Options in excise tab ( subcontracting Process)

HI,
Subcontracting business process
i am getting No excise duty, Create RG23D, and create RG23D for existing excise invoice options in Excise invoice tab at MIGO.
i have checked above settings in the system...but still the same error
please suggest
Regards,
Girish

Hi,
If you are making a process of Subcontracting , then you should be able to get Refer Subcontracting Challan in MIGO , for that in CIN--> Plant Setting you should REMOVE Tick from Depot against that plant also check that for the Excise Group if it is a subcontracting process Depot Setting should NOT be there.
If you put a tick against Depot in CIN --> Plant Setting and Depot Setting for the Excise Group, you will get RG23D tabs in MIGO
Regards,
Vikas

Similar Messages

Account entries with excise & without excise for Subcontracting process.

Please let me know the Account entries with excise & without excise for Subcontracting process.
Regards
PBR

hi..
check these links...
Accounting entries for subcontracting
and
Subcontracting process with excise duty??
It may help u..
Thanks

How to update excise in subcontracting process

hi all..
I have operation first which is executed in side but for second operation its send outside.
Once prod order is released for header material a PR is created automitcally for second operation .
Which later gets converted to PO (non material with text only).
Now how should my excise will get updated under rule 57F.

HI
As suggested you need to cancel the already created Excise Invoice in J1IIN then again create the excise invoice with reference to the billing document.
Ensure that the duties are flowing properly.
Regards
Prashanth

Excise treatment during subcontracting process with excise duty

Dear all,
Iam aware of the subcontracting process STEPS, but my query is while dealing with Excise in Subcontracting process, will the Excise duties captured in J1IS(create outgoing excise invoice) be RECONCILED with excise duties captured in J1IEX(subcontractor's excise invoice). As per my scenario both the duties are different unlike reconciliation process in the process without excise duty. My questions are
1.Do both excise duties during j1is and j1iex should be same or can it be different (since in j1is we capture Duties on raw material's assesable value where as in j1iex we capture duties semi finished goods given by sub contractor.)
2.Kindly eloborate treatment of excise duties captured in these steps.
Revert if you didnt understand this scenarion.
Regards,
Sravanthi.Y

Hi,
57fc challan will be issued when we send raw materials to subcontractors WITHOUT EXISE DUTY.Hence not relevant in my case. But my case is WITH excise duty.we send subcontractor the excise invoice by using j1is. later he will process these raw materials and will give back the semi finished goods along with excise invoice(which we will capture n post using j1iex). so my question will excise duties differ in j1is(excise invoice TO subcontractor) and in j1iex(excise duty FROM subcontractor)?

New requirement in Subcontracting process

Hi All,
There is a requirement related to indian excise, in Subcontracting process is it possible to merge below 2 steps 1)transfer posting to vendor stock and
2)creating subcontracting challan
That mean to say SC challan has to be created for some qty of material and transfer posting has to happen simultaneously for the same qty with 541 mov type.
This requirement may looks strange..!!
Do you think,it is possible in SAP..??by any means...
Pls confirm
Regds

Hi,
Normal pratice whenever you are sending material to sub contractor .Please count the material load inthe vehicle then raise document.
In you case instead of 10 nos document created and physically you have sent 5 nos only
You can do subsequent settlement
use t.code : MB04 enter the Purchase order no and enter the qty and save .
5 nos will be deducted from the vendor stock
I have tried just now. Please try
G.Ganesh Kumar

Excise Tab is not appear in the MIGO display --- Import Process

Hi Experts ,
Excise tab is not appear in the display of the material document in Import process.
Process flow.
1. Import Po.
2. Customs clearing (MIRO)
3. Capture excise invoice against the Import Po.(Reference to MIRO document )
4.MIGO with movement type 103, in excise tab i selected only refer the excise invoice , here excise ta is coming . Lot is also generated .
after posting the material document , excise tab is not appearing against the material document .
5. post excise against the excise invoice .
Please help.
Thanks
SAP MM
Edited by: Subbas on Aug 16, 2010 11:58 AM

Excise captured & posted using J1IEX using 2 step procedure won't appear in MIGO screen.
Display excise invoice using J1IEX(using vendor excise inv. no. or internal document no)
Only excise captured & posted in MIGO(Single step) will be appear in display of MIGO screeen.
Check SAP Note 952287 - CIN: Limited Functionalities in Country Version India -CIN -Q.no.5
5. Incoming Excise Invoice capture at Blocked stock 103 is not
supported in CIN.
The capture of incoming excise invoice is strictly advised to carryout at
unrestricted stock and not at blocked stock(103/105) due to architectural
issues. The capture at blocked stock may cause wrong excise posting.

EXCISE TAB IN MIGO FOR SUBCONTRACTING Challan

HI Gurus
In Subcontracting, I have created a sub contracting challan. At the time of MIGO, in Excise invoice tab page , I am entering the Challan no & year and then enter
After that i have saved the MAterial document
But when i m displaying material document i cant see the excise tab ??What can be the possible reaosn
Also i have checked the Chapter ID ,Vendor excise detail everything is maintained but still i am not able to see the excise tab
plz suggest
regards
shailesh

Dear Frienr
Can u plz let me know what is the note no an where i can find that note no
point will be duly awarded
regds
shailesh

SubContract Process with Excise Flow

Hello All,
Can anyone please explain me in Detail Subcontract Process with Excise flow considering these...
1. Subcontracting without payment of Excise duty
2. Subcontracting under full payment of Excise duty
and if scrap is to generate under process. So how to maintain that in PO. and Later how to reconcile that in Excise flow..
I will be very thankful if anyone help me ...
Abhinay....

hi,
SUBCONTRACTING:
To create Subcontracting challan:
J1IF01 - Creating sub contracting Chelan
J1IFQ - Reconciliation for Chelan
J1IF13 - after receiving all items
Subcontracting without Payment of Duty
Creation of Subcontracting PO (ME21N)
Transfer Posting of Components to Subcontractor (Mvmt Type - 541) (MB1B/ME2O/MIGO)
Creation of Subcontracting Challan w.r.t. Transfer Posting Doc (J1IF01)
Goods Receipt w.r.t. Subcontracting PO and Refer Subcontracting Challan at the time of GR (MIGO) {GR with 101 and auto consumption of components with 543 movement}
Reconciliation of Subcontracting Challan (J1IFQ)
Completion of Subcontracting Challan (J1IF13)
Generation of Annexure IV (J1IFR)
Note: - In this case, you have to maintain the Assessable Value for the Components to be supplied to Vendor in J1ID and also Excise Tax rates for the Chapter IDs linked with these components. So during J1IF01, system will take the Assessable Value as Excise base Value and calculates the Excise Duties by taking Excise Tax Rates.
Subcontracting under Full Payment of Duty
Creation of Subcontracting PO (ME21N)
Transfer Posting of Components to Subcontractor (MB1B/ME2O/MIGO)
Creation of Outgoing Excise Invoice w.r.t. Transfer Posting Document (J1IS) - Used to send the components to Subcontractor's. Here 57F4 Challan is not created.
Master Data
MM01- Material Masters for Components and FG
XK01 - Vendor Master (Subcontractor)
CS01 - BOM for FG
ME11 - Purchase Inforecord for Subcontracting
Regards
Priyanka.P

Interplant subcontracting process

Hi,
We have one business scenario , from Plant 1 we are sending the materials for heat treatment to plant 2.
In Plant 2 , they are doing the heat treatment process for the material which we have provided and they are send the material back to plant 1.
Please let me know the process which we need to adopt in SAP.
Regards
Suresh S

Hi,
we have already maintained the scenario,
1.We follow Subcontract process with the component maintained in both plants,
The subcon process help in maintaining the cost of the material and also the process is easy,
2.With STO PO send the component to the other plant and make GRN,After processed the component,
make STO PO and send with the same process,But it contains difficult to maintained the cost,
3.For the component,create routing,double click on Control key--scroll down--You will find external processing tab---maintain here net price and cost element account,this price will shown during the cost run for the components.
4.Do the 301 movement type for the component for the plant to plant transfer,if the cost of the cost of the material is updated,
Above is the standard options available,selection is Business policy,
Best Regards,
Devendra

Error while releasing Billing document in Subcontract process

Hi All,
We are working on Subcontract process as explained below:
Company code X purchases the component A and sends it to Company code Y on Subcontract. Company codes X and Y belongs to one company using single operative chart of Accounts, Controlling area & operating concern. FI configuration has been maintained in OBYA by treating above company codes Inter company GLs. The component A is sent to company code Y as non value added item. Through 501 movement type, as the component is sent by Company code X.
Company code Y will add some components (like B,C and charges some expenses as service component D for preparing Finished good) and send this FG to Company code X. For this company code Y will raise a Sales order and followed by MRP run and Production order is created.
In VA02 of above Sales Order, while entering Item details, where the Settlement rule is asking for PA Transfer structure (in Account assignment tab of Item details) and giving the following error analysis:
Enter a PA transfer structure
Message no. KD 044
Diagnosis
A PA transfer structure is required for settlement to profitability analysis.
System Response
You cannot save this settlement rule.
Procedure
Enter a PA transfer structure. To do this, choose the "Parameters" function in the settlement rule. As part of customizing, you can also store a default value for the PA analysis structure, in the settlement profile. The system then uses this default value when you enter a settlement rule.
In addition to above, another issue has raised while releasing the Billing document after doing PGI. Accounting document is not getting generated and while releasing the Billing document (VF02) it is throwing an error as
Enter profitability segment as cost object for Revenue and COGS posting
Message no. ZC 001.
MM,PP,SD & FICO configuration settings maintained:
1. All required OBYC settings
2. All cost element and Cost element categories have been maintained
3. From MM side the system is generating FI & CO documents
4. Settlement profile in Production Order type is maintained (in KOT2). Allocation structure and PA transfer structure were maintained in (OK06, OK07 & KEI1). In PA transfer structure we have assigned the required Sources and Value fields and settlement cost elements.
5. In VKOA condition types KOFI and KOFK were maintained for relevant Customer & Material Account Assignment groups.
6. Required settings have maintained in OKB9.
Movement types 501 (sub contract), Received back to Company code X through Movement type 101. In spite of these settings still we are getting the above mentioned errors.
Could any one help to provide some inputs on the above issue as early as possible.
Thanks in advance.

Hi,
check in the sales order line item procurement tab . u can get the requirement type. in SPRo check the requiremnt class for the requirement type. in that requirement clas u will get settrlemnt profile for the sales order. Check that settlemnt profile there u have to maintain the PA transfer structure.
I think both problem will get solved by maintaing the PA structure..
You are doing sales order costing right....and i hope it is non vsaluated sales order costing .....
If help ful please assign points.
cheers
Prabhat

Need to capture the excise for the excise tab missing item in GR

Hi Masters
Our users has done MIGO with one line item(for Material A) with excise item tab and other line item(fro MAterial B) without excise item tab(non availability of Chapter ID).
They are able to capture excise in J1IEX for the first item only with the help of GR document.
But they want to capture the excise for the second line item?
When we process the same GR document in J1IEX once again it shows error that documeny has been already processed.
How to resolve this?
Regards
Mohanraj.C

Hi,
If u have done only GR for Both materials then Cancel ur GR and Post it again.
And if you have Done J1iex for first material then Cancel GR first then Cancel Excise Invoice.
Now to cancel Excise Invoice follow the path as
From the SAP Easy Access screen, choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods Movement (MIGO).
In the top line:
Select Cancellation.
Select Material document.
Enter the number of the goods receipt that you want to cancel
Choose .
Flag all of the line items as OK.
Save the reversal document.
Reversing CENVAT Postings
From the SAP Easy Access screen, choose Indirect Taxes ® Procurement ® Excise Invoice ® Incoming Excise Invoices ® Individual Processing ® Change/Display/Post/Cancel.
In the top line:
Select Post CENVAT.
Select Vendor Excise Invoice.
Enter the excise invoice number.
Choose .
Choose Simulate CENVAT.
A dialog box appears, showing which postings the system will make to reverse the CENVAT.
To close the dialog box, choose .
Choose Post CENVAT.
Canceling Excise Invoices
From the SAP Easy Access screen, choose Indirect Taxes ® Procurement ® Excise Invoice ® Incoming Excise Invoices ® Individual Processing ® Change/Display/Post/Cancel.
In the top line:
Select Cancel.
Select Vendor Excise Invoice.
Enter the excise invoice number.
Choose .
Save the excise invoice
if Not solved then please specify that is error by system.
Regards,
Pardeep malik

STO - Excise tab not getting displayed in material document after posting.

Dear all,
We are facing an STO issue where in after we have done the receipt at the receiving plant with excise, the excise tab does not display in the GR material document.
It is plant to plant stock transfer with excise, the process that we are following as given below:
1) STO PO - ME21N
2) Outbound delivery - VL10B - Post PGI in VL02N
3) Outgoing excise invoice - J1IIN - With the key DLFC.
4) GR - MIGO with excise invoice capture.
During GR posting in MIGO screen the system does display the excise tab, we enter the outgoing excise number and the corresponding values appear in BED, ECS and HCES. We post the GR material document.
But after posting the material document if we display the same GR material document it does not show the excise invoice tab. And since we are not having part 1 entry number we are not able to post the part 2 entry in J1IEX.
Request to please do let us know if we have missed out on any configuration or master data.
Regards,
mahesh.

Hi,
Do the all customization setting for CIN for reference check the following link for India. and Material management
http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
You have to maintain Excise master data for material,vendor and PLant in J1ID .
reward if helpful,

Excise tab is not appearing in Import of STO material-MIGO display

Hi Guru's,
Excise tab is not appearing in Import of STO material-MIGO display.
Find the Process steps below.
1)Stock transfer order using NB document type-(Company codes are different)
2)VL10B
3)VL02N-PGI
4)Customs Invoice in Indian rupees.
5)Capture excise invoice-J1IEX(Capture excise invoice w.r.t PO not STO)
6)Goods receipt with Reference excise invoice(Excise tab appearing while posting goods) MIGO
7)Post Excise invoice--Accounting entries everything is correct.
After posting the MIGO when we display Material document in MIGO, excaise tab is not appearing for this scenario only.Rest of all Excise tab appearing.
Note:In J1IEX display of excise invoice in Reference document2 field Material document should be there but not showing its empty field.
Thanks,
VR
Edited by: get_vr on Feb 10, 2010 9:08 AM

Excise captured & posted using J1IEX using 2 step procedure won't appear in MIGO screen.
Display excise invoice using J1IEX(using vendor excise inv. no. or internal document no)
Only excise captured & posted in MIGO(Single step) will be appear in display of MIGO screeen.
Check SAP Note 952287 - CIN: Limited Functionalities in Country Version India -CIN -Q.no.5
5. Incoming Excise Invoice capture at Blocked stock 103 is not
supported in CIN.
The capture of incoming excise invoice is strictly advised to carryout at
unrestricted stock and not at blocked stock(103/105) due to architectural
issues. The capture at blocked stock may cause wrong excise posting.

Excise TAB is missing in MIGO

I had captured vendor excise invoice against PO in J1IEX
Later while doing GR, I had selected Refer excise invoice by drilldown.The excise value flows correctly which were captured before.
When i had posted GR & trying to see display of GR ,Excise tab is missing there.
It creates problem because while rejecting the material against that particular GR we don't understand while excise is captured against this or not...
What will be solution for it.
Process flow
J1IEX-Capture excise invoice against PO.& then MIGO
Regards,

Hi,
As per the process you have mentioned I understand that you have completed the Excise capture using J1IEX & Part 1 using MIGO where you have referred the captured excise invoice.
Now post the excise invoice using J1IEX & then check your Material document using MIGO transaction whether excise invoice getting displayed.
I hope this is the way we process an excise invoice in a 3 step method (Capture-Refer(Part 1)-Post).
Hope its clear.
Regards,

Maintain vendor for excise invoice -STO process??

Hi,
Still facing problem in Same issue so...
I am doing Stock transfer from plant to plant in same company code.
i have maintain all the information in the Excise TAB of migo but still face the following errors.
Error is "Maintain Vendor for the excise invoice. (Message No 4F185) ...????"
In STO process, vendor it won't come in the picture ??Becas , once we create purchase order with UB document type , it 'll ask for only supplying plant not for vendor .
So what might be the problem and how to locate it , trouble shoot the same .???
Thanks in advance
SAP-MM

hi
check following
goto Xk02
give ur vendor ( plant assigned to)
then goto PURCHASING TAB
here in menu EXTRAS>ADD URCHASING DATA
here u can find field for plant
just check and revert back
regards
kunal

Options in excise tab ( subcontracting Process)

Similar Messages

Maybe you are looking for