Open transport request in Development server which is not moved to Producti

HI All,
I am doing upgrade from ECC5.0 to ECC6. EHP4.
We have some open Transport request in development server which are not moved to PRD.
Now client wants to stabilize their both the systems, want to compare each trasport in PRD.
My question is, if they dont want that request to move to PRD, what we have to do?
We have to delete the tranport and select the active version of tranport which is there in PRD or how.
Please suggest me how to proceed for this scenario. we have lot of transports. ( Tables,programs,classes,methods,etc.,)
Regards,
sarath

Hello Sarath,
1st question: did you already finish your upgrade? If not, at which phase is it at?
2nd: did you upgrade your DEV system already to the same level as PRD?
3rd: were these transports generated in an old version (like ECC 5.0)? If yes, and now you have an ECC 6.0 system, you must not import them on this system, as they have different versions. If you do it, you'll make your system inconsistent.
Please clarify on these points so we can help you.
Best regards,
Tomas Black

Similar Messages

How to retrieve the Sapscript layout changes for a particular Transport request in development server after this Transport request so many requests created ?

Dear Abapers,
I request the Abapers kindly reply for this blog
I want to retrieve the sapscript layout changes for a particular transport request in development server after that many transport request created and moved to quality ?
I checked in SE03 transaction the transport request was there. But I want to retrieve the existing transport request which is not moved to Quality?
Is it possible to retrieve the existing transport request in development which is not moved to quality ?
Like how we retrieving the programs using versions in development server, In the same way I want to retrieve the sapscript layout in development server ?
Thanks & Regards
Muzeebur Rahiman.S

Hi,
There is no version management for SapScript or Smartforms .
When you write "transport request in development which is not moved to quality" - was the transport ever released and exported from the development system? If yes, and if the "Transport files" are still available in "Transport directory" (or if the transport files were backed up and could be retrieved), the transport could be imported again. If the TR was not exported, you are out of luck, I believe...
I would not recommend you do it on your own even if you happen to have enough authorizations (consult with Basis and/or Transport Admin, if you have one in your organization). I would not recommend that it's imported on a development system or QA system, even if the transport contains no other objects - only the SapScript form in question. Import it on a "sand-box" that gets overwritten by system copy from time to time... Once the transport is imported, you should have the old version of SapScript in that system and could analyse the changes and perform manual merge.
cheers
Jānis

Transporting requests from development server to production server

Hi gurus,
can anyone tell me how to transport requests from development server to production server.

You can use SAPGUI now instead of calling tp at OS level.
Serious: Totally wrong forum!

Import back the transport request to Development Server

Hi All,
I need to import back the Transport request which is in Quality Server to Development Server.
For ex: DEV900764 from Quality to Development Server.
But the same(DEV900764 ) transport request is available in Development also.
How to overwrite the transport request which in Development server ?
I deleted the request in se01, stms in DEV server.
Once i updated the copy of Quality to Development in co-file,data file in OS level. But still it show the old one(DEV copy) while importing thro' stms in development server.
How to solve this ?
actually i need the data of quality transport request

Hi Milan,
Even though you have deleted the request in Development system and later copy the co-file and data file from Quality to Development it will be the same. What is the reason of transporting from Quality to Development.
Normally requests will move from Development to Quality and to production as you already know. Once the request is released from development and transported to next systems that request will have same data in the request what it was at the time it was released and whenever you re-transport that request it will have same changes.
Why you want to do from Quality to development. If you find any differences in the changes of quality and development then some one might have done the chages directly in quailty with client being opened. If it is the same case then you need to take care of the system and avoid any direct changes. If as per my assumption if really there is any difference then make the necessary changes directly in development instead of wanting to transport from Quality.
Transporting from Quality to development is not good practise.....
Regards,
Sharath

How to transport requests from development to production server

hi gurus
i am new to SDN
can u pls give me detailed information how to transport requests from development server to production server?if possible give me screen shot documents
regards
surya

Hi
Transporting
There are help pages that discuss creation of transports.
In simple terms, you: create a transport package
add objects to the package export the package, plus optionally any related objects to a predefined folder/directory on the portal server into a file with an extension of .EPA copy the .EPA file to the import folder of your QA system and import it test the contents on the QA system copy the .EPA file to the import folder of your production system and import it Create a transport package file
Here is the step by step procedure to create a transport package:
For Export
1. Go to system administration, and click on transport?export.
2. In the middle pane, select the folder you want to export and right click on the Transport Package. 3. Fill in the General Properties i.e the name of the package, id and description. 4. And say finish and open the object for editing.
5. When the object has been opened then right click on the object you want to transport, and say "Add object to the Transport Package".
6. Check the checkbox of the item u have added and see the properties if it has been added properly. 7. Now click on the save button.
8. After the object is saved, click on the export button. 9. U will have an option to select where to store the .epa file which will be generated. U can overwrite an existing one by selecting the browse button, or store it with the generated name in the location it automatically generates. 10. Now Click on the Start Export button.
11. once the export is completed, it shows a report on how much time is taken to generate the .epa file. 12. Here there is an option for downloading the .epa file. Click on the link and download the file. This file is ready to be uploaded into any other EP Server.
For Import:
Pre-requisites: You have to copy the .epa file created while export into the local drive. Optionally, you have to manually copy the .epa file generated in the export function into the Import directory of the server ie. chooseFollow the steps below for importing a certain file. 1. Go to System Administration in the portal, and click on Transport?Import. 2. For the source of the package, Click on the radio button Server for the .epa file you have copied lately. Else, click on the radio button on client if you are operating in the client and select the .epa file you have stored on the local drive. 3. Now select the file from the browse option and click on Upload.
4. Now click on the import button. 5. Once the import process is finished, the report is shown. In the whole process, the par files are not included in the .epa files. For the par files to be included into the .epa files then we have to change the pcdStartup.properties file in the server. The property to be changed is Pcd.TransportApplication.Export.ExcludeObjectTypesAfterRuleProcessing: Keep this property's value as empty for enabling the par files to be uploaded into the .epa. You can check for this property in the portal in the following -System Administration-Support-Portal Content Directory-PCD Configuration.

Transport request from development system to testing system

Hi,
I have collected necessary objects in (development) the transport request except 0DUNN_AREA infoObject .Because info object 0COMP_CODE is compounded with Info object 0DUNN_AREA and 0COMP_CODE is in revised version in development system (But available in active version in testing). Suppose I release that transport request from development system to testing system it get overwrite 0COMP_CODE in testing system?
Thanks

Hi Jk,
Depending the same technical names it will get overwrite in the testing server. But if the object 0DUNN_AREA is necessary in any objects which u have collected then u havce to collect it in the rtequest or else u will get RC8.
Khaja

Error while Releasing Requests in Development Server

Dear all,
While I am releasing request in development server, i m getting following error message, so i could not able to release request.
Message : Test Call of transport control program (tp) ended with return code 0208.
pls , give any good suggestion.
Thanks & Regards,
Sandip Sonar.

Hi,
This is purely basis issue, you have nothing to do with it.
Forward the same screen shot to your basis people,they will take care.
This happens when some problem in transport layer between servers.

How to create a request in Development server?

Hi BW Experts, good afternoon.
   Please can anyone tell me, how to create a request in Development server.
     Thanks in advance
   Regards
Anjali

Hi Oscar ,
Thanks for the reply.
My question is.
0BATCH is a field in both R/3 and BW.
so it allows only UPPER CASE letters.
Unfortunately some records are in LOWER CASE.
So i got a error in BW side when loading data from R/3 to BW.
so i want to change that field properties .
I have to create one request on 0BATCH field and send it to BASIS team.
Give me reply .
     Thanks
              Anjali

How can I import a change request to a system which is not in the domain

how can I import a change request into a system which is not part of the transport domain?

Hi,
You can transport any requests to any systems even though they are not in the transport domain.
1) Move the corresponding data & cofiles( in /usr/sap/trans/data & /usr/sap/trans/cofiles directories) to the same location in the target system.
2)Add the request to the queue from STMS ->Import Queue ->Extras ->Other Requests - >Add.
3)The execute the transport as usual.
Regards,
Sam

I got rid of my iphone. With my new phone which is not an apple product. I am not able to open my emails on my icloud account.

I got rid of my iphone and got new phone which is not an apple product. I am not able to open my emails on my icloud account anymore. What is wrong?

Try using these settings: http://support.apple.com/kb/HT4864.

HT201269 Hi, I have just changed contract and phone and wish to transfer the content of my iphone 4 to my new phone device which is not and I-product. When I attempt to sign into i-tune to transfer the item to dropbox, i am unable to sign into i-tune. H

Hi, I have just changed contract and phone and wish to transfer the content of my iphone 4 to my new phone device which is not and I-product. When I attempt to sign into i-tune to transfer the item to dropbox, i am unable to sign into i-tune. Help pls.

Hi, Kilted, I shall put it as below:
Cancelled a contract on my Iphone and started another contract with Samsung Note 2 on O2. Managed to transfer almost all my data bar the content of my notes through drag and drop from itune to sKies prior to contract cancellation.
When I later connected the iphone to the laptop to carry out an advise of going into itune to drag and drop the note content into dropbox from where I could pull into the samsung device, I was denied access into itune with my id , the same which has facilitated my access to this chat community.
Question then: Am I not able to use itune again because of the contract cancellation?

Problem transporting Request from Development to Quality Assurance Server

Hi All,
I m facing a problem of Transporting requests from one System to other.
When adjusting the Request ,the error message reads as follows :
RFC system error in system/destination
[email protected]_HSE
Now,when I check the RFC Connection for [email protected]_HSE,,
i get the message :
" License Check required "
Please respond to this query urgently.....
Thanks in advance

Hi!
I think it's better to call SAP support, if you have problems with the licenses...
Maybe your company forget to pay their fees since a while
Regards
Tamá

Transport request in quality server

Hi everyone..never mind if this is not the correct place to post this question..i have the access to ECC QUALITY SERVER..i tried to generate the datasources in ECC Quality server..it has given PROMPT FOR LOCALWORKBENCH REQUEST pop-up window
when i look for the available requests through F4(input values)..there are no input values..
Dont we have the possibility to activate datasources in quality server?why so?and if anybody knows details about development,quality and production server could you please give me a broad explanation??im confused with these three types of servers and how they work!!
Thank you very much in advance for any help,
Edited by: yarpath on Sep 22, 2011 11:21 AM

Hi ,
Along with provided details Some info about server .
In SAP Landscape we have a server system called SAP architecture
DEV, QAS and PROD.
- DEV would have multiple clients.
190- Sandbox -Sandbox doesn't affect the other servers or clients its standalone system
100- Golden- dev and changes transferred to next level via transports it contains all configuration and master data .So all the configuration settings are done in golden clients and then moved to other clients. Hence this client acts as a master copy for all settings to be done so called "Golden Client"..
180- Unit Test- if configures then Transports from golden client will come here .
- QAS may again have mutiple clients
300- Integration Test
700 to 710 Training.
- PROD usually have one client
this depends on how is the client's business scenario.
Request flow like
DEVELOPMENT -> QUALITY -> PRODUCTION
DEVELOPMENT : where developer create new objects and flow or change existing one .
QUALITY : The objects moved from Dev tested as it has large amount of data and usually a copy of production so new development get tested with real time data and any bugs etc found can be fixed back in dev and get transported again .
PRODUCTION : Day to day business data is present here coming from different systems (R/3 ,flat file ,NON SAP system etc).
--In quality or producation you cannot see your transport request and it will not allow you to change object .
--Usually we have only access to create DTP ,Process chain ,Program etc in Production but we cannot change transfromation etc as the flow can not be disturbed .
--To see the status of your objects in any system which are moved via transport you need to see logs in Dev system .
--this will also tell you which systems are connected to your dev system .
Hopw this will be helpful .
Regards,
Jaya Tiwari

Re-transport the transport request to NQA server after system refresh

Hi
Users are moving the transport requests in NQA (quality server) using STMS tcode and Basis team is moving the trasnport requests using TP command in operating system level.
There are some transport requests that are released and are moved only to NQA server but not in Production server.
After the NQA refresh from Production server, we need to re-create the trasnport route for NQA server
in NQA using SE06 and STMS.
Now users want to re-transport the requests again in NQA server that was moved to NQA before the system copy but they are not able to make it. In the transport queue, users are able to see their transport requests but they are not able to re-transport.
When basis team try to move the same transport requests using TP command in operating system level, it failed with error:
- "Transport request is not in buffer".
- x2n0v2:nqaadm 14> transport250_NQAu126 908807
/usr/sap/trans/NDV/cofiles/K908807.NDV
is this the correct cofile ?y
cofile is K908807.NDV
source system is NDV
transport type is K
transport name is NDVK908807
Renamed to K908807.NDV.INTRANSIT on dbcindv
Datafile copied to dbcinqa
Cofile copied to dbcinqa
-rw-rw-r--   1 nqaadm     sapsys       25606 Oct 29 11:13 /usr/sap/trans/NQA/data/R908807.NDV
-rw-rw-r--   1 ndvadm     sapsys       25606 Oct 29 11:13 /usr/sap/trans/NDV/data/R908807.NDV
-rw-rw-r--   1 nqaadm     sapsys         678 Dec 1 19:05 /usr/sap/trans/NQA/cofiles/K908807.NDV
-rw-rw-r--   1 ndvadm     sapsys         678 Dec 1 19:05 /usr/sap/trans/NDV/cofiles/K908807.NDV.INTRANSIT
Please compare the files before proceeding
Do you wish to continue the import?y
tp addtobuffer NDVK908807 NQA pf=TP_DOMAIN_NDV.PFL
This is tp version 305.13.25 (release 46D) for ANY database
Addtobuffer failed for NDVK908807.
Cofile not existent or corrupted (datafile exists).
If source system is available you may try to reconstruct
the cofile using the command "createinfo".
We used the following method to re-transport the requests to NQA server:
"STMS --> Request -->Delete (the request number)" method delete the transport request from transport queue and from the cofiles/data directory of the operating system and then " STMS --> extra-> other request-> add" allow us to put the transport request back to transport queue in NQA server. Once the transport requests are in queue, we can re-transport all of them one by one or in group.
Question: Is it the right way to re-transport the request in NQA (first delete if from transport queue and then add and then re-import in NQA server).
Id there is any other way to re-transport the requests, pls suggest us.
Thanks
Amar

Amar,
Depending on how many tarnsports you have and also if this is one time, what you can do is ask Basis guys to write a small script which adds to the buffer to your NQA system.
Steps:
1) under /usr/sap/trans/buffer rename the NQA buffer file.
2) create a new empty file NQA (make sure permissions are identical)
3) Provide the list of transports and ask Basis team to put it in a file at Unix level
4) Run a script which will add to the buffer from the source file.
5) From STMS refresh the NQA queue and you should see all the transports ready for import.
Hope this helps.
Thanks,
Naveed
Edited by: Naveed Qureshi on Dec 4, 2008 8:52 AM

How to Transport LSMW to development server to Prodution server

Hi all,
I would like to know how we transport LSMW(project, sub-project, Object) from development server to Production server.
Thanks
Vipin Nagpal

Hi Vipin,
Actually, it depends based upon the requirement. There are some advantages and disadvantages with both of the methods.
See the following documentation. I think this would be helpful for you and based upon your requirement you proceed further.
Transport LSMW Projects
The LSM Workbench provides data transport for a project via both the SAP transport system and down-/upload. (Excluded are the presettings for IDoc inbound processing. These presettings should be manually created in every SAP system and every client.)
1. Generate Change Request
Choosing this function creates an SAP change request containing all information about an LSMW project. This SAP change request can be exported / imported with the usual means of SAP correction and transporting. You can find this function in the initial screen under Extras -> Create change request.
When transporting LSMW data this way, you can trace the transports any time in SAP correction and transporting.
Note 1: When importing such a request, the complete project is deleted from the target system first. It is then created again.
Note 2: When exporting the transport request, all changes to the selected project made until the time of export are entered (not only until the time of creation of the transport request.)
2. Export Project
In the initial screen, select Extras  Export project. This first displays the structure tree of the selected project. Via Select / Deselect you can select whether the entire project or parts of the project are exported. Then select Export. The program then creates an ASCII file.
Note: The selected elements are exported together with their documentation
3.Import ProjectThe exported mapping and rules can be imported into another SAP system.
On the selection screen, select Extras -> Import. The program then prompts you to enter the name of the PC file. The file is imported and the contents are analyzed. After the analysis, a list of the subprojects and objects found is displayed.
You can now mark the objects to be imported. Project data existing already are check-marked. They are overwritten by the import.
You can prevent a project already existing in the target system from being overwritten by using function "Import under different name".
Note: The selected elements are imported together with their documentation.
If you feel this is helpful, don't forget to reward points.

Open transport request in Development server which is not moved to Producti

Similar Messages

Maybe you are looking for