Transformations for Remote cube?

hi experts,
can we create Transformations for Remote Cube?
plz provide me the steps to create Remote Cube.
regards
venuscm

HI,
Yes you can create transformations for remote cube.Remote cube is similar to standard cube but while creation select radio button for remote /virtual cube .
Steps for creating remote cube, chk the help link-
http://help.sap.com/saphelp_nw04/helpdata/en/da/5909392a430303e10000000a114084/frameset.htm
Hope this helps.
thanks,
Rahul

Similar Messages

Is extractor 0FI_GL_4 (line items GL) available-compatible for remote cube?

Hi,
Is 0FI_GL_4 available-compatible for Remote cube? I changed parameter virtcube from space to '1' value. But when I regenerate DS in RSA6 virtcube parameter-value comes back to space. In RSA6 I see value 'D' (direct access) always.
Thanks

We donu2019t have ehp3, so i cant use 0FI_GL_14.
Can we really compare 0FI_GL_14 and 0FI_GL_10 ?
Because 0FI_GL_10 extracts not on document level but I need information (Work breakdown structure element(PROJK)) on document level.
So I need both fields in extract structure u201CAccounting document number (BELNR)u201D and u201CWork breakdown structure element(PROJK)u201D.
0FI_GL_10 contains none of them.

How to make use of 3EC_CS_1R for remote cube.

hi all,
I have activated the 3EC_CS_1A for consolidation reports but would like to use 3EC_CS_1R DataSource for remote cube, we have not installed SEM-BCS on the BI system, when trying to use the 3EC_CS_1R on the BI system, it complaints the DataSource can only be used by SEM-BCS. what is the best way to utilise this DataSource?
do I need to install SEM-BCS in order to use this DataSource? Can I just install BCS component only?
I am slightly confused as where SEM-BCS should be installed, on BI or ECC system?
cheers.
Message was edited by: Joe
Joe Wong

no longer relevant

Why we will go for Remote cube

Hi experts,
Why we will go for Remote cube instead of Basic cube, What are the advantages of Remote cube ? At what circumstances we wii go for Remote cube ?

Hi,
the reason is.
Use SAP RemoteCubes if:
·        You need very up-to-date data from an SAP source system
·        You only access a small amount of data from time to time
·        Only a few users execute queries simultaneously on the database.
Do not use SAP RemoteCubes if:
·        You request a large amount of data in the first query navigation step, and no appropriate aggregates are available in the source system
·        A lot of users execute queries simultaneously
·        You frequently access the same data
link:
http://help.sap.com/saphelp_nw04/helpdata/en/da/5909392a430303e10000000a114084/frameset.htm
Regards,
Senthil

Getting unkown errors while running the listcube for remote cube

Hi we r trying to run the listcube for remote cube .We are trying to access the oracle data by creating views and pulling it into bw using remote cube through UDConnect
We r getting uknown errors like below
Messages for DataSource 6BTV_HISTORY_FXD_CST1 from source system DB2CX
System error: Message type is unknown.
Error reading the data of InfoProvider ZR_CHFCB
If any one face the similar issue please reply me back .

Remote cube doesn´t store data in BW....it only access data from remote system and shows in a report.....the listcube TX need to find a data table in order to show the information but in this case tha remote cube doesn´t have anything.....
Regards

Error in ListCube for Remote cube - Error in substep

Hi All,
To start with the details, I've 7.0 version datasource in APO and I've created Remote cube / Virtual provider Based on Data Transfer Process for Direct Access with transformation and some routines in rules.
I've also an "End Routine" as shown below
DATA RSLT_PKG_ROW TYPE tys_TG_1.
LOOP AT RESULT_PACKAGE INTO RSLT_PKG_ROW.
RSLT_PKG_ROW-/BIC/ZTEST_QTY = 2.
MODIFY RESULT_PACKAGE FROM RSLT_PKG_ROW.
ENDLOOP.
My list cube runs fine and gives the required data without the above end routine for ZTEST_QTY.
when I add the above code in my end routine for populating data for ZTEST_QTY, it is throwing an error message
Error reading the data of InfoProvider
Error in substep.
someone please throw some light on this.
Thanks
KI

Modify your code to this:
CONSTANTS: c_2(1) TYPE n VALUE 2.
LOOP AT result_package
INTO <result_fields>.
<result_fields>-/bic/ztest = c_2.
ENDLOOP.
Since the FIELD-SYMBOLS of <result_fields> has been automatically declared in the End Routine, there's no need to define a work area and modify the internal table with the data from the work area.

Function module for Remote cube

Hi all
I just want to know, does the remote cube works for the datasource which is based on function module.
Regards
Preeti

Preeti,
the Remote cube works on any type of datasource .as this datasource is already replicated into BI system then it is a BI datasource only.
but at the time of extraction of data,the datasource fetch the data from the respective tables specified in the Function module.by applying the logic to the data.not to the fields.
so the logic applies only to data not to fields.

How to Create Process Chain for Remote Cube.

Hi,
I created Remote info cube, data from ECC, loaded Successfully, I want to create Process Chain for Reomte Cube, Please Help me.
Thanks,
Nandish Gowda

Hi Nandish,
After initialization, th next delta will come as per your delta nature, if it is 0calday: Then your next delta will come tomorrow only.
If you are able to 7 records in RSA3, why not in PSA( Why it's only 5 records). Analyze this closely.
Sometimes, RSA3 exactly doesn't match with PSA because, RSA3 works on update mode F.
Regards,
Suman

BAPI's for remote Cube very urgent

Hi,
I want to activate the cube 0FIGL_R10 and 0TRCM_RC1. Can anyone guide me what needs to be done. I jave activated the cube from Business Content. When I try to execute the query it is not running .
please help as it is very urgent for me ..
Regards
Baljit Singh

Hve a look at this:
Need step by step process for creating remote cube
Regards

Error reading the data from the remote cube

Hi all,
When we try to get the data for remote cube from LISTCUBE, we are getting the following msg.
1) Messages for DataSource 9AUPA_DP_HK_01 from source system AD1CLNT100
2) 224(/SAPAPO/TSM): No planning version selected
3) Errors have occurred while extracting data from DataSource 9AUPA_DP_HK_01
4) Error reading the data of InfoProvider UICHKRMTC.
Any Inputs?

Hi,
Check whether the sourcesystem is responding.
And also in the error mesg: 224(/SAPAPO/TSM): No planning version selected
It seems you have not selected any planning version. Give any planning version in the listcube selection screen and execute.
Regards,
Ravi Kanth

BI Content Update rules not available for 0IC_C03 cube

Hi
We have recently did technical upgrade to our DEV box and made a system copy for sand box. I am trying to install the BI content for 0IC_C03 infocube. I cant see update rules for this data flow. I could see Transformations and can also see info source (ex: 2LIS_03_BF_TR) which we dont expect. We havent migrated or never used inventory BI content. What is the reason we could see transformations for this cube data flow in BI content? We are on SP15. I tried to install transformations but cant install them properly.

Hi A,
Business content it's still using 3.x data flow. That's why you see a 3.x infosource.
You won't have transformations for this. The update rules icon is like a transformation but with a small white square on the left.
So the dataflow you should have is:
Cube
Update Rules (0IC_C03 2LIS_03_BF)
    3.x InfoSource (Material movements (as of 2.0B))
      Transfer Rules
        Datasource
You'll see a small square next to all the objects, except for the cube. This means 3.x object.
Hope this helps.
Regards,
Diego

Source system Assignment for Virtual Cube

HI,
I transported infosource and transfer rules to production, but source system is not transported. if i am right i think i need to assign source system(prd) manually. but in prd all objects are not changeble, then how can i assign the source system to infosouce.
Regards
Rajini

HI,
I transported infosource sucessfully to production , but when i am trying to transport transfer rules , giving warning source system is not transportable. this is happening with remote cube only. all other normal transports are fine.
i think there is a special way to transport TR for remote cube. pls. help me.
Rajini

Authorization for running report based on Remote Cube

Hi ,
I have created a report based on Remote cube in BI 7.0
I have created a DTP with Direct access to load the Remote cube.
While running the report based on Remote cube , I am getting error
'You are not authorized for the DTP '
The report is running only when I assign the '*' value to the authorization objects for the role in which the report is stored:
S_RS_DTP = * (For DTP)
S_RS_TR = * (For Transformation)
S_RS_DS = * (For datasource)
I want to restrict the values to the objects related to my report only rather than * which means ALL.
Please help what values to assign for these authorization objects for the Role.
Thanks.

Hi,
You need to make necessary settings in RSECADMIN for the Authorization Objects. The default values will be * . You have to customize them to suit your requirement.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/101fb4f5-eb7c-2c10-5daa-b479c47f0a14
Regards,
Suman

Steps for creating a SAP Remote cube.

Hello Experts,
Can you anyone list the steps for creating a SAP Remote cube please?
Any step by step guide will be of really great help.
Thanks in advance.
Regards,
Kumar.

Creating VirtualProviders Based on Data Transfer Processes Locate the document in its SAP Library structure
Prerequisites
If you are using a DataSource as the source for a VirtualProvider, you have to allow direct access to this DataSource.
Procedure:
       1.      In the Data Warehousing Workbench under Modeling, choose the InfoProvider tree.
       2.      In the context menu, choose Create VirtualProvider.
       3.      As the type, select VirtualProvider based on data transfer process for direct access.
In terms of compatibility, a VirtualProvider that is based on a data transfer process with direct access can also be connected to an SAP source system using a 3.x InfoSource.
The Unique Source System Assignment indicator controls whether this source system assignment needs to be unique. If the indicator is set, you can select a maximum of one source system in the assignment dialog. If the indicator is not set, you can select multiple source systems. In this case, the VirtualProvider acts like a MultiProvider.
If the indicator is not set, characteristic 0LOGSYS is automatically added to the VirtualProvider when it is created. In the query, this characteristic allows you to select the source system dynamically: In each navigation step, the system only requests data from the assigned source systems whose logical system name fulfills the selection condition for characteristic 0LOGSYS.
       4.      Define the VirtualProvider by transferring the required InfoObjects. Activate the VirtualProvider.
       5.      In the context menu of the VirtualProvider, select Create Transformation. Define the transformation rules and activate them.
       6.      In the context menu of the VirtualProvider, select Create Data Transfer Process. DTP for Direct Access is the default value for the DTP type. Select the source for the VirtualProvider. Activate the data transfer process. See Structure linkCreating Data Transfer Process for Direct Accesss.
       7.      Activate direct access. In the context menu of the VirtualProvider, select Activate Direct Access. In the dialog box that appears, choose one or more data transfer processes and select This graphic is explained in the accompanying text Save Assignments.
Check this for little extra info:
/thread/142088 [original link is broken]

Help required for a Remote cube query

Hi,
We are working on Remote cube, which has a source from a view built on R/3 base table. I need to extract the data to BW based on a current date due to huge volume of data(performance reasons) in the table. I have used an exit on R/3 to restrict to current date but the extract checker was showing the valid data ie only for current date. When i had built a query on Remote cube, the Report was showing complete data(restriction not working). We have even tried using an inversion routine in transfer rules to pass the selections to the Source system even then it doesn't work. Could you help if you have come across same kind of situation or you can suggest an alternate solution on the same but we have to use Remote cube.
Any suggestions asap would be highly appreciated and rewarded with full points.
Regards,
Raj

I can think of two ways to do it
Simple with no ABAP coding is a view
Create a view between a timestamp table and your big table
Put an entry into your timestamp table of the current date - then use a selection of this inside the view
Unforutunately you cannot use SY fields inside database views (otherwise you could have used these as a selection condition in the view)
The best way to do it is using a function module and passing the data from the query into the SQL statement
I prefer to do it the last way and also pass data through a generic structure - thus you manipulate the data inside the intial loop in the function module and don;t utilise further loops downstream in transfer rules
(to try and keep the reponse time down)

Transformations for Remote cube?

Similar Messages

Maybe you are looking for