Open value is not updating in credit workbench

Hi
we are using crm 7 ehp2 system currently facing issue in our credit scenario which is integrated with ERP credit configuration.
Open value is not updating in Credit Analyst Workbench(CRM_CAWB) and the same is not updating in erp t-code FD32   field sales value.
I have tried to run the initial load CMDOC_NOTIFY to update opened order value but its showing below error.
The following Errors/Warnings occured. Do you want to continue?
    Message no. SMOF164
The data replication requires the processing of single BDoc instances
   Message no. SMOF197
Pl advise how we can resolve this issue.
thanks Warm Regards
Manoj

Hi
we have resolved this issue. please follow below solution hope it will help you
SPRO - Customer Relationship Management - Basic Functions - Credit Management - General Settings - Maintain Credit Group
Mark flag in the credit update field for the relevant credit group.
Best Regards
Manoj

Similar Messages

Excise values are not updating in factory sales

Dear SCN's,
I'm facing an issue while doing factory sales, while creating sales order and billing I'm using J1IIN for excise invoice and then updating in J1I5 transaction but the values are not updating in table J_2IRG1BAL. Can anyone suggest what to do in order to get the values updated in table.
Thanks & Regards,
Kumar

The following note explains how you need to update J_2IRG1BAL table.
Note 951955 - CIN: General clarifications for RG1 goods
Have a look at this.
G. Lakshmipathi

Asset acquisition value is not updating in Asset history sheet & AW01N

Hi,
The issue is the asset acquisition values are not updated in AW01N & Asset history sheet report for particular asset acquisition transaction only.
it`s showing in asset history sheet but its nt added in the current APC value in the asset history report & also its showing in AW01N transaction but in acquisition change column its not updating.
I have also checked the below link but still i am persisting the same problem.
Asset acquisition value not updating
Regards
Amit

Hi Amit,
check note 366848.
Implement reports RACORR110_B and the report RACORR55 from the note 366848 in your system.
At first run the report RACORR110_B. Check the field ANLC-ANSWL bevor and after running the report.
The report RACORR110_B accumulates the values of the asset line items and writes the result in the field ANLC-ANSWL.
After this, please start the report RACORR55. This report forwards the values in the following year.
(If this is not the reason (ANLC is correct), the report makes nothing.)
Regards Bernhard

Condition Value is not updated

Hi All,
I am using bill of services, so i have a sales order and as a subsequent document a service entry sheet, my invoice is created with reference to the service entry sheet.
In my price procedure i have a percentage guarantee condition.
In the sales order i insert a percentage for the condition, afterwards i create a service entry sheet with reference to the sales order and all the conditions values are copied correctly, till here everything ok.
In the SES i change the guarantee condition value and then i create the invoice, but the guarantee condition value is not updated and takes the value i inserted before in the sales order.
I already tried to change the condition copy control but no sucess.
Anyone can help me with this issue??
Thank you.
Best Regards,
Tiago Ferreira

Hi Madhu,
Here is my code:
    SALES_CONDITIONS_IN-ITM_NUMBER = I_UPLOAD-ITMNUMBER.
    SALES_CONDITIONS_IN-COND_TYPE = I_UPLOAD-COND_TYPE.
    SALES_CONDITIONS_IN-COND_VALUE = I_UPLOAD-COND_VALUE / 10.
    APPEND SALES_CONDITIONS_IN.
    CLEAR SALES_CONDITIONS_IN.
    SALES_CONDITIONS_INX-ITM_NUMBER = I_UPLOAD-ITMNUMBER.
    SALES_CONDITIONS_INX-COND_TYPE = I_UPLOAD-COND_TYPE.
    SALES_CONDITIONS_INX-UPDATEFLAG = 'U'.
    SALES_CONDITIONS_INX-COND_VALUE = 'X'.
    APPEND SALES_CONDITIONS_INX.
    CLEAR SALES_CONDITIONS_INX.
I am just creating a CMR with reference to billing document. Its creating condition recod 'ZAP0' correctly, which i am passing manally. But, its not populating condition value to levy condition it should determine automatically.
Please suggest.
Regards,
Srikanth.

Custom propertie's values are not updated for workflow metadata

Hi,
I've a requirement where I need to add and update some properties. to /etc/workflow/instance/<Instancename>/data/metadata node.
I've two workflow Process steps,
Process step 1:
    Adds some properties to metadata.
Process step 2:
    Updates the propertie's values which are added in Process step 1.
But the issue is update is not working when the node is /etc/workflow/instance/<Instancename>/data/metadata.
i.e. In the step 1, Properties are added to metadata node but In the step 2 propertie's values are not updated to the same node.
Here is my process code:
=================================================
import java.util.Locale;
import java.util.StringTokenizer;
import javax.jcr.Node;
import javax.jcr.Session;
import org.apache.felix.scr.annotations.Component;
import org.apache.felix.scr.annotations.Properties;
import org.apache.felix.scr.annotations.Property;
import org.apache.felix.scr.annotations.Reference;
import org.apache.felix.scr.annotations.Service;
import org.osgi.framework.Constants;
import javax.jcr.Value;
import com.adobe.granite.workflow.WorkflowException;
import com.adobe.granite.workflow.WorkflowSession;
import com.adobe.granite.workflow.exec.WorkItem;
import com.adobe.granite.workflow.metadata.MetaDataMap;
import com.adobe.granite.workflow.exec.WorkflowProcess;
import com.adobe.granite.workflow.model.WorkflowModel;
import org.apache.sling.api.resource.ResourceResolver;
import org.apache.sling.api.resource.ResourceResolverFactory;
import org.apache.sling.jcr.resource.JcrResourceUtil;
import org.apache.sling.api.resource.PersistableValueMap;
import org.apache.sling.api.resource.PersistenceException;
import org.apache.sling.api.resource.Resource;
@Component
@Service
@Properties({
       @Property(name = Constants.SERVICE_DESCRIPTION, value = "Test"),
       @Property(name = Constants.SERVICE_VENDOR, value = "Adobe"),
       @Property(name = "process.label", value = "Test 1")})
public class Test1 implements WorkflowProcess
    @Reference
    private ResourceResolverFactory resourceResolverFactory;
          public void execute(WorkItem workItem, WorkflowSession wfsession, MetaDataMap metadata)
                              throws WorkflowException {
                    System.out.println("Testing");
        try{
            ResourceResolver resolver;
            resolver = resourceResolverFactory.getAdministrativeResourceResolver(null);
            String instancePath = workItem.getWorkflow().getId();
            Node instanceNode=null;
            Session jcrSession = wfsession.adaptTo(Session.class);
           String payload = (String) workItem.getWorkflowData().getPayload();
           //instanceNode=JcrResourceUtil.createPath(payload+"/jcr:content", "nt:resource","nt:resource", jcrSession, true);
                              instanceNode=JcrResourceUtil.createPath(instancePath+"/data/metaData", "nt:resource","nt:resource", jcrSession, true);
                              System.out.println("Test: instance PAth:"+instanceNode.getPath());
            Resource resource = resolver.getResource(instanceNode.getPath());
                if(resource != null)
                    PersistableValueMap valueMap= resource.adaptTo(PersistableValueMap.class);
                    valueMap.put("name", "Rajesh");
                    valueMap.put("id", "A002");
                    valueMap.put("designation","SE");
                    valueMap.save();
                    System.out.println("Name:"+valueMap.get("name"));
                    System.out.println("Id:"+valueMap.get("id"));
            jcrSession.save();
            resolver.close();
        }catch(Exception e)
            System.out.println("Exception:"+e.getMessage());
===================
The code works fine when the node is payload/jcr:content.
Note : Process 1 and Process 2 code is same expect the values I'm passing to the PersistableValueMap.
Any pointers would be more helpful..
Thanks
Siva

Is there anything wrong in my code/ it's a bug..
Thanks
Siva

J_1IRG23D Excise Duty Base Value is not Updated

Hi all,
while doing the Depot sales after Depot Excise Invoice J1IJ the Excise Duty Base Value is not updated in J1iDEPOTSTOCK1 (display depot stock) and also in table J_1IRG23D.

hi
check this SAP Notes
1348970 Incorrect Ship to / Sold to party filled in J1IJ 11.06.2009
1322071 RG23D entry deleted from J_1IRG23D in case of cancellations 16.04.2009
1233836 Additional depot EI status set as 'C' for partial reference 20.03.2009
1263061 J1IJ - material quantity conversion leads to rounding error

Condition value is not updating in shipment cost documents.

We are creating a shipment cost document and condition value is not updating automatically when we enter the amount.
Regards,
Jagadeesh

Dears,
The material master of the material is not maintained with gross weight and net weight, hence automatic updation for condition value is not taking place, i resolved the issue.
Thanks,
Jagadeesh

HT201210 hi i just bought my new iPhone 4s yesterday and when u opened it was not updated so when i tried SO MANY TIMES to update it on the devise and on my new mac it said that there was a unknown error please help me :)

hi i just bought my new iPhone 4s yesterday and when u opened it was not updated so when i tried SO MANY TIMES to update it on the devise and on my new mac it said that there was a unknown error please help me

Please tell us what kind of computer you have, what operating system and what version of iTunes. Not just "the latest version of iTunes", the exact version number.

KP06 Plan Values are not updating in Cost center report

Hi,
I have configured KP06 and uploaded through excel,It is getting uploaded successfully.
But after uploading planned values are not updating in the S_ ALR_87013611 Report.
What could be the reason.kindly give me some inputs regarding this.
Thanks
Supriya

Hi Supriya,
After uploading the entries have you saved or have you verified with excel values.
Please check.
Sateesh

Value is not updating to infoobject

Hi experts,
I am facing a strange issue.
Issue is , Value is not updating to the infoobject in master data attribute.
I am able to see the value at PSA level.
what may be the reason, the object is consistent.
regards,
rajesh.

Check the transformation for the master data attribute and make sure it is mapped to the right field from source.
Also check if there is any start routine written and if you are deleting records in that.
Make sure that once the load is completed, the request is green, available for reporting and some records have been addes as well.
Another thing need to be checked is if you have written any routine for the attribute which may cause no data because of the logic in that code.
Do these checks and provide some more details if issue is not resolved.
Regards,
Gaurav

Letter of Credit value is not updated against Sales Order

Hi SAP Gurus,
I have created LC in VX11N. When I am assigning the LC in the item level while creating the sale order, in the LC master, the open value is still remaining the same. It is not getting adjusted against the sale order value.
For Ex: Against Rs. 1 lakh of LC of the Customer, we create a Sale Order of Total Value Rs.80,000/-. Then the remaining balance of Rs.20,000/- is not getting upadted in the Open Value field in the LC Master.
Also, in the sale order LC screen part, the tab Ret. beside pmt. guarantee form is remaining at 0%. It is not getting edited.
Plz suggest is this a configuration issue or SAP Standard doesn't support LC fully.
Regards
Subrat

Hi SAP Gurus, I am also facing the same problem of open value of Letter of crdit not getting updated. Kindly solve this. It is very urgent.
Regards,
Anant Saraogi

Sales value is not updated in fd33

Dear Team,
I have an issue, Full Advance payment has been received from the customer, after Sales order has been created against this customer, Even Credit Exposure Value shows the more than the order values, but the order still goes for credit block,
There is no open due items for this customer,
When I checked in FD 33, Sales Value(the one which is raised currently) is not updated it shows 0.01, Sales Order is open now with credit block, Can any body clarify why the sales order value is not get updated in FD33.
How do i re update the value and remove the block without releasing from VKM3,
Thanks in Advance,
Muralidharan S

*

Open orders should not update in MD04

Hi, SD gurus,
I have the below requirement,
My business scenario is
when total open sales order quantity crosses a particular number(Ex:1000 Pcs) in a month, after that whatever the sales order we create it should not update in MD04.
Our Business process,
1. Creating a sales order
2. Allocation run (here system will execute Credit check, availability check, and listing an Exclusion etc. here we need to enter sales order no, plant, allocation type)
3. Creating a delivery
4. Invoicing the customer
Note:
Usually when we de check MRP type and allocation in Scheduline category system should not update in MD04, but if we de check this as for our business process system should not execute Allocation run
Thanks in Advance
Yuvaraj.

Respected Lakshmipathiji,
Thanks for your clarification but i have query here..
""if the users are ready to do this manually once a line item exceeds 1000 pcs a month, well and good""
How users will check material wise?(suppose if sales order contains more than 100 line items and each line item will have its own requirement updates--will they do this material wise?)
Is there any report which give the Status on Requirements for group of materials(MD04 status) in Standard SAP??
Phanikumar

Data Migration Opening Balances are not updating in the Report F.08

Hi,
We have uploaded the GL balances in 2008 for the year 2007. But they are not updating in the F.08 report when i executed for 2008.
Why they are not updating in the report. In which table can i check the Data migration values in the system?
Thansk
Kishore

Hi We have uploaded all the values in 2008 with 2008 date. fiscal year is K4.
F.08 Report for the year 2008 is showing only 2008 accumulated values. But not showing the Opening balances which we have uploaded in 2008 for the before years like 2007.
Why it is showing like that?
Thansk
kishore

Contract Release value is not updated with Limit item value

We have SRM 4.0 with ECS scenario.
Contract are created in SRM and replicated to ERP.
If we create PO with Service line and Limit line using contract in both of these line items, contract Release value is getting updated only with Service line item value.
But the contract Total value is the addition of Service and Limit value of PO.
Why Contract Release value is not getting updated with Limit item value. Please help as early as possible.

Hi Sandeep
Yes. there are various reasons .upon your contract incorrect status and linkage not establised / or more attachment in SRM GOA.
what type of contract are you using? GOA or CCTR
If it is GOA - which version of SRM and service pack ?are you in ?
If it is a GOA , BLAREL idoc might failed to post the release value in the SRM .
How contracts are created material / mat group ?
to fix or understand the issue, you need to recreate the issue.
what is the ERROR in BLAREL in SRM idoc monitoring ?

Open value is not updating in credit workbench

Similar Messages

Maybe you are looking for