Optimization steps for Uncompressed cube

I am new to Oracle OLAP, I have designed a cube with 4 dimensions and three measures. Since I have measures like count of staff and hours encoding, I have to group (sum) # of staff and hours encoded for each team and roll up with its tree. At the same time, I have to show average staff memebers for a given period of time with sum of hours encoded. In order to override cube aggregation, I have to uncompress cube. This is resulting serious issues. Can you please suggest me what steps to be followed to optimize performance with same uncompressed cube.
Appreciate your support.

There are a few tricks to calculate averages in a compressed cube. The subject was discussed recently on the forum.
https://forums.oracle.com/message/10920684#10920684
The best way, if you can handle it, is to use the MAINTAIN COUNT syntax. But this may be a stretch if you are new to OLAP.

Similar Messages

Steps for creating a SAP Remote cube.

Hello Experts,
Can you anyone list the steps for creating a SAP Remote cube please?
Any step by step guide will be of really great help.
Thanks in advance.
Regards,
Kumar.

Creating VirtualProviders Based on Data Transfer Processes Locate the document in its SAP Library structure
Prerequisites
If you are using a DataSource as the source for a VirtualProvider, you have to allow direct access to this DataSource.
Procedure:
       1.      In the Data Warehousing Workbench under Modeling, choose the InfoProvider tree.
       2.      In the context menu, choose Create VirtualProvider.
       3.      As the type, select VirtualProvider based on data transfer process for direct access.
In terms of compatibility, a VirtualProvider that is based on a data transfer process with direct access can also be connected to an SAP source system using a 3.x InfoSource.
The Unique Source System Assignment indicator controls whether this source system assignment needs to be unique. If the indicator is set, you can select a maximum of one source system in the assignment dialog. If the indicator is not set, you can select multiple source systems. In this case, the VirtualProvider acts like a MultiProvider.
If the indicator is not set, characteristic 0LOGSYS is automatically added to the VirtualProvider when it is created. In the query, this characteristic allows you to select the source system dynamically: In each navigation step, the system only requests data from the assigned source systems whose logical system name fulfills the selection condition for characteristic 0LOGSYS.
       4.      Define the VirtualProvider by transferring the required InfoObjects. Activate the VirtualProvider.
       5.      In the context menu of the VirtualProvider, select Create Transformation. Define the transformation rules and activate them.
       6.      In the context menu of the VirtualProvider, select Create Data Transfer Process. DTP for Direct Access is the default value for the DTP type. Select the source for the VirtualProvider. Activate the data transfer process. See Structure linkCreating Data Transfer Process for Direct Accesss.
       7.      Activate direct access. In the context menu of the VirtualProvider, select Activate Direct Access. In the dialog box that appears, choose one or more data transfer processes and select This graphic is explained in the accompanying text Save Assignments.
Check this for little extra info:
/thread/142088 [original link is broken]

Steps for cube partioning

hi gurus
can any one tell me detail steps for cube partioning .And what is the use.
regards
karan

Follow these thread
Partitioning of the Cube
http://help.sap.com/saphelp_nw04s/helpdata/en/0a/cd6e3a30aac013e10000000a114084/frameset.htm
Partitioning Fields and Values
partition of Infocube
Partitioning of cube using Fiscal period
Infocube Partition
Khaja

Steps for Data extraction from SAP r/3

Dear all,
I am New to SAP Bw.
I have done data extraction from Excel into SAP BW system.
that is like
Create info objects > info area> Catalog
--> Character catalog
--> Key catalog
Create info source
Upload data.
create info cube
I need similar steps for data extraction for SAP R/3
1. when data is in Ztables ( using Views/Infosets/Function etc)
2. When data is with Standard SAP using Business Content.
Thanks and Regards,
Gaurav Sood

hi,
chk the links
Generic Extraction
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
CO-PA
http://help.sap.com/saphelp_46c/helpdata/en/7a/4c37ef4a0111d1894c0000e829fbbd/content.htm
CO-PC
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
iNVENTORY
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Extractions in BI
https://www.sdn.sap.com/irj/sdn/wiki
LO Extraction:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Remya

Migration Problem in 2lis_11_vaitm for info cube 0SD_C03(Sales Overview)

Dear Experts
I am facing an issue for the data source 2lis_11_vaitm and 2lis_11_vcitm for info cube 0SD_C03. When i create transformation on update rule, it gets created with warnings but no issues. When i try making a transformation on update rule it gives errors about abap routines and start routines. Then i would go for migrating 2lis_11_vaitm but that cant be done because of above mentioned error. I have migrated other data sources same way. The reason i am doing so is because of making exact transformations as trsansfer and update rule.
My objectives is migrating 2lis_11_vaitm and 2lis_11_vcitm to 7.X etl flow. Am I right on the sequence of steps? cause my main issue is when my info package starts writing data in PSA in errors out for both 2lis_11_vaitm & 2lis_11_vcitm. The IDOC has the same problem. So migrating seems to be the only solution. Plz help and FYI my patch levels on bi system.
compo           Rel.              SP-lev.           Supp. pack                        Desc.
SAP_ABA     701     0010     SAPKA70110     Cross-Application Component
SAP_BASIS     701     0010     SAPKB70110     SAP Basis Component
PI_BASIS     701     0010     SAPK-70110INPIBASIS     Basis Plug-In
SAP_BW     701     0010     SAPKW70110     SAP Business Warehouse
BI_CONT     706     0000     -     Business Intelligence Content

The errors I face during the transformation activation while making them on the update rule are following.
Start Routine: Syntax error in routine
Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_2S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_3S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_4S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_5S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_6S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0QUANT_B, group: 01 Standard Group): Syntax error in routine
Rule (target: 0DOC_ITEMS, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0COST_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0GR_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NT_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0VOLUME_CDM, group: 01 Standard Group): Syntax error in routine
Rule (target: 0HDCNT_LAST, group: 01 Standard Group): Syntax error in routine
Rule (target: 0BP_GRP, group: 01 Standard Group): Syntax error in routine
Rule (target: 0CP_CATEG, group: 01 Standard Group): Syntax error in routine
Rule 39 (target field: 0CRM_PROD Group: 01 Standard Group): incomplete master data rule
Rule (target: 0DEB_CRED, group: 01 Standard Group): Syntax error in routine
Rule (target: 0DOC_CLASS, group: 01 Standard Group): Syntax error in routine
Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
Key rule 44 (target field: 0VERSION): Initial update set
it has as many routine as many syntax errors in routine.

Why we will go for Remote cube

Hi experts,
Why we will go for Remote cube instead of Basic cube, What are the advantages of Remote cube ? At what circumstances we wii go for Remote cube ?

Hi,
the reason is.
Use SAP RemoteCubes if:
·        You need very up-to-date data from an SAP source system
·        You only access a small amount of data from time to time
·        Only a few users execute queries simultaneously on the database.
Do not use SAP RemoteCubes if:
·        You request a large amount of data in the first query navigation step, and no appropriate aggregates are available in the source system
·        A lot of users execute queries simultaneously
·        You frequently access the same data
link:
http://help.sap.com/saphelp_nw04/helpdata/en/da/5909392a430303e10000000a114084/frameset.htm
Regards,
Senthil

Maintenance Optimizer Step 2 - Select Files cannot view

Hi,
We're using Solman 7.0 EHP to download EHP4 for ERP 6.0. We have maintained in SMSY, system type = ERP 6.0.
From the Maintenance Optimizer step 2- Select files, we cant see both the option of "maintenance" or "enhancement package installation" as shown in the SAP guide. The only option is "Find Download Files" button. Anyone here experience this issue before ?

Hi,
First of all, please make sure that:
- You are a registered ramp up customer.
- The S-user defined in AISUSER in solution manager has the
authorization to download ramp-up installation files.
Also make sure that you have installed all the notes listed in
1122966 for your Solution Manager release.
The option of installing Enhancement Packages in an ERP 6.0
system is only offered in the Solution Manager Maintenance
Optimizer if the systems assigned to the process are assigned to
the product version ERP 6.0 or ERP 2005 in the Solution Manager
system administration (transaction SMSY).   The product version
ECC 6.0 must not be used for the installation of Enhancement
Packages. The attached Note 1022072 describes step by step how to
change a product version assigned to a system.
The following notes should also be usefull:
   1134872 : Maintenance Optimizer: FAQ for Stack Delta Files in EPS
   1156571 : Maintenance Optimizer: Download Basket and SLM Download
   1168160 : MOPZ: Unicode selected automatically
   1170592 : MOPZ: S-User Enhancement
   1233954 : MOpz: No XML would be generated in EPS inbox
   1277035 : Solution Manager: EHP4 product data missing
Best regards,
Felipe Pitta

Post Installation steps for Solution Manager 4.0

Hi Experts,
Please can you guide me if there are Post Installation steps for Solution Manager 4.0!If so can you explain me.I have successfully installed the SolMan 4.0.
Thanks & Regards
Sunil

Hi
In installtion guide you can find the information you needed also check
Visit for step by step details of Standard Configuration of Basic Settings
www.service.sap.com/rkt-solman->select solution Manager 7.0>technical Role-->Technolagy
&system administartion just drill out there you can find lot of simulator how to install and
configure solution manager
https://websmp109.sap-ag.de/~sapidb/011000358700000424922008E.sim
https://websmp109.sap-ag.de/~sapidb/011000358700000525622007E.sim
and for Maintenance optimizer setup
https://websmp109.sap-ag.de/~sapidb/011000358700000086852008E.sim
https://websmp109.sap-ag.de/~sapidb/011000358700000086862008E.sim
Let me know if needed more information
Regards
Uday

Transformations for Remote cube?

hi experts,
can we create Transformations for Remote Cube?
plz provide me the steps to create Remote Cube.
regards
venuscm

HI,
Yes you can create transformations for remote cube.Remote cube is similar to standard cube but while creation select radio button for remote /virtual cube .
Steps for creating remote cube, chk the help link-
http://help.sap.com/saphelp_nw04/helpdata/en/da/5909392a430303e10000000a114084/frameset.htm
Hope this helps.
thanks,
Rahul

Best options for uncompressed HD master?

I've just finished my first feature-length project in HDV on FCP, and I have some questions about output. In the past I've always been editing SD DV under 60 mins, so master output was always easy. But between the HDV and the 90 min. run time, things are a little more complicated.
We shot and edited in native HDV 1080/60i. We've rendered our final master sequence in HD ProRes, but I don't know where to go from here. These are my main questions:
1. My primary distribution is going to be SD DVD, but I want to keep an uncompressed HD master file backed up on multiple hard drives. What's my best output option for such a file? Can I just export a self-contained QT in sequence settings? Will that apply compression I don't want? Is there a better output option in Compressor?
2. Keep interlaced or deinterlace? Again, most people will be seeing this as an SD DVD.
3. I'd also like to get a local video outfit to make an HD tape master for more secure long-term archiving. What tape format is recommended?
4. Question I should have asked but didn't? Please, do tell.
Thanks in advance for any help.
Stu

Ken Summerall, Jr. wrote:
The absolute best quality that you are going to get is by exporting a QT movie using current settings and making it self contained. Since you shot and edited in an HDV sequence this will add no further compression (remember that HDV is already heavily compressed).
Uh-oh. That's not actually correct.
HDV is relatively unusual as shooting formats go, in that it's a GOP format, as opposed to an I-frame format. In I-frame formats, each frame of footage (or pair of fields, if you're shooting interlaced) is compressed all by itself, independently of all other frames (or field-pairs). But in a GOP format, a number of frames are compressed together — that's what "GOP" means: "group of pictures." The first frame is compressed independently, then the next frame is described in terms of what's different from the previous frame.
When you edit HDV +and then export it as HDV again,+ whether to videotape or to a Quicktime, the GOPs must be "conformed." As you edit, you make cuts that break the GOP structure, so the timeline cuts from the middle of one GOP to the middle of another without including the first frame on which that second GOP depends. So when you export or lay off, Final Cut has to go through and convert a bunch of I-frames to B- or P-frames, and convert a bunch of B- or P-frames to I-frames.
In essence, exporting or laying off HDV imposes a compression hit. You will reduce the quality of your footage.
Since the question was about the best option for mastering, HDV is +definitely not it.+ Would it be okay? That depends on the footage, and on how picky you are. But it's not the best option. The best option is to master to a (ha ha) mastering format. Uncompressed 8-bit, Uncompressed 10-bit and ProRes are good choices here.
As for tape … that's tougher. You can absolutely send an uncompressed or ProRes Quicktime file to a dubbing house and get it laid off to videotape, but the question is to what format? HDV is a poor choice, because of the aforementioned compression hit you take when conforming the GOPs. DVCPRO HD would actually be a step down for you, because it would downsample your 1440x1080 native footage (or your 1920x1080 master, if you chose to upres) to 1280x1080.
That leaves HDCAM and HDCAM SR. If you've done things like color correction or compositing in a 10-bit color space — or even long-slow dissolves to or from black, which is one of the places where 8-bit really falls apart on you — choose HDCAM SR. HDCAM is an 8-bit format only, and you'll lose color precision if you go to that format. But if you stayed 8-bit all the way through your workflow, then you can go to HDCAM without any real problems.
Note that both HDCAM and HDCAM SR +are compressed formats.+ Your only option for uncompressed HD videotape is D6, and good luck finding a Voodoo recorder nearby. But HDCAM and SR are good enough for professional mastering, so they'll surely be good enough for you as well. And they're both available in 94- and 124-minute lengths, so you can master your whole feature on a single tape.
(While you're at it, consider getting your uncompressed or ProRes master file dubbed off to a data tape format as well. You worked really hard on this project, so it makes sense to be a little paranoid about preserving the fruit of your labors.)

Maintaining BWA for a Cube

Dear SDNers,
We are planning to create Cube for a report we will be using BWA for this. So to maintain BWA to that Cube do we need to create Aggregates and roll up then we can maintain BWA ? Which is the best method Directly maintain BWA on Cude or maintain Agreagates and BWA is best method
Thanks,
Swathi

Swathi,
You need to create an initial index first. Then going forward, you will need to add a BWA Roll-up step to your process chain for this cube. Also you need to add another step to your master data change run process chain.
Have a copy of the Technical Operations Manual. Under the data activation and changes to data sections you can find more info
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/301d5c25-2cba-2c10-d491-9af8d495c253
Cheers
Tansu

Steps to compress Cube

Hi Gurus,
I need full detail steps while doing cube compression, thanks Dave

Hi Dave,
Basically when you create a cube 2 tables created ,they are F and E tables.
When you load the data, data loaded into F table.
Compression is a process, to compress the data in fact table. Generally when you do compression all the request ids are deleted and data moved in to E table.
There may be data with same characteristic combination and with different Req ids, these records can be compressed.
For this,
Right click on Cube -> manage -> goto Collapse tab -> provide Request id ( defaultly it will take the latest successful request) -> Click on Release.
Then all the data moved to E table. Now you cannot delete data request wise.
If you want to delete data you need to do reverse posting.
I think this will helpful.

Ipod not recognized by itunes...next step for nike+

when i started to set up the nike+ i downloaded the new version of itunes then later downloaded the new software update for the ipod nano...now when i plug the ipod into the computer using the usb cord, i get a message that says this...The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software....i have attempted to install, reinstall, remove and install again, itunes and the updated software... yet it still will not recognize the ipod when it is plugged in. How do i get the ipod to be recognized and then what is my next step for using the Nike+ shoes?
ipod nano

I can't even get the tab that says Nike+ when I am trying to sync up. I can't get it to even go on to the Itunes. I can purchase music no problem

Step for Publish a development created with Webdynpro for Java

Good Afternoon.
I am new in this of publish development in the portal.
We created a development with Webdynpro java using RFC. We want know what are the step for publish this development in the portal ESS?
The development work fine. But i don't know how to publish this in the portal.
What configurations i have that do In the part of ECC and in the part of portal.?.
Can someone help me?
Kind Regards-

Hi,
When i have that do configurations for the following paths:
Employee Self-Service>General Settings>Homepage for Self-Services-->Resources
Employee Self-Service>General Settings>Homepage for Self-Services-->Headers and Area Group Pages
Employee Self-Service>General Settings>Homepage for Self-Services-->Areas
Employee Self-Service>General Settings>Homepage for Self-Services-->Subareas
Employee Self-Service>General Settings>Homepage for Self-Services-->Services.
Kind Regards,

Step by step for 2.6

So I think im finally ready to make the plundge to the 2.6 kernel.
So I need some help. Ive only compiled a kernel a few times, and I never changed many settings.
So could someone give a step by step for it (being sure to list any arch-specific quirks)? I would greatly appreciate it.
Also, I hear theres a patch that lets you run the Official Nvidia drivers with the 2.6 kerne, has anyone gone through this? I really have no idea how to go about doing this,as i've only ever installed the .run file.
Any help would be appreciated.
Also, its possible to switch between the 2.4 and 2.6 kernel, right? (obviously with a reboot).
Lastly, Is a new release of the 2.6 due out anytime soon? I dont want to download and compile this just to find a new version comes out.

You have to use module-init-tools which supercedes modutils. I made a PKGBUILD for it for my local system simply so I could uninstall it easier if I wanted. However, you still need the old modutils as well.
Here is my hack to get module-init-tools working:
1. Use the PKGBUILD below to compile and install module-init-tools.
2. For each of modprobe, lsmod, rmmod, depmod, and modinfo from modutils, rename those to modprobe.old, lsmod.old, etc. To find where these binaries are, use "pacman -Ql modutils".
3. Create symbolic links from the binaries that modutils used to provide to the new binaries that module-init-tools provides. Again, use "pacman -Ql module-init-tools" to figure out where the new ones are.
Example - modutils provides /sbin/lsmod. Rename that to /sbin/lsmod.old. module-init-tools provides /usr/bin/lsmod. Create a symbolic link as follows:
[root@limbo root]# ln -s /usr/bin/lsmod /sbin/lsmod
If you aren't 100% sure what i am trying to say here, don't try any of it, or you will bork your system. Also, this is more of a hack, and that's why I didn't upload the package to incoming. I only made the PKGBUILD to keep track of where everything was going.
Anyway... hope this helps you on your way to:
[john@limbo john]$ uname -r
2.6.0-test5
[john@limbo john]$
PKGBUILD
pkgname=module-init-tools
pkgver=0.9.13
pkgdesc=""
url="http://www.kernel.org/pub/linux/kernel/people/rusty/modules/"
depends=()
conflicts=()
backup=()
install=
source=(http://www.kernel.org/pub/linux/kernel/people/rusty/modules/$pkgname-$pkgver.tar.gz)
build() {
cd $startdir/src/$pkgname-$pkgver
./configure
make || return 1
make prefix=$startdir/pkg/usr install

Optimization steps for Uncompressed cube

Similar Messages

Maybe you are looking for