Opening the Aperature file!

I just got the trial aperture to try it and see if I like it. I downloaded it onto my computer and then went to open it and it would not open. Is there something special I need? It says my computer is compatable, but no matter what I try it won't open! Any suggestions? I am at a loss...

Hi ,
if it a Excel file ..
do the following..
    OPEN DATASET pg_out2              "appl file
            FOR INPUT IN TEXT MODE
            ENCODING DEFAULT.
    IF sy-subrc EQ 0.
      DO.
        READ DATASET p_infile INTO w_temp.
*       Condition To check when cursor reaches End Of file
        IF sy-subrc EQ 0.
          PERFORM f_split_appl_data.
        ELSE.
          EXIT.
        ENDIF.
      ENDDO.
      CLOSE DATASET p_infile.
    ELSE.
      MESSAGE 'Error in opening file' type 'E'.
    ENDIF.
FORM f_split_appl_data .
SPLIT w_temp AT ',' INTO : wa_inputfile-plannum ......   "Split at , for excel or CSV file formats at appl files
APPEND wa_inputfile TO t_inputfile.
ENDFORM.                    " F_SPLIT_APPL_DATA
Prabhudas

Similar Messages

Is there a way to open the last file I used in InDesign/Illustrator/Photoshop when I open the app

I want to create a shortcut (Win7) that will automatically open the last file I used in the above apps when I open the app. Is there a command line switch like /r or /l that does that?

Thanks, your point is well taken... It would be nice, though, to have the ability to sort a "Last Used" column in iTunes and select a bunch of apps to remove in one shot.

Imac is no longer able to open the Configuration file

Hi ,
I have an imac ( ilamp) 20' connected to ADSL, via Netopia Router which is connected to the Airport extreme connected to imac, for the PB Aluminum Tiger 10.4.5. we both can connect. PB can print via imac/printer.
The imac is no longer able to open the Configuration file, when i enter the pswd which is correct, i get the message "The Airport Admin. Utility was unable to read the configuration of the selected base station an error occurred while reading the configuration "
My Beau updated Airport to V5.7, this is the first time since the update I've tried to access the conf. file for the imac which i have done numerous times prior.
I have a new base station Ip address 254.128.0 in Airport Utility Admin, on the imac which does not reflect my network settings anywhere, and is not what it use to be, i think, it was one value different than the PB.Base station IP. I do not know how it changed neither one of us changed it.
I tried using the Airport Setup assistant (imac), I received this message:
"Appropriate Airport hardware was bot found on this computer,if you recently
Installed, an Airport card,please shut down your computer$ make sure the card is properly istalled."
The imac does not have a card, nor do i think it needs one.
I would like to be able to at least open the configuration file.
Thank you for reading my post.
Eme
Power PC G4 (3.3) iMac♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger Mac OS X (10.4.4)

Hi Kes, a star for the company !
I made an error on my first post I have a Netopia modem, Airport router.
And so it remains, i guess that there must be an easy answer somewhere
that I am missing that I/we should read, some direction to that would be helpful, and I would be very appreciative.
As I said the password had been set, and it is not an issue of that being forgotten, i wondered if it was changed back to "public" tried, not it.
particular because everytime the imac wakes one of the folders on ( no one else in office just me and boyfriend and it is his work folder he has a copy on the PB.( the folder on desk top has been clicked on, the one with sensitve info, i have backed the folder up and secure trashed it, just in case some security issue hacking has taken place, thats closing the barn door after the fact.
Good luck,w/ this Q.
regards Eme
Power PC G4 (3.3) iMac ♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger Mac OS X (10.4.5)

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please help

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

Opening the Excel file from Application server

Hi All,
I had uploaded an excel file on the application server for using it in my program .
But when i am opening the uploaded file on the Application server it shows some special characters and those are also displayed on my report output while reading the file from the application server.
Please suggest how to get rid of those special characters.
my open data set statement is
OPEN DATASET pg_out2 FOR INPUT IN TEXT MODE ENCODING NON-UNICODE.

Hi ,
if it a Excel file ..
do the following..
    OPEN DATASET pg_out2              "appl file
            FOR INPUT IN TEXT MODE
            ENCODING DEFAULT.
    IF sy-subrc EQ 0.
      DO.
        READ DATASET p_infile INTO w_temp.
*       Condition To check when cursor reaches End Of file
        IF sy-subrc EQ 0.
          PERFORM f_split_appl_data.
        ELSE.
          EXIT.
        ENDIF.
      ENDDO.
      CLOSE DATASET p_infile.
    ELSE.
      MESSAGE 'Error in opening file' type 'E'.
    ENDIF.
FORM f_split_appl_data .
SPLIT w_temp AT ',' INTO : wa_inputfile-plannum ......   "Split at , for excel or CSV file formats at appl files
APPEND wa_inputfile TO t_inputfile.
ENDFORM.                    " F_SPLIT_APPL_DATA
Prabhudas

Error message: "Unable to open the physical file" when trying to attach AdventureWorks database

I have searched the internet and this forum and have not found an answer...
I am trying to install the AdventureWorks database into my single instance of MS SQL Server Express 2005. I am logged into my machine as an administrator and logged into SQL Server 2005 express 'sa'. I attempt to run the following script:
exec sp_attach_db @dbname = N'AdventureWorks',
@filename1 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf',
@filename2 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_log.ldf'
The error message I get back is:
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf". Operating system error 5: "5(Access is denied.)".
The folder "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data" and all the files in it are read-write. I am 100.0000% certain the files "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf" and "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Log.ldf" exist! They are the result of running the installation program AdventureWorksDB.msi, which I downloaded from: http://www.codeplex.com/MSFTDBProdSamples/Release/ProjectReleases.aspx?ReleaseId=4004.
What do I have to do to install the AdventureWorkds database????

Hello,
To try to help you, please, could you give some more informations ?
- the operating system (XP/Vista), the edition ( Pro/Home...) and the service pack
- usually, the installer installs the both files in C:\Program Files\Microsoft Sql Server\Samples. Is there any change in the location or have you moved the both files ?
- could you check with the files explorer , that the 2 files are read-write and not read only( find one file, right-click on it, properties and in the 1st tabpage, you should see a checkbox read-only ( if checked , unchecke it ) ?
- have you Sql Server Management Studio Express Edition ( at least SP1 ) ?
If no, download it and use it to attach
in the object explorer,
click on your instance to expand it
right click on databases
in the contextual menu, click on attach
in the new form,click on add
you arrive on a second form : find your file , click on it, and OK
it's the simplest way to attach ( the sp_-attach_db is complicated to type )
the error messages are sometimes more clear in SSMSEE than in Sqlcmd
Try also to attach ( thru SSMSEE or Sqlcmd but in using the windows authentification )
NB: i hope that you are not trying to attach AdventureWorks on a remote instance and on a remote computer ( it would explain access denied )
We are waiting for your feedback to try to help you more efficiently
Have a nice day

Doesn't open the PDF file (i.e. articles, books pages). It appears a black page. Thanks for help

Safari doesn't open the PDF file (articles, book page, etc). It appears a black page. Before that it was working perfectly. Thank for your help

Try this ...
Open a Finder window then from the menu bar click Go > Go to Folder
Type or copy paste the following:
/Library/Internet Plug-Ins
Click Go.
If you see the: AdobePDFViewer plugin (or anything Adobe related) in the Internet Plug-Ins folder, move it to the trash.
Restart your Mac and try opening a PDF file.

Error message when I try to open the "help" files.

When I try to open the help files in Elements Photoshop 10, I get the following error message in a pop up box. At the top, the box is labeled "Adobe AIR" The message: "Application descriptor could not be found for this application. Try re-installing or contacting the publisher for assistance."
I have completely uninstalled and reinstalled both my Elements programs as well as adobe air, and have updated everything that I can think of and a few more things, and still get the same message. Since I am one who often uses help files, I'd appreciate any help with this.
Thank you.
TwoCollieTom

You can directly download the help files from this location http://helpx.adobe.com/photoshop-elements/archive.html

Edit in Photoshop CS4... does not open the selected file.

Sorry if this is an old topic, but I can not seem to find the answer and I was hoping someone here might know.
When in Lightroom (2.2 or 2.3) if I select "Edit in Photoshop CS4..." or any of those dropdown commands, Photoshop opens....and that is it. The selected photo from Lightroom is NOT opened/merged/panoramaized. duuh. frustrating.
So I re-installed Lightroom, updated to the 2.3, re-installed CS4. all with the same effect that Photoshop opens, but the selected file is NOT opened.
Has anyone experienced this? Any solutions?
Thanks in advance.

When you remove the obvious,
that which is left must therefore be the truth -- Sherlock Holmes
Short version:
When I created a new lightroom catalog, and imported a single, standalone file, It worked fine. But when I imported to the new catalog, any photos from my existing catalog, it would fail.
Turns out that I was doing something a bit out of the ordinary with the IPTC Copyright field. In order to make my copyright information look "different" when I would export a file.
One would normally put in that field something like "© 2009 someone". I discovered a few months ago that I could make this field display as a multi line entry.
ie.
if you wanted to put XY into the copyright field, but wanted it to display as:
X
Y
all you would have to do is to put a carrage return between the two characters. (hint ctl^enter). Now when you displayed the "copyright" in an output file, it will display
vertically instead of all the characters in a horizontal line.
After being frustrated by this for a couple of weeks, I simply started removing every option that I might have applied to photographs that I would import with Lightroom. One of the last ones was the "vertical" information I put in the copyright field in a Preset. (when you remove the obvious...).
Funny thing is that no program really cares about the formatting of that field, or if it has multiple lines in the data, or special characters.......It even opens up just fine in Photoshop / Gimp / PSE / etc. with no problems.
But, if you have multiple lines of data in the Copyright Field (and I suspect others as well),
AND you want to open up the file from Lightroom in Photoshop, using the standard menu item of " Edit with Photoshop CS4", for some reason Photoshop will start, but never open the designated file. I would expect some parsing something just giving up after it encounters a CR.
But.....All is well that ends well. Now I can quit obsessing, and move on to something else...
Best,
Jim

I bought an eBook from iTunes. I can view/read it perfectly on my iPhone but when I try to open the eBook file on my iPad, I get the error message, "Cannot open book. This book is protected by an incompatible technology." Any ideas for me? thx

i bought an eBook from iTunes. I can view/read it perfectly on my iPhone but when I try to open the eBook file on my iPad, I get the error message, "Cannot open book. This book is protected by an incompatible technology." Any ideas for me? thx

Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry.

Unable to open the downloaded file

Unable to open the downloaded file:
Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.1.0 -> for Windows x86 -> File2
http://www.oracle.com/technetwork/middleware/performance-management/downloads/hyperion-foundation-1112-086772.html
Error message -
Cannot open file: it does not appear to be a valid archive. If you download this file, try downloading the file again.
Tried many a times and used various unzipping tool.

do not pause the download in the middle of the download.
with some download software, you can pause/stop the download in middle and continue.it will corrupt the software.
else in middle the due to network... it may corrupt.
check/compare the size with the original bytes mentioned in the oracle software download index size matches your downloaded file size.
try to download it again.
Good Luck.

I have photoshop CC. I cannot open two files such as Tiffs and view them side by side. When I open the second file it overrides the first. Do I need to do something with preferences?

I have photoshop CC. I cannot open two files such as Tiffs and view them side by side. When I open the second file it overrides the first. Do I need to do something with preferences?

What happens when you try to use the clone stamp tool?
It should work with the images side by side.
You can setup photoshop cc to be like photoshop cs2 was on your other mac, by going to Photoshop>Preferences>Interface and unchecking
Open Documents as Tabs and Enable Floating Document Window Docking
And also going to Window and unchecking Application Frame

How do I stop more than one user opening the same file?

I'm about to install Lion Server and we're concerned that more than one person will be able to open the same file at the same time. Can this be prevented? If not it seems to make the concept of a server pointless?
Any help appreciated. Already annoyed I have to phone and order 10.7 Server as it's no longer on the App Store. Can't run 10.8 as the Mac Pro is too old and Apple have cut us off.

The file server software supports file locking, but multiple file access is application-dependent. In some cases it's entirely valid for multiple users to access the same file. It's up to the application to allow or deny this.
Ordinarily, if an application requires exclusive access it should flag the file accordingly when it opens the file. This will prevent other users from opening the file. However, it's not up to the server to do this.

Two users opened the same file at the same time with file on Win2K Server

I just had a problem with a file that could not be saved. After a little investigation I discovered that two users had the same file open at the same time. This is with both users using InDesign CS2 and saving to a Windows 2000 Server. Any ideas how this even happened? The only thing I can think of is if they both opened the file at the exact same time but even that I doubt. I guess the more likely possibility is that the user on 10.5 (which we have had a lot of problems with, it's hard to tell how many of them are CS3 problems (yes CS3) and how many are Windows 2003 Server problems) had InDesign CS2 flake out and not tell her the file was open. Has anybody else seen this? The other user was using 10.4. Both computers have the most recent updates for the OS and for their various adobe products.

I have videos on mov file and my quick time player does not play them.
The MOV file container is the generic QT file container. Any audio and video data compatible with the computer system used to create the file can be placed in the MOV file container. Unfortunate, other systems cannot play the file unless they too are configured with the same components as those used to create the file. The normal procedure here is to use the Finder "Info" or alternative media play "Inspector" window to determine what codecs were used to create the original file and, if they are available for your Mac, install them on your system for playback use. Also be advised that some "legacy" codecs may require playback in the QT 7 Player for proper QT support.
I opened with other players, there is no sound. Then I opened the same file on my windows 7, it plays perfectly with the sound and everything? What is the problem?
This would indicate these players either access your QT codec component configuration which does not include the required codec or the app has its own built-in codec support which does not include the required audio codec but you Windows 7 media player is configured with the required codec support. This may incidate the use of a really old codecs that may or may not be available/supported on a Mac any longer.

Mac Word 2008 - hyperlink message "Word cannot open the specified file"

I'm using WordMac 2008 version 12.2.5 and after following detailed instructions on how to hyperlink chapters in a Table of Contents to their respective chapters in a book, I can only get the message "Word cannot open the specified file".
Any ideas what could be wrong?
My OSX is 10.5.1.
The instructions I followed are pasted below and are copied from the Smashwords Style Guide: http://www.smashwords.com/books/view/52
START OF PASTE FROM SMASHWORDS STYLE GUIDE:
How to create a linked Table of Contents. Consider this feature in “beta.” My
thanks to Smashwords author Cheryl Anne Gardner for sharing these tips below,
which I have augmented based on my own experience adding a ToC to the Style
Guide (woo hoo!).
By adding a linked table of contents, you can help readers navigate your
document. This is especially useful for non-fiction. Most fiction doesn’t
need it. If you follow the instructions below, the ToC should work in your
EPUB, MOBI and PDF files, but it will not work in our other formats.
First, create your table of contents where you want it by typing it out. Make
sure the text is normalized just like the rest of your Smashwords’ Word
document. Example:
Contents
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Etc.
Next, we are going to create the BookMarks. In Word 2000, 2003 and 2007, the
Booksmark function is under the Insert tab. Go through your document, and at
each Chapter Start or Indexed item, you will highlight it and then select
Insert: bookmark. Name your bookmark corresponding to the Chapter/Indexed
item and then click add. It’s very important to use the first word of your
heading you’re linking to, because later on, when you add the hyperlinks,
Word displays the bookmark shortcuts in alphabetical order. With many
bookmarks, I found many of my bookmarks weren’t labeled properly, so it was
tough to link to the correct bookmark. If you want to link to a chapter named
How to Publish Ebooks, I’d recommend naming your bookmark
“HowToPublishEbooks” to make it easy to locate. If you instead name it,
“publishebooks,” you’ll frazzle your brain and make mistakes.
Repeat the process above for every Chapter Start as well as for other matter
in the book like index, bibliography, epilogue, prologue, etc. I didn’t link
to every section in the Style Guide, because otherwise the ToC would have
been three pages long. This is your call.
Next, return to your table of contents and highlight the word “Contents.”
Click insert, bookmark, and label this last bookmark “Contents”. Formatting
note: Bookmarks cannot have spaces or odd characters. If instead of
“Contents” you called the label in the document Table of Contents, as I did,
then when you insert the bookmark, name the bookmark “TableofContents,” one
word, or “toc.”
Next, add the hyperlinks to your Chapter Starts. In your table of contents,
if Chapter 1 is called Chapter 1, then highlight Chapter 1 and then click
insert Hyperlink. As you can see in the Style Guide, I tried to use more
descriptive labels. In Word’s Hyperlink menu on the left hand side, select
“Place in this document.” You will now see your bookmarks listed in the main
window. Select Chapter1 bookmark (or whatever you labeled it) and then click
ok. Do this procedure for every chapter and piece of matter in the table of
contents.
Final step. Now you can link back to the Table of contents. Move through your
document to each indexed item or Chapter start and highlight it. Then click
insert, hyperlink, and then select “Place in this document.” When the
bookmarks are showing in the main window, select the bookmark labeled
“Contents,” assuming that’s what you named your Table of Contents. Do this
for each and every chapter and or indexed item.
After you are done, all your links will be underlined. You will need to test
and make sure you linked everything properly. In most Word versions, you just
click on the hyperlink to test. In Word 2007, you may need to Ctrl-Click each
hyperlink and make sure it takes you where you need to go in the document.
Advice: Word has an automatic ToC generation feature under the reference tab.
Do not use this. It uses automated headings and formatting to generate the
ToC and this will un-normalize your text and cause font conversion issues in
your Smashwords files.
END OF PASTE FROM SMASHWORDS STYLE GUIDE.
I did all that as described but I still get the message "Word cannot open the specified file".
Could you help please?

This question would be better addressed to...
http://www.microsoft.com/mac/help.mspx
I think the operative phrase from that article is...
*Consider this feature in “beta.”*
-mj

Opening the Aperature file!

Similar Messages

Maybe you are looking for