Open Hub Header and Trailer Record.

Hi,
For the Open Hub Destination
Destination Type is File,
Application server.
Type of File Name: 2 Logical File name.
How to to the get the Header and Trailer Record which will contain Creation Date, Creation Time and Total number of records.
Header record Layput :
Creation Date (YYYYMMDD)
Creation Time (HHMMSS)
Total record Count
Trailer record Layout:
Total number of Records in the file and
XXXX( Key Figure ) Total.
Thanks in advance.
Regards,
Adhvi.

Hi Venkat,
write a UDF in following way...
pass the first parameter as the detail node (cache the whole queue) to the UDF pass the second parameter as the trailer countto the UDF
now loop through the detail records get the count with a counter variable
check the counter against the trailer count outside the loop
if it doesnot match trigger the alert from the UDF itself
Check the below link for triggering alert from an UDF
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function

Similar Messages

Header and Trailer record validations

Hi
I have scenario file-xi-proxy. File contains the header record, detail record and trailer record
In header record i am getting date field, in header i have to do validation like header record exits and it should be in date format.
In Trailer record i have to do Total records and Total amount equals to Total records processed and total amount.
And amount value should be greater than zero..
My source structure
DT_ ACEAwardInformation
Header
BeginDate
EndDate
DetailRecord
Field1
Field2
Field3
Field4
TrailerRecord
TotalRecord
TotalAmount
Even content conversion parameters.
venkat

Hi Venkat,
write a UDF in following way...
pass the first parameter as the detail node (cache the whole queue) to the UDF pass the second parameter as the trailer countto the UDF
now loop through the detail records get the count with a counter variable
check the counter against the trailer count outside the loop
if it doesnot match trigger the alert from the UDF itself
Check the below link for triggering alert from an UDF
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function

Header and Trailer record handling in ODI

Hi All,
I have a delimited file which I am trying to load into Oracle DB using Oracle Data Integrator. We are using SQLLDR LKM for this. Since we have header, trailer have different format than the data records, so we have another interface which loads data. Since we have the requirement to load the data into another control table for audit purpose we have another interface.
What happens when we load the file, because of two interfaces the file scan happens 2 twice. This increases the overall turnaround time. Please note these interfaces work on filter basis for a field called record_type. 0,1,2 are the values for this field which mean header, data and trailer respectively. What we are looking for is how to restrict this double scanning of file for header-trailer and data records. What are the options which can be used here.
Regards,
Prashant

Hi Prashant
You can use a combination of external table and multi table insert. In ODI 11g there is a Oracle Multi Table Insert IKM. You will have to have one interface which has the source as the file and the target is a temporary target. The LKM will use LKM File to External Table, the IKM will use Oracle Multi Table IKM, and it will set DEFINE_QUERY. Also the LKM should set DELETE_TEMPORARY_OBJECTS to false. Then define 2 interfaces to load your 2 targets for example. The first target loading interface will use the 1st interface as a source and the MTI IKM again will use the MTI IKM and set IS_TARGET_TABLE to true and execute to false. Then the second target loading interface will use the 1st interface as a source and the MTI IKM again wil set IS_TARGET_TABLE to true and execute to true.
Cheers
David

Checking header and trailer record

Hi
Plz can any one guide me writing UDF for checking whether header record exists or not
i am using node funtion Exits...
In UDF i wanna check the value of Exists if it is true continue the process if it is false raise an exception
How we write UDF for that
venkat

Hi.....Venkat,
1.Import ur sender & reciever XSD files.
2.A user defined function is created before doing the mapping where we write the java code to achieve the looping conditions.
3.At the time of creating the function we should have two arguments (ex.a & b)(importing parameters) to it.then the java code is written for the conditions.
4.write ur code.
5. then using the user defined function further mapping is done.In this way the conditions are achieved during mapping.
******************if it helpful points will be rewarded*********************************
Regards,
Naresh.K

How to do the header and trailer validation in the input file?

hi,
what are the ways we can validate whether header and trailer record exists in the input file?
how to do that?
regards
Ruban

File to Proxy Validation
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/99593f86-0601-0010-059d-d2dd39dceaa0
/people/swaroopa.vishwanath/blog/2005/06/24/generic-approach-for-validating-incoming-flat-file-in-sap-xi--part-1
/people/swaroopa.vishwanath/blog/2005/06/29/generic-approach-for-validating-incoming-flat-file-in-sap-xi--part-ii
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy

How to Seggragate Header, Footer and Trailer Records in Informatica Cloud ?

Hi All, This is my source file Structure which is Flat File. Source File : "RecordType","Creation Date","Interface Name""H","06-08-2015","SFC02""RecordType","Account Number","Payoff Amount","Good Through Date""D","123456787","2356.14","06-08-2015""D","12347","2356.14","06-08-2015""D","123487","235.14","06-08-2015""RecordType","Creation Date","TotalRecordCount""T","06-08-2015","5" The Source File has to be loaded into three targets for Header , Detail and Trailer records separately. Target Files: File 1 : Header.txt
"RecordType","Creation Date","Interface Name""H","06-08-2015","SFC02" File 2 : Detail.txt "RecordType","Account Number","Payoff Amount","Good Through Date""D","123456787","2356.14","06-08-2015""D","12347","2356.14","06-08-2015""D","123487","235.14","06-08-2015" File 3 : Trailer.txt "RecordType","Creation Date","TotalRecordCount""T","06-08-2015","5" I tired this solution below : 1. Source ---> Expression ]-----filter 1---Detail.txt -----filter 2---Trailer.txt In source , I will read the records starting from 3rd row. This is because, if i read from first row, the detail part contains more fields when compared to Header part. Header Part contains only three fields. So it is taking only first three fields records in Detail Section as well.That's why I am skipping the first two records(Header fields and header record) .. refer the example.. In filter 1, condition is Record_Type = 'D'. In Filter 2 , condition is Record_Type = 'T'.So, the filter 1 will load to Detail.txt and Filter 2 Will load to Trailer.txt In task , pre session command, Calling the windows .bat script to fetch the first two lines and load into Header.txt This solution is working fine.. My query is can we use two pipeline flow in a same mapping in Informatica cloud.? Pipeline Flow 1 Source ---> Expression ]-----filter 1---Detail.txt -----filter 2---Trailer.txtPipeline Flow 2 Source ---> Expression ]-----filter 3(Record_Type='H')---Header.txt Source file is same in two flows. In first flow, I will read from the third row, skipping the header section as I mentioned earlier.In second flow , I ll read the entire content and take only header record and load into target. If I add the flow 2 to existing flow 1. I am getting the below error..TE_7020 Internal error. The Source Qualifier [Header_Source] contains an unbound field [Creation_Date]. Contact Informatica Global Customer Support. 1. Do informatica Cloud supports, two parallel flow in a same mapping ?2. Any other best solution for my requirement? Since I am new to Informatica Cloud, Can anyone suggest any other solution if you have?? It will be more helpful if you guys suggest a good solution .. ThanksSindhu Ravindran

We are using a Webservices Consumer Tranformation in our mapping to connect to RightFax Server using a WSDL url via Business Service in a mapping.Here in the mapping, where we are sending the input parameters through a flat file and then connecting to Rightfax Server via WS Consumer transformation and then fetching the data and writing to a Flat File. 07/28/2015 10:10:49 **** Importing Connection: Conn_000A7T0B0000000000EM ...07/28/2015 10:10:49 **** Importing Source Definition: SRC_RightFax_txt ...07/28/2015 10:10:49 **** Importing Target Definition: GetFax_txt ...07/28/2015 10:10:49 **** Importing Target Definition: FaultGroup_txt ...07/28/2015 10:10:49 **** Importing SessionConfig: default_session_config ... <Warning> : The Error Log DB Connection value should have Relational: as the prefix. <Warning> : Invalid value for attribute Error Log DB Connection. Will use the default value Validating Source Definition SRC_RightFax_txt... Validating Target Definition FaultGroup_txt... Validating Target Definition GetFax_txt...07/28/2015 10:10:49 **** Importing Mapping: Mapping0 ... <Warning> : transformation: RIghtfax - Invalid value for attribute Output is repeatable. Will use the default value Never [transformation< RIghtfax > ] Validating transformations of mapping Mapping0...Validating mapping variable(s).07/28/2015 10:10:50 **** Importing Workflow: wf_mtt_000A7T0Z00000000001M ... <Warning> : Invalid value Optimize throughout for attribute Concurrent read partitioning. Will use the default value Optimize throughput [Session< s_mtt_000A7T0Z00000000001M > --> File Reader< File Reader > ] <Warning> : The value entered is not a valid integer. <Warning> : Invalid value NO for attribute Fail task after wait time. Will use the default value Successfully extracted session instance [s_mtt_000A7T0Z00000000001M]. Starting repository sequence id is [1048287470] Kindly provide us a solution. Attached are logs for reference.

How to generate Header and Trailer for a file

Hi Guru
How can we generate header and Trailer for a file
EX:
i want to generate header with date and trailer with record count from table.
Sample file :
20120120
fwsfs
adfwsfd
adff
afsadf
afdwsg
adgsg
adgsgg
asgdsag
sdgasgdaf
sdfsagfadf
10

Hi ,
1.Create an interface to load data from oracle to file and set generate header as false option in IKM .
2.Create variable get_current_date of alphanumeric datatype and implement logic SELECT to_Char(SYSDATE,'yyyymmdd') FROM DUAL under refreshing tab
3.Create variable get_record_count of numeric datatype and implement logic SELECT '<%=odiRef.getPrevStepLog("INSERT_COUNT")%>' FROM DUAL under refreshing tab
4.Create a package
Drag the get_current_date variable ,
Drag odioutfile and paste the below logic OdiOutFile "-FILE=D:\ODI_TEST\emp.txt" "-CHARSET_ENCODING=ISO8859_1" "-XROW_SEP=0D0A" #GET_current_date in command tab
Drag the interface
Drag another variable get_Record_count
Drag the odioutfile and paste the below logic OdiOutFile "-FILE=D:\ODI_TEST\emp.txt" -APPEND "-CHARSET_ENCODING=ISO8859_1" "-XROW_SEP=0D0A"
#GET_RECORD_COUNT in command tab
Link all these in sequence,save and run the package.
OR Modify the IKM SQL to File Append to achieve same functionality.
Thanks,
Anuradha

Receiver FCC Structure For Header and Trailer

Hi Guys ,
I need to go for receiver FCC for header and trailer in PI .How the FCC in communication channel needs to be configured if I am taking a separate node for header and trailer in mapping .Output of the file should be as the file attached.
Thanks.
Regards.

Hi,
If you are using File communication channel as a reciver you can go with FCC.
Use record set structure as : Header,detail,trailer.
https://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Otherwise if you are going for SFTP to create the file ... follow the Indrajit suggestion..
Still facing any issue.. Please let us know..
Thanks,
Sreenivas...

Spooling data with Header and trailer

Hi everyone,
I have a problem in spooling the data.
I get a .dat file to load into db .That .dat file will be having header,records,trailer.While loading into the db i load only the records .
I load the .dat file into table using sqlldr with direct= true and parallel=true.
I load data into one table.header and trailer into one table(Loading into two different tables using three control file each for header,records,trailer to load from same .dat file).But while spooling the data out after some modifications to the table.i need to spool it with the header and trailer.I am able to spool only the records but not header and trailer.
That header and trailer are in standard form,everytime i get the .dat file.
Help me how to spool data from a table with the HEADER & TRAILER in the spool file.
Thanks

Some may argue this is not the right forum - database general might have been a little been than downloads - but now the thread is here I'll try an answer.
As I see it It depends on your spooling tool.
Lets assume you are using sqlplus.
I that case the sql prompt command may serve your purpose
Alternatively
select 'header' from dual
union all
select field1||','||field2||','field3 .... /*must single string expression but may concatentate field */ from somtable
union all
select 'trailer' from dual;may suit.
However I fear either I have not understood the question or if I have understood the question that you may have difficulties implementing this.
Edited by: bigdelboy on 19-Apr-2009 14:32

Outbound file interface - Header and item record transfer issue

Hi.
Pls help me complete this work by today:
I have to pass header and item record into file in application server.
I am retrieving Header record from table MCHB & RESB
and item record from MKOL & LFA1
I have to create separate file per plant ( plant is multiple selection field)
I have a check box (p_sob) for special stock selection in my selection screen .
If p_sob is initial
Header record should come from MCHB and RESB
and corresponding item entries from MKOL and LFA1
If some batch entries entries only exists in MCHB and not in MKOL then item fields will be blank
However if some entries exists only in MKOL and not in MCHB then header fields will be filled by correponding item fields.
Can anyone tell me the basic frame of the program.
Regards,
Simran

*&      Form sub_populate_header
      Subroutine to populate header table
FORM sub_populate_header.
DATA:   l_clabs   TYPE char13,     "Valuated stock
          l_bdmng   TYPE char13,     "Requirement quantity
          l_avqty   TYPE char13,     "Available quantity
          l_slabs   TYPE char13.     "Consignment stock
DATA: i_mkol_tmp type standard table of ty_mkol initial size 0.
LOOP AT i_mchb INTO wa_mchb.
    READ TABLE i_mkol INTO wa_mkol WITH KEY matnr = wa_mchb-matnr
                                            werks = wa_mchb-werks
                                            lgort = wa_mchb-lgort
                                            charg = wa_mchb-charg
                                            BINARY SEARCH.
    IF sy-subrc EQ 0.
*Mark those MKOL records for deletion
      wa_mkol-mark = c_mark.         "marked for deletion
    ELSE.
*Population of Plant,material number,batch,storage location and
*valuated stock
      wa_header-werks = wa_mchb-werks.              "Plant
      wa_header-matnr = wa_mchb-matnr.              "Material number
      wa_header-charg = wa_mchb-charg.              "Charg
      wa_header-lgort = wa_mchb-lgort.              "Storage location
      wa_header-clabs = wa_mchb-clabs.              "Valuated stock
      l_clabs = wa_header-clabs.
      SHIFT l_clabs LEFT DELETING LEADING space.
*Population of material description
      READ TABLE i_makt INTO wa_makt WITH KEY matnr = wa_header-matnr.
      IF sy-subrc EQ 0.
      wa_header-maktx = wa_makt-maktx.             "Material description
      ENDIF.
*Population of Requirement quantity
      READ TABLE i_sum INTO wa_sum WITH KEY charg = wa_header-charg
                                            BINARY SEARCH.
      IF sy-subrc EQ 0.
      wa_header-bdmng = wa_sum-bdmng.              "Requirement quantity
        l_bdmng = wa_header-bdmng.
        SHIFT l_bdmng LEFT DELETING LEADING space.
      ENDIF.
*Population of Available quantity
      l_avqty = l_clabs - l_bdmng.
      SHIFT l_avqty LEFT DELETING LEADING space.
      wa_header-avqty = l_avqty.                   "Available quantity
      APPEND wa_header TO i_header.
      CLEAR wa_header.
    ENDIF.
ENDLOOP.
*Deleting batches from MKOL which exists in MCHB
i_mkol_tmp[] = i_mkol[].
DELETE i_mkol_tmp WHERE mark = c_mark.
*Sorting I_MKOL
SORT i_mkol_tmp BY matnr werks charg lgort.
LOOP AT i_mkol_tmp INTO wa_mkol_tmp.
*Population of Plant,Material number,charg & Storage location
    wa_header-werks = wa_mkol_tmp-werks.        "Plant
    wa_header-matnr = wa_mkol_tmp-matnr.        "Material number
    wa_header-charg = wa_mkol_tmp-charg.        "Batch number
    wa_header-lgort = wa_mkol_tmp-lgort.        "Storage location
    APPEND wa_header TO i_header.
    CLEAR wa_header.
ENDLOOP.
ENDFORM.                    " sub_populate_header
*&      Form sub_populate_item
      Subroutine to populate item table
FORM sub_populate_item .
LOOP AT i_mkol INTO wa_mkol.
    wa_item-lifnr = wa_mkol-lifnr.      "Vendor number
    wa_item-slabs = wa_mkol-slabs.      "Consignment stock
    READ TABLE i_lfa1 INTO wa_lfa1 WITH KEY lifnr = wa_mkol-lifnr
                                            BINARY SEARCH.
    IF sy-subrc EQ 0.
      wa_item-name1 = wa_lfa1-name1.       "Vendor name
    ENDIF.
ENDLOOP.
ENDFORM.                    " sub_populate_item
*&      Form sub_batch_stock
      Subroutine to output batch record from table (MCHB & MKOL) into
      file in application server
FORM sub_batch_stock .
DATA:   l_record TYPE string,      "String
          l_clabs   TYPE char13,     "Valuated stock
          l_bdmng   TYPE char13,     "Requirement quantity
          l_avqty   TYPE char13,     "Available quantity
          l_slabs   TYPE char13,     "Consignment stock
          l_tabix   TYPE sytabix.    "Index
LOOP AT i_header INTO wa_header.
*Separate file per plant
    AT NEW werks.
*Creation of file
      PERFORM sub_create_file.
Open File on the application server for processing
      OPEN DATASET g_file_name FOR APPENDING IN TEXT MODE
      ENCODING DEFAULT.
      IF sy-subrc NE 0.
*Display error message
        MESSAGE e055 WITH g_file_name.         " Error in opening file
      ENDIF.
    ENDAT.
    AT NEW charg.
      CONCATENATE c_header           " Header indentification
                   wa_header-werks    " Plant
                   wa_header-matnr    " Material number
                   wa_header-maktx      " Material description
                   wa_header-charg    " Batch number
                   wa_header-lgort    " Storage location
                   l_clabs            " Valuated stock-unrestricted use
                   l_bdmng            " Requirement quantity
                   l_avqty            " Avalable quantity.
              INTO l_record SEPARATED BY
                   cl_abap_char_utilities=>horizontal_tab.
Transfering header record to file
      TRANSFER l_record TO g_file_name.
      CLEAR: l_clabs,
             l_bdmng,
             l_avqty,
             l_record.
    ENDAT.
    LOOP AT i_mkol INTO wa_mkol WHERE matnr = wa_header-matnr
                                AND   werks = wa_header-werks
                                AND   charg = wa_header-charg
                                AND   lgort = wa_header-lgort.
*Population of Vendor number and consignment stock
      wa_item-lifnr = wa_mkol-lifnr.          "Vendor number
*Storing Consignment stock into local variable to change datatype
*from QUAN to CHAR
      l_slabs = wa_mkol-slabs.
      SHIFT l_slabs LEFT DELETING LEADING space.
      wa_item-slabs = l_slabs.                "Consignment stock
*Population of Vendor name
      READ TABLE i_lfa1 INTO wa_lfa1 WITH KEY lifnr = wa_mkol-lifnr
                                              BINARY SEARCH.
      IF sy-subrc EQ 0.
        wa_item-name1 = wa_lfa1-name1.        "Vendor name
      ENDIF.
    CONCATENATE   c_item           " Item identification
                wa_item-lifnr   " Vendor number
                wa_item-name1   " Vendor name
                l_slabs          " Consignment stock-unrestd. use
           INTO l_record SEPARATED BY
           cl_abap_char_utilities=>horizontal_tab.
*Transfering Item record into file
TRANSFER l_record TO g_file_name.
CLEAR: l_slabs,
         l_record.
    ENDLOOP.
    AT END OF werks.
Close File
      CLOSE DATASET g_file_name.
      CLEAR   g_file_name.
    ENDAT.
ENDLOOP.
ENDFORM.                    " sub_batch_stock

Difference bw open hub destination and info spoke ???

Hi,
what are difference b/w open hub destination and info spoke ???
Thanks In advance.
Regards
Nitin

Hi,
The open hub destination is the object that allows you to distribute data from a BI system to non-SAP data marts, analytical applications, and other applications. It ensures controlled distribution across multiple systems.
The open hub destination defines the target to which the data is transferred.
An InfoSpoke can extract data in two ways:
1.Full mode (F): the data corresponding to the selection criteria of the InfoSpoke is transferred from the data source into the respective destination.
2.Delta mode (D): records that were added since the last extraction only are transferred in this mode. This is only possible for the source objects InfoCube and DataStore object.
See the below Articles:
InfoSpoke: Part -1
www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/g-i/infospoke%20part%201.pdf
Open Hub Destination: Part 1
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%201.pdf
Open Hub Destination: Part 2
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%202.pdf
Thanks
Reddy

Header and trailer pages in report templates

Hi:
I wonder how can i make header and trailer pages in the tamplate reports , so that the objects in the template header & footer report would be inherited to the generated reports. I use Oracle reports 6.0.8 and there is no header section, niether Trailer section in the Template Editor, I've read in the reports online help :"You can use the margin and body of the Header and Trailer sections to create a Header and Trailer page as in earlier releases. In future releases, you will be able to add and delete sections.", is there any method i can use to make header&trailer pages in the template.

I have the same question. This is what I found on Metalink.
goal: How To Define A Header/Trailer Section In A Reports Template Definition File (TDF)
fact: Oracle Reports Developer
fix: It is not possible to have a HEADER/TRAILER section in a Reports Template Definition File (TDF). Templates do not need to have a HEADER/TRAILER section, infact there is no sectioning in a template. They just define the visual layout when applied against a report section.
This did not answer my question!

Generating Header and trailer sections in reports..

Hi all.
I want to generate reports, that has both a header- and a trailer section page.
Usually this was part of the template report, but in Designer 9, the generator first converts the template report (.rdf) to a template report (.tdf), and is then using this template.
But where is the header- and trailer page? You can't see them in the reports builder, when looking at templates, and the generated report does not contain any header- nor trailer pages.
Have I missed something?
Any replies welcome...
Benny Albrechtsen

I have the same question. This is what I found on Metalink.
goal: How To Define A Header/Trailer Section In A Reports Template Definition File (TDF)
fact: Oracle Reports Developer
fix: It is not possible to have a HEADER/TRAILER section in a Reports Template Definition File (TDF). Templates do not need to have a HEADER/TRAILER section, infact there is no sectioning in a template. They just define the visual layout when applied against a report section.
This did not answer my question!

File content conversion - sender adapter for Header and detail records

Hi Experts,
I am receiving a field of fixed length content format.(Header)The first line of the file will follow the structure X having some fields and (DetailRecord)subsequent lines in the file will follow structure Y having somes fields.There is no record identifier for Header and Detail records.In one file first line is Header records and remaining subsequent line is DetailRecord.What are the parameters we have to set for sender file content conversion parameters as i donot have any key field and key field value.And in one file we have only one header records ( first line) and n number of detail records from 2nd line onwards.
Thanks
Deepak

Hi
Refer the below fourm link,
Flat file whitout id
Regards
Ramg.

RESTORE - Kernel   Bad page - header and trailer not matching

Hello,
I have a Problem with the recover of my backup.
When i want to make a restore of the Database this error is shown in Logfile KNLDIAGERR
2008-11-26 21:20:38                               --- Starting GMT 2008-11-26 20:20:38           7.5.0    Build 032-123-111-699
2008-11-26 21:26:57      0xE0C ERR 20005 Kernel   Bad page - header and trailer not matching
2008-11-26 21:26:57      0xE0C ERR 20006 Kernel   Header [ 5277032 - data - tab - checksumData - empty ]
2008-11-26 21:26:57      0xE0C ERR 20007 Kernel   Trailer[ 0 - data - nil - chckNil - empty ]
2008-11-26 21:26:57      0xE0C ERR 52015 RESTORE write/check count mismatch 5277032
2008-11-26 21:26:57      0xDFC ERR 52012 RESTORE error occured, basis_err 300
2008-11-26 21:26:57      0xDFC ERR 51080 SYSERROR -9026 BD Bad datapage
any Help ?
thanks a lot
Steven

Hi Steven,
the database kernel checks with every read the header trailer. If it got a mismatch during read the error message you got is logged.
The same checkes will be executed when you create a backup. You told us that the backup could be executed without any errors and that the system where you created the backup is ok as well -> you executed a Check data?
Now everything looks like the error is in the backup and happened during writies to the external backup medium. Or the backup is ok and then the error happens during read from the external medium.
To get closer to the reason where the problem is located I need to have some more information.
1. You did the restore several times?
2. Did the bad Data Page shappens always on the same page -> Check knldiag.err
3. Did you do your backup on tape?
4. Did you try to create a backup into a file?
5. Does the restore from file got the error as well?
Regards, Christiane Hienger

Open Hub Header and Trailer Record.

Similar Messages

Maybe you are looking for