Operating system support (standard and enterprise ) in OBIEE 11g

Hi
Can any one help me in whether OBIEE 11g installation will be possible in both standard & enterprise edition operating system of windows server 2003 and windows server 2008 or not.
Thanks in advance.

OBIEE 11g is an application which runs on the Weblogic Application Server. Then if the windows plateform are supported for Weblogic, OBIEE 11g is also supported.
I assume that you talk about Standard Edition one and Enterprise Edition.
http://gerardnico.com/wiki/_detail/dat/obiee/obi_edition.jpg?id=dat%3Aobiee%3Astart
When we talked about Standard Edition on 10g, it was not about Oracle BI but on Discover for the reporting plateform.
If you want to be really sure, you can ask it to your representative sale.
Cheers
Nico

Similar Messages

  • Oracle 10g/11g - Operating system support info required

    I want to know all the operating systems supported by oracle 10g and 11g. I searched through oracle tech. center, but failed to find this information.
    I want to know if oracle (10g/11g) is supported on Linux S/390?
    Thanks
    Mac

    Did you go through the certification matrix?
    http://www.oracle.com/technology/support/metalink/index.html

  • Windows 2008 Licensing - Standard and Enterprise Edt - No of License required

    Hello All  , 
    We have a Windows Environment running on VMware (ESXi5.1), running Windows 2008 Standard and Enterprise platforms . We are working on the no of license that is required  for each category . Can you help us in licencing calculation for each environment
    .Below is the split 
    Windows 2008 R2 Standard Edt.
    ESX Cluster 1 
    Total No of ESX Hosts :4 
    Total No of Windows 2008 R2 Std Edt VMs : 9   // How many license req ? Calculation 
    Total No of Windows 2008 R2 Ent Edt VMs : 6    // How many license req ? Calculation 
    ESX Cluster 2 
    Total no of ESX Hosts : 3 
    Total No of Windows 2008 R2 Std Edt VMs : 13  // How many license req ? Calculation 
    Total No of Windows 2008 R2 Ent Edt VMs : 6   // How many license req ? Calculation 
    Appreciate your support 

    Hi Sathish,
    I would recommend you to contact the Microsoft Volume Licensing Service Center at the following
    Microsoft website. They are the experts and can guide you with the proper license requirments.
    https://www.microsoft.com/licensing/servicecenter/
    Find your local Volume Licensing Service Center support contact information below. Select your country from the drop-down list and the correct Support Center will
    be displayed at right.
    https://www.microsoft.com/licensing/servicecenter/Help/Contact.aspx
    Regards,
    Rafic
    If you found this post helpful, please give it a "Helpful" vote.
    If it answered your question, remember to mark it as an "Answer".
    This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

  • Operating system support for km

    I want to know if knowledge management and collaboration have multiple operating systems support. Please help

    Yes, they do (it's a Java based server, after all). See also https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=/forums/sdn_jive_forums/thread{74687265616449443d313435333535}.jspa.
    Best regards, Julian

  • What operating system supports apple powerbook G4?

    What End operating system supports apple powerbook G4?
    thank you
    iAzem

    rogerfromchatlottesville wrote:
    Hey, where do you get the version for OSX 10.4.11?  All I can find is for 10.5.2 or later.
    Thanks
    Tiger install DVDs are in short supply. Do a Google search for MA453Z/A (10.4.6), MA190Z/A (10.4.3) and M9639Z/A (10.4). Also look on eBay. Be sure & buy a retail version and not a model specific version (gray) (See http://discussions.apple.com/thread.jspa?threadID=1976068 Can I use another Mac's system restore disc on my Mac?.
    After you install the base 10.4.x, update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
    Look at this link Mac OS X v10.4 Tiger Installing Software Support Page
    http://www.apple.com/support/tiger/install/
    You can also download the Tiger Installation and Setup Guide
    http://manuals.info.apple.com/en/Tiger_Install_Setup_Guide.pdf
    When you upgrade the OS, do it via Archive & Install. See About the Archive and Install feature http://support.apple.com/kb/HT1710
    Be sure to select Preserve Users & Settings. Also, repair permissions before and after the install.
     Cheers, Tom

  • HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

    Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

    If you look at the User Tips tab, you will find a write up on just this subject:
    https://discussions.apple.com/docs/DOC-4053
    The subject of buying/selling a Mac is quite complicated.  Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
    SELLING A MAC A
    Internet Recovery, and Transferability of OS & iLife Apps
    Selling an Old Mac:
    • When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
    • Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
    Internet Recovery:
    • In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
    • Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
    iLife Apps:
    • When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
    • Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
    • It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
    SELLING A MAC B
    Follow these instructions step by step to prepare a Mac for sale:
    Step One - Back up your data:
    A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
    B. Clone to an external drive using using Carbon Copy Cloner.
    1. Open Carbon Copy Cloner.
    2. Select the Source volume from the Select a source drop down menu on the left side.
    3. Select the Destination volume from the Select a destination drop down menu on the right
    side.
    4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
    sure to opt for that.
    Destination means a freshly erased external backup drive. Source means the internal
    startup drive. 
    Step Two - Prepare the machine for the new buyer:
    1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
    2, Remove any Open Firmware passwords or Firmware passwords.
    3. Turn the brightness full up and volume nearly so.
    4. Turn off File Vault, if enabled.
    5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
    Step Three - Install a fresh OS:
    A. Snow Leopard and earlier versions of OS X
    1. Insert the original OS X install CD/DVD that came with your computer.
    2. Restart the computer while holding down the C key to boot from the CD/DVD.
    3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
    Optionally, click on the Security button and set the Zero Data option to one-pass.
    4. Install OS X.
    5. Upon completion DO NOT restart the computer.
    6. Shutdown the computer.
    B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because
    it is three times faster than wireless.
    1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
    Utilities window appears.
    2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button. 
    3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
    on the Erase tab in the DU main window.
    4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
    and set the Zero Data option to one-pass.
    5. Click on the Erase button and wait until the process has completed.
    6. Quit DU and return to the Mac OS X Utilities window.
    7. Select Reinstall Lion/Mountain Lion and click on the Install button.
    8. Upon completion shutdown the computer.
    *If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

  • What's the difference between Standard and Enterprise?

    Hi,
    I want to download oracle 8i for linux,and I don't know
    what's the difference between the standard and enterprise
    version. Can anyone give me the answer? Thanks a lot.
    forfun
    null

    forfun (guest) wrote:
    : Hi,
    : I want to download oracle 8i for linux,and I don't know
    : what's the difference between the standard and enterprise
    : version. Can anyone give me the answer? Thanks a lot.
    : forfun
    Enterprise vs Standard : technical view
    If you install Enterprise you must:
    - install Enterprise whith all the modules
    - apply the patch 8.1.5.0.1
    (if all the modules weren't installed, the patch fails because
    he tries to relink non installed products)
    If you install Stardard you must:
    - install Standard
    - no patch required !
    Enterprise vs Standard : package
    Standard is good enougth for a lot of purposes. It includes
    TextRetrival, Java inside the database, etc.
    With Enterprise, you can by additional products like Spatial
    data, Time Series, etc.
    Hope this helps,
    Thanks to Yann Doussot for these informations
    Gilles
    http://perso.club-internet.fr/gbriard
    null

  • Diffences between 9i Standard and Enterprise edition

    Can anyone give me the Diffences between 9i Standard and Enterprise edition. Is there any document available for this.
    Thanks,
    Sunil.

    Here's the Oracle white paper on the subject...
    http://otn.oracle.com/products/oracle9i/pdf/9idb_rel2_prod_fam.pdf
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • Differences in 10g Standard and Enterprise Editions

    I found on the matrix of items enabled in 10g standard and enterprise edition that the standard edition does not have Oracle Data Guard, but it does have standby database. For a standard edition database with a standby database configured (manually since the GUI isn't available in STD either), do you have to manually copy the log files to the standby server, or will this automatically be done using standard edition?
    Thanks,
    Jim

    Can you use a standby database using standard edition?

  • 10.2.0.4 to 11.2.0.4 standard and enterprise

    Hello,
    We are on 10.2.0.4 (standard and enterprise) version on windows 2003 and we wan to upgrade to 11.2.0.3 or 11.2..0.4? I want to understand which one is the best method? Also upgrade procedure for standard and enterprise would be same?
    We can afford 2- 3hours of downtime
    our database sizes are
    300 GB Standard
    200 enterpeise
    3 Tb enterprise
    Please help

    Always test the upgrade process on a test database (cloned from production) on identical hardware. 3-4 hours is do-able if you -
    1. install and patch the 11.2.0.4 software in advance
    2. Use DBUA
    3. follow all of the recommendations in MOS Doc 455744.1
    4. test the upgrade process multiple times to anticipate/correct all issues and minimize downtime
    HTH
    Srini

  • I have owned a Photoshop Element 4.0  Then I change my operating system to Maverick, and after that

    I have owned a Photoshop Element 4.0
    Then I change my operating system to Maverick, and after that it will not work.
    I remove the application and try re-installing but just before is completed I receive a massage saying that: “ Installation failed”: Installer encounter an error that cause the installation to failed. Contact software manufacturer for assistance. I went to adobe help chat and they send me here. Can any one help me to re-install my adobe again? Thanks!!!

    Dear  All:
    I must inform you  that this account is no longer being  use.   I request for you to delete this account from your contacts. Please reach me by email at: [email protected]
    Kind regards,
    Marcela Carmona A.
    Este correo ya no está en uso: Por favor bórrelo de su lista de contactos. Por favor escríbame a:
    Mi nuevo correo:
    [email protected]
    ATTE,
    Marcela Carmona A.

  • I have a MAC, Ive just installed OS10.10.3 operating system in it and I can't open Photoshop.  This is a wide spread problem that involves Java and Photoshop software.  Since you produce both these products , I turn toward you to direct me to the best "Fi

    I have a MAC, Ive just installed OS10.10.3 operating system in it and I can't open Photoshop.  This is a wide spread problem that involves Java and Photoshop software.  Since you produce both these products , I turn toward you to direct me to the best "Fix"?

    Go here Mac OS X Yosemite (10.10) compatibility FAQs | CC

  • Differences between operational systems data modeling and data warehouse da

    Hello Everyone,
    Can anybody help me understand the differences between operational systems data modeling and data warehouse data modeling>
    Thanks

    Hello A S!
    What you mean is the difference between modelling after normal form like in operational systems (OLTP) e. g. 3NF and modelling a InfoCube in a data warehouse (OLAP)?
    While in a OLTP you want to have data tables free of redundance and ready for transactions meaning writing and reading few records often, in an OLAP-system you need to read a lot of data for every query you do on a database. Often in an OLAP-system you aggregate these amounts of data.
    Therefore you use another principle for these database scheme. This is called star schema. This means that you have one central table (called fact table) which holds the key figures and have keys to another tables with characteristics. These other tables are called dimension tables. They hold combinations of the characteristics. Normally you design it that your dimensions are small, so the access  on the data is more efficent.
    the star scheme in SAP BI is a little more complex than explained here but it follows the same concept.
    Best regards,
    Peter

  • Certified operating systems for 32bit and 64 bit with bussines intelligence

    Hi,
    Pls can you tell me where I can find the list of certified operating systems for 32bit and 64 bit with bussines intelligence standart edition1.
    thank you in advance,
    Denis

    Check the documentation:
    http://www.oracle.com/technetwork/middleware/real-time-decisions/downloads/bi-se1-089899.html
    regards
    John
    http://www.obiee101.blogspot.com/

  • I found the operating system very confusing and hard to use. No tutorial. Manual and online help were outdated.  Tool bars, programs and documents randomly appeared and disappeared. Programs I installed completely disappeared. Anyone else experience this?

    I found the operating system very confusing and hard to use. No tutorial. Manual and online help were outdated.  Tool bars, programs and documents randomly appeared and disappeared. Programs I installed completely disappeared. Anyone else experience this?

    No need to apologize, Jim.  I think your rant was justified.  For years people have been telling me how easy the Mac was to use.  Imagine my frustration when I finally learned from friends and users that it takes weeks or months to make the transition from Windows to Mac.
    Still, I agree that I acted to too hastily when I returned my mini-mac to the store only three days after I bought it.
    I'm going to try again, this time with an iMac.  This time I'll keep it.  Since this thread is for the mini-Mac only, I'll probably be starting a new one for the iMac.
    Why did I decide to try again?  Well, I do like the faster speed and compact hardware of the Macs.  I also like the fact that I can install Windows and use that for my programs until I transition completely to Mac, IF I make the complete transition.
    Thank you all for your suggestions and advice.  I have paid attention to what you said.
    Andy

Maybe you are looking for

  • XML Publisher to generate Excel reports

    Can we use RTF template to generate Excel reports? Is all the process the same or do I need to do some additional set ups? Also, can I create a custom report , set the output format to xml and run XML Publisher on the top of it to generate output of

  • Execute Process Task showing all the SSIS Config variables in SQL Job History

    Hi, Am using an Execute Process task to execute my child package. And executing the Parent package from a SQL JOB. I am using the same config file for both Parent and Child packages. After the Job execution was Successful / Failure, in Job history it

  • Xperia Z1 4.4.4 Update Issues (14.4.A.0.155 and .157)

    Well, our much anticipated 4.4.4 has join the party. But unfortunately I found a bug already in my quite new Xperia Z1 which I  bought 10 days ago & updated last night to 4.4.4 from 4.4.2.   Found a problem. I don't know whether this is only in my ph

  • My ipad was stolen and I didnt have an icloud, I want to block my personal information

    Please help me. I want to block my personal information because my ipad was stolen, i didnt create an icloud because I just bought it one week ago

  • Rule to resolve an alert

    I understand that alerts generated using rules cannot be auto-resolved, unlike alerts generated from monitors. However, is it possible to write a rule which resolves alerts? I am writing a management pack where I generate alerts when a particular WMI