Open item issue and clear item issue in fbl3n

Hi Guys,
relating to Line items are not showing as cleared items and showing as in Open line items of G/L account.
Find the below observations for your reference.
The Document no. 920006532 in Company code 1010 ( IRN ) is shown in the open items list for GL account 292351 but also shown as cleared by Doc. No. 402020795 in the system. But while reviewing the cleared items in FBL3N the items of Doc. No. 402020795 are cleared for Doc No. 909000663 & 909000717 and not for the Doc. No. 920006532. That is the main reason the document line items are shown as open.
Please guide deleted
Regards
Supreme
Moderator: The SDN community would appreciate if you omit word 'immediately' in your requests

1. Only Balances in Local Currency:
Indicates that balances are updated only in local currency when users post items to this account.
Use: You would set this indicator for accounts in which you do not want the system to update transaction figures separately by currency.
It is required to set theis indicator in:
1. cash discount clearing accounts
2. GR/IR clearing accounts.
It cannot be set in reconciliation accounts for customers or vendors. Setting it in all other instances is optional.
Open item management:
Determines that open items are managed for this account.
Explanation: Items posted to accounts managed on an open item basis are marked as open or cleared. The balance of these accounts is always equal to the balance of the open items.
Procedure: Set up accounts with open item management if offsetting entries are to be assigned to the postings made to these accounts. Postings to these accounts represent incomplete transactions.
USE:
A goods receipt/invoice receipt (GR/IR) clearing account should be managed on an open item basis so that you can check at any time whether invoices have been received for the goods received for an order.
Set up accounts without open item management if no offsetting entry is to be made against a posting to this account.
Accounts that are managed on an open item basis include:
Clearing accounts:
Bank clearing account
Payroll clearing account
Cash discount clearing account
GR/IR clearing account
Accounts that are not managed on an open item basis:
Bank accounts
Tax accounts
Raw material accounts
Reconciliation accounts
Hope this is helpful. Pleas assign points if it is.
Julia

Similar Messages

Extraction of the open items(TC FPBW) and clear items in FI-CA(TC FPCIBW)

Dear experts,
I have a question regarding as the transaction FPBW and FPCIBW .
What i know is that these transactions tranfer the open item and clear item information from the table DFKKKO to table DFKKOPBW and DFKKCIBW.
But I would like to know whether there are some filters when these transaction SAP transfer the table from DFKKKO.
As we are adding a new document type (DFKKKO -> BLART) in the FI-CA system, I wonder whether they would be also transferted by the transaction.
Thanks in advance.

Hi,
How you resolved this issue?
If you are having the solution for this please share with me as well.
and one more thing, how can we schedule these two jobs in background for daily loading the data into DFKKCIBW and DFKKOPBW.
Please share these two things with me.
Thanks in advance.
Srinivas

Open and Cleared Items

Hi all
We are currently busy finalising our FI-CA BW Data Modeling exercise - and in process to complete Dataflow documentation.
We will make use of the standard open and cleared item extractors with enhancements on different levels. Some background on the requirements:
- We will have to extract document types, divisions, dates, clearing reasons, contract account, Business Partner etc.. information to meet the requirements.
- We will have to keep history for at least 26 months to produce the required management reports (very high number of data), and 'partition' the cubes on date level for both Cleared and Open Items.
- Most of the reports display 13 months worth of billing/ payment figures. I.e. the report for the end of October show billings vs. payments for October 2006, September, August, July, ... to October 2005.
- The requirement is that the report figures will not change from one month to the next (i.e. if I run the report for end of October - all figures from October 2006 to Oct 2005 will remain the same when I run the report for end of November). I.e. if reversals, transfers, returns etc. occur - these will be picked up in later months.
- For the above requirement, we are looking at extracting open (end of month) and cleared items (for the specific monthly interval) on a monthly basis, and appending the data in the cubes. We will then always base the June figure in the report on the June month extraction (LAUFD/ LAUFI fields) and we will pick up any movement in the next month/s - i.e. July.
Has anyone had these types of requirements before - to report on billings vs. payments, and report on history as described above. We would appreciate it if you could share your report requirements, and also design documents, especially the DataFlow documentation that we can look at as input to our design.

We had a requirement to retrieve "aging of receiveables" by customer. Basically, it goes thru each record and depending on the due date places the amounts in the following buckets (example). 0-30 day Overdue, 31-60 days Overdue, 61-90 days overdue, 30+ days overdue, 60+ days overdue) etc all the way to 6+ years overdue.
There are also cooresponding buckets for coming due analysis. For example, what is: 0-30 days coming due, 31-60 days coming due, 30+ days coming due, etc...
To do this, first I needed to be able be able to produce an open items statement at any given time in the past. Now, this seems impossible because of how the items go from open to cleared all the time. And an item that was open one month ago, may not be open anymore.
What I did was first remove any selections on item status. Then compare the posting date with teh key date in the past, if the posting date is less than or equal to the key date, keep the record.
Then compare the clearing date with the key date. First, keep all that are #. (This keeps all records still open from that posting date/key date)
Then, add another check for all items that were cleared after the key date (GT Key Date). This gives you the open items on that date.
Hope that makes sense. Let me know if you want clarification.
/smw

Doubt about report FBL5N of screen field:Open items and Cleared items

hi
i know the report FBL5N is use DDF LDB and the report work flow is BSID->BKFP->BSEG
but i don't know to differentiate Open Items and Cleared items in this report.
Open items and Cleared items stand for a field flag in these table (BSID,BKFP,BSEG )? if true the field is?
or they must be calc in program ? if true what about calc rules?
waiting for help! thank you!

Hi,
Here is the difference in Open Items and Cleared Items.
In FI first the document is Open (when it is posted) so the entry is made in table BSID. Once the document is cleared, it will move from BSID to BSAD. And for Cleared item you will see Clearing Document no and Clearing date values updated (these are blank when the item is open).
The only difference in Open and Cleared is via Clearing Document and Clearing Date. If the values are present, it means document is cleared.
Hope this helps.
ashish
Message was edited by:
Ashish Gundawar

Interest calculation on Open items and cleared items

Dear Experts
I am trying to do needful configuration for interest indicator on which interest can be calculated for open items and cleared items as well. But, system is calculating interest for open items properly, but not calculating interest on cleared items with same interest indicator, I am repeatedly getting error "interest calculation indicator is not compatible with this type of interest calculation"
Is it possible to use same interest indicator for open line items and cleared line items of customer?
If possible, request you share the needful config steps to do same.
points will be awarded for usful reply.
Best regards,
S. Habib Pasha.

Hello Habib,
depending on the requests you can setup a item interest calculation or a balance interest calculation "Define calculation types".
IIC: check settings (item selection, all cleared items, only items with payment, no cleared items) "Prepare item interest calculation"
I guess you have setup the item interest calculation - maybe you have mixed some entries with BAIC.
Check in "Prepare account balance interest calculation" whether you have entries with the indicator you want to use.
At least check your entries in "Define time-based Terms" If you have entries with Balance account interest calculation the system gives even an error.
Hope this is helpfull.
Best regards
Horst

Open items date and clearing date

Hi,
Could any one tell me what are the field names in BSEG table for the "open items date" and "clearing date"?
thank u
Kaki

You should better analyze open items via secondary index tables (BSID for customers, BSIK for vendors, and BSIS for G/L accounts with open items), it would be more efficient. Those tables by design contain actual open items only.
Anyway if you have to select open items via BSEG then you should select those which have AUGBL and AUGDT fields cleared.
Another option is to use some LDB (Logical DataBase) - KDF or DDF.

Few customer invoices are appearing in open as well as cleared items.

when I am running FBL5N for a particular customer, few line items are coming as open as well as cleared items.
Please suggest how to overcome from this.
Thanks.

Hi
Once it cleared, then it will not appear in open item. This will happen only for partial payment even though we cleared. For that particular invoice, we done partially 2,3 times and cleared, in that payment doc any one doc containing future date. So that you should give the date which having future date in fbl5n.
For example: Invoice date 10.12.2011, payment done(posting date) 11.12.2011,12.12.2011,.....20.12.2011
But whenever checking in fbl5n, we always check with current date. Invoice is cleared. so that it will show cleared item, but according the current date its open only. So that it will show open item also. If you are changing into final date with reference of payment doc, then it will not appear in open item
Regards
Mani.S

Line item number and ledger item number posted differently

Hi Friends ,
I have a BAPI for posting the documents in SAP from another system.This BAPI is using the standard BAPI - 'BAPI_ACC_DOCUMENT_POST' to post the documents.But when I post the document using this BAPI the line item number and ledger item number in the document are posted differently. ie . for line item no 1 ledger item is 24 .But when I am posting it directly it is same ie for line item no 1 ledger item no is also 1.Lot of other programs in our R/3 system is dependent in this logic.What could be the parameters in BAPI that could affect line item and ledager item ? Can anybody help me in finding out the reason for this ?
Thanks in advance ,
Joby

Hi ,
Anybody can help me on this issue ?
Thanks in advance ,
Joby

How To Get Deleted Item Count and Associated Item Count And LastLogOn and LogOff Time For A Mailbox In Exchange Using EWS

Using Powershell cmdlet i get all the details..But i want to get these Details by using EWS Managed Api.Is It Possible to do???
Powershell Cmdlet,
Get-MailboxStatistics -Identity Username, Using this cmdlets all the details will get displayed.
DeletedItemCount:5 //Here how this count comes.In My OutlookWebApp the deleteditems folder contains 13 items in it..But the count shows only 5.
TotalDeletedItemSize:5.465 Kb//Even this value too does not match with DeletedItems Folder size in owa.
AssociatedItemCount:12
LastLogOnTime:11/11/11 12:43PM
LastLogOff Time:11/11/11 2:43PM
In EWS,
By Looping through all folders i can get the total item count and total item size.Even i can get deleteditems count .But that value does not match With the powershell value.Even the TotalDeletedItemSize
Doesnt match.
Using EWS Managed Api ,Looping through folders i can get ItemCount,TotalitemSize,(DeletedItems,TotalDeleteditemSize(These TwoValues Does not match with values comes from powershell))
Now how to get the Associated item count and lastlogoff and logon time using EWS managed Api.Is it Possible???
And even y the deleteditems count and size values varies between EWS and powershell.

What happens if you execute the below code?
Get-MailboxFolderStatistics [email protected] | where {$_.FolderPath -like "/Deleted Items"}
Refer this blog. You may get some dice
http://exchangepedia.com/blog/2008/09/configuring-deleted-item-retention.html
Regards Chen V [MCTS SharePoint 2010]

Urgent what is the programs to delete work item history and work item

hi gurus this is very urgent ,
what is the programs to delete work item history and work item ?

Hi Deppak.
There is a program ,to delete an workitem and history
RSWWHIDE---Program to delete the history.
RSWWWIDE--- Program to delete an workitem.

FBL3N-cleared item visible in both open item and cleared item.

Hi
We have posted a line item to Bank clearing account-open item.
                        XXXX a/c
                             To bank clearing account
Then we posted another entry of reconciliation
                     Bank clearing account
                           To main bank
The we went to f-03 and cleared the bank clearing account.
However i could still see both the entries in open item in fbl3n and also in cleared items.How this be possible when the accounts are cleared i could see it in open item too.Please suggest.

Hi,
One more reason for this is that you have posted ur bank reconsilation entry in the future date.
See by default SAP will always derives current date to your FBL3N selection screen in the open item key date field, so when you pass ur recon entry at a future date, system will show this line items as open items as on current date.
check the open items by removing date in the key date field in FBL3N selection screen
Where as cleared item selection there will not be any date derivation by the system, so system considers all the documents irrespective of their posting dates.
Please ask for further issues.
Thanks,
Srinu.

Display between open items and cleared items in FS10N

hello all,
I have the following problem.
When I go with FS10N with double click on the initial balance of an G/L account I get the message:
"A large number of line items were selected
Recommendation: Only display open items
Do you want to display open items only?
Yes or NO?"
If I click yes, I get the open items only and if I click no, I get the cleared items. The strange thing is that I get same line items in both reports. For example, I can see same line item, one time as cleared (when I click no) and one time as open (when I click yes).
Do you know the reason for this? For both reports I click on initial balance, so key date should be 01.01.2009, if I run FS10N for fiscal year 2009. Right?
The user is confused in this situation because he is not sure if the item is cleared or not.
thanks for quick reply!
Daniel Nicula.

If you click yes, you get the open items only , but if I click no, you don't get the cleared items only. With NO, you get ALL items.

Open and cleared items FBL3n

Hi Guys,
I have a query.
In FBL3n for G/L line item display , we select open items or cleared items on a particular date.
What is the meaning of this? open in what sense? cleared in what sense?
thanks..
srikanth

Hi,
You can set up accounts with open item management if offsetting entries are to be assigned to the postings made to these accounts. Postings to these accounts represent incomplete transactions.
Example:
A goods receipt/invoice receipt (GR/IR) clearing account should be managed on an open item basis so that you can check at any time whether invoices have been received for the goods received for an order.
Items posted to accounts managed on an open item basis are marked as open or cleared. The balance of these accounts is always equal to the balance of the open items.
You can say that open items means vendor or customers needs to be paid.
Regards,
Jigar

FI-GL :Balances shows in open item not in cleared item

I have a small question
I make provision in F-02Document .In I F-07 for payment with clearing . Here I used method is partial payment method.
Actually at the last payment we have to done standard then only it will show in cleared item .But I forgot to use standard payment I used partial only .So the item still shows in open item only .Now I want to see this item in cleared item .How can see what steps I have to done for this
Please advise me u2026
Regards
Rajesh

Hi Expert,
With respect to GL Account:
T-Code: F-03 - to Clear the GL Account, if the payment made to the Provision GL Account through the T-Code: F-07.
With respect to Customer:
T-Code: F-32 - to Clear the Customer, If the Payment made through the T-Code: F-28 - Incoming Payments
With respect to Vendor:
T-Code: F-44 - to Clear the Vendor, If the payment made through the T-Code: F-53 - Outgoing Payments.
Regards,
GK
SAP

Report Builder - Last page issue and Report Footer issue

I am using ColdFusion 9 Report Builder, am new to this product and encountering 2 issues.
Issue 1 - I have a field that I would like to print on the last page of my report. How can I determine the last page? I initially tried using a calculated field set to the 'highest' calc.Page_Number. Then I could compare the current page to the last page in the 'Print When' property. But calc.Page_Number can not be used in a definition of a calculated field.
Issue 2 - Depending on the amount of report detail, sometimes my report footer prints alone, without a page header and page footer. The report includes this page in the total number of pages. For example, if it is a 2 page report, the page header on page 1 will display Page 1 of 2. Then the only data on Page 2 is the Report Footer. No page header or page footer prints.
Any assistance on these issues would be most appreciated. To date, using the Report Builder has not been easy.

To issue 1: The report contains a report band called report footer. thsi is always at the last page. The report footer band initially is collapsed, so you have to expand it by dragging the last band divider.
To issue 2: I guess this is a page break calculating error when detail data reaches really near the page footer area.
Try some experiments with different setting of the following properties/issues:
- in elements, e.g. calculating fields in the bands between report detail and page footer: In Properties / Print Control / Printing Options: Activate the option "Remove line when blank". This will remove the whole report band area if this field is blank. May save some empty space.
- try to remove unused empty space between detail rows.
- try to resize and reposition all detail fields so that they snap to the grid.
Best regards

Open item issue and clear item issue in fbl3n

Similar Messages

Maybe you are looking for