Open in iBooks does not show up in options for a PDF

I am trying to get a PDF into iBooks on my ipad without syncing to iTunes. I read that when a PDF is opened in email or Safari an "Open in iBooks" option shows up. Under Open in.... I have about 6 options for different Apps but iBooks is not one of them. I do I get iBooks to show up in Open In.........?

It might depend on whether the PDF has got some of digital rights management on it that is not supported by iBooks. I think the limit for the number of apps that appears in the 'open in' menu is 10 apps, so if you've only got 6, and iBooks is installed on your iPad, then it not appearing in the list kind of implies to me that it's not supported. Have you tried resetting your iPad to see if that 'clears' the problem : press and hold both the sleep and home buttons for about 10 seconds after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Similar Messages

  • No Mirroring in Ipad 2? I have IPAD2 and Apple Tv 4.3. I can airplay videos/music from Ipad2 to my HDTV via ATV, but I cant mirror it. When I select airplay to switch from Ipad2 to Apple TV, Mirroring does not show as an option. What am I missing?

    No Mirroring in Ipad 2?
    I have IPAD2 and Apple Tv 4.3. I can airplay videos/music from Ipad2 to my HDTV via ATV, but I cant mirror it. When I select airplay to switch from Ipad2 to Apple TV, Mirroring does not show as an option. What am I missing?

    That feature is not yet available, it is coming with IOS 5
    http://www.apple.com/ca/ios/ios5/features.html

  • Vendor Ref No. does not show in Journal Entry for AP Credit

    AP Invoice journals show the vendor reference number in field Ref 2.  However, when creating an AP Credit memo, the vendor reference number does not show in the journal for the credit memo, instead the field Ref 2 is used for the base document number. 
    I have two clients who have pointed out that they would expect to see the vendor ref number in the Ref 2 field in the journal when an AP Credit is created, as this is the functionality for Goods Receipts and AP Invoices.   
    Both clients are currently manually updating the Ref 2 field in the journal for AP Credit, so that in the BP account transactions view they can sort field Ref2 by vendor reference number.
    Does anyone have any suggestions on a work around for this?
    Thanks,
    Lianne Plant

    Hi Lianne Plant,
    You may check: Journal Ref2 field : AP credit note
    Thanks,
    Gordon

  • Reader 9.3.2 does not remember last page visited for scanned pdfs

    Using an old school PPC Mac, OSX 10.4.11.  Reader 9.3.2 does not remember last page visited for scanned pdfs. It only remembers the last page visited for searchable pdfs, but not for scanned.  I have the box checked in "Preferences: Restore last view settings..."  I cannot upgrade Reader on this system, or my OS, so I'm stuck using what I have for now. I have to read huge documents for my work, that will include hand written notes in the margin and other marks on the page. The documents are hundreds of pages long, so it's a bit frustrating that it can't remember the page number for this type.
    Are there any fixes for this? Something else I can try?

    I tried to find the download for 9.5.5, but my OS is not in the list. I'm on a non-intel PPC mac. I tried finding that version on the web, but most of the links lead me back to Adobe, where it doesn't seem to want to be found. It obviously exists somewhere, but Adobe isn't making it easy to access!

  • Why do I not get the checkout option for a pdf type document when clicking on the document link in the SharePoint workflow task?

    We are trying to use workflows to review and edit pdf files in sharepoint 2010. We are having a couple of issues and am hoping someone has the answer.....
    1)  When myself and coworkers click on the pdf document in the library, we get the check out option as expected.  However when we click on the document
    link in a workflow task (on the sharepoint site), the pdf opens as a temporary file and we do not get the check out option.  Why does this happen????? 
    2)  The same thing happens when we click on the document link in the workflow task email;   HOWEVER,  one of our co-workers does get the
    check out option when clicking on the link in the email task.  Why would she get the checkout option using the email and not when clicking on the link in the task list on the sharepoint site ????  We have compared our internet settings and adobe
    settings to ours and found no differences.
    We are using Sharepoint 2010, Windows 7, IE8, Adobe Reader X or XI.  Some of us have Adobe Pro X and have the same issues.

    Hi,
    According to your post, my understanding is that you could not get the checkout option for a pdf type document when clicking on the document link in the SharePoint workflow task.
    I try to reproduce the issue, however, no matter when I click the pdf type document in the library or click on the pdf document link in the workflow task email, it download the pdf doucment and then I can open it.
    It will be better if you can descript how you
    get the check out option as expected when you click on the pdf document in the library.
    Then I upload a
    word type document to the library, no matter when I click the word type document in the library or click on the word document link in the workflow task email, I can open the word document directly and get the check out option as expected.
    I recommend to use the other type docuemts to check whether the check out option works.
    Thank you for your understanding.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Open/Save Dialog does not show new files?

    Say you are working on a logic file in a folder and you have
    a few audio and movie files in that folder, and you launch
    Logic and via the open/save dialog window you add a few
    files to your song and in that dialog window you can see
    all the files in that folder.
    Then, in the Finder you add a few more files and movies to
    that folder and again use the open/save dialog window to
    add more files BUT the new files you added since launching
    logic are NOT SHOWN in the dialog window ! ?
    What's the deal with that?
    Every other app can show files added since the launch of the
    application, why not Logic?
    PowerBook G4 1GHz   Mac OS X (10.3.9)  

    project manager
    um, yeah.
    Should not need the project manager simply to see new files added to a directory in a Open/Save dialog window since last opening the app.
    I did a scan, a extended scan, opened all the little turn down arrows of the
    full path to the directory I knew there to be the new files and yes, Logic
    shows them there in the "Project manager".
    BUT Logic still does not show the files in the Open/Save dialog windows.
    This is strange because even simple app like TextEdit can show
    new files in it's Open/Save dialog function windows without the need of
    a project manager.
    I have to quit and re-launch each time to see any new files?

  • PDF document opened with Preview does not show french accents

    Hi everybody,
    I've got some issues with PDF documents opened with Preview.
    They show a blank space for all the accented vowels.
    If I open the same document with Safari, it's the same. But with Chrome, it works perfectly.
    I assume there's a problem with fonts, but, nothing wrong with fontbook (checked duplicates for instance).
    Last information : it looks ok within chrome on my Imac, but the issue comes back when I try to print from chrome app...the accents are gone on the sheet.
    Any idea ? I don't want to install Adobe reader...
    Thanks for your help !
    http://www.art-shots.net/

    I don't want to install Adobe reader...
    Why not?  It can handle some pdf's that Preview can't.  At least it's worth a try.
    In case you change you mind get it from here.

  • Itunes 10.2.1 does not show remote speakers option

    I have been having a strange issue on one of my laptops. I have two laptops - one with Windows 7 64bit and Windows XP 32 bit. On both laptops, I was able to connect to the airport express to stream music to my home theater (receiver) till a few months back. Both have the latest version of Itunes - 10.2.1. Now, the Windows 7 laptop continues to work fine but the Windows XP laptop is having problems. *Itunes does not show the remote speaker option. The airport utility does not recognize the airport express.* In the Windows Firewall exceptions, there are entries for Bonjour (port 5353 UDP), Bonjour Service (mDNSresponder.exe) and Itunes.exe and all are checked. Even if I disable firewall, it does not resolve anything.
    The airport express is connected through an ethernet cable to the Belkin Wireless N router. The wireless mode for the airport express is switched off. The firmware on the airport express is version 6.3.
    Few differences between the two laptops
    Windows XP: I use a Belking Wireless N Notebook card to connect to the Belkin Wireless N Router. Antivirus is "McAfee VirusScan Enterprise + Antispyware Enterprise 8.7.0i"
    Windows 7: I use the inbuilt wireless to connect to the same router. Antivirus is "ESET Smart Security 4.0"
    Can someone help? I have researched the forum and tried the following things but still does not help.
    1. Tried uninstalling Itunes and Airport Utility and reinstalling
    2. Tried disabling Windows Firewall

    I solved my problem I tried several other programs to play my music and since nothing seemed to work, i started deleting other software from my computer and apparently Uniblue's RegistryBooster was the one that caused the problem. Now able to enjoy music from my computer again

  • TS1363 my iphone does not show up in itunes for me to sync

    My iPhone 5 does not show up in iTunes so that I can sync it.  I have Windows 8.1.

    Try this
    Go into the control panel, programs, add/remove programs
    Uninstall iTunes, Apple Mobile Device Service, Apple Application supprt
    Then go to apple.com and redownload iTunes and reinstall it and try again.
    It shouldn't affect your content at all (didn't mine) but may help with iTunes seeing your device.

  • When trying to set up syn with outlook 2010 - it does not show as an option

    When trying to set up syn with outlook 2010 - outlook it does not show as an option

    Hi smrkevin,
    Welcome to the BlackBerry Support Community.
    What version of BlackBerry Desktop Software do you have installed? If you do not have the latest version listed here: http://bbry.lv/ds97JW I would advise upgrading it.
    If you already have the latest version of Desktop Software, can you verify if you are running a Click to Run installation of Outlook? You can check this in Outlook -> Help -> About Microsoft Outlook. If you are using a Click to Run installation, you will need to install a full version of Microsoft Outlook to setup synchronization. For more information, see: http://bbry.lv/qDIoXO
    Hope this helps.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Video preview does not show a quicktime option

    My main videos are going to YouTube and I would like my preview in Premiere Pro CC to be quicktime so I can edit correctly to the format.  Under New Sequence Settings it does not give me that option.  Is there something I need to manually install?

    What platform are you on? QuickTime is available as the Preview File Format [PFF] only on Mac.
    In general, the PFF is not critical the final encoded output, but there are a couple exceptions. So I'm interested curious about why you feel it's important to have the PFF match your eventual export format.
    Also, my understanding is that the preferred format for YouTube is h.264, not QuickTime. I haven't studied YouTube's recommendations/requirements, but I know for a fact that the format for all YouTube presets is h.264.

  • Ringtones not showing up as options for all functions?

    I made four ringtones for my new iPhone 5 that I purchased on Saturday. They all show up as options for my calls ringtone, but for the others (texting, voicemail, etc) only one of the four that I made is show as an option. What can I do to fix this?

    I have had the same problem as well. I have been trying since last night to make/purchase ringtones, but when I click "Buy" nothing happens. Anyone find some way to fix this?

  • Open with menu does not show pages

    When i download email with a pdf attachment, i want to open it in pages. The open with dropdown has 8 choices, but does not include Pages? How do
    I edit what appears in this drop down?

    Pages does not open .PDF files. TO do so you will need iBooks which is an Apple app that is free in the app store.
    Good Luck !

  • Print Dialogue does not show print quality options on MacBook

    I am trying to print wirelessly from my Macbook Pro to a HP 5500 connected to G5. I can print no problems, but I can't control the print quality as this option does not appear in the print dialogue box.
    When I print the same page from my G4 powerbook I get print quality options in the dialogue. Both laptops are running 10.4.8 and connecting wirelessly by an airport network. The printer is plugged in the G5 not an airport express.

    Hi there,
    As Scapesuiter has mentioned, it would be best to check the HP web site to see if there is a Universal driver for your printer. These are drivers that have been written to work on the new Intel Mac's and on the previous Power PC (PPC) Mac's.
    If there isn't a Universal driver, you can still use the older PPC driver, however you will experience problems like you are getting when printing from a Universal application via a PPC driver. Usually you see a line through the option that is not available, but I guess another symptom could be that the option is not viewable. Anyway, for some Universal applications, you can choose to open them using the Rosetta emulator. With the application closed, select its icon in the Finder and do a Get Info (Cmd - I). In the window that appears there may be the option "Open using Rosetta". If there is, select this option, close the window and open the application. Now try to print and see if the option is present.
    Regards,
    Paul

  • I keep getting the an Alexa Sparky pop-up each time I open Firefox, it does not provide a "no" option... how can I permanently stop the popup?

    Every time I open Firefox, I get a pop-up asking me to install the Alexa Sparky toolbar--which I do not want. The pop-up box does not offer an option to say "no" or "do not ask me again", which is VERY annoying. How can I permanently stop the popup?

    '''This worked for me:'''
    How to disable extensions, Personas, and plugins
    Disabling an add-on will turn it off without removing it:
    At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP), and then click Add-ons. The Add-ons Manager tab will open.
    In the Add-ons Manager tab, select the Extensions or Appearance or Plugins panel.
    Select the add-on you wish to disable.
    Click the Disable button.
    Click Restart now if it pops up. Your tabs will be saved and restored after the restart.
    To re-enable the add-on, find it in the list of Add-ons and click Enable, then restart Firefox.

Maybe you are looking for