Openoffice2 error on save

There is an error saving documents with openoffice2-1.9.118-1. It seems that
/opt/openoffice2/share/basic/FormWizard/ is missing and it complains about missing .xml files from that directory.

Yeah, sorry. I always assume I have some .something file sitting around that is screwing things up. My home directory is a mess.

Similar Messages

When I try to export the file in word, I get the error "The Save as command has not been able to develop this document. Unable to create file"

When I try to export the file in word, I get the error "The Save as command has not been able to develop this document. Unable to create file".
Win7 Pro, 64bit
Acrobat XI Pro, tryal

Create a one word pdf file. Try converting to word. If that fails, try a complete uninstall, run the cleaner tool, then re-install.
Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs

An error occurred: Save document failed / An error occurred while saving the document: PATH (HDB 00055)

Hello Colleagues, I am creating an analysis in build 576, everything goes well, the algorithm calculates the needed values, but when I try to save the analysis, I receive the following error message: "An error occurred: Save document failed / An error occurred while saving the document: <PATH> (HDB 00055)".
Does anyone know what could cause this error message?
Thanks a lot for any hint.
Sergey

Hi Henry,
I am using PA 1.0.11 and received this error; any update on this fix for SAP PA. Does this happen for a particular data source.
I am currently using Excel as source and whenever I try to use this data; I get this even if I move the data to a new file or rename a file. I tried to check the same issue with a different file and it works fine. This file worked fine a day back.
Please let me know if this is unusual for this version.
Regards,
Arvind E

Excel encountered errors during save. however excel was able to minimally save your file to C:\...

Error: Excel encountered errors during save. However, Excel was able to minimally save your file to c:\users\*****\appdata\roaming\microsoft\excel\***.xlsb.
Basically, these are multiple macro enabled spreadsheets from one client. It happens with no other clients who also use macros. They are all saved to our network, which has plenty of space. Any of our users that access these files have the same issue.

Hi
Take following steps to troubleshoot the issue:
Check the Macro and File Blocker settings in the Trust Center.(File>Option>Trust center>Trust center settings)
Then we suggest to perform a clean startup to determine whether background programs are interfering with your Office program.
http://support.microsoft.com/kb/331796
It is recommended that you disable Antivirus application while checking the issue.
Regards
Tylor Wang
TechNet Community Support

Access Privileges error, cannot save library

I have had my iPod for 4+ years but after upgrading software about a year ago, I repeatedly get the error "Cannot save Library. You do not have enough access privileges." I have followed recommendations in previous threads to unmark the read-only button but to no avail. Very frustrating. Please help before I switch to a Zune.

That error is referring to the iTunes Library.itl or .xml file, as explained in this article:
http://docs.info.apple.com/article.html?artnum=93732
WHen are you seeing this error, when you try to close itunes?
Can you rename that file? Because if you can't, the operating system is confused and thinks something has a lock on it. Restarting your PC should clear that situation.

Error while save framework purchase order.

dear all
i am working SAP R/3 4.7 ides while creating framework po, i input all the data field correctly , but when i am going to save the purchase order, it given the error Massages " Indicator for invoice receipt used not allowed
Message no. MEPO026"
then i tell me how i save the po. i request to all the experts

Dear,
What account assignment you are using?
Use account assignment category as K and item category as B Also do not enter material ID.
Now try.
Regards
Utsav

Workbook error 310 - save not possible

Hi,
when I want to save a workbook I receive error message 310 - saving not possible. Nothing in my authorizations where changed. In sdn I found also no hint.
Any idea?

Hi,
Please check out the SAP Notes in the link:----
Error 310 when creating an workbook
REgards,
Suman

Error When Save Message Mapping

Hi evreybody,
I try to save my mapping. I did the test to check to know if everything is ok. The test is executed succesfully but when I try to save, I receive the following error message:
Internal error: Unable to transfer changes for object Message Mapping MM_Order_Idoc | http://accenture.com/PI01/Idoc to change list "Standard Change List" (348cd3a0-f384-11dd-c70e-003005989c0a) since object still in change list "Standard Change List" (faa66160-f699-11dd-8a1b-003005989c0a)
Thank you for your support,
Mohamed.

Release the lock by going to XI Admin page and check Integration repository and lock tab where you can see the objects locked ,release the lock and you can do the needed.
Rajesh

Automater error using Save as Adobe PDF w/ Acrobat 9 on OS 10.7

Hello,
Do you use 10.7 or do you use 10.6?
In my situation, save as Adobe PDF (Acrobat Pro 9) worked perfectly in 10.6 but gives an Automator error under 10.7.

[Something went wrong: my post was a question to WLV_Jim2 (jun 21, 10:56 AM)]
I started all over again:
I erased my hard disk. I installed Lion (again). I installed Acrobat (again). I did all the 19 updates, one by one (agian).
Now it works. Ouf.

ERROR for save a form created in XML Form Builder

Hello everyone:
I am having an error message when I try to save a form in the XML form builder and I donk know what I need to do for fix it.
Warning:
An error occurred when copying temporary files. The saved project state can be opened in the XML Form Builder, but the old state will be generated. The error was: An unexpected error occurred: null.
If anyone knows how to fix it I'll thanks your help!
Tzitzi

Hi, someone can help me with this?

Error with "Save as Adobe PDF" in Word 2008

I have Word 2008 12.2.5 on Snow Leopard 10.6.4. I just upgraded all in one go from Acrobat Pro 9.0.0 to 9.3.3. I went to try out the "Save as Adobe PDF" function, and every time I get an error popup that says "An error occurred while saving the PDF file". The popup includes the OS X "Automator" icon of a robot holding a pipe(?).
First there is a dialog box where I set Adobe PDF Settings: Standard and After PDF Creation: Nothing. I click Continue and a file dialog is next where I choose the output filename, where I click Save, then the error box appears.
Help?
Thanks.

The Save As PDF feature in Office2008 Call up a PDF Creator similar to the AdobePDF Print Driver. whch OX.6 can't use.
To create Pdf you have to use method used:
http://indesignsecrets.com/acrobats-adobe-pdf-printer-replaced-in-snow-leopard.php
Not before you attempt to use this method if Rossetta is not installed. pop in your Systems DVD and install Rosetta. Then follow directions to install the Adobe Quality PDF Automator Script which will show up in the Print Menu. Click on Print > then click PDF. Then Click on Adobe quality PDF. AS for setting up Job options and other details Supposedly your suppose to have access. But I have no idea.
First thing Rosetta should be installed out of the box. and Second Adobe should install this Script from their installer. So their should be no intervention from the user. it should just work. Early report when OSX.6 first came out almost no one was able to get this to work. and I see periodic reports that people still can't get it tork and they have to to resort to saving as .ps files then droping on distiller.
Good luck.

Acrobat X Pro Error when Save As JPEG: Insufficient Disk Space to Perform Operation

Using Acrobat X Pro when trying to save a PDF as an Image - JPEG format, the Acrobat application fails with an error: "Acrobat could not save a page in this document because of the following error: Insufficient disk space to perform the operation (Page 1)". Please help with a solution to this problem. The problem is not because of insufficient disk space on my PC.

Thank you for the reply.
Please can you help with the location of the TEMP folder and which temporary files to delete (file type/extension). Each of the these folders include an "Adobe" Folder. Each "Adobe" folder size is less than 1MB.
I am using Windows 8.1 Enterprise 64-bit. I have the following Adobe Acrobat applications installed: Distiller X, X Pro and Reader XI. Is this combination perhaps causing the problem?

Error: Cannot save DataSource 3.x

Hi All, We are on BI 7.0 support pack 20. I am getting the below error while running the program RSTCC_ACTIVATEADMINCOCKPIT_NEW to intall/activate the Admin Cockpit.
Cannot save DataSource 3.x 0TCTBWOBJCT_ATTR(STG-010)
Message no. RSAOLTP077
Diagnosis
Cannot save DataSource 3.x (R3TR ISFS) on the database, since a DataSource (R3TR RSDS) already exists with the same name.
Procedure
If you want to recreate the DataSource, choose a different name.
Thanks!
Puneet

I tried restoring the DataSource from my ECC system and the error I received was:
Creation of DataSources for SAP source system
(SourceSystem) is not permitted.
I clicked on the ? mark and recieved this following information
Creation of DataSources for SAP source system (SourceSystem) is not permitted
Message no. RSDS057
Diagnosis
You want to create a DataSource in a replicating source system (SAP source system, BI system, Myself system).
System Response
You cannot directly create DataSources for replicating source systems in BI.
The system terminates the process.
Procedure
Create the DataSources for the replicating source systems in the source system itself (SAP source system, BI system, Myself system) using Customizing Extractors (transaction SBIW).
When you replicate the DataSources to the BI system, the system displays them in theDataSource tree in the Data Warehousing Workbench.
I am getting the exact error as the original poster (Cannot Save DataSource 3.x) but am not able to resolve it. Any other ideas? when I say I try to restore the DS, I click on Create in RSDS

Error when save date in SQL database

Hi all,
I try to save a date in to a sql database, but when I run my program I get following error:
Invalid object 11/21/05 9:32 AM of type java.sql.Date assigned to host variable 3.
In my database table I have a fields date (type Data)en time type(Time).
this is the source:
     public void createTitle(int title_id, String description, String user)
          throws SQLException {
          // TODO Auto-generated method stub
          Date date = new Date();
          String dateFormat = "YYYY-MM-DD";
          String timeFormat = "HH:mm:ss";
          SimpleDateFormat ddf = new SimpleDateFormat(dateFormat);
          SimpleDateFormat tdf = new SimpleDateFormat(timeFormat);
          String det = ddf.format(date);
          String creationTime = tdf.format(date);
          PreparedStatement newTitle = conn.prepareStatement("INSERT INTO BE_TITLE (TITLE_ID, DESCRIPTION, DATE_CREATE, TIME_CREATE, USER_CREATE) VALUES (?,?,?,?,?)");
          try{
               newTitle.setInt(1,title_id);
               newTitle.setString(2,description);
               newTitle.setDate(3, new java.sql.Date(date.getTime()));
               newTitle.setTime(4, new java.sql.Time(date.getTime()));
               newTitle.setString(5, user);
               newTitle.executeUpdate();
          }finally{
               newTitle.close();
Can someone give me a solution for this error
Richard

Hi Richard,
in your application, you atempt to insert a java.sql.Date value into a DATE column, which has non-zero time-components. Open SQL rejects such an atempt.
Please allow me to quote from the OSS message (452727 2004), which Detlev refers to in his quote:
<i>
about one year ago, we had a very lengthy discussion on this issue - not only internally at SAP but also with Jonathan Bruce, the specification lead for JBDC at Sun.
We have the following dillema:
The javadoc of the constructor java.sql.Date(long) states:
"If the given milliseconds value contains time information, the driver will set the time components to the time in the default time zone (the time zone of the Java virtual machine running the application) that corresponds to zero GMT."
With Jonathan Bruce, we tried to clarify when this normalization should take place.
1) Source code inspection shows that it is not the class java.sql.Date the performs the normalization.
2) The Javadoc states that the JDBC driver should perform the
normalization. If it is the driver, more open questions arrise:
a) When shall the normalization be performed?
   - if a setDate method is invoked?
   - only for INSERT and update statements or also for all other parameters?
   - shall the getDate method perform the normalization?
   - what about set/getObject?
   - the java Docs of set/getDate don't tell anything about normalization.
   - according to which time zone shall the value be normalized?
     - UTC
     - vm time zone?
     - database time zone?
3) If an automatic normalization is performed, data will be modified upon insertion (or extraction) from the database. This means that we cannot quarantee if we insert and Date object retrieve it again that the two objects will be equal.
In the discussion with Jonathan, we couldn't clarify the issue. However, Jonathan promised that the JDK should be modified in such a way that the JDK is responsible for the normalization. (So far such a change has not been done).
In order to be on the safe side, SAP chose that Open SQL should reject any Date values that are not normalized. This is what we have
implemented and documented. I agree, that in this repect, Open SQL is stricter than the JDBC standard demands.
To help the application with the task to normalize a Date (and Time) object, we offer the helper class
com.sap.sql.DateTimeNormalizer which you find in opensql.jar.
To come to a conclusion, the bevavoir you observed is from our side not a bug of Open SQL but a feature. Please use DateTimeNormalizer to normalize Date objects appropriately.
</i>
I hope, you can follow our reasoning.
Best regards,
Adrian

List of error to "Save all Metadata"

Hi,
before restart my machine, when I changed the bind of the context of a custom controller, NWDS reported the possible errors also clicking "SAVE ALL METADATA";
after restart, to report these errors i must "Rebuild project".
The "Rebuild" is an operation very long, someone knows how return to the previous situation ?
thanks in advance

Hi.
I have two tips that might relate to what you are asking.
1.
When you do changes to a webdynpro project. The changes are done in xml-file and corresponding java-files are generated.
Errors and warnings are usually derived from the generated java-files.
In some cases when the studio is restarted or interrupted so that the generation of java-files fails, you would get inconsistency between the xml-files and the generated java-files.
If you reload the project, all java-files are removed. It is also possible to remove all generated java-files manually (in the navigator tab) and then rebuild the project.
2.
NWDS or Eclipse loads all open project into memory. It's therefor advisable to have as few open projects as possible. This improves performance very much.
However, if you close a project and then open it again, Eclipse is forced to reload the project into memory. This can solve a lot of problems when you get error of missing dependencies to generated classes.
If you experience trubble with NWDS that you think should work, try the following:
closing-opening the project
reload the project
rebuild the project
remove all generated files (in "gen*" directories)
Regards, Mikael

Openoffice2 error on save

Similar Messages

Maybe you are looking for