Opmn.xml file showing strange path and strange ias instance id

hi every one,
i have installed R12.1.1 on linux X86 platform.
After Installing, everything is working properly. Iam able to connect the application and run reports.
But when the error is coming
when iam upgrading from 12.1.1 to 12.1.3.
while applying 10.1.3.5 patch set, at the time installing the components
iam getting the error showing
"/nfs/bld/d26/PRDXBLD9/apps/tech_st/10.1.3/opmn/bin/ons" no file or directory.
so i have seen my opmn.xml file ( /prod_apps/apps/tech_st/10.1.3/opmn/conf/opmn.xml)
the file is showing these strange path
<variable id="LD_LIBRARY_PATH" value="/nfs/bld/d26/PRDXBLD9/apps/tech_st/10.1.3/lib" append="true"/>
</environment>
<process-type id="IASPT" module-id="IASPT" working-dir="/nfs/bld/d26/PRDXBLD9/apps/tech_st/10.1.3/iaspt/bin">
its showiing the path /nfs/bld/d26/PRDXBLD9
could you please clear my doubt why this file showing this strange path.

HI ,
i have some confusion regarding opmn.xml file.
i have seen opmn.xml file in two different locations.
1. first location $INST_TOP/ora/10.1.3/opmn/conf
this file showing the correct variables as per my current environment.
2. second location $ORACLE_HOME(10.1.3 Oracle Home)/opmn/conf/
this file showing the strange variables which are not my current variables.
could you please explain why these two files are showing differnet varibles .
could you please explain when and where these two files are used by the application tier.
please reply me as sooon as posssibe.

Similar Messages

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

All .xml files show up as being owned by Application FCP ?

All xml files show up in the finder as being owned by FCP?

It's not a problem of going in and changing the default application for just one file it's many files.
Again, if you click the "Change All" button, all XML files will be reassigned to the selected application .
Any idea why this universally occurred accross all .xml files?
I can only guess, but if you had no application that clearly was registered in the OS as handling XML files, the OS defaulted to FCP which being an Apple application was probably in the system as handling XML.

Large XML files, how to split and read them in PI

Hi,
For a specific requirement, we have a 60 MB-90 MB XML file being generated by a legacy application.
This file has to be processed by PI 7.31 Sender File Adapter and should be posted as a ABAP proxy to SAP ECC system.
To address any performance issues, we are planning to read the files in chunks.
Is there a way by which we can configure the file adapter to pick a fixed no.of records to limit the size.
In inputs in this regard will be appreciated.
regards,
Younus

Hi Younus,
First of all if you are using PI 7.31, then you should be quite able to process XML file of about 100MB scale. Performance issue shall occur in ECC side instead as it can not handle such high volume.
My suggestion will be to pick the whole XML file at one go and do necessary mapping. However on receiver side use SOAP Adapter instead of XI for making proxy calls to ECC.
In SOAP adapter (using HTTP as Transport and XI 3.0 as Message protocol) there's an option as 'XI Packaging' which can be used to send data in packets.
Refer below help doc on it.
Configuring the Receiver SOAP Adapter - Advanced Adapter Engine - SAP Library
Thanks
Bibek

How do I put a file in my path and chmod it +x?

I want to transfer karaoke files from my mac to my iphone (to use with karaoke anywhere). On a different message board someone explained how to do it, but I have no idea how to put a file in my path and chmod it +x; I know very little about computers.
If it helps, the explanation that I don't understand is in post 6 of the following thread: http://forum.joltsoft.net/topic/32/bulk-transfer/

Create a subdirectory call bin
mkdir $HOME/bin
Put the qsend php script in the bin directory. Make the qsend php script executable
chmod +x $HOME/bin/qsend
Add the following to your shell initialization file (more on the name in a moment). You can use an editor such as nano from the Terminal, or Fraise (free download), or TextWrangler (free download)
export PATH="$HOME/bin:$PATH"
About the initialization file. It will be either .bash_profile or .profile (NOTE: by default neither file will exist on your system, unless you created one in the past).
Because these names start with a dot, they are hidden from the Finder, so you will need to use the Terminal and the "ls -a" command
ls -a $HOME/.bash_profile $HOME/.profile
If you already have a .bash_profile, add the export PATH="..." to .bash_profile
If you do not have .bash_profile, but you do have a .profile, then add the export to .profile
If you do not have either of those files, then create .bash_profile using nano, Fraise, or TextWrangler.
You can find out more information about bash shell initialization files using the command "man bash".
Once you have added your export PATH="..." command, quit the Terminal, and restart a new session, which will cause your bash shell to read the initialization file you just modified.
You should now be able to use your qsend script.
Message was edited by: BobHarris

Missing opmn.xml file and opmn/conf folder

I downloaded Oracle Application Server 10g, Version 10.1.3.4.0
My app says “Warning: Could not find file /Desktop/OAS/opmn/conf/opmn.xml to copy.” My opmn/conf folder is missing and I am unable to install my application that uses OAS. The zip file I downloaded, oc4j_extended_101340.zip, doesn’t have that directory either. So how do I generate it?
The readme file doesn’t say anything about it. It just says
“There are no specific tasks that need to be performed to ready the new OC4J
instance for use. The new OC4J instance can be used immediately after the unzip
operation has completed.”
So then the opmn/conf should come right out of the box, right?

First thing, if you are using standalone OC4J (the one installed by unzipping oc4j_extended_101340.zip), you will not have OPMN in there. That means $ORACLE_HOME/opmn directory (and any sub directory) will not exist. Standalone OC4J is not managed by OPMN.
But if you installed Oracle Application Server from the media using regular Oracle Installer, it is OPMN managed and all of opmn directories and files should exist. If any of the file or directory doesn't exist that would mean your installation wasn't clean. You will have look at installer logs for errors. In theory you can try by creating/copying files and opmn directories from some other clean installation but I will strongly suggest to re-install to avoid any other future potential issues.
I didn't understand the part when you say your application is complaining about missing opmn.xml. What is this application? Any custom (non-Oracle provided) application does/should not have any dependency on opmn. Can you clarify this?
Thanks
Shail

Finding and retrieving an XML file from an application and an applet

I have a problem.
I have data stored in an XML file. I want to be able to call that file and store it into a document object from an application standing alone on a computer as weel as from an applet that would be running over the web.
I don't know how to do this.
When I use a relative path name for the application it attaches the path of the folder that contains java.exe. I could do something with the class path but this wouldn't help the end user of the application on a different computer. For similar reasons I don't want to hard code because I don't know where the final applet will be stored.
I have a table that holds, sorts and filters the data so I want the table to collect the data, I don't want to dictate the path from the applet or the application, I want a method that is consistant with both scenarios.
Can anyone offer some advice?

I've just finished trying it out, here is what I did:
String xmlDocName="filename.xml";
java.net.URL fileURL=this.getClass().getResource(xmlDocName);
private final String fileName = fileURL.toString().substring(6);
The substring removes the "file:/" from the URL.
This works fine in the IDE, I have even stored the xml file in a lower folder e.g. package_folder/xml_folder/filename.xml and replaced the xmlDocName with "xml_folder/filename.xml" and it worked fine.
I haven't tried it in an applet because I'm running IE and as you are well aware there are problems with swing and IE applets. But you answer deserves the Duke Dollars, thank you very much.

Merging X XML files, sorting the resultlist and finally execute a distinct?

I have several questions about an XSLT file that I should write:
1� First, I get X paths to XML files. It can be 2, 3, 4, ... whatever a number. I don't know exactly the total amount of XML files.
I need to merge them dynamicly to one resultset.
2� Next, I need to sort them on a specific node (remark: every XML file has the same DOM tree)
3� Finally, I want to distinct the values because some of the nodes are in file 1, 2, 3 ... So I don't want duplicates.
I guess this is not possible in XSLT? I can't use Java, so it should be done using XSLT ;;;

Have a look here:
[http://www.jenitennison.com/xslt/index.html|http://www.jenitennison.com/xslt/index.html]
under the "Sorting" and "Grouping" sections. Also consider using XSLT 2.0, which has built-in grouping elements which make the convoluted XSLT 1.0 techniques unnecessary.

Reading XML file into Dynamic Node and Display its output as Table.

Hi All,
Following is the output of XML file:
   <Company>
     <Employee>
          <Name>John</Name>
          <Age>23</Age>
          <***>Male</***>
          <Location>Frankfurt</Location>
     </Employee>
     <Employee>
          <Name>Tina</Name>
          <Age>21</Age>
          <***>Female</***>
          <Location>Boston</Location>
     </Employee>
     <Department>
          <Name>Sales</Name>
          <HQ>Chicago</HQ>
          <Emplyoees>2300</Employees>
     </Department>
I'm able to read the output through DOM parser. But How do I convert this into dynamic node and display this in Web dynpro as Table?
Any pointers in this regard will be great help?
Thanks
Srikant

Hi Maksim,
I've used your example and its now helping as there is kind of agreement on that I'll be knowing the structure of Xml and I can fill the nodes.
But suppose if you have Xml has following structure :
<?xml version="1.0" encoding="utf-8"?><DATA>
<item><MAILERID TYPE="C" SIZE="000030">21</MAILERID><ORG_CODE TYPE="C" SIZE="000004">1232</ORG_CODE><EVENTID TYPE="C" SIZE="000015">CONTRACT</EVENTID><SUBSCR_VALUE TYPE="C" SIZE="000001">0</SUBSCR_VALUE></item>
<item><MAILERID TYPE="C" SIZE="000030">21</MAILERID><ORG_CODE TYPE="C" SIZE="000004">1232</ORG_CODE><EVENTID TYPE="C" SIZE="000015">CREDIT</EVENTID><SUBSCR_VALUE TYPE="C" SIZE="000001">0</SUBSCR_VALUE></item>
<item><MAILERID TYPE="C" SIZE="000030">21</MAILERID><ORG_CODE TYPE="C" SIZE="000004">1232</ORG_CODE><EVENTID TYPE="C" SIZE="000015">EMPRESS</EVENTID><SUBSCR_VALUE TYPE="C" SIZE="000001">0</SUBSCR_VALUE></item>
<item><MAILERID TYPE="C" SIZE="000030">21</MAILERID><ORG_CODE TYPE="C" SIZE="000004">1232</ORG_CODE><EVENTID TYPE="C" SIZE="000015">PAYMENT</EVENTID><SUBSCR_VALUE TYPE="C" SIZE="000001">0</SUBSCR_VALUE></item>
<item><MAILERID TYPE="C" SIZE="000030">21</MAILERID><ORG_CODE TYPE="C" SIZE="000004">1232</ORG_CODE><EVENTID TYPE="C" SIZE="000015">PRICE</EVENTID><SUBSCR_VALUE TYPE="C" SIZE="000001">0</SUBSCR_VALUE></item>
</DATA>
How we will do in this case?
Can we have something similar using DOM? Also what is the best method for displaying data being sent in form of XML. And generalize it for cases like this.
Thanks
Srikant

Is a copy of .xml file on the iPod too? If so, how can I copy ONLY the .xml file to my computer and NOT have to copy all my music files too?

I had to re-load my OS (Windows XP Pro) from a HD snapshot via Acronis True Image Server. I save my OS on my C: drive and all my data files on my D: drive. So when I re-loaded my OS, I still have all of my music files intact.
I have re-loaded the OS before and had to re-create iTunes library which I did by doing the follwing:
1. cut & paste .xml file in iTunes folder to desktop
2. delete .itl file in iTunes folder
3. import .xml file through iTunes file>library>iport playlist
4. navigate to .xml file on desktop and import
This worked last time I re-loaded my OS but not this time for some reason.
So I'm wondering if there is a copy of the .xml file on the iPod itself in the iPod_Control folder that I can copy and paste to my comuter desktop and import via the above steps?
I have seen all kinds of solutions on the web that include copying the music files from the iPod to the computer. I don't need to do that. I have the music files. I just need the .xml file so iTunes can talk to my iPod (5th Generation - 30G).

Backup your music library, that is the only way to ensure it does not go missing through theft, damage, operator error, machine breaks, upgrades go wrong, operator goes wrong .........

How to read a XML file from BLOB column and insert in a table - PL/SQL Only

Hi,
To make data load more simple to end user instead placing file on the server and use SQL-LOADER, I came up with new idea that using oracle ebusiness suite attachment functionality. that loads a XML file from local PC to a database column(table is fnd_attachments, default data type is BLOB over here).
I tried with DBMS_LOB and didnt get around.
Please can anyone tell me how to read the BLOB column using PL/SQL and store the data in a oracle table. Here's the sample XML file and table structure FYI.
<?xml version="1.0" encoding="UTF-8"?>
<dataroot xmlns:od="urn:schemas-microsoft-com:officedata" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="Corporate_alloc.xsd" generated="2009-07-07T14:17:49">
<Corporate_alloc>
<PKG_CODE>BKCORP</PKG_CODE>
<PKG_NAME>Corporate Edition - Books</PKG_NAME>
<DET_CODE>B9780080543758</DET_CODE>
<DET_NAME>Waves, Tides and Shallow-Water Processes</DET_NAME>
<ALLOCATION_RATIO>0.000041</ALLOCATION_RATIO>
</Corporate_alloc>
<Corporate_alloc>
<PKG_CODE>BKCORP</PKG_CODE>
<PKG_NAME>Corporate Edition - Books</PKG_NAME>
<DET_CODE>B9780080534343</DET_CODE>
<DET_NAME>Hydrostatically Loaded Structures</DET_NAME>
<ALLOCATION_RATIO>0.000127</ALLOCATION_RATIO>
</Corporate_alloc>
</dataroot>
CREATE TABLE TEST_XML
( PKG_CODE VARCHAR2(50),
PKG_NAME VARCHAR2(100),
DET_CODE VARCHAR2(20),
DET_NAME VARCHAR2(500),
ALLOCATION_RATIO NUMBER )
Thanks
EBV

In regards to #3, use the COLUMNS functionality of XMLTable instead of using Extract. Two simple examples are
Re: XML Data - Caliculate fields
Re: Extractvalue function not recognised

Reading XML file from application server and put into internal table-4.6C

Dear All,
Is there any way of reading XML file from application server to SAP? I am using 4.6C. Function module SCMS_STRING_TO_XSTRING function module is not available. Please suggest.
Thanks and regards,
Atanu

Hi Atanu!
Simply use the XSLT transformation 'ID'.
FIELD-SYMBOLS <ls_result> TYPE ANY.
CREATE DATA lref_data TYPE (your_structure).
ASSIGN lref_data->* TO <ls_result>.
CALL TRANSFORMATION id
SOURCE XML xmlstr
RESULT result = <ls_result>.
"xmlstr" contains your XML file. Just read it into it via standard I/O operations. "<ls_result>" will contain your DDIC formatted content.
Best regards
Torsten

LSMW - source file from Logical Path and Files?

Hi,
When specifing the source file (legacy data) you want to use to load from - you can choose a file from the application server.
For the application server file does anyone know is there anyway that you can use a logical path and file to represent this source file?
I do not see this option in LSMW and am surprised at this as it necessitates changing the LSMW in each target system.
Thanks in advance.
Kind regards,
Mark

Hi,
When specifing the source file (legacy data) you want to use to load from - you can choose a file from the application server.
For the application server file does anyone know is there anyway that you can use a logical path and file to represent this source file?
I do not see this option in LSMW and am surprised at this as it necessitates changing the LSMW in each target system.
Thanks in advance.
Kind regards,
Mark

File Adapter : read XML file with data validation and file rejection ?

Hello,
In order to read a XML file with the file adapter, I have defined a XSD that I have imported to my project.
Now the File Adapter reads the file correctly but it does not give an error when:
- the data types are not valid. Ex: dateTime is expected in a node and a string is provided
- the XML file has invalid attributes.
How can I manage error handling for XML files ?
Should I write my own Java XPath function to validate the file after is processed ? (here is an example for doing this : http://www.experts-exchange.com/Web/Web_Languages/XML/Q_21058568.html)
Thanks.

one option is to specify validateXML on the partnerlink (that describes the file adapter endpoint) such as shown here
<partnerLinkBinding name="StarLoanService">
<property name="wsdlLocation"> http://<hostname>:9700/orabpel/default/StarLoan/StarLoan?wsdl</property>
<property name="validateXML">true</property>
</partnerLinkBinding>
hth clemens

I want to create xml file using photoshop script and also i can easily add, modify, delete based on file name

Hi,
Please help me for this.
I need to create XML file for mentioned below. when i run the photoshop script i need deatails for active document name, date, time and status.
<?xml version="1.0" encoding="UTF-8"?>
<sample>
<filename>Cradboard_Boxes_Small.tif</filename>
<date>today date</date>
<starttime>now</starttime>
<status>delivered</status>
</sample>
<sample>
<filename>Cardboard_Boxes_Student_Vaue_Pack.jpg</filename>
<date>today date</date>
<starttime>now</starttime>
<status>delivered</status>
</sample>
I need read that xml after creating and modify based on file name. i need to modify status after file finished.
if the file name is already exist i want to modify or delete or add whatever i need.
Kindly help me simple way

You may want to look into getting Xtools ps-scripts - Browse Files at SourceForge.net then. Most of the support is for ActionManager script code where XML code is use as an intermediate step. There are quite a few Photoshop script in XTools . Ross Huitt is an expert javascript programmer though is is fed up with Adobe's lack of support for Photoshop scripting particularly the bugs in ScriptUI he is still maintaining tool he has created for us free of charge. Tools like Image Processor Pro. None of his scripts are save as binary so you can read all of his code there is a wealth of knowledge in there....
Also there is a scripting forum Photoshop Scripting

Opmn.xml file showing strange path and strange ias instance id

Similar Messages

Maybe you are looking for