All .xml files show up as being owned by Application FCP ?
All xml files show up in the finder as being owned by FCP?
It's not a problem of going in and changing the default application for just one file it's many files.
Again, if you click the "Change All" button, all XML files will be reassigned to the selected application .
Any idea why this universally occurred accross all .xml files?
I can only guess, but if you had no application that clearly was registered in the OS as handling XML files, the OS defaulted to FCP which being an Apple application was probably in the system as handling XML.
Similar Messages
-
How to Display all xml files at time in the browser
Hi,
In my solution , it have one folder contain all xml files onliy like Billersettings.111.2.xml , Billersettings.113.2.xml...etc.
Each xml file have only one record like biillerid,name,amount,date..etc. Now , when i run the page ,it should be show all files contained in form of gridview....
i wrote some code , but shows error like.. Root element is missing. My code is here..
protected
void Page_Load(object
sender, EventArgs e){
if(!IsPostBack){
String sFilepath =
"Billersettings" +
"*" +
".xml";
string[] paths =
Directory.GetFiles(@"D:\Fiserv\PWSunittest\PWSunittest\BillerSettings\",
sFilepath);
foreach (string
xmlFile in paths)
dataSet.ReadXml(xmlFile);
GridView1.DataSource = dataSet;
GridView1.DataBind();
} Please help me
Enugu Srinivasulu .NET DeveloperHi,
This forum is to discuss problems of C# development. Your question is not related to the topic of this forum.
I suggestion you post the question in the ASP.NET forums at
http://forums.asp.net/. It is appropriate and more experts will assist you.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
File Adapter and reading all XML files from direcotry
Problem occurs on PI 7.1
I defined sender file adapter. File name mask is: "*.xml" to read all XML messages from directory.
Quality of service is: Exactly One.
Poll Interval: 30
Retry interval: 30
Processing mode: Archive with option "Add Timestamp".
Processing sequence: by name.
I though that with above configuration my File Adapter will be reading folder for all coming XML files. But somehow it is reading XMLs only when I'm activating it in Integration Builder.
Any idea what can cause such strange problem?Hi Tomasz,
As per my understanding, you need to activate the file adapter for reading the XML files on your directory. Right?
If that is the case, then the issue might be with the Cache.
1. Clear the cache from the Integration Builder.
2. Check in SXI_CACHE whether there are any issues. Click on Delta Cache refresh to find out if there are any cache related issues.
Thanks, -
The "All my Files" function shows files that are inside locked folders. It even allows opening said files. This is not good! Thankfully they don't show up in spotlight, but that is little console.
Does anyone else have this problem, and is there a fix?
On another note, the forms we use to enter text on this site don't follow the usual "Mac" rules. You can't "3 finger" click a word to use the dictionary, right clicking doesn't give you the universal contextual menu functions... What gives?
Johnbump
-
Opmn.xml file showing strange path and strange ias instance id
hi every one,
i have installed R12.1.1 on linux X86 platform.
After Installing, everything is working properly. Iam able to connect the application and run reports.
But when the error is coming
when iam upgrading from 12.1.1 to 12.1.3.
while applying 10.1.3.5 patch set, at the time installing the components
iam getting the error showing
"/nfs/bld/d26/PRDXBLD9/apps/tech_st/10.1.3/opmn/bin/ons" no file or directory.
so i have seen my opmn.xml file ( /prod_apps/apps/tech_st/10.1.3/opmn/conf/opmn.xml)
the file is showing these strange path
<variable id="LD_LIBRARY_PATH" value="/nfs/bld/d26/PRDXBLD9/apps/tech_st/10.1.3/lib" append="true"/>
</environment>
<process-type id="IASPT" module-id="IASPT" working-dir="/nfs/bld/d26/PRDXBLD9/apps/tech_st/10.1.3/iaspt/bin">
its showiing the path /nfs/bld/d26/PRDXBLD9
could you please clear my doubt why this file showing this strange path.HI ,
i have some confusion regarding opmn.xml file.
i have seen opmn.xml file in two different locations.
1. first location $INST_TOP/ora/10.1.3/opmn/conf
this file showing the correct variables as per my current environment.
2. second location $ORACLE_HOME(10.1.3 Oracle Home)/opmn/conf/
this file showing the strange variables which are not my current variables.
could you please explain why these two files are showing differnet varibles .
could you please explain when and where these two files are used by the application tier.
please reply me as sooon as posssibe. -
GUI to create all xml file combinations allowed by a Schema
Suppose I have an XML Schema and according to this Schema a total of six xml file configurations are legitimately possible.
1. Is there an easy way to create a Swing GUI that can be used to easily generate all six of these possible xml files?
...or...
2. Can anyone recommend specific tools that would be helpful in creating such a GUI.
I am familiar with tools to validate an xml file against a Schema but what tools are available to programmatically read a schema and extract all the possible legitimate combinations of the fields?Hi,
What i need is the following:
I have some selects wich generates several XML files, but those files are plane, like this:
<?xml version = '1.0' encoding = 'ISO-8859-1'?>
<ROWSETTAG>
<ROWTAG>
<TX_COAPI>PES</TX_COAPI>
<TX_DNAPI>Consultas Pesetas</TX_DNAPI>
<TX_DEEUS>Datuak Pezetetan</YX_DEEUS>
<TX_DIREC>C:\TEST\</TX_DIREC>
<TX_ORDEN>11</TX_ORDEN>
</ROWAG>
Well, i need to apply an schema to each of that XML files, and the output of that process it should be a new XML file "formatted" or "transformed" ( i don't know what is the word) with the attributes,... that appears in a Schema file.
I don't know if this is possible, and how to do this, or maybe i should use a XSLT file...
i am newbie at this technology.
thx for your time!!! -
Ychat extension appearing on all xml file downloads!
I know (I think) that this is something done by Yahoo. What I can't figure out is how to keep this extension from attaching itself to my xml files! Any help? Haven't been able to see where to turn this off.
Thanks,
KittieFound this post by accident. Not sure why I didn't see it when searching on ychat, but here's the answer, and the script fixed me right up!!!!
http://discussions.apple.com/thread.jspa?messageID=5744911& -
LUMIERE created XML files to 'facilitate the migration of project in FCP.'
I recently purchased Lumiere so that I could work with material shot on the JVC GY-HD100U camera in FCP. I understand that FCP is due to for an update soon, but alas, I'm unable to wait. That being said, I have followed the various steps to create mov files from the compressed MP2 files generated through Lumiere. The supposed last step before beginning the edit in FCP is to decide whether or not to 'create FCP XML' or not.
1. What purpose does using XML files instead of the .mov files serve in FCP? It is an option in the import files drop down... What gives? For that matter why and what are xml files function here? Pretty Green, I know
2. Can I edit using the custom 24p Apple Intermediate Codec I was told to create usinf the mov files instead, and then online, or convert the timeline to full resolution just the same using the mov files?
3. If I am getting an error message when trying to import the XML files and am therefore unablr to do so... any ideas why? I had one file with 'acceptable errors'. The log read that there was a path problem with the audio files, which I was unable to fix. The other files would not import at all. Why?
4. What is the best way/codec for editing HDV - outputing te best image resolution without a Xserve raid or the like...
I know this probably reads like questions for a Lumiere forum, but I have tried and received no answers... Any insights appreciated, as my deadline is fast approaching.
-Thanks
Tom.Maybe this will help from the Lumiere HD forum on their site (http://www.lumierehd.com/forums/showthread.php?t=576) :
720p EDITORIAL WORKFLOW USING JVC-GYHD100 AND FCP5.0
By Jon Farhat
CAPTURING AND EDITING
JVC GY-HD100 720p > LUMIERE HD > FINAL CUT PRO 5.0
Workflow Steps:
1. Launch Lumiere HD and begin with the CAPTURE/PRINT tab.
2. Enter your Logging information into the fields labeled REEL, DESC., SCENE and SHOT. The program with create a name for you based on this information and place it in the NAME field.
3. You can also check AUTOINCREMENT. Doing this will create a Name based on the Scene Name and will add a Shot number starting with 1. Each time you capture a new take, the shot number will increase as well as appear as an extension to the file name as indicated in the Name field.
4. Click on the DESTINATION button to choose a folder for your raw Transport streams. The files placed in this folder will have the naming convention, DESCSCENE1.m2t. Note that these files have the Audio and Video multiplexed together.
5. Use the toggle controls to line find your desired take and back up a while to add a little pre-roll. (Note: LHD does not do Batch Capturing so you have to click the CAPTURE and STOP CAPTURE button for each take.
6. Once you have captured all your takes and placed them in your working folder, click on the PROGRAM STREAM tab.
7. Click on the DESTINATION button in the PROGRAM STREAM VIDEO area. When the navigation window opens, click on NEW FOLDER and create a folder called “Video”. Select OK to choose your new folder.
8. Click on the DESTINATION button in the PROGRAM STREAM AUDIO area. When the navigation window opens, click on NEW FOLDER and create a folder called “Audio”. Select OK to choose your new folder.
9. Now click on the SELECT M2T FILE(S). IMPORTANT NOTE: If you have used the Autoincrement function, or have sequentially numbered files, no not select the folder housing your m2t’s but rather drag select across all your takes, starting from the lowest number to the highest. Then click OK.
10. Now you are read to split the raw m2t transport streams into a separate AIFF audio file, which will be placed in the Audio directory you created and and M2V video file which will be placed in the Video Directory. It is important that the audio files and video files are in these separate directories.
11. Choose the PRESETS pull-down menu In the REALTIME TIMELINE CODEC window. Select OTHER.
12. In the COMPRESSION TYPE Pulldown menu, select APPLE INTERMEDIATE CODEC.
13. Select the FRAMES PER SECOND pull-down menu and select 23.98.
14. Select the OTHER button in the COMPRESSOR > PRESET.
15. In the SIZE section, choose the SOURCE button. Note that you can also create a smaller dimension such as 720 x 406 (16:9 aspect ratio) since this is only used as a proxy in FCP to edit with. But if you have the memory and speed, working in the full 1280 x 720 is preferable. These files will not be rendered into your final master. After you edit with this proxy codec, you will use Media Manager to build a new timeline from the full size raw capture images. It is on this new full-size timeline that you will color correct your movie as well. (Discussed later in this document)
16. In the FINAL CUT AUTOMATION section, check the CREATE FCP XML box, and UN-CHECK the ANAMORPHIC box.
17. Click on the AUDIO FILES? Button and either double-click on the AUDIO directory you created which houses your AIFF’s and then click OPEN or simply select the directory once and then click OPEN.
18. Now click on the SOURCE button in the SOURCE/DESTINATION section. Open the Video folder which houses your de-multiplexed m2v video files.
19. Click on the DESTINATION button in the SOURCE/DESTINATION section and select NEW FOLDER and call this “project name”_REALTIMES. This is where your .mov files which are compressed with the AIC (Apple Intermediate Codec) will be placed.
20. You are now ready to hit the GO button. So, what are you waiting for, hit the GO button now!
21. When the Quicktime settings dialog opens, confirm your SETTINGS, FILTER and SIZE settings under the VIDEO sections. IMPORTANT NOTE: Make sure to select the SOUND > SETTINGS button and change the SAMPLE RATE to 48kHz, 16 bit, Stereo.
22. After Lumiere HD creates your file(s), another window will open asking you to input your XML FILE NAME. Do this then click OK.
23. When you view your “REALTIMES” directory, you will notice that you now have matching files to your demultiplexed Video files. For instance, if your file was named, DESCSCENE1.m2t then then Realtime file you use for editing will be named DESCSCENE1.mov. The XML file will also appear in this destination directory.
24. Open Final Cut Pro. Let’s start by creating a new EASY SETUP preset. (You will only have to do this one time since no Easy Setup setup exists for AIC 24p in FCP. From then on, you will start FCP and simply go to Easy Setup and select this Project Preset before you import your XML skipping to item 29 below) Select AUDIO VIDEO SETTINGS. Under the SEQUENCE PRESETS tab, select APPLE INTERMEDIATE CODEC 720p30 from the scrolling menu. Note that we are going to create a preset for 23.98 from this one by changing the frame rate. All other settings are the same as the 720p30 preset.
25. Select the DUPLICATE button. In the SEQUENCE PRESET EDITOR change the NAME to “Apple Intermediate Codec 720p24” Go ahead and also change 30 to 24 in the DESCRIPTION text box.
26. Confirm the following settings in the GENERAL tab.
a. FRAME SIZE: 1280 X 720
b. ASPECT RATIO: HDTV 720p (16:9)
c. Make sure the ANAMORPHIC (16:9) box is UNCHECKED.
d. PIXEL ASPECT RATIO: Square
e. FIELD DOMINANCE: None
f. EDITING TIMEBASE: 23.98
g. TIMECODE RATE: Same as Editing Timebase
h. QUICKTIME VIDEO SETTINGS: Apple Intermediate Codec.
i. QUALITY: Desired setting based on your system capacity.
j. AUDIO SETTINGS: 48kHz, 16-bit and a Default Config:
27. Click OK, then select this new Preset once you return to the AUDIO/VIDEO SETTINGS dialog and then click CREATE EASY SETUP.
28. When the EASY SETUP dialog opens up create type in the NAME field, “HDV-Apple Intermediate Codec 720p24” Enter a description and then click the CREATE button. Save in the CUSTOM SETTINGS pull-down menu.
29. Let’s start by closing all open Projects and stay in FCP. It’s always good to have a separate 720p project for all your JVC HD-100 sequences. Select EASY SETUP and select your new “HDV-Apple Intermediate Codec 720p24” Of course you will still be in the basic program now with no Projects or Sequences, but your system is now configured to import the XML and the sequence presets will match perfectly. (Keep in mind we did all this to circumvent a bug in FCP5.0)
30. Now go to FILE > IMPORT > XML and select the XML file you created in Lumiere HD. Select CHOOSE. When the IMPORT XML window opens, select the CREATE NEW PROJECT in the DESTINATION pull down menu. Make sure your DEFAULT is APPLE INTERMEDIATE CODEC 720p24. Make sure all buttons are checked, including OVERRIDE WITH SETTINGS FROM XML. You should be able to simply check this override box when importing into any open FCP session and create a new project with the XML settings once the bug is fixed in FCP.
31. This will create a new project named after your XML, and a directory of all your real-time clips called “project name”_REALTIMES.
32. You will also notice that the clip names do not end with .mov but rather end with .m2v. These names actually access the AIC compressed .mov files as this naming convention in the browser is simply a means to locate the uncompressed transport streams later with Media Manager once you have finished editing.
33. Now you can start editing. When you drag a clip to the Timeline, the corresponding AIFF audio file will also travel with it and be locked to the Video. However, until Timecode sync is offered in LHD, you may need to re-sync via the Clapper slate as mentioned above. However, unless you are using very long takes, the sync is within fractions of a frame and isn’t perceptible.
34. Edit away but avoid doing things like color correction or final rendering of effects until you are done with the need to work in real-time.
35. Once you are finished editing, move to the next section.
GOING ONLINE
FINAL CUT PRO 5.0 > LUMIERE HD > JVC GY-HD100 720p
CONNECTING ORIGINAL MEDIA: ONLINE OPTION #1
1. Select sequence in your browser.
2. Choose FILE > MEDIA MANAGER.
3. Media Manager Settings:
a. Media: CREATE OFFLINE
b. Set Sequence to CUSTOM
c. 1280 X 720
d. Pixel Aspect Ratio: SQUARE
e. Anamorphic Box: UNCHECKED
f. Editing Timebase: 23.98
g. Timecode rate: SAME
h. Compressor: NONE or HDV720p30
i. Audio: 48kHz, 16 bit, stereo default
j. Project name: ONLINE 720p24
k. Go to ONLINE 720p24 tab in the browser. Double click on the sequence. (Note: the is currently an issue in LHD’s XML function in that it will not transfer the REEL NAME to the clip. You will have to select all your clips to add the reel name, otherwise the the clips will not be made “Offline”. You can always right-click on the clip an select the MAKE OFFLINE function. )
l. Save project name: ONLINE 720p24
m. Go to ONLINE 720p24 tab in the browser and double-click on the sequence. (clips should be offline if the reel name is added in the brower.)
n. Select all the clips in the browser in the ONLINE 720p24 sequence and choose RECONNECT MEDIA.
o. Point to the original digital negative clips that you demuxed in LHD. (ignore mismatch warning and all your clips should reconnect.
IMPORTANT NOTE: The above routine for going online worked will with FCP4 but now there exists a BUG in FCP5 in the Media Manager function.
BUG REPORT: When doing an offline and choosing "based on clip names" (which are NAME.MOV), Media manage will add .MOV to the source name resulting in NAME.MOV.MOV.
This is happening in FCP5. It never happened in FCP4. We've used this freature extensively before for online/offline editing workflow. The advantage of using clip name vs. file name in the browser is that you can edit a proxy and always keep track of its online version by naming the clip the same name as the online version. Now that it ads .MOV to the name, it's unusable - or you have to reconnect by hand rather than using hte "connect the clips based on relative paths" option.
CONNECTING ORIGINAL MEDIA: ONLINE OPTION #2
STICKING WITH APPLE INTERMEDIAT CODEC.
For now, it is possible to stick with the Apple Intermediate codec when going online and back through LHD to the JVC HD-100. If so, choose NONE compression when exporting a Quicktime from FCP for use in LHD. However, the best case will be to use the above option #1 when Apple gets around to fixing their bug with Media Manager.
Otherwise, you will have to reconnect all your clips to the original m2v’s manually to avoid the codec altogether.
About the Apple Intermediate Codec
The Apple Intermediate Codec is a high-quality video codec that Apple developed for use as an alternative to native MPEG-2 HDV editing in an HDV workflow. Instead of editing the MPEG-2 HDV data directly, you can capture video from the tape source and then transcode it with the Apple Intermediate Codec to optimize the video data for playback performance and quality.
Working with the Apple Intermediate Codec is less processor-intensive than working with native HDV. Unlike MPEG-2 HDV, the Apple Intermediate Codec does not use temporal compression, so every frame can be decoded and displayed immediately without first decoding other frames. The drawback of this codec is that it requires three to four times as much bandwidth and hard drive storage space as MPEG-2 HDV.
Data rates for the Apple Intermediate Codec are variable; the data rates and storage needed may vary slightly, depending on the complexity of your footage. Images with a lot of detail have a higher data rate, while images with less detail have a lower data rate.
Format and Data rate
MPEG-2 HDV 720p30……….2.5 MB/sec. (equivalent to 9 GB/hr.)
MPEG-2 HDV 1080i60/50……….3.3 MB/sec. (equivalent to 12 GB/hr.)
Apple Intermediate Codec HDV 720p30………. approximately 7 MB/sec. (equivalent to approximately 25 GB/hr.)
Apple Intermediate Codec HDV 1080i50………. approximately 12 MB/sec. (equivalent to approximately 42 GB/hr.)
Apple Intermediate Codec HDV 1080i60………. approximately 14 MB/sec. (equivalent to approximately 49 GB/hr.)
Frame Aspect and Dimensions
MPEG-2 HDV and Apple Intermediate Codec feature a 16:9 widescreen aspect ratio for all resolutions.
The 1080i format features 1080 lines (1440 pixels per line), interlaced, using non-square pixels to display a screen ratio of 16:9 (equivalent to 1920 x 1080). The 720p format features 720 lines (equivalent to 1280 x 720) with a progressive scan.
Color Recording Method
Both MPEG-2 HDV and Apple Intermediate Codec HDV record a 4:2:0 component (Y´CBCR) digital video signal. Each sample (pixel) has a resolution of 8 bits.
Note: This article was based on information from the HD and Broadcast Formats document (in Final Cut Pro 5, choose HD and Broadcast Formats from the Help menu).
EXPORTING QUICKTIME TO LUMIERE HD > JVC GY-HD100
1. Use the following settings when feeding a Quicktime file back to Lumiere HD if you plan on generating a 720p24 transport stream to the JVC GY-HD100 or BR-HD50.
2. Quicktime settings:
a. Resolution: 1280x720
b. Frame Rate: 23.976 (23.98)
c. Progressive
d. Audio on whole track.
e. Audio Settings: 48kHz, 16bit, stereo
f. Square Pixel.
3. Open LHD and select the TRANSPORT STREAM tab.
4. Select JVC 720p/24 (GY-HD100, BR-HD50) in the pulldown menu.
5. Select the HDMASTER tab and then choose your .MOV file.
6. Select the DESTINATION BUTTON under the TRANSPORT STREAM section.
7. Now return to the CAPTURE/PRINT tab in LHD and select the print to tape button. Choose your new edited TS (transport stream) file and Click OPEN and it will print to tape automatically.
Special Thanks to the following for their input to this document:
Frederic Haubrich
Neil Boone
Apple Docs: Article number 301599
Jerry -
Reading XML file having various foreign languages from web application.
Greeting..
I'm dealing with a so-called serious problem where-in:
I've to read one of the configuration files(XML files) having values in different foreign languages (like Chinese, Japanese, Arabic etc). I've to read that file contents, in as it is form, in such a way that user can read / change the data from the web application.
I'm showing the XML file inside the TextArea (the HTML <textarea> tag. While reading this file, it got converted to junk values instead of actual ones. While saving this file it changes those original values to junk in file as well.
I'm using SAX parser with DefaultHandler.
Better suggestions are welcome.
Thanks in advance
Regardsrikslovein wrote:
Better suggestions are welcome.You have a number of places where data corruption could occur. You have not yet identified where it occurs. When you know where it occurs it would be much easier to determine a solution.
Do NOT display the characters to determine the problem. Instead take a small sample and print the numeric values. And do that at each stage/layer until they do not match. -
How to merge portlet.xml file from shared libraries into an EAR application
Hi all
I need some help
I have some applications as shared-libs referenced by weblogic.xml into a EAR application.
To see all portlets from that shared-libs, I'm creating a portlet.xml into the EAR application with all portlets from all shared libs. But is terrible for me. I would like to have it merged automatically without having to create it in the EAR application. Is that possible?
Regards
BrunoIn the documentation, I saw this text:
Overriding Shared J2EE Library Settings in the web.xml File
At runtime, the web.xml files in all the shared J2EE libraries are merged, along with the web.xml
file in your portal web project. The content of your WEB-INF/web.xml file overrides anything in
the shared J2EE libraries, so if you want to change particular settings, you can do it there.
There are many other files for which file contents are merged; these can be overridden in the same
way. These files include not only WEB-INF/web.xml but also WEB-INF/weblogic.xml and any
files mentioned in weblogic-extension.xml from either the users' application or the shared
libraries.
It seems to be possible to customize the weblogic-extension.xml. But I haven't seen how to do that
What do you think about it?
Regards
Bruno -
System Crashed, LOST ALL photo files shows THUMBNAILS only now!
PLEASE help me to get back my pics! HOW can I COPY the THUMBNAILS and NOT loose my photos! If I try to open them or copy them they say "Searching for Missing File Location", then it says "Cannot continue requires at least one connected file"!
These are precious because they are 3 years worth and some family members are no longer with us! PLEASE HELP!
OS:WINDOWS XP SP#2
Photoshop Album Starter 3.0The program does not do screen captures for you, you would needs something else to help.
Set the thumbnail to maximum size - one per screen.
Now, if you hit the PrintScrn button on your keyboard it will place an image on the Windows clipboard. You would then need to go to an image editing program, paste it in, trim and save.
Alternatively, there are a load of [free] screen capture programs around that would help you automate this process. You might look here, for example: http://www.nonags.com/nonags/grcapt.html -
All imported files show a date of 12/31/2009; how do I change the date?
Every file I import into iPhoto has the date of 12/31/2009. When I view the file attributes in Finder, the date is different. My iMac date is current so files downloaded, for example, from Safari are saved with a current date. But when I import the files into iPhoto, they have the date of 12/31/2009. How do I correct the problem to allow imports to have the file's date?
Don't reset the PRAM, that's pointless. The date you're seeing seems to be the default set by iPhoto when importing images that have no creation date.
When I download photos into iTunes, it...: Apple Support Communities -
Problem Event Name:
BEX
Application Name:
iTunes.exe
Application Version:
10.5.3.3
Application Timestamp:
4f14cc3d
Fault Module Name:
CoreFoundation.dll
Fault Module Version:
1.630.15.0
Fault Module Timestamp:
4eb09717
Exception Offset:
000c4cd8
Exception Code:
c0000005
Exception Data:
00000008
OS Version:
6.1.7601.2.1.0.768.3
Locale ID:
2057
Additional Information 1:
b08f
Additional Information 2:
b08f00221970bd29782630deacc7f037
Additional Information 3:
2df0
Additional Information 4:
2df0972e5dbb33da1d2354bb8f3a48bcGo to support.microsoft.com/fixit
In section 2 click on: Install or upgrade software or hardware
Then click on the title in section 3: Fix problems with programs that cannot be installed or uninstall
This link may get you there: http://support.microsoft.com/mats/Program_Install_and_Uninstall/
Let it run and then try to download it again -
All My Files is showing too many files
I have a new iMac 27 and so now I'm trying to clean up the old iMac 24. When I run All My Files I can see a number of files that I want to remove from the old as they have successfully migrated to the new computer. But my problem is that "All My Files" shows files in an external drive I had used for back up. (not Time Machine but duplicate backups). How does it even see that drive. It's not hooked up and I've turned off the network wi-fi. It shows them on a tree starting with my user name and then desktop and then the external drive. In the past I have seen the external on the desktop but it is not their now as all externals are unconnected.
Then I went to a program called "Tidy Up" which is helpful in finding duplicate files and it too wants to list the unattached but previously used external hard drive. I'm afraid if I delete these files it will also drop them from that external drive which I don't want to do.
I suprised after deleting tons of duplicate files from the old (after successful migration) that it still shows I only have 145gb of a 1TB drive available. I want to delete the excess files but still keep a few on the old computer. What am I missing here. What's taking up all this space and how can I free up space? Do I need to run some kind of app like the old degragmenter used on Windows?Thanks for your help.
IOS - my bad, I meant to say let's just consider this a question regarding the operating system for the iMac24.
Yes, I emptied the trash
I have next to no music, less then 700mb of pictures and the videos are all showing as related to the external
drive in question.
Here's a photo of the page (neat trick). No other drives shown and yet when I go to that drive on my desktop and select a file it will play.
Here's my desktop that shows the icon for the external drive known as "1TB WD"
Here's a picture of my Finder. All of these files shown have an address that starts on the 1TB WD.
I added a file to this external drive in question from the old computer and then went to my other computer to where the drive is now connected and of course, they didn't show up. Yet when I click on any one of these icons it will play the file just like it's connected. To a novice like me it would seem that the hard drive has duplicated itself on my old system. If I go to the new computer where the drive in question is connected the Get Info says 999.96 GB drive with 265.81 GB available. If I do Get Info on the desktop icon on the old it reads 425.9 GB on disk for 194,555 items. Where is shown as /users/cwtidball/desktop. For Kind it says "Folder" where as the other computer calls Kind "Volume"
So it would appear that somehow a large portion of the external got copied and became a folder. Not my intent but now I guess I'll need to compare files to see if things were added to the "Folder" that should have been added to the "Volume".
Any other thoughts welcome. I appreciate your assistance. -
Show hidden files breaks "All My Files"
I'm trying to get my AMP stack back up on a new Mountain Lion Mac, which has become a larger pain since they removed Web Sharing. First step to getting the AMP stack up was to show hidden files:
defaults write com.apple.Finder AppleShowAllFiles YES
Then a restart of finder (option + right click Finder in dock > Restart), but this has completely killed "All My Files" showing anything. It's not like I really care about this feature of Finder, but still, just wondering if there is a different terminal command now for showing hidden files that doesn't break this. Hiding hidden files back to default does not fix "All My Files" either.
In addition, you can't double click any hidden folders, you have to right click and select "Open" or "Open Original" if it was an alias (ie etc).I can't reproduce the problem.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "mdworker" (without the quotes) in the Filter text field. Post the messages that appear in the Console window — the text, please, not a screenshot.
If there are runs of repeated messages, post only one example of each. Do not post many repetitions of the same message.
Some personal information, such as the names of your files, may be included — edit that out, too, but don’t remove the context.
Step 2
Do the same with the search string "mds".
Maybe you are looking for
-
How to set description for a DB table?
It is possible to get a description for a table, using databaseMetaData.getTables() , and then reading the REMARKS field, but how to change that description? I would assume, it should be possible, when one creates a new table, using SQL: CREATE TABLE
-
I used to be able to view my mail in landscape, but now it only comes up portrait... The lock is not on because the other items come up as landscape any suggestions?
-
How do I move photos that I've already imported?
I've imported some photos to the wrong folder. I could use IOS Finder to move the photos, but I worry that the links to LR will be loss. How do I move photos within LR? Thanks,
-
Can apple help me find my iPod touch 5g??? I have already reported it to the police and they haven't called back, i also have the find my iPhone app in it but I don't have the location thingy turned on so what else can I do to locate it pleazz help t
-
IPod Nano 2ed Gen will not sync my songs.
I have recently bought a Saosin (Bonus Track) album for a single song. I got the song and am extremely happy, so as I'm about to go to town earlier today, I put my iPod in to sync and update my songs. (Also, I originally couldn't download the album b