Operator LIKE with SCAPE

I'm using the operator LIKE on a query with the ESCAPE option to.
I really dont understund according to the manual, the meaning of the ESCAPE commmand option.
I apreciated if somebody could explaim me this option and an simple example of how to use it.
Thanks a lot

if you have this data
<pre>
num val
1 hello_there
2 hello there
3 hellomthere
4 hello%there
5 hello you there
select * from table where val like 'hello%there'
will return all rows
select * from table where val like '%hello\%there' escape '\'
will return only row 4
select * from table where val like 'hello_there'
will return rows 1, 2, 3 and 4
select * from table where val like 'hellox_there' escape 'x'
will return row 1
-d

Similar Messages

  • How to create sql query for item master with operator LIKE with variables?

    hi all,
    How to create sql query for item master with
    operator LIKE(Contains,Start With,End With) with variables using query generator in SAP B1 ?
    Jeyakanthan

    Hi Jeyakanthan,
    here is an example (put the like statement into the where field)
    SELECT T0.CardCode, T0.CardName FROM OITM T0 WHERE T0.CardName Like '%%test%%'
    The %% sign is a wildcard. If you need start with write 'test%%' and otherwise ends with '%%test'. For contains you need '%%test%%'. You also could combinate this statements like 'test%%abc%%'. This means starts with test and contains abc.
    Regards Steffen

  • Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...)

    ''duplicate of https://support.mozilla.com/en-US/questions/905881''
    Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...)

    Hi Kossa,
    You can also check if the issue occurs in
    Clean Boot. If the issue disappears in the Clean Boot environment, you can continue to narrow down which entry is causing the issue.
    Besides, uninstall it and re-download
    a fresh copy of FireFox to check the result. If the issue still exists, create a new user account to see if it occurs.
    If the issue persists, you can contact Mozilla Support directly and use Internet Explorer (IE) during the time.
    J
    Please Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise,
    regarding this product's performance or reliability.
    Regards,
    Linda

  • Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...) Thanks,

    Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...) Thanks,

    Hi O_H_I_O,
    Have you got an error code ?
    Considering it is a brand new machine ,please update the machines .To get a better performance of the machines ,we should always keep it up to date .
    There is a possibility that the DVD/CD-ROm drives driver is old or has corrupted .Please open the device manager , update or reinstall the driver to have a check.
    Apart from this ,we can run the built-in tool to a diagnostic :
    Control Panel\All Control Panel Items\Troubleshooting\All Categories\Hardware and Devices
    We also can run the following fixit tool to have a check.
    Fix problems with CD or DVD drives that can’t read or write media
    http://support.microsoft.com/mats/cd_dvd_drive_problems
    Best regards

  • Logical operator 'like'

    I have a small query where I have to retrieve vendor details not including the vendors starting with '9'.
    I have written the below query for that.
    select b~lifnr  " Vendor number
         into corresponding fields of table gi_output_vendors
    from  lfa1
    where  lifnr   not like  '9%'.
    But the output I am getting contains vendor numbers '0000950000' where I wanted to eliminate these type of numbers also. i.e, I don't want to consider leading zeroes.
    So, the below code I have written for that.
    The problem is with if condition or delete statement  'like' logical operator is not being allowed.
    loop at gi_output_vendors into wa_output_vendors.
    shift wa_output_vendors-lifnr left deleting leading '0'.
    if wa_output_vendors-lifnr like '9%'   " didn't work delete gi_output_vendors from wa_output_vendors   where
                  lifnr like '9%'. "didn't work
    endif.
    endloop.
    When I use 'like' with 'if' condition or 'delete' statement, I am getting error saying that 'Like operator is not allowed'.
    How could I deal with this situation.
    Thanks in advance.
    Vishnu Priya

    If you can guarantee the 9 will always be in the same place then it would be better to use offset logic or something like 'lifnr NOT LIKE '00009'' - incidentally, I believe the % wildcard only replaces one character so '9%' will be looking for a 2 char string containing a 9 followed by ONE other character.  Using '9' will look for a 9 followed by any number of other characters. Since lifnr is a 10 char field (according to your example) '9%' will always fail. I would suggest using the Data Browser (SE11) selection screens to try out some of the possibilities and see what works.
    Hope that's of some help!
    Andy
    By the way, I wouldn't recommend using '9' becasue this will look for a 9 <b>anywhere</b> in the lifnr field i.e. it could exclude a perfectly valid number just because it ends in a 9!
    Message was edited by: Andrew Wright
    Sorry, ignore me, in SQL you should use % and not * for multiple characters.  However, the same applies if you can guarantee the position of the 9.
    Message was edited by: Andrew Wright

  • No way to publish a workflow, I get this error: System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.ScopeInactiveException: Scope ... is not in an active state. Its current state is 'Unregistering'

    Hi,
    I'm using Project Server 2013 and I'm not able to publish a workflow in SharePoint Designer 2013, I get this error:
    System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.ScopeInactiveException: Scope '/SharePoint/default/d7feb9ea-ccb2-4ec3-8f89-2a45b6cf3777' is not in an active state. Its current
    state is 'Unregistering'. HTTP headers received from the server - ActivityId: c47ef567-8c54-4ae0-9a1a-1e4fb51320d8. NodeId: TestServer. Scope: /SharePoint/default/d7feb9ea-ccb2-4ec3-8f89-2a45b6cf3777. Client ActivityId : c6e5979c-20f8-e042-1f9d-2cb2a25d7f9e.
    ---> System.Net.WebExceptio
    The thing is that I transferred the databases from a Prod.Env. to the Test Env. and from that moment on the Test Env. stopped working (only workflows), then I
    was thinking that maybe the workflow is not working in the Test Environment because when I transferred the databases from Prod Env to Test Env I didn’t transfer the databases related to workflow, I only transferred:
    WSS_Content
    PWA_ServiceDB
    But I didn’t transfer:
    SBGatewayDatabase
    SBManagementDB
    SBMessageContainer01
    WFInstanceManagementDB
    WFManagementDB
    WFResourceManagementDB
    I didn’t transfer them because, before, when I transferred DB’s in version 2010, these DB’s were not needed, as the workflows were done using another method.
    So, I tried to create a new workflow in the Test Env. but there is no way, I always get that error.
    I've tried to Register again the workflow, and the result looks ok, but it doesn't solve the problem:
    Register-SPWorkflowService
    –SPSite "http://whatever/PWA"
    –WorkflowHostUri "http://TestServer:12291"
    –AllowOAuthHttp -Force
    Do you know how to solve this issue or have an idea to give me some light?
    Thank you for your help and regards,
    José Espases

    Looks like you haven't defined the WF scope or the site where you are trying to deploy the workflow to isn't included in the scope
    Check this article
    http://fangdahai.blogspot.in/2013/04/on-premise-windows-workflow-server.html
    Thanks | epmXperts | http://epmxperts.wordpress.com

  • While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0"

    Hi,<BR>While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0" and not allowing any of the changes. I am not able to open the forms giving the error as "Fiscal Days Input - is invalid". Interestingly one form was opening, when the Page selection is changed it also started giving error as like "Fisacal Days Input(form name) - is invalid check log for details". <BR>Pls advice us that what is this error and how to resolve this.<BR><BR>And Which log is to be referred for the details.<BR><BR>Thanks<BR>Ravi

    If a form is invalid it generally means that one of the dimension references is missing.<BR><BR>Can you get in to edit the form?<BR>If you can, see if you can preview it. I suspect you will not be able to.<BR><BR>If not, check all dimension boxes have at least one member against them.<BR>If you have multiple rows and/or columns check all of them too.<BR><BR>I've had a couple of forms in dev "drop" a dimension reference but only once or twice so not enough to reproduce or find out what is causing it. Each time I got the "form invalid" error message and managed to fix it.<BR><BR>Hope this helps.<BR>

  • Safari, chrome and firefox cannot verify identity of secure websites after upgrading to 10.7.4,  apple engineers have tried multiple things including operating system with no success

    safari, chrome and firefox cannot verify identity of secure websites after upgrading to 10.7.4,  apple engineers have tried multiple things including operating system with no success

    There are several threads about this problem, most notably one called 'Invalid Certificates' is over 4 pages long.  Many of us have experienced difficulty connecting to banking and other secure sites.  On my Macbook Pro, I cannot get to my banking site with any browser, however I can get there on my iMac using Safari, but get the 'Invalid Certificate' notice with FF and Chrome.  The problem started after the installation of 10.7.4.  I have sent a message to Apple--they will be dismayed to hear that I cannot complete an order at their online store!

  • HT1923 I have a Vista Operating system with 2 users.  Somehow I got two different play lists each with one user.  One is too big for the storage and has a vast amount of duplicates.  Can I delete the one that is twice as large and then access the other li

    I have a Vista operating system with 2 users.  Somehow I got two diffent libraries for the users.  How can I delete the one and then access the correct library on the other users profile?

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • Error when deploying EAR file: Operation failed with error: java:/app/jdbc/

    I created application using JDeveloper 11g, and have the deploy file EAR read to deploy to oracle application server 10g, but I am encouting the error of Operation failed with error: java:/app/jdbc/jdbc/HRConnDS not found
    Below is the log. What did i do wrong? I have created the datasource of HRConnDS, and it shows in EM.
    Nov 6, 2009 10:06:12 AM] Application Deployer for hra1 STARTS.
    [Nov 6, 2009 10:06:12 AM] Copy the archive to /u01/OraHome_app1/j2ee/home/applications/hra1.ear
    [Nov 6, 2009 10:06:12 AM] Initialize /u01/OraHome_app1/j2ee/home/applications/hra1.ear begins...
    [Nov 6, 2009 10:06:12 AM] Unpacking hra1.ear
    [Nov 6, 2009 10:06:12 AM] Done unpacking hra1.ear
    [Nov 6, 2009 10:06:12 AM] Unpacking webapp2.war
    [Nov 6, 2009 10:06:12 AM] Done unpacking webapp2.war
    [Nov 6, 2009 10:06:12 AM] Initialize /u01/OraHome_app1/j2ee/home/applications/hra1.ear ends...
    [Nov 6, 2009 10:06:12 AM] Starting application : hra1
    [Nov 6, 2009 10:06:12 AM] Initializing ClassLoader(s)
    [Nov 6, 2009 10:06:12 AM] Initializing EJB container
    [Nov 6, 2009 10:06:12 AM] Loading connector(s)
    [Nov 6, 2009 10:06:12 AM] Starting up resource adapters
    [Nov 6, 2009 10:06:12 AM] application : hra1 is in failed state
    [Nov 6, 2009 10:06:12 AM] Operation failed with error: java:/app/jdbc/jdbc/HRConnDS not found
    Thank you very much for your help.

    How did you create your datasource, can you post the content, without passwords of course.
    Greetings.

  • In Messages, how can I get the most recent entries to appear on top, like with my emails?  Thanks!

    In Messages, how can I get the most recent entries to appear on top, like with my emails?  Thanks!

    HI,
    A Note.
    Technically the most recent Conversation (or Chat) that has a new message (be it iMessage or IM) will move to the top in the list on the left if it is set in the View  Menu to do so.
    Obviously this does need more than one Conversation or Chat to be listed to work.
    It does not change the focus of the Chat/Conversation you are viewing.
    iChat - the forerunner naver had an option to invert the chats.
    The iChat Feedback page is where I use.
    You will also see it does not list iChat 6 depsite listing Lion.
    In this sense it has always beeen out of step on the iChat/Messages version front  (it took me a long time via the Lounge and Host help to get it on the list of pages to be updated on New OS versions)
    11:00 PM      Friday; June 28, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Relational operator LIKE is not supported.

    Hi friends,
    I am trying to write a routine in bw.  I am using LIKE pattern.
    But it is giving the below error.
    "E:Relational operator "LIKE" is not supported."

    hi,
    can you post your code and mention what do you want to achieve?
    thanks
    ec

  • [DC2] An net use or LsaPolicy operation failed with error 67 - Moving AD from 2003R2 to Server 2012

    Hello, i hope someone can help me with this tricky situation.
    The plan is to move AD from 2003R2 name "DC" to a server 2012 "DC2"
    I have made all the adjustments and transferred all the role to the new 2012 server, and both are now GC servers.
    The problem is "transferring" the netlogon share.
    in DCDIAg on the new server i get:
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = DC2
       * Identified AD Forest. 
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\DC2
          Starting test: Connectivity
             ......................... DC2 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\DC2
          Starting test: Advertising
             ......................... DC2 passed test Advertising
          Starting test: FrsEvent
             There are warning or error events within the last 24 hours after the
             SYSVOL has been shared.  Failing SYSVOL replication problems may cause
             Group Policy problems. 
             ......................... DC2 passed test FrsEvent
          Starting test: DFSREvent
             ......................... DC2 passed test DFSREvent
          Starting test: SysVolCheck
             ......................... DC2 passed test SysVolCheck
          Starting test: KccEvent
             ......................... DC2 passed test KccEvent
          Starting test: KnowsOfRoleHolders
             ......................... DC2 passed test KnowsOfRoleHolders
          Starting test: MachineAccount
             ......................... DC2 passed test MachineAccount
          Starting test: NCSecDesc
             ......................... DC2 passed test NCSecDesc
          Starting test: NetLogons
             Unable to connect to the NETLOGON share! (\\DC2\netlogon)
             [DC2] An net use or LsaPolicy operation failed with error 67,
             The network name cannot be found..
             ......................... DC2 failed test NetLogons
          Starting test: ObjectsReplicated
             ......................... DC2 passed test ObjectsReplicated
          Starting test: Replications
             ......................... DC2 passed test Replications
          Starting test: RidManager
             ......................... DC2 passed test RidManager
          Starting test: Services
                NtFrs Service is stopped on [DC2]
             ......................... DC2 failed test Services
          Starting test: SystemLog
             ......................... DC2 passed test SystemLog
          Starting test: VerifyReferences
             ......................... DC2 passed test VerifyReferences
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test
             CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test
             CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : dom1
          Starting test: CheckSDRefDom
             ......................... domain passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... domain passed test CrossRefValidation
       Running enterprise tests on : domain.xxxxx.no
          Starting test: LocatorCheck
             ......................... domain.xxxxx.no passed test LocatorCheck
          Starting test: Intersite
             ......................... domain.xxxx.no passed test Intersite
    I have as a last option the burflags issue, i tried this with the option D2, but i think i have done it wrong, because the netlogon share is gone on the old DC. i took a backup of the files and folders before
    i did this. http://support.microsoft.com/kb/290762/en-us But i am a little confused on which server i am going to set the D4 value on now? COuld someone help? Best regards Aksel

    Hello Dirk
    And thank you for your answer, in regards of the KB, do i have to follow the steps regarding:
    Global vs. replica set specific reinitialization
    You can locate the replica set specific
    BurFlags
    registry key by determining the GUID for the replica set that you want to configure. To determine which GUID
    corresponds to which replica set and configure a restore, follow these steps:
    Click Start, and then click Run.
    In the Open box, type cmd and then press ENTER.
    In the Command box, type net stop ntfrs.
    Click Start, and then click Run.
    In the Open box, type regedit and then press ENTER.
    To determine the GUID that represents the replica set that you want to configure, follow these steps:
    Locate the following key in the registry:
    KEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NtFrs\Parameters\Replica Sets
    Below the Replica Sets subkey, there are one or more subkeys that are identified by a GUID. In the left pane, click the GUID, and then in the right
    pane note the Data that is listed for the Replica Set Root value. This file system path will indicate which replica set is represented by this GUID.
    Repeat step 4 for each GUID that is listed below the Replica Sets 
    And so on?
    I have only thos 2 DC's in the network...

  • Use Unchecked or unsafe operations: recompile with -Xlint

    hi all..
    I'm trying to create a GUI to select the necessary port to open. I got this code from JAVA cookbook:
    I'm using windows XP and JDK 1.6..
    import java.io.*;
    import javax.comm.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.util.*;
    import javax.swing.*;
    public class PortChooser extends JDialog implements ItemListener {
    HashMap map = new HashMap();
    String selectedPortName;
    CommPortIdentifier selectedPortIdentifier;
    JComboBox serialPortsChoice;
    JComboBox parallelPortsChoice;
    JComboBox other;
    SerialPort ttya;
    JLabel choice;
    protected final int PAD = 5;
    public void itemStateChanged(ItemEvent e) {
    selectedPortName = (String)((JComboBox)e.getSource()).getSelectedItem();
    selectedPortIdentifier = (CommPortIdentifier)map.get(selectedPortName);
    choice.setText(selectedPortName);
    public String getSelectedName() {
    return selectedPortName;
    public CommPortIdentifier getSelectedIdentifier() {
    return selectedPortIdentifier;
    public static void main(String[] ap) {
    PortChooser c = new PortChooser(null);
    c.setVisible(true);// blocking wait
    System.out.println("You chose " + c.getSelectedName() +" (known by " + c.getSelectedIdentifier() + ").");
    System.exit(0);
    public PortChooser(JFrame parent) {
    super(parent, "Port Chooser", true);
    makeGUI();
    populate();
    finishGUI();
    protected void makeGUI() {
    Container cp = getContentPane();
    JPanel centerPanel = new JPanel();
    cp.add(BorderLayout.CENTER, centerPanel);
    centerPanel.setLayout(new GridLayout(0,2, PAD, PAD));
    centerPanel.add(new JLabel("Serial Ports", JLabel.RIGHT));
    serialPortsChoice = new JComboBox();
    centerPanel.add(serialPortsChoice);
    serialPortsChoice.setEnabled(false);
    centerPanel.add(new JLabel("Parallel Ports", JLabel.RIGHT));
    parallelPortsChoice = new JComboBox();
    centerPanel.add(parallelPortsChoice);
    parallelPortsChoice.setEnabled(false);
    centerPanel.add(new JLabel("Unknown Ports", JLabel.RIGHT));
    other = new JComboBox();
    centerPanel.add(other);
    other.setEnabled(false);
    centerPanel.add(new JLabel("Your choice:", JLabel.RIGHT));
    centerPanel.add(choice = new JLabel());
    JButton okButton;
    cp.add(BorderLayout.SOUTH, okButton = new JButton("OK"));
    okButton.addActionListener(new ActionListener() {
         public void actionPerformed(ActionEvent e) {
              PortChooser.this.dispose();
    /** Populate the ComboBoxes by asking the Java Communications API
    * what ports it has. Since the initial information comes from
    * a Properties file, it may not exactly reflect your hardware.
    protected void populate() {
    Enumeration pList = CommPortIdentifier.getPortIdentifiers();
    while (pList.hasMoreElements()) {
    CommPortIdentifier cpi = (CommPortIdentifier)pList.nextElement();
    // System.out.println("Port " + cpi.getName());
    map.put(cpi.getName(), cpi);
    if (cpi.getPortType() == CommPortIdentifier.PORT_SERIAL) {
    serialPortsChoice.setEnabled(true);
    serialPortsChoice.addItem(cpi.getName());
    else if (cpi.getPortType() == CommPortIdentifier.PORT_PARALLEL) {
    parallelPortsChoice.setEnabled(true);
    parallelPortsChoice.addItem(cpi.getName());
    else {
    other.setEnabled(true);
    other.addItem(cpi.getName());
    serialPortsChoice.setSelectedIndex(-1);
    parallelPortsChoice.setSelectedIndex(-1);
    protected void finishGUI() {
    serialPortsChoice.addItemListener(this);
    parallelPortsChoice.addItemListener(this);
    other.addItemListener(this);
    pack();
    //addWindowListener(new WindowCloser(this, true));
    }}When i compile this it says PortChooser.java uses unchecked or unsafe operation
    recompile with -Xlint(any one know what this is?)
    Is it the JDK version i'm using ? First i thought it's a security issue.As in windows is not letting me access the serial ports.
    I checked with device manager.My serial ports are open. Ichanged my BIOS settings as well..
    (I read inputs from parallel port.But i dont use the comm api for that)
    I have installed the rxtx gnu.io package as well..
    Tried import gnu.io.* instead of javax.comm.*; still the same compilatiion error!!!
    Thanks in advance
    goodnews:-(

    It is basically a warning (not an error) that the compiler gives you to let you know that you are using a raw type where Java now supports generic types.
    For example, in the code you use:
    HashMap where you can use HashMap<String,String> to let the compiler know that you intend inserting Strings for both the key and the value. The former is considered to be unsafe because the compiler cannot control what is inserted into the HashMap while in the latter case it can ensure that only Strings are used for both keys and values.
    The compiler is also letting you know that if you want to see the details of these "unsafe" operations you can use the -Xlint:unchecked option when compiling and the compiler will show you exactly which lines contain the code that is generating the warning. So to compile with this option you would use javac -Xlint:unchecked ClassToCompile.

  • The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the error 0x80042316

    When using Microsoft Backup on a Windows Server 2008 SP2 (not R2 - [Microsoft version 6.0.6002]) I get the error "The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the
    error 0x80042316"
    The odd thing is that when I start the backup manually, it works fine. When  it runs automatically the error appears.
    When doing a SFC /scannow I do get errors that can't be corrected.
    Is there anything short of rebuilding this machine (It's a DC and the only one this office has) I can do to fix this?

    Hi,
    0x80042316 means "Another shadow copy creation is already in progress". This error could occur when another VSS instance is running.
    Is there any third party backup application installed? Try to uninstall it to see the result. And please also check if there is another backup schedule which causes the conflict.
    Meanwhile please provide the result of:
    vssadmin list providers
    vssadmin list writers
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected].
    Hi,
    I do have Crashplan ProE running. It started at 1900 and the Windows Backup starts at 2000. I have modified Crashplan not to start until 2300 to see if that helps.
    Also:
    vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
    (C) Copyright 2001-2005 Microsoft Corp.
    Provider name: 'Microsoft Software Shadow Copy provider 1.0'
       Provider type: System
       Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
       Version: 1.0.0.7
    AND:
    vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
    (C) Copyright 2001-2005 Microsoft Corp.
    Writer name: 'System Writer'
       Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
       Writer Instance Id: {f0c7ee55-5885-4894-8dd3-14fffbdd4d2e}
       State: [1] Stable
       Last error: No error
    Writer name: 'SqlServerWriter'
       Writer Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
       Writer Instance Id: {017a0133-7577-4322-b513-04f72404b70a}
       State: [1] Stable
       Last error: No error
    Writer name: 'ASR Writer'
       Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
       Writer Instance Id: {6b17d670-9ea8-4ff1-a59e-b474f4b893db}
       State: [1] Stable
       Last error: No error
    Writer name: 'Shadow Copy Optimization Writer'
       Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
       Writer Instance Id: {56aad1bf-9bf1-4fde-b2f4-a706577c632d}
       State: [1] Stable
       Last error: No error
    Writer name: 'COM+ REGDB Writer'
       Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
       Writer Instance Id: {e942d09d-276e-450a-9bf4-b1d5abe6af8a}
       State: [1] Stable
       Last error: No error
    Writer name: 'Registry Writer'
       Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
       Writer Instance Id: {3737164b-61ac-454c-b1f7-42f2620f10db}
       State: [1] Stable
       Last error: No error
    Writer name: 'DFS Replication service writer'
       Writer Id: {2707761b-2324-473d-88eb-eb007a359533}
       Writer Instance Id: {39458257-aca4-481e-a302-994f3eb1e9a3}
       State: [1] Stable
       Last error: No error
    Writer name: 'Dhcp Jet Writer'
       Writer Id: {be9ac81e-3619-421f-920f-4c6fea9e93ad}
       Writer Instance Id: {6a8ab4aa-760c-4102-a27f-58f570c9c572}
       State: [1] Stable
       Last error: No error
    Writer name: 'NTDS'
       Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
       Writer Instance Id: {53577013-8397-448e-9a25-c7cac08aa0a8}
       State: [1] Stable
       Last error: No error
    Writer name: 'IIS Metabase Writer'
       Writer Id: {59b1f0cf-90ef-465f-9609-6ca8b2938366}
       Writer Instance Id: {ee2c9173-92e7-455c-8f73-601647c0ddb2}
       State: [1] Stable
       Last error: No error
    Writer name: 'BITS Writer'
       Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
       Writer Instance Id: {b1f60392-9dfd-4e3a-bda6-3dc2cb622ba4}
       State: [1] Stable
       Last error: No error
    Writer name: 'IIS Config Writer'
       Writer Id: {2a40fd15-dfca-4aa8-a654-1f8c654603f6}
       Writer Instance Id: {a328aede-78f0-448e-9c36-e8379e9fe2a8}
       State: [1] Stable
       Last error: No error
    Writer name: 'WMI Writer'
       Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
       Writer Instance Id: {c39fa334-5c9d-4906-a3b5-33c3444948e6}
       State: [1] Stable
       Last error: No error
    Writer name: 'NPS VSS Writer'
       Writer Id: {35e81631-13e1-48db-97fc-d5bc721bb18a}
       Writer Instance Id: {3c9c5584-b5fd-48cf-8541-0c8bfa585ca0}
       State: [1] Stable
       Last error: No error

Maybe you are looking for

  • Novo contato para o produto SAP NFE

    Caros, estou colocando esta informação aqui pois ainda existem muitas mensagens e e-mails direcionados/nomeados a mim, com dúvidas sobre escopo e prazos de liberação de funcionalidades do produto SAP GRC NFE. Como é de conhecimento de alguns, desde 1

  • Installation problem w/Vista

    Boot Camp/Vista installation problem MacBook 2GHz Intel Core 2 Duo, 2GB RAM, Snow Leopard 10.6.2. Trying to install Windows Vista Home Premium using Boot Camp. Started Boot Camp Installer and created 32GB partition. Inserted Vista disk as instructed

  • Read and write Values from Configuration File in BizTalk

    There is a requirement where Biz talk orchestration read the value dynamically from Config Store.After some process updating the value in config store. I though to use SQL Server and create one table with single column.Biztalk will call the Storeproc

  • Exporting Bridge Settings on Network

    Greetings fellow Bridge users, I would like to manage my visual assets through Bridge. I have created several image folders and added keywords to each image, all of which live on a network. I would like to export these settings so that my coworker ca

  • [39008] Logical dimension table X has a source

    Hi I have a Fact table with some dimensions. If I add a detail table to that Fact table I get: [39008] Logical dimension table X has a source Y that does not join to any fact source. For each dimension that I had. Is this possible to model?. To have