To get the Invoice and document no field

Hi gurus
I'm taking vbeln from vbrk to show the document no. But it contains both Document no and Invoice no . records. Which table should I refer to get these field records segergated.
Plz Reply immidiately
Regards
Shubhra

hi
check out this tables
VBRP Billing Document: Item Data
VBRK Billing Document: Header Data
VBLNR - Document Number of the Payment Document in the table <b> REGUH </b>
VBLNR - Document Number of the Payment Document in the table <b>REGUP </b>
Reward points if it is helpful.
Thanks&Regards
Lokesh

Similar Messages

Getting shipto customer and unloading point field of PO

Hi Abapers ,
Im having a difficulty to find the corresponding fields namely the ship to customer and unloading point of PO. basically the logic is like this: for example: given the sales doc i can used the table vbpa to get the partner type = SH which is the ship to party then get the customer and unloading point field.
for SO i can used table vbpa.how about in PO?i need to get the shipto customer and its unloading point field.which field and table will i used?

Table : EKPA ( Partner Roles in Purchasing )
Field : PARVW
Mathews

Tables linking the invoice and accounting document

Hi,
Can anyone tell me tables linking the invoice and accounting details table BSEG?
Regards,
Shanu

Following BSEG fields can be found in VBRK
MANDT
BUKRS
BELNR
GJAHR
ZUONR
VBUND
VBELN
ZTERM
ZLSCH
BVTYP
MSCHL
MANSP
MABER
STCEG
XEGDR
KKBER
KIDNO
BUPLA
Similarly following fields can be found in VBRP
MANDT
VBELN
thanks
G. Lakshmipathi

SUPPLEMENT DESCRIPTION OF MATERIAL - printed on the invoice and sales docum

Hi,
Exists in the master materil some field where we can include complement the description to be printed on the invoice and sales document?

Hi
You can use this Function Module GET_SERNOS_OF_DOCUMENT can be used to retrieve serial numbers corresponding to any of the following documents.
   1. Delivery
   2. Sales order
   3. Material document
Input parameters which needs to be passed changes based on the type of document.
Following are required fields to be passed as input parameters to get respective document serial numbers
1. Delivery
KEYDATA-TASER = 'SER01'
KEYDATA-LIEF_NR - delivery number
KEYDATA-POSNR   - delivery item number(optional)
After getting the output you can get it print on the invoice
By linking LIKP-VBELN to vbrp-vgbel (delivery number)
regards
Prashanth
Edited by: Prashanth@SD on Oct 27, 2010 3:00 PM

How to get the Next Material Document Number

Hi,
Please let me know How to get the next Material Document Number using Functional Module,
Material Document number are in MSEG table.
Regards,
Ganesh

Hi Ganesh,
if you want the next matrial number then first of all you have to define it as a number range in transaction snro.After creating the number range you have to define the interval.
now you can use your number range by calling the function module
CALL FUNCTION 'NUMBER_GET_NEXT'
      EXPORTING
        nr_range_nr             = '01' " here you have to give the number range number which you have defined in number range
        object                  = 'ZPRODLOG' " Number Range
      IMPORTING
        number                  = wa_prod_error_log-seqnr " sequence number generated,in your case material number field
      EXCEPTIONS
        interval_not_found      = 1
        number_range_not_intern = 2
        object_not_found        = 3
        quantity_is_0           = 4
        quantity_is_not_1       = 5
        interval_overflow       = 6
        buffer_overflow         = 7
        OTHERS                  = 8.
each and every time next number will get generated .
i hope this will help you.
Thanks,
Tanmaya

Arching of files is gone from the downloads and documents folder

The arching list of files is gone when rolling over the downloads and documents folder. I removed the downloads folder by accident yesterday from the dock. Once I found it, I replaced it back on the dock and now the arching of files is gone on both folders. I have them as lists by date. I have restarted my MacBook Pro several times, clicked on the dock and properties and nothing seems to work. Does anyone know how to get it back? Are there any settings that I am missing?. Thanks!

Right click on the folder in the Dock (or hold down the Control key and click on it if you have a one-button mouse), and choose "Stack" under the "Display as" section, and "Fan" under the "View content as" section in the resultant contextual menu. You can also choose how they are sorted from this menu as well.
Message was edited by: Dan Parnell

How to get the width of a numeric field at runtime

Hi, everyone :D
Is there a built-in that let me get the width of a numeric field at runtime? The SRW bulit in only has the SWR.GET_PAGE_NUM built-in. Is there something like the Get_item_property of Forms IN Report?
Thanks
Edited by: user12422762 on 07-ene-2010 14:16
Edited by: user12422762 on 07-ene-2010 14:30
Edited by: user12422762 on 08-ene-2010 4:40
Edited by: user12422762 on 08-ene-2010 4:50

Hi. Thanks for answering. I need the width because i want to set the format of the field at runtime. The quantity of decimal digits for all the numeric fieds in the report is received as a parameter.
I can use a function to create the respective decimal mask ('D99,'D999',etc.) and then call the SRW.SET_FORMAT_MASK in the format trigger of every single field, but i'd have to type the mask of the integral part of the number in the code of the trigger ('99G999D99, '999G999G999D'). However, If i could get the width, i'd just create a function and call it from every format trigger.
Edited by: user12422762 on 08-ene-2010 10:05
Edited by: user12422762 on 08-ene-2010 10:06
Edited by: user12422762 on 08-ene-2010 10:08

Get the Type of a generic field at runtime, How to?

Hello,
As the topic already says, i need to get the Type of a particular field of a class. This field is declared private and generic. In C# there is a method
Type Object.getTypeIs there any specific way to do this in Java 1.5?
Please excuse my poor english.
Thanks in advance.
Markus

McNepp wrote:
endasil wrote:
McNepp wrote:
If you want to know the parametrized type (String in the example), I think there is no way of knowing this in Java 1.5 or Java 1.6, since the parametrized type is erased and not available at run time.The type of a parameterized field is not erased.For most intents and purposes, it is. Type erasure refers to the fact that at runtime, there are not actually multiple class binaries depending on the generic arguments to a class. Therefore, an ArrayList<T> is actually just an ArrayList with no generics.
Frankly, I don't understand why you insist that the information on generic fields that the OP was asking about is lost at runtime.I wasn't trying to insist that. At the time, I was replying more to Saish and trying to reaffirm that most information about generics is lost at run-time. I mistakenly ignored how you qualified it with "field."
What you write about instances of generic classes losing their type information is of course correct, albeit not to the point of the original question.Nope, you're right. I was just trying to reconcile the fact that many people get confused that there's any information available at run-time, and so start down the path of thinking that type erasure doesn't exist. But it very much does.
The original question was about how to obtain the type of a generic field.And I did show in my example that even that is fairly limited, given that if the type is provided by the parameter of the class, it doesn't give you anything useful (I'm not trying to say you said it would!).
The compiler preservers this information in the class file, so it can be obtained at runtime. Frameworks like JPA put this to use extensively, proving that it is of real value.Definitely. However I don't see this having as much to do with generics as basic reflection functionality. If you can get the type of a field at run-time, you should be able to get the parameters as well! That should in no way belittle its value, though. But I would have guessed (knowing little about) that JPA wouldn't put that to use so much as the type parameters of an accessor return type or mutator argument type. Especially since I thought we'd shown that you would need your fields to be non-private for JPA to be able to gain information about their type.
Edit: getDeclaredField works fine with private members, and returns the expected "java.lang.String" from jschell's example above
Edited by: endasil on 28-Apr-2009 10:39 AM

How to dynamically get the SOM expression of a field?

As a follow up to the note below, I would really appreciate any help as of how to get the SOM expression of a field dynamically, by this, I mean how to get the SOM expression of a field at running time using JavaScript.
Thanks,
Isis
That does make things clearer. You will have to save the change information in the XML. I realize that you don't want to save an xml node for every field, but there is a better way. You can use scripting to add data nodes to the XML data in the form. I'm thinking of the following:
Include an empty container node in your XML schema: <HighlightedFields></HighlightedFields>
When a field is changed, in the field's change event call a common script: HighlightChangedField, passing in the object. The script will highlight the field (set the border a certain color or whatever). It will also add node underneath the HighlightedFields data node with the SOM expression of the field. The SOM expression is the "path" of the object in the form heirarchy, sort of like an xpath. So if you have a subform named Subform1 and you change the Name and Address textfields, you might end up with something like:
<HighlightedFields>
    <HighlightedField>
        <SOMExpression>xfa[0].form[0].myform[0].Subform1[0].Name[0]</SOMExpre ssion>
     </HighlightedField>
    <HighlightedField>
        <SOMExpression>xfa[0].form[0].myform[0].Subform1[0].Address[0]</SOMEx pression>
     </HighlightedField>
</HighlighedFields>
The upside of this is that you only store XML nodes for what is changed instead of needing a specific XML node for each field. The downside is that you will need a call to the common script in every field's change event: HighlightChangedField(this);
Now, to make this work when a form is loaded the next time, in the initialize event at the topmost subform in the hierarchy you add a script that walks the HighlightedFields data node, and for each HighlighedField entry you highlight the contained object. You can get a reference to an object using its SOM expression, so just take the SOM expression from each entry and do an xfa.resolveNode(SOMExpression) to get the object, then set whatever attributes you want to highlight the field.
The big issue I see with this would be if you have dynamically added objects on your form. In that case you would probably need to store the instance index along with the SOM expression for each changed object, then use that instance number when highlighting on form load.

As a follow-up, I had said I would try to put together an example for you. The setting of the change indications and the highlighting of the fields is not a problem, but I did have an issue that perhaps one of the experts on the forum can help with:
The problem is how to detect a change in a text field without a lot of overhead. You can't just place a call to the highlight method in the Exit event without checking for a change, since the user can just tab from field to field without changing anything. Unfortunately the properties that show the old text and new text of a field are not valid on the Exit event. An alternative is to use the Change event, but with a text field the event fires for every character typed. This seems like a lot of extra processing..
Anyone know a better way? I went as far as using the extras collection on fields to hold the last value, but that adds a lot of complexity since it needs to be set to the initial raw value when the form is first loaded. I'd like to find a solution that doesn't require a lot of code to be added to every field on the form.

How can I get the start and end of a date range?

Post Author: RobR
CA Forum: Formula
Greetings!
I have a report whose records are selected if a date field is within the date range returned by the LastFullWeek function. I want the header for that report to print the first and last dates in that range. I don't see a way to extract those dates from a date range. How do I do it?
Also, I think it would be nice to be able to walk through a date range using a for loop, something along the lines of the following:
for (thisDate in LastFullWeed)( do something;)
but I didn't see syntax like that in the help system. If I could do this, then I could get the first and last date. Is this possible?
Thank you!
RobR

Post Author: SKodidine
CA Forum: Formula
If all you want is the starting date and ending date of the function LastFullWeek, then all you have to do is this:
minimum(LastFullWeek) & ' ' & maximum(LastFullWeek);
On a side note, from your post: for (thisDate in LastFullWeed) Whatcha smokin' Willis??

How to get the Title and Tcode of a Program during run time

Hello,
I am new to abap and I have this question please. Is the a way to get the title, Tcode and Author of a program during run time? I would like to get the name and title of a program or a view or an include during run time.
Using table TADIR, you can only get the object_name and the author. Is the a way for me to get the Title of the repository object and any Tcode if any is available for the case of a program?
I loop forward for your respond.
Thank you.
Sabina

You can get it by accessing SYST.
SY-TITLE for Title
SY-TCODE for Tcode
I don't think there is any field in SYST for the Author.
To get the author name you can use the TRDIR table.
Regards,
Naimesh Patel

How to get the list of documents

Hi everyone
Can anyone help me How to get the list of documents residing in a folder of KM repository of SAP Netweaver using a simple java program
Thanks in ADV.
Rupesh Khemka

Hi Rupesh,
I have written the code for you and it works with WebDynpro, no seperate java program is required.
Just try to paste it in your application code and run it.
try{
     // Will check the user athentication for EP
                IWDClientUser wdClientUser = WDClientUser.getCurrentUser();
     IUser sapUser = wdClientUser.getSAPUser();
     com.sapportals.portal.security.usermanagement.IUser ep5User = WPUMFactory.getUserFactory().getEP5User(sapUser);
     ResourceContext context = new ResourceContext(ep5User);
                // The path in which your folder resides
     RID rid1 =RID.getRID("/documents/Public Documents/SCAP/");
     IResourceFactory factory1 = ResourceFactory.getInstance();
     ICollection icollection = (ICollection)factory1.getResource(rid1, context);
     IResourceList resourcelist = icollection.getChildren();
     int size1 = resourcelist.size();
     for(int s=0; s<listOfDocuments.getLength(); s++){
          IResource resource = resourcelist.get(i);
          InputStream input = new InputStream();
          input = resource.getContent().getInputStream();
}catch(Exception e){
     e.getMessage();
Once you get the InputStream everything else is possible....
This will surely help you in reading the documents from KM.
Regards,
Rekha Malavathu

How to get the Folders and subfolders collection in Project Manager

Hi,
I am trying to get the folders and subfolders collection in Project Manager, so that I will be able to loop through the collection and be able to create a project under the appropriate folder.
Any suggestions?
Thanks.
Bhanu

Anything you do without submitting to form has to be done on the client side (ususally by JavaScript) using data which has been send already from the server.
With JavaScript you can do quite a bit. You can download tables which don't necessarilly appear on the screen, loading them into JavaScript arrays by dynamically generating javascript. Then you can pick up events like drop-box selection and use these tables to chose what you do next (e.g. preloading other fields, setting drop box content etc.).
Or, you can cause forms to be submitted when actions like a selection happen without the user clicking a button. It's generally a matter of how much data you'd need to transmit.
Another posibility is to use a Java applet, which can generate requests to the server and handle the results as it chooses. That are a number of problems with that but occasionally it's the best solution.
What you can't do is to handle user input inside a JSP. The JSP has come and gone before the user even gets to see your form.

I need to get the value of a text field that is located in another page JSP

I need to get the value of a text field that is located in another page JSP. How do I do that?

Well you see, I have a page at angelfire.com, which
does not support JSP. I want to call a script located
at mycgisever and then, when pressing a link on the
former page, the JSP page is loaded, and the script
get the value from the text field on the OTHER page.
Is this possible?I know nothing about cgi. But that should not prevent me from understanding what can and cannot be done, assuming cgi is sort of comparable with jsps.
I'm unable to understand your description clearly. Try to explain it better. Give precise steps that you intend to follow and I should be able to help you further.
So you have a page1.
You hit submit from page1.
That goes to the cgiserver.
From the cgiserver, programmatically load up the jsp.
search this for the text field.
Display it on your page2.
Is that what you are trying to do?
BTW, won't be able to help you with cgi scripting at all. Can help with Java and Jsp.

Reversal of the Invoice Verification Document

Dear Freinds,
The users are trying to do the reversal of the Invoice Verification Document, but the system gives the error message 'No Reversal possible, Reverse Value must be reset'. When we look at the diagnosis, it suggests that the qty is same but the value is not the same as Invoice. The PO history for this item in the PO does not show any credit note passed which would result in the difference in the value.. What else could we check to resolve the issue.
Thanks!
Regards,

Hi Jeya,
Thanks for the help, we haven't used in BADI or User Exit, how else can we find this out and resolve the issue?
Regards,

To get the Invoice and document no field

Similar Messages

Maybe you are looking for