Optimize for Screen Display

Hello Community,
I have written a manual for creating a design. It contains some screen shots and examples. If I convert it from MS Word .doc to pdf format, it still looks good printed, but on the screen all used graphics are blured and have patterns like gif files with low color palettes. If I set the acrobat reader to 87% the size is good. I think the used screen shots which originally are in .gif format are put into wrong size.
How can I tell the pdf maker to work with original pixel, to keep the pixels of an image 1:1 and ignore the cm / inch?

Ok, I'm a bit smarter now. If I open the new pdf with reader 7 the graphics are in normal size at 100%. If I open the same pdf in Acrobat 9 pro everything is a bit to big with the "original size" setting, so the graphics are blured, because they get streched. It is a problem of displaying, the pdf seems to be ok, cause it looks good printed and good in Reader 7. But how can I know how the result will look at the users screen and why is the same file different in two reader versions?
and there is still the problem with the pattern / diffusion / noise whatever is the best word for it.

Similar Messages

Set "optimize for screen display" at runtime?

Hi,
is it possible to set the option "optimize for screen display" at runtime when using the CR2008/.NET 2.0 runtime?
Best regards,
Florian

Ok, I'm a bit smarter now. If I open the new pdf with reader 7 the graphics are in normal size at 100%. If I open the same pdf in Acrobat 9 pro everything is a bit to big with the "original size" setting, so the graphics are blured, because they get streched. It is a problem of displaying, the pdf seems to be ok, cause it looks good printed and good in Reader 7. But how can I know how the result will look at the users screen and why is the same file different in two reader versions?
and there is still the problem with the pattern / diffusion / noise whatever is the best word for it.

Fixed Zoom increase for screen display?

Like IE has, I want to enter a fixed zoom amount for the entire firefox display, not just a one page at a time selection.
Higher resolution screens tend to make web page displays smaller and I'd like to increase Firefox for its entire display, say to 130%.

The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: 
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: 
https://addons.mozilla.org/en-US/firefox/addon/2592/

ITS Source of Output for Screen Display?

I have two sessions:
The first, has the cancel button (GIF) on the screen and the source code looke like this=>
Z_W02_PROCESS_SCREEN&QS_PROCESS=CANCEL_ORDER&QS_ORDER_NUMBER=0000287690">
<img src='/sap/its/mimes/Webrfc/sapicons/s_b_canb.gif'></a></td>
The second, does not have the cancel button (NO GIF) and the source code looks like this=> Z5_W02_PROCESS_SCREEN&QS_PROCESS=CANCEL_ORDER&QS_ORDER_NUMBER=0000288636">
</a></td>
One is a GIF, one is a font where is this config at? In SAP or ITS?
Someone suggested I look in SE80, Internet Service, WEBRFC. I do not see this in SE80?
Thank-You.

Hello Tom,
actually, it is hard to tell without further information. I suggest to have a look at the HTML document's source code (in the browser use the [Ctrl] + Right Click on the dynpro area; in the browser context menu select View Source ...). At the top of the source code you will find some information about the ITS used and also about the template used to generate this HTML document. This should be the template you want to have a look at. In case of subscreens used in the dynpro there might be some more comments like this in the document's source.
In some cases SAP icons will be used for buttons. In that case an appropriate GIF will be requested and shown automatically (those @n@ icons).
Best regards,
TJ

Tints and CYMK - Whats the difference for screen display and print

Hi,
What is the 'technical' difference between a tint and CYMK? For example, if i create a box with a fill of C:0 Y:0 M:0 K:40 is this the same as a black fill with 40% tint?
Knowing that all screens and printers give different results, is the difference even noticeable? What about 'best practice' / 'industry standard'?
Workflow/context- I create artwork (documents with combinations of images, graphics and text) in either Ai or ID which all go to PDF and I present them either on screen or through print (regular printer - none of my printed artwork use printing plates).
Thanks for your advice in advance.

A tint is just a lighter version of your swatch, so yes, 0,0,0,40 CMYK is exactly the same as using the [Black] swatch and setting the tint field in the panel down to 40% or creating a tint swatch with a 40% value.
Not all colors are CMYK. On screen you use RGB and most desktop printers expect RGB data as well. On press you might use spot color inks if you have only one color and tints of that color to add, or you need some color that can't be easily produced in CMYK in a full-color job. You probably shold not be using spot color in your work since you don't go to press and printer simulations of many spot colors are quite bad. You'll find the really saturated colors tend to be out of range for most printers, too, if you use RGB, but if you can accept that your printed output may not match the screen (and unless everything in the workflow is calibrated, including ALL the monitors you might be working with and all the printers you might use for output, output on remote devices probably won't match what you see on your own monitor and printer), I would design for the screen if that's the primary presentation and let those out-of-gamut colors geet clipped in print.
Printing tints is a little trickier than you might think. Dot gain (how ink spreads as it is absorbed into paper) tends to make tints seem a little darker in print.

HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>

It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?

My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?

Wow! I think I had this same issue just last night.
I was cleaning my macbook pro retina on the outside. Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly. It looked super strange, it was like green halo's and it looked worse when looking at it at an angle. Of course I took no pictures!!! I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
But I digress... The image looked very green and spacey, it was almost a neat effect. After about 5 minutes it started to look a little more digital though. There were straight lines of this halo effect on the edges and top. After about 10 minutes it turned into a predominate issue with the blacks on screen. I could open a web browser and it was unnoticable on a white background. After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle. After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange. But I believe that might be all in my head now.
So yerp, lemme know what you guys figure out.

Optimize Slide size for McBook display. Is 1280x792 the perfect format?

Using any of the proposed format in Keynotes 09 will leave you a dark bar on both left and right side. Hence I've changed the slide setting to 1280x792 and it really fits nicely on the screen for any display.
Haven't tried yet with a video projector or on printed material, yet I'm assuming people who will use the presentation will just view it on their laptop.
Have anyone of you tried this as well. Any experience to share? Thanks
Laurent

". A dedicated removeable rechargeable battery (not AA/AAA) When MP3 players have a dedicated, non-standard rechargeable battery, the MP3 player also doubles as the battery charger. I don't want to use rechargeable AA/AAA batteries, because unless the MP3 player has a built-in AA/AAA charger (I highly highly doubt any MP3 player charges standard batteries), I'd have to be lugging around either a bunch of batteries or a AA/AAA battery charger. And that kills the point of being portable. "
AA and AAA rechargeables are great. One can usually charge up to four at a time with most chargers, and chargers that take an hour or less are available(the 5 minute chargers require special batteries and put excessi've strain on the batteries). They are also very inexpensi've. Carrying a few spares is no big deal. I have small plastic cases that were specifically made to hold 2 AA or AAA batteries and other cases specifically designed for 4 of them. I would hate to have to swap out the player battery, swap in the spare then plug the player in just to charge spares one at a time. Proprietary batteries are expensi've, while AA or AAA nimh rechargeables are often around $0 or so for 4(for the higher capacity ones. Slightly lower capacity ones are even cheaper).

"8. A Built-In USB Port The only two players that I have seen like this are the iPod Shuffle and the Zen Nano/Nano Plus. This is a great benefit to me in the fact that I don't need any cables or anything. Literally nothing else. Just the player itself. All I have to do is plug it in and that's it. No carrying around anything else if I want music from someone's computer. So easy and convenient...."
I prefer having a smaller player that uses a cable to connect.

HP On-Screen Display Utility for HP Envy 14 Beats LTD.

I had my hard drive replaced because the stock HDD stopped working abruptly. A fresh install of windows left me with a number of missing drivers an utilities. I found most from software and drivers hp support page for my notebook but there's one problem I could not find the solution for.
I gather that I need the HP On-Screen Support Utility for my notebook because pressing the brightness and audio buttons no longer brings up the on-screen slider. Additionally, the Beats logo doesn't show up with the FN+B function.
Product name: HP Envy14 Notebook PC (Beats Limited Edition)
Product number: XB110AAR
Windows 7 Home Premium 64-bit Service Pack 1
This question was solved.
View Solution.

SOLVED:
A little more research and I found that the On-Screen Display Utility (OSD) is actually part of HP MediaSmart. It can be downloaded from the following HP thread:
HP Mediasmart Software package for Windows 7
Hope this helps other users!

Quick way to change "Optimize for" setting when "mirror displays" is on?

Is there a quick way to change "Optimize for" setting when "mirror displays" is on?
I have two displays on my Mac Mini for totally different areas; I can't see the first monitor when I'm on the second. One is 1280x1024, one is 1920x1200. As I switch fairly often I'm wondering if there is a built-in or 3rd-party-utility way to quickly toggle the "optimize for" setting that is under "System Preferences" -> "Displays" -> "Display" tab -> "Optimize for:" dropdown box.
As Apple sadly doesn't make a all-in-one keyboard / mouse - need one as one of the monitors is used for just a very comfy chair, so keyboard is on my lap - I'm using an Lenovo ThinkPad USB Travel Keyboard, model SK-8855, and some key cobinations, esp. with function keys, seem not to work on it. So something from the desktop context menu or that allows you to set the hotkey would be preferable.
Thanks for any help,
-DJBC

I'm thinking that, Display Menu from the Mac App Store will help.

Fn on screen display message generator for ThinkPad has stopped working

Hi,
I did a clean install of Windows Vista Enterprise edition and have installed all the drivers for my T400.
What I found was that the Fn on screen display message generator was working fine right before I installed the driver for the Intel GM4500 video controller.
Once I installed this video driver, I get a popup window that says On screen display message generator for Thinkpad has stopped working
The problem details are as follows:
Problem signature:
Problem Event Name:   APPCRASH
Application Name:   TPOSDSVC.exe
Application Version:   1.1.5.0
Application Timestamp:   49ba1898
Fault Module Name:   MMDevApi.dll_unloaded
Fault Module Version:   0.0.0.0
Fault Module Timestamp:   4549bd03
Exception Code:   c0000005
Exception Offset:   749c19ad
OS Version:   6.0.6000.2.0.0.256.4
Locale ID:   1033
Additional Information 1:   d5a1
Additional Information 2:   c4214129afe40788e38f0b75c15ad165
Additional Information 3:   ed09
Additional Information 4:   309182ce310d7491a448199eccbd6ba1
I know that some of you have experienced this problem too but so far there hasn't been a solution that's worked.
I'm reluctant to install Vista SP1 or SP2 as that may caus other unrelated problems.
Thanks in advance for any advice you may have.

Dear All
Error message on start "on screen display message generator for thinkpad has stopped working"
Event Log "Faulting application TPOSDSVC.exe"
OS Vista Business 32
I have experienced this on a customer's ThinkPad R61e Machine Type 7650-DNG and found that the following solves the problem.
Firstly run Thinkvantage System Update and get everything up to date from Critical, Recommended and Optional Updates tabs.
Next Run Windows Update and view the available updates select all High Priority Microsoft updates and any optional ones that you require and (and this is where it differs from normal Lenovo advice) select the Conexant Audio driver aswell.
Current Vista version available on Windows Update is 4.98 (Date 23 Jun 2009)
Current Vista version available on Thinkvantage System Update is 4.18 (Date 2 Oct 2007)
NB Re-installing 4.18 may have solved the problem also, but I have not tried that and do not plan to.
I hope this helps.
Jason Bolton - BWCL - Lenovo Premium Business Partner - www.bwcl.co.uk

On screen display message generator for ThinkPad has stopped working

Hello,
This is a fresh install of Vista-32 on a lenovo x300.
Upon boot (or launching TPOSDSVC.exe) I receive the error message in the subject line.
There is an entry in the Application log, here is the jist of it:
Faulting application TPOSDSVC.exe, version 1.1.3.0 faulting module MMDevApi.dll_unloaded
I've uninstalled the On Screen Display application a few times - no luck
-I uninstalled it from add/remove programs then reinstalled it via the Lenovo System Update utility.
I've checked my video drivers - up to date according to lenovo
The problem is presitent under new profiles.
I did some digging online and found a possible fix of altering some reg keys
http://forums.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&message.id=28789&query.id=223...
The keys mentioned in that post were non- existent in this computers registry.... ?
I added them .... no dice
thanks in advance
-kirby
Solved!
Go to Solution.

Dear All
Error message on start "on screen display message generator for thinkpad has stopped working"
Event Log "Faulting application TPOSDSVC.exe"
OS Vista Business 32
I have experienced this on a customer's ThinkPad R61e Machine Type 7650-DNG and found that the following solves the problem.
Firstly run Thinkvantage System Update and get everything up to date from Critical, Recommended and Optional Updates tabs.
Next Run Windows Update and view the available updates select all High Priority Microsoft updates and any optional ones that you require and (and this is where it differs from normal Lenovo advice) select the Conexant Audio driver aswell.
Current Vista version available on Windows Update is 4.98 (Date 23 Jun 2009)
Current Vista version available on Thinkvantage System Update is 4.18 (Date 2 Oct 2007)
NB Re-installing 4.18 may have solved the problem also, but I have not tried that and do not plan to.
I hope this helps.
Jason Bolton - BWCL - Lenovo Premium Business Partner - www.bwcl.co.uk

I have a ipod u2 the screen displays an icon for the current conetar but does not start

I have a ipod u2 the screen displays an icon for the current conetar but does not start

Shockwave and Flash are not the same. Try installing a Flash plug-in. Here's the latest: Adobe Flash Player 11.2.202.183

HT202213 The screen displayed on the instructions for home sharing described as being found on the left side of iTunes isn't visible on the new iTunes page?? Where do i find that screen i.e., how do I fine the home sharing icon on the new iTunes page?

The screen displayed on the instructions for home sharing described as being found on the left side of iTunes isn't visible on the new iTunes page?? Where do i find that screen i.e., how do I fine the home sharing icon on the new iTunes page?

ontthe top menu
View > Show sidebar
Then the computers for home sharing show up under the Shared section

Multi-language display for the screens display

Hi,
we want to have the display in different languages for the text displayed on the control panel.
please confirm is it possible with the lookout so that we can change the language as per our choice for the displayed texts.

The only method I can suggest would to use a DataTable with the text of each label inside.
1 2 3 4 5
A English Stop Go On Off
B Spanish Alto Ir En Apagado
C German Halt Gehen Auf Ab
(Example, translations are probably not 100% )
Forshock - Consult.Develop.Solve.

Optimize for Screen Display

Similar Messages

Maybe you are looking for