Open PO commitment report, for non-account assigned line material.

Hi expert,
Where can i find a report that gives me the open PO commitment, without any account assignment on the PO?
Meaning it is a warehouse material, but at the end of the period, I need to know wha`t is my commitment, and compare that to my budget.
I know I can get this information at the time of goods receipt, but my point is that I haven`t received the goods yet, and need to know what are my commitments.
I hope I was clear.
Thanks
Fotso

Hi Eli,
When i do exactly what you mentioned above, the system just add a new report which is "Range: Actual/Budget/Commitments
", which comes to the tcode.
So the drill-down lead me to the tcode again.
When I pressed "Configure" in the section Report/report interface, I saw there was already the receiver report "Cost Center: Actual Line Items".
So I guess I should add something similar to "Cost Center: Commitment Line Items". How can I do that?
Thank you
Fotso

Similar Messages

GR and GR Non Val indicator in R/3 PO for multiple account assigned SC's

Hi,
We are on SRM 3.0(EBP 4.0) and R/3 4.7.
We have implemented the BBP_CREATE_PO_BACK badi for setting or clearing the GR and IR indicators under certian conditions.
But for Multiple account assigned SC's we get an error message "06181 With non-valuated GR, please also enter GR i ndicator ".
We have tried implementing note# 872000, but this has not solved the issue.
The PO's get created only if we force the GR indicator when transferring the data into R/3.
It seems clear that while creating the PO the system is encountering the GR Non Val indicator but not the GR indicator, so its throwing the error message (we get the same error message when we create the PO from R/3 with GRnon val indicator checked and GR ind unchecked).
The proposed solution is that in the same BADI, along with clearing the GR indicator, we will also clear the GR non val indicator.
This can solve the issue if the indicators are transferred as it is from EBP.
But can anyone tell me if these indicators are also checked/changed in any FM/program in R/3 before the PO is created?
Is there any customizing setting which is affecting this particular behaviour?
Regards,
Srivatsan

Hi Srivatsan ?
In ECC, you have a configuration point :
Materials Management->Account Assignment->Maintain Account Assignment Categories
Here you can untick the indicator you want by account assignment category;
Kind regards,
Yann

STandard Report for GL Account balances

Hi,
I am looking for a standard report for GL Account balances in the following :-
Opening Blanace          Tranasactions during the month                               Closing Balance
                                      Debit                       Credit
REgards,
RAJ

I am looking for LINE ITEM WISE REPORT for GL Accounts in the following format:-
Opening Balance
Transactions during the month (DR and Credit )
Closing Balance
REgards,
Raj

Unable to locate Co data for co account assignment in EK02

Hi,
While creating entries in EK02 we are getting below error:-
"The system was unable to locate CO data for CO account assignment key XXXX". We are using profit center and segment reporting " and have maintained the necessary settings in "Define CO Account Assignment Keys" against company code , segment and profit center and also maintained cost element settings.
Any solution to resolve this error.
Thanks and Regards
Kumar

Hi Kumar,
Below are the configurations required in this regard.
1. maintain GL account and const element - FS00. You can check whether the GL maintained as P/L GL.
2. maintain the cost centre - KS01/02/03. Please verify all the details whether or not have been maintained correctly.
3. maintain EK01 (if required).
4. maintain EK02 - please double check whetheryou have CO account assignment 'X' in there.
5. maintain CO account assignemnt key in SPRO - Check whether correct cost centre is maintained against correct CoCd.
This would suffice.
Please let me know if you're stil facing the issue.
Thanks
Bodhisattwa

GR/IR Rounding Logic for Multiple Account Assignment

We have activated business function LOG_MM_MAA_1 (EHP4 release 604), GR valuated. When choosing Distribution on quantity basis and distribute partial inv proportionally, the MIGO postings are different from the MIRO postings. For example, we have a quantity of 12 that we allocate to two different cost centers 33.3 / 66.7 %. We receive a partial qty of 5. MIGO distributes the quantity 1.665 / 3.335, respectively. However, MIRO distributes the quantity 1.666 / 3.333 respectively. Since MIRO is supposed to accept the MIGO quantities and amounts, why is the percentage allocation different? Is there a way to make the percentages equal for MIGO / MIRO? Modification of the percentage field (VPROZ) in the PO to more than 1 decimal is not an option.
Example
    PO (quantity-based distribution, partial inv is proportional: Receive partial Qty 5 of total 12
                         Net Value            Qty              Percen           MIGO           MIRO
    Item:            9,600.00 USD    12.000 pc     100.00       4,340.00      4,340.00
    Account 1: 3,200.00 USD      4.000 pc        33.3         1,446.67      1,446.96
    Account 2: 6,400.00 USD      8.000 pc        66.7         2,893.33      2,893.04
The small difference of $0.29 for this example is inconsequential, but for larger quantieis it will have a greater impact on the account allocation.

U set or U dont set system will flag the GR non valuated once u assign multiple account assignment.
But SAP is coming up with GR valuated for Multiple account assignment in enhancement package 4.
Check out EP4 Presentation at........
https://websmp210.sap-ag.de/erp-ehp
Venkat

System don`t check an order number for CO account assignment

hi,
I have this problem. When I creta a sales order in CRM and then system creates as a follow up document a sales order in SD system don`t check an order number for CO account assignment. If I want to create a sales order not as a follow up document, but directly in transaction VA01 and I use exactly the same data system gives me a message " The CO account assignment object belongs to company code X, not Y
You want to make a posting in company code Y.
At the same time, a CO account assignment object was specified that is assigned to company code X.
This is account assignment object with object type ORD, and object key 1xxxxxxxxxxx...".
My question is why system don`t check order number when a sales order in SD is created as a follow up document and what should I do to correct this.
Regards,
Mateusz

Check note
a) 352261 or
b) 557562
thanks
G. Lakshmipathi

Cost Distribution in Shopping Cart for different account assignment type

Hi friends,
We are at SRM Server 5.5 at level SAPKIBKT07. Business scenario is extended classic.
User is creating a shopping cart with single line item and distributing the cost to multiple account assignments (say Cost Center and Order). Shopping cart has a valid source of supply. System creates a PO in SRM and tryu2019s to replicate the PO in ECC backend, however fails to replicate.
My understanding is that in ECC backend it is not possible to combine two different account assignments while distributing cost at item details.
Solution would be to create separate line items for different account assignments (distribute between similar account assignments).
Is my understanding right?
Thanking you in advance,
Sandeep

Sreedhar,
Thanks for your update.
I am also MM consultant, so as far as MM goes we can only maintain one account assignment type per line item. In MM we have provision of multiple account assignment but it works only for single account assignment type per line item. Which means if account assignment is "k" then we can split between multiple cost centers, but we cannot split between cost center and WBS element in one line item.
You said it is possible to split between multiple account assignments in one line item. Will it be possible for you to try at your end and let me know how PO/PR are created in backend?
Sandeep

In private browsing not working in Firefox 3.6.12 If I open yahoomail one session for one account and if I open other session for yahoomail, it automatically opens the earlier mail account.

In private browsing not working in Firefox 3.6.12 If I open yahoomail one session for one account and if I open other session for yahoomail, it automatically opens the earlier mail account. But if I want to use more than one yahoomail accounts, in private browsing is not working. Please suggest.

That problem isn't related to Private Browsing specifically, that's how Firefox works with regards to multiple "sessions" with the same server - only one logon is allowed at any time. Try using one of these extensions to be able to run multiple session cookies.
Multifox: 
http://br.mozdev.org/multifox/ 
Cookie Swap extension: 
https://addons.mozilla.org/firefox/3255/ 
Cookie Pie extension: 
http://www.nektra.com/oss/firefox/extensions/cookiepie/

Does Solution Manager support Service Report for non-abap?

Does Solution Manager support Service Report for non-abap?
We can schedule and view reports for ABAP but for all the non-ABAP such as J2EE stack (PORTAL) we can not pull out a report.
If the answer is yes please let me know where I can get the documentation of how to setup SLA for PORTAL or non-ABAP.
I found a document on EWA non-abap but non for SLA.

Hi
actually i am in task of setting up ewa for portal.
i had already done with abap components (ewa and sla)
i stronly believe one of the pre-requiste to get sla is EWA.
so i think if u can setup ewa for portal then you can get sla too.
Regards,
Vijay.

Commitment report for limit order - by period

I am not sure whether this query should falls under this category or Finance. So, please let me know if you think that this question should be moved to the Finance section.
Anyway, my query is I have created a limit/framework purchase order from period 01.10.2008 to 31.11.2008. The delivery date is set to 01.10.2008 by default by the system. When I run the cost center commitment report for period 01.10.2008 to 31.11.2008, I can see the commitments for this PO. However, if I change the period to be from 01.11.208 to 31.11.2008, the commitments are no longer shown on the report. It seems that the system is using the delivery date as the date to show the commitments. Is it correct to say that this is standard behavior? Is there a way to show the commitments running through the validity period set in the PO rather than by the delivery date? Anyone has other options relating to this?
Interested to hear your comments on this.
Cheers!
SF

hi,
As per my knowledge the delivery date shown by the system comes from the planned delivery date entered at the material master record...You can check the MMR in MM03...
Pls check ....this would be the one reason...
hope it helps..
Regards
Priyanka.P

EWA report for non-abap systems

Hi Gurus,
Good day.
I would like to ask, what are the steps that I'm going to do when configuring an EWA report for non-abap systems i.e portal. Do Ineed to install SMD agents on my non-abap systems and connect to diagnostic agent of solman?
Or do I need to install wily introscope agents on my non-abap systems and connect to diagnostic agent?
It is both? Which one?
It would be also great if you can provide me links/documents in relation to my queries.
Please do note that the current version of solman system is 7.1
Thanks in advance for the help
Virgilio

Hi Virgilio,
To generate an EWA report for Java stack system,
you need to do following:
1. install smd agent (diagnostics agent) on Java stack system
you can install this agent standalone, details see note 1234384.
The installation Guide is also attached in note 1234384.
2. finish Initial Config and Basic Configuration in solman_setup for
solman system, the setting about Enterprise Manager is also included
in these configurations, please ensure EM is running properly.
3. start managed system configuration for the EP system in solman_setup
after selecting the system type 'Java', please finish all steps as
suggested in which step. The Step 'Wily Introscope Configuration' is to
install Introscope Agent which is used for Java stack system. More infor
please read the installation Guide of Enterprise Manager and note
797147.
4. You should be able to see data in Wily Introscope and Workload
analysis via
Root Cause Analysis->End-to-End Analysis->select the system->Workload
Analysis
5. If the EP system is added in a solution, the EWA task for this system
should be shown up in solman's SDCCN.
Also check note: 976054"
Thanks
Regards,
Vikram

LinkTax Code for particular Account Assignment

Hi Gurus,
Does anybody knows if is possible assign a particular Tax Code, depending on which account assignment I selected?
For Example, if I select Account Assignment A, the system assign Tax Code I1.
if I select Account Assignment K, the system assign Tax Code E1.
I really apprecciate your help.
Regards,
Hector.

HI
have you assigned the tax codes for your country, i mean go to SPRO - fianancial accountingnew- financial accounting global settings-taxes on sales and purchases and check tax codes for sales and purchases it will be specific for your country and assign tax codes.
then go to the tab posting and there you can assign the tax codes for your account assignment category. this is done with respect to the chart of accounts.
hope this helps.
Regards
Vignesh

My friend give me his apple id that i use to download apps and then i change its email add name and address.. now i update my iphone ios then now its asking for i cloud id and password but when i open the email add for that account its been dissabled beca

my friend give me his apple id that i use to download apps and then i change its email add name and address.. now i update my iphone ios then now its asking for i cloud id and password but when i open the email add for that account its been dissabled because its been long time not used... what can i do to activate my iphone???
iPhone 4, iOS 7.1

Call Apple and ask for Account Security.

Standard report for Reconciliation report for Asset Accounting and GL

is ther any standard report for Reconciliation report for Asset Accounting and GL

hi
functional specification r reqired for this issue
regards
venkataswamy

PO with hundreds of multiple account assignment lines on service line level

Hi, experts,
I want to create a external service PO with multiple account assignment.
However, in the service line item level, when I click on the multiple account assignment, I could only enter 97 lines. But I need to create around 1000 account assignment lines for a single service line.
Is it possible to extend the no. of account assignment lines inside the service line level? May I know how to do so?
Thanks & regards,
James

I'm facing a similar error.
What I think it's happening is that for technical reasons the program involved only delivers 99 line items... To make things worse, When you try to create an invoice for that full item you are going to get an error bc the invoice reserves line 99 for unplanned account assignments.
The suggestion from SAP is to create further items with 98 account assignment items or less.
Have a look at these notes: 486808, 651784
Regards,
Nelson
PS: Please rewards points for helpful answers

Open PO commitment report, for non-account assigned line material.

Similar Messages

Maybe you are looking for