".
D [11/Mar/2015:14:23:13 +0100] [Job 43] hold_until=0
D [11/Mar/2015:14:23:13 +0100] [Job 43] Queued on "MFD-304" by "mirek".
D [11/Mar/2015:14:23:13 +0100] [Job 43] time-at-processing=1426080193
D [11/Mar/2015:14:23:13 +0100] [Job 43] 3 filters for job:
D [11/Mar/2015:14:23:13 +0100] [Job 43] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [11/Mar/2015:14:23:13 +0100] [Job 43] pdftops (application/vnd.cups-pdf to application/vnd.cups-postscript, cost 100)
D [11/Mar/2015:14:23:13 +0100] [Job 43] - (application/vnd.cups-postscript to printer/MFD-304, cost 0)
D [11/Mar/2015:14:23:13 +0100] [Job 43] job-sheets=none,none
D [11/Mar/2015:14:23:13 +0100] [Job 43] argv[0]="MFD-304"
D [11/Mar/2015:14:23:13 +0100] [Job 43] argv[1]="43"
D [11/Mar/2015:14:23:13 +0100] [Job 43] argv[2]="mirek"
D [11/Mar/2015:14:23:13 +0100] [Job 43] argv[3]="filetoprint"
D [11/Mar/2015:14:23:13 +0100] [Job 43] argv[4]="1"
D [11/Mar/2015:14:23:13 +0100] [Job 43] argv[5]="PageSize=Letter Collate ColorModel=Grayscale Duplex=None job-uuid=urn:uuid:856fa9a1-131d-3cdb-458f-c3b7e015177e job-originating-host-name=localhost time-at-creation=1426080193 time-at-processing=1426080193"
D [11/Mar/2015:14:23:13 +0100] [Job 43] argv[6]="/var/spool/cups/d00043-001"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[7]="CUPS_STATEDIR=/run/cups"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[8]="HOME=/var/spool/cups/tmp"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[10]="SERVER_ADMIN=root@pracovni"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[11]="SOFTWARE=CUPS/2.0.2"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[13]="USER=root"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[14]="CUPS_MAX_MESSAGE=2047"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[17]="IPP_PORT=631"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[18]="CHARSET=utf-8"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[19]="LANG=en.UTF-8"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[20]="PPD=/etc/cups/ppd/MFD-304.ppd"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[21]="RIP_MAX_CACHE=128m"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[22]="CONTENT_TYPE=application/pdf"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[23]="DEVICE_URI=socket://10.163.24.24"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[24]="PRINTER_INFO=Xerox WorkCentre 5755 v1 Multifunction System"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[25]="PRINTER_LOCATION=MFD-304"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[26]="PRINTER=MFD-304"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[27]="PRINTER_STATE_REASONS=media-empty-warning"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[28]="CUPS_FILETYPE=document"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[29]="FINAL_CONTENT_TYPE=application/vnd.cups-postscript"
D [11/Mar/2015:14:23:13 +0100] [Job 43] envp[30]="AUTH_I****"
D [11/Mar/2015:14:23:13 +0100] [Job 43] Started filter /usr/lib/cups/filter/pdftopdf (PID 6122)
D [11/Mar/2015:14:23:13 +0100] [Job 43] Started filter /usr/lib/cups/filter/pdftops (PID 6123)
D [11/Mar/2015:14:23:13 +0100] [Job 43] Started backend /usr/lib/cups/backend/socket (PID 6124)
D [11/Mar/2015:14:23:13 +0100] [Job 43] STATE: +connecting-to-device
D [11/Mar/2015:14:23:13 +0100] [Job 43] Looking up "10.163.24.24"...
D [11/Mar/2015:14:23:13 +0100] [Job 43] pdftops - copying to temp print file "/var/spool/cups/tmp/017eb55064dbb"
D [11/Mar/2015:14:23:13 +0100] [Job 43] hrDeviceDesc="Xerox WorkCentre 5755 v1 Multifunction System"
D [11/Mar/2015:14:23:13 +0100] [Job 43] prtMarkerColorantValue.1.1 = "black"
D [11/Mar/2015:14:23:13 +0100] [Job 43] ATTR: marker-colors=#000000,#000000,#000000,#000000
D [11/Mar/2015:14:23:13 +0100] [Job 43] ATTR: marker-names='"Toner Bottle CRU"','"Xerographic CRU module"','"Fuser CRU module"','"Waste Toner Bottle CRU"'
D [11/Mar/2015:14:23:13 +0100] [Job 43] ATTR: marker-types=toner,transfer-unit,fuser,waste-toner
D [11/Mar/2015:14:23:13 +0100] [Job 43] ATTR: marker-levels=95,87,87,-1
D [11/Mar/2015:14:23:13 +0100] [Job 43] new_supply_state=0, change_state=ffff
D [11/Mar/2015:14:23:13 +0100] [Job 43] STATE: -developer-low-report
D [11/Mar/2015:14:23:13 +0100] [Job 43] STATE: -developer-empty-warning
D [11/Mar/2015:14:23:13 +0100] [Job 43] STATE: -marker-supply-low-report
D [11/Mar/2015:14:23:13 +0100] [Job 43] STATE: -marker-supply-empty-warning
D [11/Mar/2015:14:23:13 +0100] [Job 43] STATE: -opc-near-eol-report
D [11/Mar/2015:14:23:13 +0100] [Job 43] STATE: -opc-life-over-warning
D [11/Mar/2015:14:23:13 +0100] [Job 43] STATE: -toner-low-report
D [11/Mar/2015:14:23:13 +0100] [Job 43] STATE: -toner-empty-warning
D [11/Mar/2015:14:23:13 +0100] [Job 43] STATE: -waste-receptacle-almost-full-report
D [11/Mar/2015:14:23:13 +0100] [Job 43] STATE: -waste-receptacle-full-warning
D [11/Mar/2015:14:23:13 +0100] [Job 43] STATE: -cleaner-life-almost-over-report
D [11/Mar/2015:14:23:13 +0100] [Job 43] STATE: -cleaner-life-over-warning
D [11/Mar/2015:14:23:13 +0100] [Job 43] new_state=4, change_state=ffff
D [11/Mar/2015:14:23:13 +0100] [Job 43] STATE: +media-empty-warning
D [11/Mar/2015:14:23:13 +0100] [Job 43] STATE: -door-open-report
D [11/Mar/2015:14:23:13 +0100] [Job 43] STATE: -media-jam-warning
D [11/Mar/2015:14:23:13 +0100] [Job 43] STATE: -input-tray-missing-warning
D [11/Mar/2015:14:23:13 +0100] [Job 43] STATE: -output-tray-missing-warning
D [11/Mar/2015:14:23:13 +0100] [Job 43] STATE: -marker-supply-missing-warning
D [11/Mar/2015:14:23:13 +0100] [Job 43] STATE: -output-area-almost-full-report
D [11/Mar/2015:14:23:13 +0100] [Job 43] STATE: -output-area-full-warning
D [11/Mar/2015:14:23:13 +0100] [Job 43] backendWaitLoop(snmp_fd=7, addr=0x7fccfd0d5048, side_cb=0x7fccfbd87230)
D [11/Mar/2015:14:23:13 +0100] [Job 43] PID 6122 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [11/Mar/2015:14:23:13 +0100] [Job 43] Printer make and model: Xerox Xerox WorkCentre 7328/7335/7345
D [11/Mar/2015:14:23:13 +0100] [Job 43] Running command line for pstops: pstops 43 mirek 'Expense Report CZW40321666' 1 'PageSize=Letter ColorModel=Grayscale Duplex=None job-uuid=urn:uuid:856fa9a1-131d-3cdb-458f-c3b7e015177e job-originating-host-name=localhost time-at-creation=1426080193 time-at-processing=1426080193'
D [11/Mar/2015:14:23:13 +0100] [Job 43] Using image rendering resolution 600 dpi
D [11/Mar/2015:14:23:13 +0100] [Job 43] Running command line for gs: gs -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=ps2write -sOUTPUTFILE=%stdout -dLanguageLevel=3 -r600 -dCompressFonts=false -dNoT3CCITT -dNOINTERPOLATE -c 'save pop' -f /var/spool/cups/tmp/017eb55064dbb
D [11/Mar/2015:14:23:13 +0100] [Job 43] Started filter gs (PID 6125)
D [11/Mar/2015:14:23:13 +0100] [Job 43] Started filter pstops (PID 6126)
D [11/Mar/2015:14:23:13 +0100] [Job 43] The print file is empty.
D [11/Mar/2015:14:23:13 +0100] [Job 43] PID 6125 (gs) crashed on signal 11!
D [11/Mar/2015:14:23:13 +0100] [Job 43] PID 6126 (pstops) stopped with status 1!
D [11/Mar/2015:14:23:13 +0100] [Job 43] PID 6123 (/usr/lib/cups/filter/pdftops) stopped with status 1.
D [11/Mar/2015:14:23:13 +0100] [Job 43] Hint: Try setting the LogLevel to "debug" to find out more.
D [11/Mar/2015:14:23:13 +0100] [Job 43] PID 6124 (/usr/lib/cups/backend/socket) exited with no errors.
D [11/Mar/2015:14:23:13 +0100] [Job 43] End of messages
D [11/Mar/2015:14:23:13 +0100] [Job 43] printer-state=3(idle)
D [11/Mar/2015:14:23:13 +0100] [Job 43] printer-state-message="Filter failed"
D [11/Mar/2015:14:23:13 +0100] [Job 43] printer-state-reasons=media-empty-warning

Reading arrays of double from S7 with OPC & Datasocket

Hi friends:
We are developing an application with a S7-315-2DP PLC and a PC with a PCI1500PFB. We use the OPC server from Applicom. We read the data very quickly with the datasocket (arrays of boolean, arrays of doubles ...and so on, and a very big amount of data over 100 ms) but when we try to write arrays datasocket faield and we have to write item on item and the speed decrease. For intance, if we try to write doubles ( 50 items) the refresh period is over 5 seconds ( some times more since we launch the data and we read the same data on the PC). Perhaps we failed configuring the OPC but there isn´t many things to configure, perhaps the problem is the board configuration .. I don´t know.
We
try to find some examples that write an array of doubles on one time but..
Thank you for yours answers.
Javi

Hi Javi,
I'm not aware of any known issues writing to the Applicom OPC server. In LabVIEW there isn't anything special you need to configure to be able to write arrays of doubles through DataSocket. You can test this by using the DataSocket Server Manager, make a new member that is an array of doubles, and try reading and writing to that member. You may also want to check to make sure the data member the OPC server is expecting is an arry of doubles and not an array of singles or integers.

Canon MF5950dw throwing Stopped - 'filter' failed printer error

We just bought a Canon MF5950dw printer, and on a MBA running 10.8.2 when we try to print anything over the network, it'll stop with the error: Stopped - 'filter' failed.
I've:
repairing permissions from the rescue disk
tried deleting and re-adding the printer
uninstalled and reinstalled the drivers
reset the CUPS printing system
and nothing has helped. The MBA has no problem printing to our old printers. It works fine on the my MBP running 10.8.2 and our Windows 7 machines. It persists whether I set it up as a Bonjour printer or an IP printer.
Anyone know how to fix this? thanks!
Below is the cups error_log:
E [19/Jan/2013:16:29:39 -0500] [Job 6] Job stopped due to filter errors; please consult the error_log file for details.
D [19/Jan/2013:16:29:39 -0500] [Job 6] The following messages were recorded from 16:29:38 to 16:29:39
D [19/Jan/2013:16:29:39 -0500] [Job 6] Adding start banner page "none".
D [19/Jan/2013:16:29:39 -0500] [Job 6] Queued on "Canon_MF5900_Series" by "kelly".
D [19/Jan/2013:16:29:39 -0500] [Job 6] Auto-typing file...
D [19/Jan/2013:16:29:39 -0500] [Job 6] Request file type is application/vnd.cups-banner.
D [19/Jan/2013:16:29:39 -0500] [Job 6] File of type application/vnd.cups-banner queued by "kelly".
D [19/Jan/2013:16:29:39 -0500] [Job 6] Adding end banner page "none".
D [19/Jan/2013:16:29:39 -0500] [Job 6] time-at-processing=1358630978
D [19/Jan/2013:16:29:39 -0500] [Job 6] job-sheets=none,none
D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[0]="Canon_MF5900_Series"
D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[1]="6"
D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[2]="kelly"
D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[3]="testprint"
D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[4]="1"
D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[5]="AP_ColorMatchingMode=AP_ApplicationColorMatching AP_D_InputSlot= collate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMJobName=testprint com.apple.print.PrinterInfo.PMColorDeviceID..n.=16929 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 fit-to-page media=Letter pserrorhandler-requested=standard job-uuid=urn:uuid:62e1ae28-d482-3786-78e4-bade79b0939a job-originating-host-name=localhost time-at-creation=1358630978 time-at-processing=1358630978 PageSize=Letter"
D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[6]="/private/var/spool/cups/d00006-001"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[0]="<CFProcessPath>"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[8]="CUPS_STATEDIR=/private/etc/cups"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[9]="HOME=/private/var/spool/cups/tmp"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[11]="SERVER_ADMIN=root@localhost"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[12]="SOFTWARE=CUPS/1.6svn"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[14]="USER=root"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[15]="CUPS_MAX_MESSAGE=2047"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[16]="CUPS_SERVER=/private/var/run/cupsd"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[17]="CUPS_ENCRYPTION=IfRequested"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[18]="IPP_PORT=631"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[19]="CHARSET=utf-8"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[20]="LANG=en_US.UTF-8"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[21]="APPLE_LANGUAGE=en-US"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[22]="PPD=/private/etc/cups/ppd/Canon_MF5900_Series.ppd"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[23]="RIP_MAX_CACHE=128m"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[24]="CONTENT_TYPE=application/vnd.cups-banner"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[25]="DEVICE_URI=dnssd://Canon%20MF5900%20Series._pdl-datastream._tcp.local ./?bidi"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[26]="PRINTER_INFO=Canon MF5900 Series"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[27]="PRINTER_LOCATION="
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[28]="PRINTER=Canon_MF5900_Series"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[29]="PRINTER_STATE_REASONS=none"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[30]="CUPS_FILETYPE=document"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[31]="FINAL_CONTENT_TYPE=printer/Canon_MF5900_Series"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[32]="AUTH_I****"
D [19/Jan/2013:16:29:39 -0500] [Job 6] Started filter /usr/libexec/cups/filter/cgbannertopdf (PID 1149)
D [19/Jan/2013:16:29:39 -0500] [Job 6] Started filter /Library/Printers/Canon/CUPS_MF_Printer/Bins/capdftopdl (PID 1150)
D [19/Jan/2013:16:29:39 -0500] [Job 6] Started backend /usr/libexec/cups/backend/dnssd (PID 1151)
D [19/Jan/2013:16:29:39 -0500] [Job 6] capdftopdl start.
D [19/Jan/2013:16:29:39 -0500] [Job 6] Resolving "Canon MF5900 Series._pdl-datastream._tcp.local."...
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: +connecting-to-device
D [19/Jan/2013:16:29:39 -0500] [Job 6] Resolving "Canon MF5900 Series", regtype="_pdl-datastream._tcp", domain="local."...
D [19/Jan/2013:16:29:39 -0500] [Job 6] Looking for printer.
D [19/Jan/2013:16:29:39 -0500] [Job 6] Set job-printer-state-message to "Looking for printer.", current level=INFO
D [19/Jan/2013:16:29:39 -0500] [Job 6] Resolved as "socket://Canon0b182e.local.:9100/"...
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -connecting-to-device,offline-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] Executing backend "/usr/libexec/cups/backend/socket"...
D [19/Jan/2013:16:29:39 -0500] [Job 6] load_banner(filename="/private/var/spool/cups/d00006-001")
D [19/Jan/2013:16:29:39 -0500] [Job 6] Page = 612x792; 14,14 to 598,778
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: +connecting-to-device
D [19/Jan/2013:16:29:39 -0500] [Job 6] Looking up "Canon0b182e.local."...
D [19/Jan/2013:16:29:39 -0500] [Job 6] hrDeviceDesc="Canon MF5900 Series"
D [19/Jan/2013:16:29:39 -0500] [Job 6] prtMarkerColorantValue.1.1 = "black"
D [19/Jan/2013:16:29:39 -0500] [Job 6] ATTR: marker-colors=#000000
D [19/Jan/2013:16:29:39 -0500] [Job 6] ATTR: marker-names='"Canon CRG119 Black Toner"'
D [19/Jan/2013:16:29:39 -0500] [Job 6] ATTR: marker-types=toner
D [19/Jan/2013:16:29:39 -0500] [Job 6] ATTR: marker-levels=100
D [19/Jan/2013:16:29:39 -0500] [Job 6] new_supply_state=0, change_state=ffff
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -developer-low-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -developer-empty-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -marker-supply-low-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -marker-supply-empty-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -opc-near-eol-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -opc-life-over-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -toner-low-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -toner-empty-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -waste-receptacle-almost-full-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -waste-receptacle-full-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -cleaner-life-almost-over-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -cleaner-life-over-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] new_state=0, change_state=ffff
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -media-empty-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -door-open-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -media-jam-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -input-tray-missing-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -output-tray-missing-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -marker-supply-missing-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -output-area-almost-full-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -output-area-full-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] backendWaitLoop(snmp_fd=5, addr=0x7fe17b410178, side_cb=0x10a2e1013)
D [19/Jan/2013:16:29:39 -0500] [Job 6] align for banner 1.
D [19/Jan/2013:16:29:39 -0500] [Job 6] align for banner 1.
D [19/Jan/2013:16:29:39 -0500] [Job 6] PID 1149 (/usr/libexec/cups/filter/cgbannertopdf) exited with no errors.
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -com.canon.unsupportedsize-error
D [19/Jan/2013:16:29:39 -0500] [Job 6] PID 1151 (/usr/libexec/cups/backend/dnssd) exited with no errors.
D [19/Jan/2013:16:29:39 -0500] [Job 6] PID 1150 (/Library/Printers/Canon/CUPS_MF_Printer/Bins/capdftopdl) stopped with status 1.
D [19/Jan/2013:16:29:39 -0500] [Job 6] Hint: Try setting the LogLevel to "debug" to find out more.
D [19/Jan/2013:16:29:39 -0500] [Job 6] End of messages
D [19/Jan/2013:16:29:39 -0500] [Job 6] printer-state=3(idle)
D [19/Jan/2013:16:29:39 -0500] [Job 6] printer-state-message="Filter failed"
D [19/Jan/2013:16:29:39 -0500] [Job 6] printer-state-reasons=none

Maybe this will help:
https://discussions.apple.com/thread/4158755?tstart=0
If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.

PCO 2.2 - OPC and IP21

Hi,
We are looking at connecting to IP21 via PCO OPC DA connector.
Can PCo only poll the IP21 OPC server for eventing or can one set up the IP21 OPC server to advise PCO on data changes for
eventing purposes ?
Also what is required on the server where PCo is installed to enable OPC connectivity, for browsing the IP21 we have established that you need the following dlls in the PCo system directory :
cimsrvapi.dll
CimWin32Util.dll
infoplus21_api.dll
ip21admin_client.dll
ip21ezrpcw32.dll
ip21winrpc32.dll
libc21.dll
PCo is running on Windows server 2008 R2 and the IP21 is not on the same box.
thanks

Hi ,
I got it working to be able to get the notification working. Although one still cannot browse the IP21 tags, and all tags are still shown as a name space.
a. I installed the Matricon IP21 OPC server on the same box as IP21 Historian.
b. I connected to the IP21 server and configured new aliases in the Matricon IP21 OPC server to look at the IP21 tags
c. I then configured PCo OPC DA agent to look at the Matricon IP21 OPC server and got the subscriptions to work, and PCo can browse the MAtricon IP21 OPC server tags that I configured , so the browsing seems to work via this OPC server
d. Then I tried to fire up the OPC DA agent in PCo that I previously configured to look at the Aspentech IP21 OPC server, and the configuration now started to work (still can't browse the tags)
e. I uninstalled the Matricon IP21 OPC server and the configuration in step d. still worked.
So the conclusion is that the Matricon IP21 OPC server did some sort of a configuration that made the orginal configuration functional, this however now leaves me the question of what did this driver do to get things working.
Now I sit with a new challenge I have PCo installed on a seperate server and in a different domain as the IP21 OPC server.
What I have so far
1. The Same local user on both the PCo box and the IP21 OPC server with Admin rights
2. I can see the IP21 OPC server from the PCo box and access it
But the issue is as soon as I fire up the Agent to run it fails to start with the following error:
ConnectivityAgentProxy|"The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
Below is the PCo Log file:
Date Time| Machine| Thread ID| Process ID| Process Name| Event Type| Source| Message| Stack Trace
2012/02/24 04:12:01 PM|.|8|7888|IP21_OPC_DA|Information|AgentBase|Start ignored. Agent state = Faulted|""
2012/02/24 04:12:01 PM|.|6|7888|IP21_OPC_DA|Information|Host|WCF service is started.|""
2012/02/24 04:12:01 PM|.|6|7888|IP21_OPC_DA|Error|Host|failed to create ConnectivityAgentProxy|"The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly. Server stack trace: at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at SAP.Manufacturing.Connectivity.IPCoAgentControl.Start() at SAP.Manufacturing.Connectivity.ConnectivityAgentProxy.Start() at SAP.Manufacturing.Connectivity.WcfHost.Start()"
2012/02/24 04:12:01 PM|.|8|7888|IP21_OPC_DA|Error|ServiceFaultManager|Manufacturing Fault: REASON = The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly. ; SEVERITY = Fatal|""
2012/02/24 04:12:01 PM|.|8|7888|IP21_OPC_DA|Verbose|AgentBase|beginning PublishSubscribe CommunicationMode initialization...|""
2012/02/24 04:12:00 PM|.|8|7888|IP21_OPC_DA|Verbose|AgentBase|starting...|""
2012/02/24 04:12:00 PM|.|6|7888|IP21_OPC_DA|Information|Host|implicitly calling start on the hosted IConnectivityAgent service contract|""
2012/02/24 04:11:59 PM|.|6|7888|IP21_OPC_DA|Information|Host|using default NetTcpBinding endpoint for internal IConnectivityAgent proxy|""
2012/02/24 04:11:59 PM|.|6|7888|IP21_OPC_DA|Verbose|Host|Service endpoints:|""
2012/02/24 04:11:59 PM|.|6|7888|IP21_OPC_DA|Verbose|Host|SAP.Manufacturing.Connectivity.Agents.Opc.Da.OpcDaAgent is running with the following endpoints:|""
2012/02/24 04:11:58 PM|.|6|7888|IP21_OPC_DA|Information|Host|WCF service is starting.|""
2012/02/24 04:11:58 PM|.|1|7888|IP21_OPC_DA|Verbose|OpcDaAgent|Creating the OPC DA agent.|""
2012/02/24 04:11:58 PM|.|1|7888|IP21_OPC_DA|Verbose|BrowserSessionManager|Created browse manager.|""
2012/02/24 04:11:58 PM|.|1|7888|IP21_OPC_DA|Verbose|OpcDaAgent|Creating the OPC DA agent.|""
2012/02/24 04:11:58 PM|.|1|7888|IP21_OPC_DA|Verbose|BrowserSessionManager|Created browse manager.|""
2012/02/24 04:11:58 PM|.|1|7888|IP21_OPC_DA|Verbose|Host|Running [IP21_OPC_DA] as a windows service...|""

Ni hypertrend with opc data socket

hello,
i am going to use ni hypertren with labview dsc 8.6 version. i am not using shared variable here but using opc server + data socket i am reading all the channels of data. currently i am reading 300 channels of data over modbus tcp/ip network. all are thermocouple inputs and each module has an 8 channels of array of data which i defined, i tried using shared variable but here i need to create 300 variable for each channel then only i can able to insert these data values to the data base. but using data socket with opc server i can able to group it 8 channels/ module the i can able readuce my data set also it will be traceble one. to inserting data base i am making programming.
i checked the ni-hypertrend, i gone through the help, my question is can i plot the datas from opc data socket with out using shared variable...?
Regards,
Balaji DP

SOLVED
I just installed the runtime and copied the exe to the target. That doesn't work.
After I build a distribution with NI DataSocket component and installing it the copied OpcClient works. Even after uninstalling said distribution...
/* Nothing past this point should fail if the code is working as intended */

Plant Connectivity Error failed to create ConnectivityAgentProxy

Dear experts,
I currently installed installed PCo on a XP Machine and after I change the network ID of the PC and the workgroup the agent instance is not able to start properly. I receive the following message:
10.10.2011 22:28:32,.,6,1016,TEST_OPC,Error,Host,failed to create ConnectivityAgentProxy,"The server process could not be started because the configured identity is incorrect. Check the username and password.
Server stack trace:
   at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at SAP.Manufacturing.Connectivity.IPCoAgentControl.Start()
   at SAP.Manufacturing.Connectivity.ConnectivityAgentProxy.Start()
   at SAP.Manufacturing.Connectivity.WcfHost.Start()"
10.10.2011 22:28:32,.,8,1016,TEST_OPC,Error,ServiceFaultManager,Manufacturing Fault: REASON = The server process could not be started because the configured identity is incorrect. Check the username and password.
As the other applications like OPC Scout are able to connect to the DCOM (at least this is my understanding) in order to query the OCP Server, it seems to me that there is a Plant Connectivity problem. I tried to find out where the settings ConnectivityAgentProxy are detailed - I thought something like an .ini, .xml file - but unfortunately I did not find anything. Do you have any suggestion, advice?
Thanks in advance,
Florin
Before I start with installing image of the PC with the image before doing the network id name change i would like to ask you if there is any setting, configuration file

Do you have a named user entered for the Agent Instance Service User name/password? If so, you may have to delete and re-enter the name\password to reset this. If you are using DCOM over a workgroup, the same workgroup user name/password must be set up on both the PCo server and the OPC Server PC's.
Hope this helps.
- Steve

How to specify Attribute ID in OPC Server DevicenetExplicit

I'm trying to set up an Allen Bradley 842D Devicenet Absolute Encoder
using the OPC server. The manuals for the device mention that the
data can be retrieved from the various Attribute ID's in each
class. From the OPC Server Help example below, it starts to
describe the location of the data desired, but fails to show me
where I specify the attribute ID. For example, lets say in the
example below, I now want Attribute 2 or 3. How does the
below example tell me how?.
Since I'm trying to get all this data in via the IA OPC server,
I'm not planning on using the DNET Vi's. BUT.....I did look at
the "GetIdentityAttrs.vi" and notice that the VI's provided allow for
Class ID, Instance ID, and Attribute ID. All of which correctly
gives me the information I want when I run this VI with the 842D
encoder.
From OPC Server Online Help:
NIDeviceNetExplicit Example
Suppose you want to get attribute 1 from Class ID 1, Instance 3 of an
object. Class ID 1 is the Identity Class, where all the identification
information for the device is contained.
Enter the background information when you create the
NIDeviceNetExplicit object, setting the Service Code to 14 and the
Class ID to 1. From the manufacturer’s documentation, you know that
GetAttribute only accepts an unsigned integer (USINT) as a parameter.
The baud rate for the object in question is an 8-bit unsigned integer
(USINT). To read the baud rate, access the IID3.USINT0 data member.
From the Above, this is what how i'm interpreting the configuration: IID ( Instance ID).USINT (data offset)
To re-iterate my question: How do I specify the Attribute ID when using the IA OPC Server DeviceNetExplicit Object?
Regis

Hi Regis,
The general steps to send & receive the explicit message using the NI OPC Server:
Configure an OPC item to write the explicit message, you have to set the attribute ID for the GET request message here.
Configure an OPC item to read the explicit message, you will get the explicit response from it.
Example: Read the Vendor ID (ClassID=1, InstanceID=1, AttributeID=1, DataType=UINT)
(1) Configure the NIDeviceNetExp object with the right MAC ID, ServiceCode=14(GET), ClassID=1
(2) Add an OPC item (Data Member) NIDeviceNetExp1.IID1.USINT0 to write the parameter.
(3) Add an OPC item (Data Member) NIDeviceNetExp1.IID1.UINT0 to read the Vendor ID.
(4) Then you get the alarm message in IA OPC server and get failure message in your OPC client , if you have one started allready, because it reads the item automatically.
The magic action is here: you write the value 1 to NIDeviceNetExp1.IID1.USINT0. (then the attribute ID 1 is set correctly).
You can get the vendor ID then reading NIDeviceNetExp1.IID1.UINT0.
2. Example: If you want to get the Serial Number (ClassID=1, InstanceID=1, AttributeID=6, DataType=UDINT)
Add an OPC item NIDeviceNetExp1.IID1.UDINT0
You write the value 6 to NIDeviceNetExp1.IID1.USINT0
You can get the Serial Number in NIDeviceNetExp1.IID1.UDINT0
So you can conclude that:
(1) if you write to NIDeviceNetExp1.IID1.USINT0, USINT is the data type used to encode the request message parameter.
(2) if you read from NIDeviceNetExp1.IID1.UDINT0, UDINT is the data type used to decode the response message.
Attached you can find an example using LV and Datasocket to read the Vendor ID.
Hope that helps with your problem.
DirkW
Attachments:
DNET to OPC Item.vi ‏44 KB

Brbackup failed with errors

Hi,
We are having problem to take backup usin brtools, the following error message showingup, please tell me step by step to resolve this issue.
BR0051I BRBACKUP 7.00 (11)
BR0055I Start of database backup: bduvdxea.afd 2007-03-16 06.08.44
BR0252E Function fopen() failed for '/oracle/E04/sapbackup/backE04.log' at location main-10
BR0253E errno 13: Permission denied
BR0121E Processing of log file /oracle/E04/sapbackup/backE04.log failed
BR0056I End of database backup: bduvdxea.afd 2007-03-16 06.08.44
BR0280I BRBACKUP time stamp: 2007-03-16 06.08.44
BR0054I BRBACKUP terminated with errors
BR0292I Execution of BRBACKUP finished with return code 3
BR0668I Warnings or errors occurred - you can continue to ignore them or go back to repeat the last action
BR0280I BRTOOLS time stamp: 2007-03-16 06.08.44
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
Regards
Srinivas

Thanks Vinod, Suni. I changed permissions based on OSS# 113747, but still getting error.
errors, file permissions and env file information shown below. Please suggest me , if any thing wrong.
Regards
Srinivas.
brbackup as <orasid>
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
c
BR0280I BRTOOLS time stamp: 2007-03-16 08.03.01
BR0663I Your choice: 'c'
BR0259I Program execution will be continued...
BR0291I BRBACKUP will be started with options '-p initE04.sap -d disk -t offline
-m all -k yes -e 0 -l E'
BR0280I BRTOOLS time stamp: 2007-03-16 08.03.01
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
c
BR0280I BRTOOLS time stamp: 2007-03-16 08.03.04
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0051I BRBACKUP 7.00 (11)
BR0055I Start of database backup: bduvehhx.afd 2007-03-16 08.03.05
BR0252E Function fopen() failed for '/oracle/E04/sapbackup/backE04.log' at locat
ion main-10
BR0253E errno 13: Permission denied
BR0121E Processing of log file /oracle/E04/sapbackup/backE04.log failed
BR0056I End of database backup: bduvehhx.afd 2007-03-16 08.03.05
BR0280I BRBACKUP time stamp: 2007-03-16 08.03.06
BR0054I BRBACKUP terminated with errors
BR0292I Execution of BRBACKUP finished with return code 3
BR0668I Warnings or errors occurred - you can continue to ignore them or go back
to repeat the last action
BR0280I BRTOOLS time stamp: 2007-03-16 08.03.06
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
brbackup as <sid>adm
BR0051I BRBACKUP 7.00 (11)
BR0055I Start of database backup: bduvejbt.afd 2007-03-16 08.22.57
BR0252E Function fopen() failed for '/oracle/E04/sapbackup/backE04.log' at location main-10
BR0253E errno 13: Permission denied
BR0121E Processing of log file /oracle/E04/sapbackup/backE04.log failed
BR0056I End of database backup: bduvejbt.afd 2007-03-16 08.22.57
BR0280I BRBACKUP time stamp: 2007-03-16 08.22.57
BR0054I BRBACKUP terminated with errors
BR0292I Execution of BRBACKUP finished with return code 3
BR0668I Warnings or errors occurred - you can continue to ignore them or go back to repeat the last action
BR0280I BRTOOLS time stamp: 2007-03-16 08.22.57
brtools files permissions: /usr/sap/<SID>/SYS/exe/run
***********************************************************************************************-rwsrwxr-x   1 orae04     sapsys     3539712 Mar 14 23:18 brarchive
-rwsrwxr-x   1 orae04     sapsys     3649872 Mar 14 23:18 brbackup
-rwsrwxr-x   1 orae04     sapsys     4767888 Mar 14 23:18 brconnect
-rwxr-xr-x   1 e04adm     sapsys     3960440 Mar 14 23:18 brrecover
-rwxr-xr-x   1 e04adm     sapsys     1439520 Mar 14 23:18 brrestore
-rwxr-xr-x   1 e04adm     sapsys     4911024 Mar 14 23:18 brspace
-rwsrwxr-x   1 orae04     sapsys     2008984 Mar 14 23:18 brtools
Environment Variables:
USER=e04adm
LOGNAME=e04adm
HOME=/home/e04adm
PATH=/oracle/E04/102_64/bin:.:/home/e04adm:/usr/sap/E04/SYS/exe/run:/usr/bin:/opt/ansic/bin:/usr/ccs/bin:/usr/contrib/bin:/opt/nettladm/bin:/opt/fc/bin:/opt/fcms/bin:/
opt/upgrade/bin:/opt/pd/bin:/usr/bin/X11:/usr/contrib/bin/X11:/opt/resmon/bin:/opt/hparray/bin:/opt/perf/bin:/opt/ignite/bin:/opt/hpnpl//bin:/opt/graphics/common/bin:/
opt/gnome/bin:/opt/mozilla:/usr/sbin/diag/contrib:/opt/mx/bin:/opt/wbem/bin:/opt/wbem/sbin:/opt/langtools/bin:/opt/imake/bin:/opt/OV/bin/OpC
MAIL=/var/mail/e04adm
SHELL=/usr/bin/csh
TZ=EST5EDT
SSH_CLIENT=10.107.6.89 1166 22
SSH_CONNECTION=10.107.6.89 1166 10.100.19.114 22
DISPLAY=10.100.19.114:10.0
LOG_SFTP=0
SFTP_LOG_FACILITY=2
SFTP_LOG_LEVEL=3
SFTP_UMASK=
SFTP_PERMIT_CHMOD=1
SFTP_PERMIT_CHOWN=1
SAPSYSTEMNAME=E04
DIR_LIBRARY=/usr/sap/E04/SYS/exe/run
SHLIB_PATH=/usr/sap/E04/SYS/exe/run:/oracle/client/10x_64/instantclient
THREAD=NOPS
dbms_type=ORA
dbs_ora_tnsname=E04
dbs_ora_schema=SAPE04
ORACLE_SID=E04
DB_SID=E04
ORACLE_HOME=/oracle/E04/102_64
ORACLE_BASE=/oracle
TNS_ADMIN=/oracle/E04/102_64/network/admin
ADD=/oracle/client/10x_64/instantclient
NLS_LANG=AMERICAN_AMERICA.WE8DEC
SAPDATA_HOME=/oracle/E04
WINDOWID=4194330
TERM=hp
COLUMNS=167
LINES=54
MANPATH=/usr/share/man/%L:/usr/share/man:/usr/contrib/man/%L:/usr/contrib/man:/usr/local/man/%L:/usr/local/man:/opt/upgrade/share/man/%L:/opt/upgrade/share/man:/usr/dt
/share/man:/opt/pd/share/man/%L:/opt/pd/share/man:/opt/ignite/share/man/%L:/opt/ignite/share/man:/opt/resmon/share/man:/opt/hparray/share/man/%L:/opt/hparray/share/man
:/opt/perf/man/%L:/opt/perf/man:/opt/hpnpl//man:/opt/graphics/common/man:/opt/mx/share/man:/opt/samba/man:/opt/pd/share/man/%L:/opt/pd/share/man:/opt/pd/share/man/%L:/
opt/pd/share/man:/opt/pd/share/man/%L:/opt/pd/share/man:/opt/gnome/man:/opt/wbem/share/man:/opt/audio/share/man:/opt/ansic/share/man/%L:/opt/ansic/share/man:/opt/langt
ools/share/man/%L:/opt/langtools/share/man:/opt/image/share/man:/opt/imake/man:/opt/ssh/share/man

OPC/DSC/Kepware Server

When I attempt to deploy my application, I receive "Deployment failed: The client process cannot communicate with the configuration server process....."
I have DSC Run Time module on the target machine and I can read the OPC tags on the Kepware Quick Client so I narrowed it down to something to do with LV. I've read about the "identity of interactive user" and I do have that checked in the DCOM for the client server.
Thanks in advance for the help/ideas.

Daniel, here is the error message I receive.
The OPC server is located on 192.168.1.10 so it is the same subnet
Attachments:
deploymenterror.JPG ‏43 KB

Dsc:| |-QueryInterface IID_IOPCBrowse: (FAILED, HRESULT=0x80004002 No such interface supported )

Hi, I'm moving my application from LV/DSC 8.5 to 8.6.1 and I'm getting the following problem.
I created an OPC Client I/O server to connect to the Eldridge Engineering Inc. Modbus - OPC server (http://www.opcsystems.com/modbus.htm). This server is DA 2.5 and supports Hierarchical browsing. Looking to the client loggin file I found the following error:
| |-QueryInterface IID_IOPCBrowse: (FAILED, HRESULT=0x80004002 No such interface supported )
Apparently the client / server behaves properly when I read (by the "Distributed System Manager" tool) few items at time, but the client is disconnected when I ask to read few tens of items in one shot. There is no way to reconnect it, only way is to undeplpoy the client and deploy it again. I don't know if the two problems are related each other.
Any help is really welcome :-)
cheers
gaetano maron

Hi Gaetano,
error 80004002 may require that you re-register the OPC server. See the following document for details:
Errors Connecting to OPC Server When Using DataSocket as an OPC Client in LabVIEW
Tools for Troubleshooting OPC Interface Problems
Furthermore, I have a couple of questions:
Do you have both LV 8.5 and 8.6.1 installed on the same machine? Or they run on different PCs?
I've browsed to the URL you forwarded http://www.opcsystems.com/modbus.htm It seems that Eldridge server also has a Modbus interface for communicating between applications. As a possible workaround, have you tried to use a Modbus I/O server for interfacing with Eldridge SW? Here there are some tips about how doing this:
Using Modbus I/O Servers (DSC and RT Modules)
Troubleshooting Modbus I/O Servers (DSC Module)
Introduction to Modbus (see chapter "MODBUS I/O servers")
Hope this helps,
Best Regards,
Fabio
Fabio M.
National Instruments
Embedded & OEM Systems Engineer

OPC Connection faliure/status using LabView & Protool

Hi there,
we are integrating NI Vision solution into Siemens Step7/Protool automation environment. Two CVS modules perform visual inspection and communicate via Ethernet with Siemens Protool vizualization/GUI application running on Windows XP based PC. Protool is serving as OPC 2.0 compliat server and LabView "helper" application on PC is mirroring OPC data to and from NI PSP (Shared variable) domain which NI CVS-es use to communicate. All works well until we shut down and/or restart Protool (and thus the OPC service along with it).
Helper application fails to acknowledge any Connection Status change (as its status remains: Connected) if/when OPC is turned off ... furthermore once the Protool OPC is up and running again the values in LabView OPC bound items within helper app. cease to be updated although their Connection Status Property is shown as: Connected throughout ...
Has anyone had a similar problem? What could be the cause/solution to the behavior described?
Thanks in advance,
Robert

Hi Mike,
LabView "helper" app. is residing on Win PC and has controls that are data-bound to ProTool OPC via datasocket. The PC hosts shared variables that CVS-es use to communicate to PC. helper app. is transfering data between ProTool OPC and NI PSP network as necessary. If OPC is "power cycled" the "datasocket LED" of OPC DataBound controls remains green as nothing happened! If we use DataSocket (DS) pallete to programatically open DS conneciton to an OPC item, connection is rejected if OPC is not running, but once connected the "connection:status" property wont change if we shutdown the OPC!
Why is this happening? Is there a manner to detect the "running" status op OPC? Is there a more elegant way to bring OPC and NI PSP network together that would bypass the need for data pooling? Would the functionality of DSC help, like "register for events notification" function?
We would sure could use a quick soultion to this ...
Thx and regards, Robert

Error -2147467259, can't add item to OPC Server

I am using a DataSocket connection to read/write through an OPC Server (GE SRTP) to PLC software (PME). Everything works fine on my 2 different development PC's in my office, both in .vi form, and executable. I have distributed my executable on our network, and 2 of the 4 PC's we use to test product work fine. The other 2 PC's have the same problem, error -2147467259, can't add item to OPC server. When the OPC Server is called by LabVIEW, it launches successfully, but immediatly shows the 'can't add item to OPC Server'. I believe that it has to do with the registry. I registered the opcproxy.dll, and it still fails. LabVIEW 7.1, Windows XP machines.
Thanks, Alan

Duplicate post, please refer to:
http://forums.ni.com/ni/board/message?board.id=140&message.id=23173&requireLogin=False
For original thread.
I would like to echo Sam's inquiry about launching the OPC server outside of LabVIEW and verifying that it can be connected to. Also, under what user name is the OPC server being launched? Sometimes you can run into trouble if the user name is not the current user logged onto the system, but I haven't heard of it causing this error. You can see what user launched the service under Control Panel >> Administrative Tools >> Services. You can verify the default user running the application by going to Control Panel >> Administrative Tools >> Component Services and navigating to Component Services >> Computers >> My Computer >> DCOM Config Right click on your DCOM server and select Properties. Then go to the Identity tab and make sure The Interactive User is selected.
Brian Coalson
Software Engineer
National Instruments

Opc server runtime timeout

Hi, so I can't use OPC server because the connection that it tries to do always fails and I get an timeout. What am I missing? In my own computer OPC server doesn't do that. I don't even know what that runtime thing does but I figured it needs to be working before I can get to launch the Quick Client... Do I need to install something or what, can someone help me?

If you mean NI OPC Server, it is a trial.
If you mean can Lookout act as an OPC server, it is full.
Forshock - Consult.Develop.Solve.

OPC failed

Similar Messages

Maybe you are looking for