Open VI Reference Error when Using a LV Created EXE as ActiveX Server
Making a long story short, I'm trying to create an executable in Labview that I can call from another Labview program via active x. I've been using the following article as my guide:
https://decibel.ni.com/content/docs/DOC-9647
It seems simple but I keep getting error 6945 saying that the VI name is no longer suffiencient. I've checked and rechecked the VI name that feeds VI path and I know it is correct. All I'm really trying to do is grab the VI reference so I can hide the front panel. Attached is a screenshot of the code and the error. Any thoughts?
Solved!
Go to Solution.
Attachments:
Screen Shot 2012-07-03 at 4.18.05 PM.png 44 KB
Screen Shot 2012-07-03 at 4.18.35 PM.png 22 KB
Thanks, dbell
This is such an awaited improvement and I am shocked that I did not know about it until now. I want to move to LV 2009 or later so that I do not have to expose bunch of VIs outside of executables. In LV8.6 if you use inheritance of LV Classes then conflicting name was inevitable as overriden VIs always have the same name as the parent method VIs (prefix does not fix it).
And I guess we need to add some comments on this page from PO >> https://decibel.ni.com/content/docs/DOC-9647
TailOfGon
Certified LabVIEW Architect 2013
Similar Messages
-
Error when using Project Gantt Chart in Production Weblogic Server 10.3.5
Dear All,
I have an application utilizing <dvt:projectGantt> Project Gantt Chart. I have tested it in intergrated weblogic server and it is working correctly but when I deploy it in Production Weblogic server, error occurred with NullPointerException on the ViewObjImpl -- class not found exception. I have look into each library used in the ADF runtime on the production server, all the library used are installed and deploy to each server target.
Below is the log:
[2012-07-31T15:16:53.004+08:00] [ifms_server1] [WARNING] [] [oracle.adf.controller.faces.lifecycle.Utils] [host: ifmsbi01] [nwaddr: 10.23.60.85] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 74ddce286346267c:-69fcf19:138d71e59c7:-8000-00000000000026ca,0] [APP: IFMSGanttChart] ADF: Adding the following JSF error message: oracle/jbo/server/ViewObjectImpl[[
java.lang.NoClassDefFoundError: oracle/jbo/server/ViewObjectImpl
at oracle.jbo.server.ViewDefImpl.getBaseComponentClass(ViewDefImpl.java:2472)
at oracle.jbo.server.RemotableCompDef.loadFromXML(RemotableCompDef.java:145)
at oracle.jbo.server.ViewDefImpl.loadFromXML(ViewDefImpl.java:3996)
at oracle.jbo.server.ViewDefImpl.loadFromXML(ViewDefImpl.java:3789)
at oracle.jbo.server.ViewDefImpl.loadFromXML(ViewDefImpl.java:3737)
at oracle.jbo.server.MetaObjectManager.loadFromXML(MetaObjectManager.java:552)
at oracle.jbo.mom.DefinitionManager.loadLazyDefinitionObject(DefinitionManager.java:1133)
at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:592)
I really am in need of assistance on these matter. I have read several article on the web about clearing cache on weblogic server, bundling the required ADF library with application and not mixing JDeveloper version with Weblogic server version, but it still not working in production weblogic.
Best Regards
Faizul
Edited by: 951976 on Aug 10, 2012 12:15 AMDear Arun,
The WLS server is the same for (integrated WLS and Production) . For JRF template I'm sure it is the same. I have deploy another application that used BC, and it work fine in production.
Regards
Faizul -
Jaxb error when using -p to create package
I have been using jaxb in its various forms for a couple years. I am currently using jaxb 2.0 (with JAVA 1.5) and have run it successfully for about a year. Now all of a sudden it is giving me an error (even when I try to re-generate XML files that I could previously generate successfully). I have narrowed down the problem (I think) to the -p argument. If I don't use the -p argument and let jaxb create the XML files and put them in the "generated" directory, it works just fine. But if I try to use -p and specify a directory to put the files in, it gives me two errors:
[ERROR] schema_reference.4: Failed to read schema document 'file:/C:/Pythagoras2
.0/src/ûp', because 1) could not find the document; 2) the document could not be
read; 3) the root element of the document is not <xsd:schema>.
unknown location
[ERROR] schema_reference.4: Failed to read schema document 'file:/C:/Pythagoras2
.0/src/com.prototype.xml', because 1) could not find the document; 2) the docume
nt could not be read; 3) the root element of the document is not <xsd:schema>.
unknown location
I am starting at the src directory and using the command: C:\jaxb-ri-2.0\bin\xjc -p com.prototype.xml ..\classes\Pythagoras.xsd
I thought I could just get around the problem by not using the -p argument and just copying the XML files from the generated directory to the xml directory where my application is looking for them, but jaxb embeds the "package generated" in each XML file and that gives me a compiler error.
Any ideas on why the -p argument would all of a sudden give me errors? Thanks!
DonnaHi,
In IDT - you can't create a BusinessLayer on a BEX query OLAP Connection, and generate a .UNX.
As the warning says: Not supported.
That tutorial shows "adventure works" which is a MS SQL Server Analysis Services demo/sample cube.
As i said above: MSAS is OK for OLAP UNX.
Regards,
H
please vote for these items if you feel so inclined https://cw.sdn.sap.com/cw/ideas/8701
and https://cw.sdn.sap.com/cw/ideas/3657 -
Random error when using cfpdfform to create pdf
I have a series of pdf forms that have been created with extended rights in reader using both Acrobat Pro 9 and Acrobat Pro X. I use cfpdfform to pre-populate the form and name it with a unique guid. Some people randomly are getting the error in reader "This document enabled extended features in Adobe Reader. The document has been changed since it was created and use of extended features is no lonfer available. Please contact the author for the original version of this document."
I have tried to replicate the error using the exact same settings of windows, browser and reader version and cannot replicate. I have researched extensively online and see many people experiencing the same error message but no clear resolution found. Below is the code that I am using to save the prepopulated form. Has anyone else run into this issue?
<cfset uuid = createuuid()>
<cfpdfform source="forms\#url.frpdf#"
destination="forms\exh\#variables.uuid##url.frpdf#" overwrite="YES" overwritedata="YES"
action="populate">
<cfpdfformparam name="name" value="#rtrim(variables.company)#">
<cfpdfformparam name="address1" value="#rtrim(variables.address1)#">
<cfpdfformparam name="address2" value="#rtrim(variables.address2)#">
<cfpdfformparam name="address3" value="#rtrim(variables.address3)#">
<cfpdfformparam name="citystatezip" value="#rtrim(variables.citystatezip)#">
<cfpdfformparam name="city" value="#variables.city#">
<cfpdfformparam name="state" value="#variables.state#">
<cfpdfformparam name="zip" value="#variables.zip#">
<cfpdfformparam name="country" value="#variables.country#">
</cfpdfform>
<cfcontent file="#expandpath(".")#\forms\exh\#variables.uuid##url.frpdf#" type="application/pdf">Depending on your application you may or not be able to carry the links over (reason for graffiti's question). To carry them over you need to use PDF Maker (the create PDF icon in WORD and several other products).
-
Errors when using the Call statement for MS SQL Server
I've tried executing a Stored Procedure using the Call method of Portal 2 Go. But it gets an internal error b/c of it. Any Ideas why and how to resolve?
Hello,
Which version of SAP BOBJ XI3.1 you are using?
What I am aware is BEGIN_SQL was very well working for SQLServer2005 in case of ODBC connection.
Can you try one thing for SQLServer2008 have a Native driver installed on your client machine and use ODBC connection rather than OLEDB connection.
If that works fine, its good
Otherwise you can raise a message for resolving this problem with the support team.
Thanks,
Vivek -
Error when posting my iweb created site to a server other than .mac
This is the error I get when I try to open the home page.
Parse error: syntax error, unexpected T_STRING in /home/fusion/bridgestudents-www/index.html on line 1
Help!This is the error I get when I try to open the home page.
Parse error: syntax error, unexpected T_STRING in /home/fusion/bridgestudents-www/index.html on line 1
You might need to change your server. Here is info on the fixes:
http://homepage.mac.com/thgewecke/parsingerror.html -
Error while using WLST to create a new managed server
Hi All,
I am trying to create a managed server using following code a
"create_server.py"
------------+++++-----------
from java.util import *
from javax.management import *
import javax.management.Attribute
print 'starting the script .... '
connect('weblogic1','barbie@135','http://smart:7001')
edit()
startEdit()
print 'CREATE MANAGED SERVER: Test_Server'
Test_Server1 = cmo.createServer('TestServer1')
Test_Server1.setListenPort(7002)
Test_Server1.setAutoRestart(true)
Test_Server1.setAutoKillIfFailed(true)
Test_Server1.setRestartMax(2)
Test_Server1.setRestartDelaySeconds(10)
Test_Server1.getServerStart().setJavaHome(jvmlocation)
Test_Server1.getServerStart().setJavaVendor('Oracle')
Test_Server1.getServerStart().setArguments('-Xms128m -Xmx256m -Xns64m -Xgcprio:pausetime')
print 'ADD MANAGED SERVERS TO CLUSTER'
Test_Server1.setCluster(dizzyCluster)
print 'ADD MANAGED SERVERS TO MACHINE'
Test_Server1.setMachine(Machine_1)
save()
activate(block="true")
disconnect()
print 'End of script ...'
exit()
-----------------------+++++++++++--------------
and i am running it through WLST. but i am getting some error as
CLASSPATH=C:\oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpa
th\weblogic_patch.jar;C:\oracle\MIDDLE~1\patch_oepe1050\profiles\default\sys_man
ifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~1\patch_ocp360\profiles\defa
ult\sys_manifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~1\JROCKI~1.2-4\li
b\tools.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\oracle\M
IDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\oracle\MIDDLE~1\modules\features\w
eblogic.server.modules_10.3.5.0.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\web
services.jar;C:\oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\oracle\MID
DLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;
PATH=C:\oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\oracle\MIDDLE~1
\patch_oepe1050\profiles\default\native;C:\oracle\MIDDLE~1\patch_ocp360\profiles
\default\native;C:\oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\oracle\MID
DLE~1\WLSERV~1.3\server\bin;C:\oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\oracle\
MIDDLE~1\JROCKI~1.2-4\jre\bin;C:\oracle\MIDDLE~1\JROCKI~1.2-4\bin;C:\oracle\prod
uct\10.1.0\db_1\bin;C:\oracle\product\10.1.0\db_1\Apache\Perl\5.00503\bin\mswin3
2-x86;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WI
NDOWS\System32\Wbem;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\Program Files\
Java\jdk1.6.0_05\bin;C:\oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
Your environment has been set.
CLASSPATH=C:\oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpa
th\weblogic_patch.jar;C:\oracle\MIDDLE~1\patch_oepe1050\profiles\default\sys_man
ifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~1\patch_ocp360\profiles\defa
ult\sys_manifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~1\JROCKI~1.2-4\li
b\tools.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\oracle\M
IDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\oracle\MIDDLE~1\modules\features\w
eblogic.server.modules_10.3.5.0.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\web
services.jar;C:\oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\oracle\MID
DLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\oracle\MIDDLE~1\utils\config\
10.3\config-launch.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbynet.j
ar;C:\oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\oracle\MIDD
LE~1\WLSERV~1.3\common\derby\lib\derbytools.jar;;
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> execfile(c:/create_server.py)
Traceback (innermost last):
(no code object) at line 0
File "<console>", line 1
execfile(c:/create_server.py)
^
SyntaxError: invalid syntax
wls:/offline> execfile('c:/create_server.py')
starting the script ....
Connecting to http://192.168.1.2:7001 with userid weblogic1 ...
Traceback (innermost last):
File "<console>", line 1, in ?
File "c:/create_server.py", line 5, in ?
File "<iostream>", line 22, in connect
File "<iostream>", line 646, in raiseWLSTException
WLSTException: Error occured while performing connect : Error getting the initia
l context. There is no server running at http://192.168.1.2:7001
Use dumpStack() to view the full stacktrace
wls:/offline> execfile('c:/create_server.py')
starting the script ....
Connecting to http://192.168.1.2:7001 with userid weblogic1 ...
Traceback (innermost last):
File "<console>", line 1, in ?
File "c:/create_server.py", line 5, in ?
File "<iostream>", line 22, in connect
File "<iostream>", line 646, in raiseWLSTException
WLSTException: Error occured while performing connect : Error getting the initia
l context. There is no server running at http://192.168.1.2:7001
Use dumpStack() to view the full stacktrace
wls:/offline> execfile('c:/create_server.py')
starting the script ....
Connecting to http://smart:7001 with userid weblogic1 ...
Traceback (innermost last):
File "<console>", line 1, in ?
File "c:/create_server.py", line 5, in ?
File "<iostream>", line 22, in connect
File "<iostream>", line 646, in raiseWLSTException
WLSTException: Error occured while performing connect : Error getting the initia
l context. There is no server running at http://smart:7001
Use dumpStack() to view the full stacktrace
wls:/offline> dumpStack()
This Exception occurred at Fri Sep 16 19:51:07 IST 2011.
javax.naming.CommunicationException [Root exception is java.net.ConnectException
: http://smart:7001: Destination unreachable; nested exception is:
java.net.ProtocolException: Tunneling result unspecified - is the HTTP s
erver at host: 'smart' and port: '7001' a WebLogic Server?; No available router
to destination]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(Exceptio
nTranslator.java:40)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLIni
tialContextFactoryDelegate.java:788)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLIni
tialContextFactoryDelegate.java:366)
at weblogic.jndi.Environment.getContext(Environment.java:315)
at weblogic.jndi.Environment.getContext(Environment.java:285)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialCont
extFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:6
67)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at weblogic.management.scripting.WLSTHelper.populateInitialContext(WLSTH
elper.java:520)
at weblogic.management.scripting.WLSTHelper.initDeprecatedConnection(WLS
THelper.java:573)
at weblogic.management.scripting.WLSTHelper.initConnections(WLSTHelper.j
ava:313)
at weblogic.management.scripting.WLSTHelper.connect(WLSTHelper.java:203)
at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext
.java:61)
at weblogic.management.scripting.utils.WLSTUtil.initializeOnlineWLST(WLS
TUtil.java:147)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
at org.python.pycode._pyx36.connect$1(<iostream>:16)
at org.python.pycode._pyx36.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx42.f$0(c:/create_server.py:5)
at org.python.pycode._pyx42.call_function(c:/create_server.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.core.__builtin__.execfile_flags(Unknown Source)
at org.python.core.__builtin__.execfile(Unknown Source)
at org.python.core.__builtin__.execfile(Unknown Source)
at org.python.core.BuiltinFunctions.__call__(Unknown Source)
at org.python.pycode._pyx41.f$0(<console>:1)
at org.python.pycode._pyx41.call_function(<console>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.core.Py.exec(Unknown Source)
at org.python.util.PythonInterpreter.exec(Unknown Source)
at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:173)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)
Caused by: java.net.ConnectException: http://smart:7001: Destination unreachable
; nested exception is:
java.net.ProtocolException: Tunneling result unspecified - is the HTTP s
erver at host: 'smart' and port: '7001' a WebLogic Server?; No available router
to destination
at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:216)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
at weblogic.jndi.WLInitialContextFactoryDelegate$1.run(WLInitialContextF
actoryDelegate.java:345)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
146)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLIni
tialContextFactoryDelegate.java:340)
... 52 more
Caused by: java.rmi.ConnectException: Destination unreachable; nested exception
is:
java.net.ProtocolException: Tunneling result unspecified - is the HTTP s
erver at host: 'smart' and port: '7001' a WebLogic Server?; No available router
to destination
at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:470)
at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:321)
at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java
:254)
at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:197)
at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:238
at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:200)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
at weblogic.jndi.WLInitialContextFactoryDelegate$1.run(WLInitialContextF
actoryDelegate.java:345)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
146)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLIni
tialContextFactoryDelegate.java:340)
at weblogic.jndi.Environment.getContext(Environment.java:315)
at weblogic.jndi.Environment.getContext(Environment.java:285)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialCont
extFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:6
67)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:198)
at weblogic.management.scripting.WLSTHelper.populateInitialContext(WLSTH
elper.java:520)
at weblogic.management.scripting.WLSTHelper.initDeprecatedConnection(WLS
THelper.java:573)
at weblogic.management.scripting.WLSTHelper.initConnections(WLSTHelper.j
ava:315)
at weblogic.management.scripting.WLSTHelper.connect(WLSTHelper.java:203)
at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext
.java:62)
at weblogic.management.scripting.utils.WLSTUtil.initializeOnlineWLST(WLS
TUtil.java:148)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
at org.python.pycode._pyx36.connect$1(<iostream>:16)
at org.python.pycode._pyx36.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx42.f$0(c:/create_server.py:7)
... 24 more
javax.naming.CommunicationException [Root exception is java.net.ConnectException
: http://smart:7001: Destination unreachable; nested exception is:
java.net.ProtocolException: Tunneling result unspecified - is the HTTP s
erver at host: 'smart' and port: '7001' a WebLogic Server?; No available router
to destination]
please help me for this..
Edited by: Sharad Jain on Sep 17, 2011 8:46 AMHi Sharad,
Put ('') in your command,
wls:/offline> execfile('c:/create_server.py')
Regards
Edited by: scapy on Oct 6, 2011 4:15 PM -
-6502 ORA-06502: PL/SQL: numeric or value error when using 'Create CAPI Definition'
I get an error when I try to create a CAPI definition with Headstart untilities (6i). I use HSU_CAPI revision 6.5.2.0
The detailed information says the following:
Message
BLAPI.OPEN_ACTIVITY
Start HSU_CAPI.run
Number of Tables to create CAPI for 1
Initial checks for table KCS_TENDERS with id 692754610572409851363604771392473242
HSU_CAPT.initial_checks for table KCS_TENDERS
HSU_CAPF.initial_checks for table KCS_TENDERS
HSU_CAPC.initial_checks Custom Services for table KCS_TENDERS
HSU_CAPB.initial_checks BRDD for table KCS_TENDERS
bltext.get_lines_from_repository, p_text_type=CDINOT
bltext.get_line_containing
bltext.get_line_containing
bltext.get_lines_from_repository, p_text_type=CDIPLS
bltext.get_line_containing
bltext.get_line_containing
bltext.get_line_containing
bltext.get_line_containing
bltext.get_line_containing
bltext.get_line_containing
KCS_TENDERS Business Rule Design Definition BR_TNR001_CEV does not have any Trigger Columns. Rule will fire when any column is updated.
bltext.get_lines_from_repository, p_text_type=CDINOT
bltext.get_line_containing
bltext.get_line_containing
bltext.get_lines_from_repository, p_text_type=CDIPLS
bltext.get_line_containing
bltext.get_line_containing
bltext.get_line_containing
bltext.get_line_containing
bltext.get_line_containing
bltext.get_line_containing
Creating CAPI for table KCS_TENDERS with id 692754610572409851363604771392473242
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Pre-Before-Insert-stmt, Open transaction.
Write Text for element type APPLOG with id 753236628580304413262318236391196826 - Text type: ALCODE number of text lines = 6 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580304413262318236391196826 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Pre-Before-Update-stmt, Open transaction.
Write Text for element type APPLOG with id 753236628580332747461215454262479002 - Text type: ALCODE number of text lines = 6 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580332747461215454262479002 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Pre-Before-Delete-stmt, Open transaction.
Write Text for element type APPLOG with id 753236628580361081660112672133761178 - Text type: ALCODE number of text lines = 6 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580361081660112672133761178 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Post-After-Insert-stmt, Close transaction.
Write Text for element type APPLOG with id 753236628580389415859009890005043354 - Text type: ALCODE number of text lines = 6 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580389415859009890005043354 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Post-After-Update-stmt, Close transaction.
Write Text for element type APPLOG with id 753236628580417750057907107876325530 - Text type: ALCODE number of text lines = 6 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580417750057907107876325530 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Post-After-Delete-stmt, Close transaction.
Write Text for element type APPLOG with id 753236628580446084256804325747607706 - Text type: ALCODE number of text lines = 6 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580446084256804325747607706 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Pre-Before-Delete-row, Save old data.
Write Text for element type APPLOG with id 753236628580474418455701543618889882 - Text type: ALCODE number of text lines = 404 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580474418455701543618889882 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Pre-Insert, Call CAPI.
Write Text for element type APPLOG with id 753236628580568865785358936523163802 - Text type: ALCODE number of text lines = 4 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580568865785358936523163802 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Pre-Update, Call CAPI.
Write Text for element type APPLOG with id 753236628580597199984256154394445978 - Text type: ALCODE number of text lines = 4 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580597199984256154394445978 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Pre-Delete, Call CAPI.
Write Text for element type APPLOG with id 753236628580625534183153372265728154 - Text type: ALCODE number of text lines = 17 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580625534183153372265728154 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Post-Insert, Call CAPI.
Write Text for element type APPLOG with id 753236628580653868382050590137010330 - Text type: ALCODE number of text lines = 7 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580653868382050590137010330 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Post-Update, Call CAPI.
Write Text for element type APPLOG with id 753236628580682202580947808008292506 - Text type: ALCODE number of text lines = 144 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580682202580947808008292506 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Post-Delete, Call CAPI.
Write Text for element type APPLOG with id 753236628580767205177639461622139034 - Text type: ALCODE number of text lines = 282 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580767205177639461622139034 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
HSU_CAPF.create_or_find_capi_pack
hsu_capi.find_plm (kcs_tnr_capi, 692754610572409851363604771392473242, CAPI).
capi package found in the context folder
BLPLM.UPD
FREE_FORMAT_TEXT_FLAG......... = Y
IMPLEMENTATION_NAME........... = kcs_tnr_capi
PLSQL_MODULE_TYPE............. = PACKAGE
SCOPE......................... = PUBLIC
COMPLETION_STATUS............. = COMPLETED
NAME.......................... = kcs_tnr_capi
PURPOSE....................... = Custom API package for implementing Business Rules and supporting TAPI
Recreated Package KCS/ KCS_TNR_CAPI, preserving only the Revision History.
HSU_CAPF.add_tags_er_av
bltext.get_lines_from_repository, p_text_type=CDINOT
bltext.get_line_containing
bltext.get_line_containing
bltext.get_lines_from_repository, p_text_type=CDINOT
bltext.get_line_containing
bltext.get_line_containing
bltext.get_lines_from_repository, p_text_type=CDINOT
bltext.get_line_containing
bltext.get_line_containing
bltext.get_lines_from_repository, p_text_type=CDINOT
bltext.get_line_containing
bltext.get_line_containing
HSU_CAPF.create_specification
HSU_CAPF.create_c_tabalias
HSU_CAPF.create_c_tabalias_all
HSU_CAPF.create_aggregate_value
HSU_CAPF.create_aggregate_value
HSU_CAPF.create_aggregate_value
Activity aborted with ORACLE internal errors.
-6502 ORA-06502: PL/SQL: numeric or value error: character string buffer too small
What can I do about it???
Thanks in advance.
Menno HoogsteenWorking on the same project as Menno, I had the time to look into the problem.
The problem is caused by the creation of the capi-function agregate_char_value in the packages hsu_capf. While creating this function the following code is executed:
add(' -- allowable values:');
add(' -- '||l_col_name_list);
This last statement causes the problem because this table is very big. L_col_name_list contains 2391 characters wich is 393 characters to long. So i changed this code into:
add(' -- allowable values:');
add(' -- '||substr(l_col_name_list,1,1990));
add(' -- '||substr(l_col_name_list,1990));
and everything works fine. Perhaps something for a patch?
Kind regards,
Ruben Spekle -
Burning error when using toast
i am using leopard 10.5.5 and using toast 9.0.2 with the hd plugin.
i am getting an error when trying to burn a dvd, i have created a file in an animation program, taken it into final cut pro, edited what i wanted, then exported it as 1080i50. the file plays no problem in quicktime on my laptop, but i need to put it on DVD. opening up toast, it goes into the prog window, encodes the file but then i get an error, -50, can not burn DVD.
does anyone know of this problem, or maybe has any ideas on what i can do to work out the problem?
cheers
bretBruce Etnyre wrote:
His first sentence states the OP is using 10.5.5 and apparently has not updated the profile.
sure confused me
I occasionally get errors when using Toast to burn DVD’s. I found quitting other applications during the burn eliminated the errors. Not the optimal solution, but it couldn’t hurt to try.
I think he is referring to HD DVDs per his first sentence, but it's not clear to me.
It could be anything from a bad blank to a flaky optical writer to, as you mention, other software running. I usually turn all my apps off when burning DVDs. Mail, Safari, Firefix, etc., although on fast machine like this one it probably does not matter.
On the other hand, when I burn a R/W DVD or CD, I ignore these things and just computer as usual. -
TS1702 unknown error when using the app store
unknown error when using the app store
Im sorry I will try to be more clear.. and I appreciate all of ur input. Wi-fi works fine.. everything opens and functions fine on the I pad. The problem is I will click on app store or the I tunes store...it opens fine and I am able to look at and download apps etc... but after being in the appstore or I tunes store for a couple of minutes I get kicked out to the I pads home screen. Its like pushing the home button but I didn't. It only seems to do this when im in the app store or I tunes store. I have been using the chrome browser and other downloaded apps such as ebay just fine with out this problem occurring. Not sure about safari as I dont use it and use chrome instead. Um I don't think the home button its self is faulty because it works fine and as stated before this only happens when I am in the appstore or I tunes . I've only had this I pad 1 64gb wi-fi for a few days .. I got it off of ebay it was stuck in restore mode getting error code 1611. I was able to successfully Restore it with I tunes and it running ios 5.1. Seams to work great besides the problem being mentioned.
-
Photoshop CS4 "Program Error" when using Text tool
Hello. I was having problems with Photoshop displaying a "Program Error" every so often, so I deleted the preference file and all seemed good. But after deleting the preference file for my Photoshop CS4 and re-launching Photoshop, the text tool causes Photoshop to display a Program Error when using the tool. It never did this before. Should I reinstall Photoshop? I am using a Powermac G5 running 10.5.8. I have already tried repairing the disk permissions.
ThanksThats kinda what I thought too, but the problem started happening randomly. It started when we were trying to use photomerge with large photos. The program just started giving the program errors. I still think it may be a font problem, but without going through my 2000+ fonts and disabling them one by one, how can I resolve this issue?
Thanks -
I'm running Firefox on a Windows 7 machine. Firefox won't open following the latest update. I've read the help articles and it seems like I need to create a new profile because my settings have likely been corrupted. I'm unable to open Profile Mgr, even when using entire directory path in cmd line. I've tried the following commands in the command line:
firefox -p
"C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -p
Nothing happens with either command.
I'm also running Norton Internet Security. I read a help article Re Virtual Browsing features possibly causing a problem. The article said to check the virtualization setting in the internet security software and to clear the virtual cache. I went thru all of the settings menus in Norton Internet Security version 21.6.0.32 and I didn't see anything that looked like 'virtualization" settings, so I assumed that this doesn't apply to me.
If you have any ideas, I'd sure appreaciate your expertise!!''arcandl [[#question-1038482|said]]''
<blockquote>
I'm running Firefox on a Windows 7 machine. Firefox won't open following the latest update. I've read the help articles and it seems like I need to create a new profile because my settings have likely been corrupted. I'm unable to open Profile Mgr, even when using entire directory path in cmd line. I've tried the following commands in the command line:
firefox -p
"C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -p
Nothing happens with either command.
I'm also running Norton Internet Security. I read a help article Re Virtual Browsing features possibly causing a problem. The article said to check the virtualization setting in the internet security software and to clear the virtual cache. I went thru all of the settings menus in Norton Internet Security version 21.6.0.32 and I didn't see anything that looked like 'virtualization" settings, so I assumed that this doesn't apply to me.
If you have any ideas, I'd sure appreaciate your expertise!!
</blockquote>
''philipp [[#answer-670108|said]]''
<blockquote>
hello arcandl, when firefox isn't launching after you double-click on the shortcut this is sometimes also a sign of malware being active on a system.
you might want to try running a scan with some different other security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] which are specialised in removing adware and browser hijackers.
[[Troubleshoot Firefox issues caused by malware]]
</blockquote>
Phillip - You're a genius!!! I ran malwarebytes and it resolved my problem. Thank you so much!!! -
Error when using PPR in the OA page developed.
HI,
We are encountering an error when using PPR for the custom OA page being developed. I am using JDeveloper version 9.0.3.5(Build 1437) and Oracle Applications version 11.5.10.CU2. The scenario we are using PPR and the steps to reproduce the issue is mentioned below,
Scenario:
1) PPR is enabled for a custom OA page that is developed.
2) The PPR is being used to enable or disable a particular field based on the
selection of a value in a poplist in the same OA Page.
Error replication steps:
1) The user enters a value in the primary mandatory field which has to have
unique value.
2) The user selects a value from the poplist of a field which has PPR associated.
3) The user enters data in all other mandatory fields in the OA page except one
and tries to save the form and is shown a error message saying that all
mandatory fields are not entered(This is correct). Now the page gets
automatically refreshed and so the entered values are wiped off.
4) Now if the user again enters a value in the primary mandatory field (as in
step1) and if that value happens to be already existing value and then select
a value from the poplist which has PPR enabled then immediately the error
"Please enter a unique value" is entered, though we did not save the record.
The unique record validation would happen only at the time of saving the
record as per out business logic.
5) But if in Step 4 if i had entered a unique value again then the above said error
does not happen. There are few more similar kind of issues happening in the
same page because PPR is enabled.
Please note that this issue happens only when the page is deployed in a oracle
applications instance and not in JDeveloper.
Would this issue because of some cacheing problem? If Yes then how do we resolve it? Or would it be some other problem caused by our internal coding.
Any inputs for resolving this issue would be highly appreciated.
Thanks, Raja.What works in Jdeveloper should work when deployed in iAS as well.
And PPR is an old feature given quite enough time to mature, so before we suspect OA we should investigate the code. What I do not understand is how the page refreshes in Step 3 and why does the user have to re-enter the fields just because he missed entering one mandatory field the last time.
Mandatory field validations are client validations set by making the fields 'Required'. You obviously have client validations turned off on your PPR, otherwise you would be stuck with a javascript popup on PPR. The only way you can get the "Please enter unique..." error on PPR is Server Validation. So where have you placed this validation? If it is not in the EO, is it in the AM? And are you unconditionally calling the AM validation method in your processFormRequest? The PPR will also go through processFormRequest so I hope the PPR event is in a different if-else block. -
Java Heap Error when using Stateless Session Timer Bean deployed in Oracle
Hi,
Am getting following Java Heap Error when using Stateless Session Timer Bean deployed in Oracle 10g AS R3 (Oracle Containers for J2EE 10g (10.1.3.0.0) (build 060119.1546.05277) ):
06/08/02 14:58:43 javax.ejb.EJBException: java.lang.OutOfMemoryError: Java heap space
06/08/02 14:58:43 at com.evermind.server.ejb.EJBUtils.getLocalUserException(EJBUtils.java:304)
06/08/02 14:58:43 at com.evermind.server.ejb.interceptor.system.AbstractTxInterceptor.convertAndHandleMethodException(AbstractTxInterceptor.java:67)
06/08/02 14:58:43 at com.evermind.server.ejb.interceptor.system.TxNotSupportedInterceptor.invoke(TxNotSupportedInterceptor.java:45)
06/08/02 14:58:43 at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
06/08/02 14:58:43 at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:86)
06/08/02 14:58:43 at com.evermind.server.ejb.StatelessSessionEJBHome.invokeTimer(StatelessSessionEJBHome.java:71)
06/08/02 14:58:43 at com.evermind.server.ejb.EJBContainer.invokeTimer(EJBContainer.java:1624)
06/08/02 14:58:43 at oracle.ias.container.scheduler.TimerTask.runBeanTimer(TimerTask.java:92)
06/08/02 14:58:43 at oracle.ias.container.scheduler.TimerTask.run(TimerTask.java:184)
06/08/02 14:58:43 at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:819)
06/08/02 14:58:43 at java.lang.Thread.run(Thread.java:595)
06/08/02 14:58:43 Caused by: java.lang.OutOfMemoryError: Java heap space
I had tried using -Xms / -Xmx options (upto 1 GB).
The trace of exception gets delayed (from being displayed on the console) as the memory size is increased; but after sometime it starts getting displayed on the console.
Even though this exception is displayed on the console, the Timer Bean continues to execute upto sometime before it finally crashes!
If anyone has encountered such problem; would appreciate if you could share the solution.
Regards, VidyadharHi guys, I have the same problem. I have an application EAR file with two modules (EJB and WAR starting in this order). The application can schedule a process via EJB timer. In this case restarting the server I receive the error above. If I change the modules start order --> WAR - EJB the server start correctly, but the application scheduler fails (the persistency is not working) with this error:
07/10/09 10:30:54 FINISSIMO: TimerTask.runBeanTimer java.lang.NullPointerException; nested exception is: java.lang.NullPointerExceptionjavax.ejb.TransactionRolledbackLocalException: java.lang.NullPointerException; nested exception is: java.lang.NullPointerException
java.lang.NullPointerException
at java.util.ListResourceBundle.handleGetObject(ListResourceBundle.java:107)
at java.util.ResourceBundle.getObject(ResourceBundle.java:319)
at java.util.ResourceBundle.getString(ResourceBundle.java:285)
at java.util.logging.Formatter.formatMessage(Formatter.java:108)
at oracle.j2ee.util.TraceLogFormatter.format(TraceLogger.java:124)
at oracle.j2ee.util.TraceLogger$TraceLoggerHandler.publish(TraceLogger.java:105)
at java.util.logging.Logger.log(Logger.java:428)
at java.util.logging.Logger.doLog(Logger.java:450)
at java.util.logging.Logger.log(Logger.java:539)
at oracle.ias.container.timer.TimerEntry.readObjFromBytes(TimerEntry.java:308)
at oracle.ias.container.timer.TimerEntry.getInfo(TimerEntry.java:107)
at oracle.ias.container.timer.Timer.getInfo(Timer.java:367)
at oracle.ias.container.timer.EJBTimerImpl.getInfo(EJBTimerImpl.java:89)
at com.finantix.foundation.integration.ejbtimer.EJBTimerServiceExecutorBean.ejbTimeout(EJBTimerServiceExecutorBean.java:42)
at com.evermind.server.ejb.interceptor.joinpoint.EJBTimeoutJoinPoint.invoke(EJBTimeoutJoinPoint.java:20)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:53)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at com.evermind.server.ejb.StatelessSessionEJBHome.invokeTimer(StatelessSessionEJBHome.java:38)
at com.evermind.server.ejb.EJBContainer.invokeTimer(EJBContainer.java:1714)
at oracle.ias.container.scheduler.TimerTask.runBeanTimer(TimerTask.java:106)
at oracle.ias.container.scheduler.TimerTask.run(TimerTask.java:220)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
javax.ejb.TransactionRolledbackLocalException: java.lang.NullPointerException; nested exception is: java.lang.NullPointerException
at com.evermind.server.ejb.EJBUtils.getLocalUserException(EJBUtils.java:309)
at com.evermind.server.ejb.interceptor.system.AbstractTxInterceptor.convertAndHandleMethodException(AbstractTxInterceptor.java:73)
at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:55)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at com.evermind.server.ejb.StatelessSessionEJBHome.invokeTimer(StatelessSessionEJBHome.java:38)
at com.evermind.server.ejb.EJBContainer.invokeTimer(EJBContainer.java:1714)
at oracle.ias.container.scheduler.TimerTask.runBeanTimer(TimerTask.java:106)
at oracle.ias.container.scheduler.TimerTask.run(TimerTask.java:220)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NullPointerException
at java.util.ListResourceBundle.handleGetObject(ListResourceBundle.java:107)
at java.util.ResourceBundle.getObject(ResourceBundle.java:319)
at java.util.ResourceBundle.getString(ResourceBundle.java:285)
at java.util.logging.Formatter.formatMessage(Formatter.java:108)
at oracle.j2ee.util.TraceLogFormatter.format(TraceLogger.java:124)
at oracle.j2ee.util.TraceLogger$TraceLoggerHandler.publish(TraceLogger.java:105)
at java.util.logging.Logger.log(Logger.java:428)
at java.util.logging.Logger.doLog(Logger.java:450)
at java.util.logging.Logger.log(Logger.java:539)
at oracle.ias.container.timer.TimerEntry.readObjFromBytes(TimerEntry.java:308)
at oracle.ias.container.timer.TimerEntry.getInfo(TimerEntry.java:107)
at oracle.ias.container.timer.Timer.getInfo(Timer.java:367)
at oracle.ias.container.timer.EJBTimerImpl.getInfo(EJBTimerImpl.java:89)
at com.finantix.foundation.integration.ejbtimer.EJBTimerServiceExecutorBean.ejbTimeout(EJBTimerServiceExecutorBean.java:42)
at com.evermind.server.ejb.interceptor.joinpoint.EJBTimeoutJoinPoint.invoke(EJBTimeoutJoinPoint.java:20)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:53)
... 9 more
Any idea?
Thx Auro -
Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?
Have no idea of what you were even doing in Photoshop my crystal ball is out for repairs so I can not see.
Maybe you are looking for
-
To get the Invoice and document no field
Hi gurus I'm taking vbeln from vbrk to show the document no. But it contains both Document no and Invoice no . records. Which table should I refer to get these field records segergated. Plz Reply immidiately Regards Shubhra
-
How can I disable auto-switching desktops?
I've long appreciated the spaces/mission control feature of OS X. However, it seems more oriented to organizing desktops by application rather than by project. Like many users, I suspect, I use different desktops for different projects, each of which
-
1120: Access of undefined property but4.
stop(); import flash.events.MouseEvent; but3.enabled; but3.addEventListener(MouseEvent.CLICK, pla); but4.enabled; but4.addEventListener(MouseEvent.CLICK, sto); function pla(e:MouseEvent):void { gotoAndPlay(1); function sto(e:MouseEvent):void { stop()
-
Converting value using lookup table
I'd like my query return the TRUSTID of '8' to the actual value of 'PPL' from the 'lookup_trust_table'. So instead of returning the ID of '8' from the ID field, return the value in the 'Trust_name' field. use database SELECT * FROM tblasset WHERE
-
Safari won't display a Bank website properly -
When Safari loads this Chinese Bank website - https://mybank.icbc.com.cn/icbc/perbank/index.jsp (BTW my Mac is set in English as major language): the 'Account Number' column shows ok, but the 'Password' & 'certify code' columns are closed and blocked