ORA-00210: cannot open the specified controlfile

Hi,
We are trying to run a package remotly and while executing the package . we are getting ORA-00210: cannot open the specified controlfile. I did crosscheck the controlfile through v$controlfile parameter and the ctlfile shows there. I did also go thorugh with metalink, it says you need to chech weather some process has locked it, or the max number of open file limit of OS. I would appriciate, if you can describe both of the above options.
OS Solaris
DB 9.2.0.8.0
hare krishna
Alok

Thanks Damorgan, I've verified it by checking the alert.log file and I also switch logfiles, it's working absolutly file. I am going to paste the comple error stack.
Connecting to the database CHRY_STAGE_STG.
ORA-00210: cannot open the specified controlfile
: controlfile: '/u700/oradata/pubint/control01.ctl'
ORA-27041: unable to open file
SVR4 Error: 24: Too many open files
Additional information: 3
ORA-06512: at "CHRY_STAGE_STG.DIFF_UTILS", line 1080
ORA-06512: at "CHRY_STAGE_STG.PKG_GROUP_IMG_CROSS_REFERENCE", line 199
ORA-06512: at line 6
Process exited.
Disconnecting from the database CHRY_STAGE_STG.
and when I verfied the diff_utils at line 1080 , I found the following.
EXECUTE IMMEDIATE 'INSERT /*+ APPEND */ INTO ' || p_HistoryTable ||
'( SELECT ' || p_column || ' FROM ' || p_MasterTable || ' A INNER JOIN ' ||
p_CurrentTable || ' B ON A.' || p_Keys || ' = B.' || p_Keys || ')';
hare krishna
Alok

Similar Messages

ORA-00210: cannot open the specified control file

Hi all,
Initially we faced the following error:
ORA-00214: control file '+DBDG/dws/controlfile/current.256.638648487' version
75647 inconsistent with file '+FLASHDG/dws/controlfile/current.256.638648489'
version 75645
Then the following action:
RMAN> restore controlfile from autobackup;
Starting restore at 05-DEC-07
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=997 devtype=DISK
recovery area destination: +flashdg
database name (or database unique name) used for search: DWS
channel ORA_DISK_1: autobackup found in the recovery area
channel ORA_DISK_1: autobackup found: +flashdg/DWS/AUTOBACKUP/2007_12_04/s_640476511.697.640476513
channel ORA_DISK_1: control file restore from autobackup complete
output filename=+DBDG/dws/controlfile/current.256.638648487
output filename=+FLASHDG/dws/controlfile/current.256.638648489
Finished restore at 05-DEC-07
RMAN> recover database;
Starting recover at 05-DEC-07
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 12/05/2007 15:16:10
ORA-00210: cannot open the specified control file
RMAN>
Any idea why this is happening?
Regards,
Soma Sekhar Karri

Something which you should have looked up prior to posting
00210, 00000, "cannot open the specified controlfile"
// *Cause: Cannot open the controlfile.
// *Action: Check to make sure the controlfile exists and is not locked by
// some other program.
Sybrand Bakker
Senior Oracle DBA

Mac Word 2008 - hyperlink message "Word cannot open the specified file"

I'm using WordMac 2008 version 12.2.5 and after following detailed instructions on how to hyperlink chapters in a Table of Contents to their respective chapters in a book, I can only get the message "Word cannot open the specified file".
Any ideas what could be wrong?
My OSX is 10.5.1.
The instructions I followed are pasted below and are copied from the Smashwords Style Guide: http://www.smashwords.com/books/view/52
START OF PASTE FROM SMASHWORDS STYLE GUIDE:
How to create a linked Table of Contents. Consider this feature in “beta.” My
thanks to Smashwords author Cheryl Anne Gardner for sharing these tips below,
which I have augmented based on my own experience adding a ToC to the Style
Guide (woo hoo!).
By adding a linked table of contents, you can help readers navigate your
document. This is especially useful for non-fiction. Most fiction doesn’t
need it. If you follow the instructions below, the ToC should work in your
EPUB, MOBI and PDF files, but it will not work in our other formats.
First, create your table of contents where you want it by typing it out. Make
sure the text is normalized just like the rest of your Smashwords’ Word
document. Example:
Contents
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Etc.
Next, we are going to create the BookMarks. In Word 2000, 2003 and 2007, the
Booksmark function is under the Insert tab. Go through your document, and at
each Chapter Start or Indexed item, you will highlight it and then select
Insert: bookmark. Name your bookmark corresponding to the Chapter/Indexed
item and then click add. It’s very important to use the first word of your
heading you’re linking to, because later on, when you add the hyperlinks,
Word displays the bookmark shortcuts in alphabetical order. With many
bookmarks, I found many of my bookmarks weren’t labeled properly, so it was
tough to link to the correct bookmark. If you want to link to a chapter named
How to Publish Ebooks, I’d recommend naming your bookmark
“HowToPublishEbooks” to make it easy to locate. If you instead name it,
“publishebooks,” you’ll frazzle your brain and make mistakes.
Repeat the process above for every Chapter Start as well as for other matter
in the book like index, bibliography, epilogue, prologue, etc. I didn’t link
to every section in the Style Guide, because otherwise the ToC would have
been three pages long. This is your call.
Next, return to your table of contents and highlight the word “Contents.”
Click insert, bookmark, and label this last bookmark “Contents”. Formatting
note: Bookmarks cannot have spaces or odd characters. If instead of
“Contents” you called the label in the document Table of Contents, as I did,
then when you insert the bookmark, name the bookmark “TableofContents,” one
word, or “toc.”
Next, add the hyperlinks to your Chapter Starts. In your table of contents,
if Chapter 1 is called Chapter 1, then highlight Chapter 1 and then click
insert Hyperlink. As you can see in the Style Guide, I tried to use more
descriptive labels. In Word’s Hyperlink menu on the left hand side, select
“Place in this document.” You will now see your bookmarks listed in the main
window. Select Chapter1 bookmark (or whatever you labeled it) and then click
ok. Do this procedure for every chapter and piece of matter in the table of
contents.
Final step. Now you can link back to the Table of contents. Move through your
document to each indexed item or Chapter start and highlight it. Then click
insert, hyperlink, and then select “Place in this document.” When the
bookmarks are showing in the main window, select the bookmark labeled
“Contents,” assuming that’s what you named your Table of Contents. Do this
for each and every chapter and or indexed item.
After you are done, all your links will be underlined. You will need to test
and make sure you linked everything properly. In most Word versions, you just
click on the hyperlink to test. In Word 2007, you may need to Ctrl-Click each
hyperlink and make sure it takes you where you need to go in the document.
Advice: Word has an automatic ToC generation feature under the reference tab.
Do not use this. It uses automated headings and formatting to generate the
ToC and this will un-normalize your text and cause font conversion issues in
your Smashwords files.
END OF PASTE FROM SMASHWORDS STYLE GUIDE.
I did all that as described but I still get the message "Word cannot open the specified file".
Could you help please?

This question would be better addressed to...
http://www.microsoft.com/mac/help.mspx
I think the operative phrase from that article is...
*Consider this feature in “beta.”*
-mj

Safari cannot open the specified address as OS X does not recognise the internet address starting with "aam". Please please can someone shed some light on this, its driving me MAD!!!

when i try to download the software onto my mac, i receive a message saying that safari cannot open the specified address as OS X does not recognise the internet address starting with "aam". Please please can someone shed some light on this, its driving me MAD!!!

Try and download the Desktop Application First before trying to install any other Adobe Product. The link for AAM is Safari looking for Desktop Application in your machine.
Creative Cloud Help | Creative Cloud for desktop

I can't open the creative cloud app installer, i'm getting an error message that says safari cannot open the specified address

i had previously installed it so i could use the 30 day trials, but i deleted i from my machine. now it won't open even though i purchased the creative cloud.

Mebridge please begin the installation process in a different web browser. You can also download the Creative Cloud Desktop application from Creative Cloud Help | Creative Cloud for desktop.

Safari cannot open the page because the first character is invalid, how can I fix?

I cannot open PDF's. Error message appears saying, Safari cannot open the specified webpage because the first character is unrecognizable". What do I need to do to fix it?

Hi..
Go to /Library/Internet Plug-Ins
Move the Adobe PDF browser plugin (or PDF browser plugin) to the Trash.
Quit then relaunch Safari.

Working in Windows 8.1, trying to open Lightroom 3.6 64 bit, get the error message: Windows cannot access the specified device, path or file. You may no have th appropriate permissions to access the item.

Working in Windows 8.1, trying to open Lightroom 3.6 64 bit, get the error message: Windows cannot access the specified device, path or file. You may no have th appropriate permissions to access the item. I have changed the permissions to everyone and it doesn't work

Any suggestions please?

When I try to open iTunes, I get this error message: Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item. I get a different error message if I try to uninstall it.

When I try to open iTunes, I get this error message: "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." I've been able to uninstall all Apple products except iTunes as I get this error message: "The Installer has insufficent privileges to modify this file: C:\Program Files\i Tunes\Acknowledgments.rtf." I've had the iTunes on my laptop for a year and a half with no problems until now.

Any suggestions please?

Consistently does not open, gives the error: "C:\Program Files (x86)\Mozilla\firefox.exe Windows cannot access the specified device, path, or file. You may no

Installed FF 16, 17, 18. Will not open in normal administrator login, nor with "Run as administrator" but will in W7 safe mode. Changed permissions (had to do it in W7 Safe Mode, normal login would not allow (logged in as an administrator) could not delete the Mozilla files in normal login. On rare occasions, with a new install, I could get it to open once, then not again. Searched the reg for any mention of Mozilla or FF and cleaned it. Tried FF safe mode, no luck. Checked permissions after taking ownership and propagating full ownership rights to all FF files, many reboots, no luck. Chrome, IE and SeaMonkey work fine. Using a fairly new install of W7 Professional 64 bit, on a Dell Optiplex 990 i7, 16GB ram. Had the same problem with another user on an identical box. No problem on other computers No other program problems.

I should have been a bit more definitive.
I have uninstalled FF, with the windows uninstaller, by manually cleaning the files and the registry of any mention of FF or Mozilla, and by running Revo uninstaller - always rebooting and checking to see if the files are indeed gone. (I have set windows file preferences to see all files, including system files.) I have run 4 AV/malware scanners and found nothing but a few tracking cookies. I download, from Mozilla.org, (http://download.cdn.mozilla.net/pub/mozilla.org/firefox/releases/18.0/win32/en-US/Firefox%20Setup%2018.0.exe) a fresh copy of the Firefox Setup 18.0.exe each time and install when logged in as an administrator and choose "Run as Administrator". I get the same result each time I try to open Firefox. Consistently does not open, gives the error: "C:\Program Files (x86)\Mozilla\firefox.exe Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." This happens even when I run the .exe file from the x86 program directory. I have also attempted to run in XPsp3 compatibility mode to no avail,
I make the following assumptions:
The system is not infected
I am doing clean installs
There is no existing trace of FF on the system
I get identical results on one other W7 64 bit Optiplex 990 system with an i7 processor and 16 GB or ram.
I CAN run in windows safe mode with networking.
I have no other software or hardware issues.

The system cannot open the device or file specified

I am trying to install jsdk.142 but i get an error message that says "The system cannot open the device or file specified" Any suggestions on how to get past this?

I figured it out myself. The temp folder that the program was using was encrypted. I removed the encryption and it installed fine.

Windows cannot access the specified device, path, or file when opening safari

I am on a HP Probook 4520s and when I try to run the Safari executable I get the error message:
"Windows cannot access the specified device, path, or file. You may not have the appropriate permission to access the item."
I have full control to the C:\Program Files (x86)\Safari folder
Could someone please help?

Hey All
I have actually managed to find out what it is so thanks for any suggestions up to now.
At work, we use McAfee AntiVirus. Part of this is McAfee SiteAdvisor 3.5 for Internet Security.
In Policy Catalog in the McAfee ePO system under SiteAdvisor, there is Hardening setting. What this does is block any unauthorised browser from being able to run. Safari, along with the likes of Opera and some others are automatically blocked by this. Once you uncheck, to allow users to run Safari, it works fine.
Here's where I found the answer:
https://kc.mcafee.com/corporate/index?page=content&id=KB73943&actp=LIST

ORA-00308: cannot open archived log, ORA-27041

hi All,
here I am making DR server and I copied SAP Data file1,2,3,4 from PRD to DR server and created control file. when I try to run following command for applied archives which i copy from PRD then getting below error.
SQL>Startup
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> recover database using backup controlfile;
ORA-00279: change 1209554452 generated at 02/09/2012 17:02:57 needed for thre
1
ORA-00289: suggestion : F:\ORACLE\PRD\ORAARCH\PRDARCH1_59501_657865393.DBF
ORA-00280: change 1209554452 for thread 1 is in sequence #59501
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
auto
ORA-00308: cannot open archived log
'F:\ORACLE\PRD\ORAARCH\PRDARCH1_59501_657865393.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-00308: cannot open archived log
'F:\ORACLE\PRD\ORAARCH\PRDARCH1_59501_657865393.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
here required PRDARCH1_59501_657865393.DBF while PRD server have PRDARCHARC59501_0657865393.001
I did change the LOG_ARCHIVE_DEST parameter in initSID.ora of DR server and not in PRD.
please tell that, how can i apply PRD's archive (.001 extension) on DR.
Regards,

hi all,
after recommendation , now parameter values on DR server is :
*.log_archive_dest_1='LOCATION=F:\oracle\PRD\oraarch\PRDarch'
*.log_archive_format='%t_%s_%r.001'
when i try to apply
SQL> recover database using backup controlfile;
ORA-00279: change 1211443555 generated at 02/10/2012 23:36:05 needed for thread
1
ORA-00289: suggestion : F:\ORACLE\PRD\ORAARCH\PRDARCH\1_59557_657865393.001
ORA-00280: change 1211443555 for thread 1 is in sequence #59557
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
auto
ORA-00308: cannot open archived log
'F:\ORACLE\PRD\ORAARCH\PRDARCH\1_59557_657865393.001'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
if you see that the required archive is: 1_59557_657865393.001
while copied archive exist with this name: PRDARCHARC59557_0657865393.001
I tried to change in Format parameter to make required format but
Exp:
%t_%s_%r.001
1_59557_657865393.001
ARC%s%r%t.001
ARC595576578653931.001'
ARC%s_%r%t.001
ARC59557_6578653931.001
ARC%s_%r.%t
ARC59557_657865393.1
PRDARCHARC%s_%r.%t
PRDARCHARC59557_657865393.1
Required Format: PRDARCHARC59540_0657865393.001
how can i resolve this different name issue? please suggest me required format.
Regards,

ORA-01610: recovery using the BACKUP CONTROLFILE option must be done

Hello All,
I have an instance on my LAB server. To explore more avenues in cloning a DB I did the following.
1. On my Oracle 10g Instance I fired an large query which would take atleast an hour to execute.
2. Opened another session and executed shu ABORT to shutdown the above instance abruptly.
3. Took backup of datafiles, archive logs and redologs [ prior to shu abort, I had issued ALTER DATABASE BACKUP CONTROLFILE TO TRACE]
Restoration steps:
NOMOUNT with pfile edited to hold the name of the new DB_NAME
Create control file script edited to reflect the new paths of datafile and redologs.
MOunted succesfully.
ALTER DATABASE OPEN RESETLOGS;
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1:
'F:\ORACLE\COLD_BACKUP_TRIAL\SET2\DATAFILE\DUPLISYSTEM_553LC8QX_.DBF'
SQL> recover datafile 'F:\ORACLE\COLD_BACKUP_TRIAL\SET2\DATAFILE\DUPLISYSTEM_553LC8QX_.DBF';
ORA-00283: recovery session canceled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
SQL> recover database using backup controlfile;
ORA-00279: change 2962256 generated at 09/03/2009 12:06:49 needed for thread 1
ORA-00289: suggestion :
F:\ORACLE\COLD_BACKUP_TRIAL\SET2\FLASH_RECOVERY_AREA\DUPLI\ARCHIVELOG\2009_09_23
\O1_MF_1_2_%U_.ARC
ORA-00280: change 2962256 for thread 1 is in sequence #2
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
F:\oracle\cold_backup_trial\SET2\ONLINELOG_BK\O1_MF_3_553LGCH3_.log
ORA-00342: archived log does not have expected resetlogs SCN 2933995
ORA-00334: archived log:
'F:\ORACLE\COLD_BACKUP_TRIAL\SET2\ONLINELOG_BK\O1_MF_3_553LGCH3_.LOG'
I didn't find the file it was suggesting so I tried many combinations of providing the right recovery file name :-- All the latest Archive logs and Redologs in my backup.
Still the recovery is not successful. Please let me know how can I recover my DATABASE.
Many thanks in advance.
Regards,
Valli

Greetings,
If I understood, you basically have a copy of a primary database and the redo log archives of this pretty same database, you have backed up the control file of this primary database, edited it pointing all paths of your datafiles to the new location but renaming the instance name.
I am assuming that you have edited the first line of your control file to something like "CREATE CONTROLFILE SET DATABASE "DB02" RESETLOGS ARCHIVELOG", in this case are you sure that the redolog archives have not loose the sequence? In this case it will ask more and more archives and it will never end, take a look at the date and time of the thread that your instance is asking for recovery. Is your instance a production database? If it is NOT production and you are SURE that the database is completely recovered and is asking for redolog files that does not even exist you can try to add the ALLOWRESETLOGS_CORRUPTION=TRUE to your init.ora and open the db... This solution is not recommended and you should never use it on production instances... take this hint as a LAST effort to bring your db online.
Regards,
Bruno Carvalho

ORA-00308: cannot open archived log '+DATA'

Hello all,
I created new physical standby but I facing problem with shipping archived file between primary and standby.
Primary : RAC (4 nodes)
Standby : single node with ASM
when I run :
alter database recover managed standby database disconnect from session;
in alert log file :
Managed Standby Recovery not using Real Time Apply
Parallel Media Recovery started with 24 slaves
Waiting for all non-current ORLs to be archived...
All non-current ORLs have been archived.
Media Recovery Waiting for thread 1 sequence 25738
Tue Mar 03 12:21:13 2015
Completed: alter database recover managed standby database disconnect from session
and when i checked archived files by
select max(sequence#) from v$archivanded_log;
It was null.
I understand thatno shipping between primary and standby till this point i deiced to use manual recovery by :
alter database recover automatic standby database;
But i get this error in alert log file :
alter database recover automatic standby database
Media Recovery Start
started logmerger process
Tue Mar 03 12:38:38 2015
Managed Standby Recovery not using Real Time Apply
Parallel Media Recovery started with 24 slaves
Media Recovery Log +DATA
Errors with log +DATA
Errors in file /u01/app/oracle/diag/rdbms/oracledrs/oracledrs/trace/oracledrs_pr00_4989.trc:
ORA-00308: cannot open archived log '+DATA'
ORA-17503: ksfdopn:2 Failed to open file +DATA
ORA-15045: ASM file name '+DATA' is not in reference form
ORA-279 signalled during: alter database recover automatic standby database..
when i opened oracledrs_pr00_4989.trc: file i find :
*** 2015-03-03 12:38:39.478
Media Recovery add redo thread 4
ORA-00308: cannot open archived log '+DATA'
ORA-17503: ksfdopn:2 Failed to open file +DATA
ORA-15045: ASM file name '+DATA' is not in reference form
When I created i set these parameter in duplicate command:
set db_file_name_convert='+ASM_ORADATA/oracle','+DATA/oracledrs'
set log_file_name_convert='+ASM_ARCHIVE/oracle','+DATA/oracledrs','+ASM_ORADATA/oracle','+DATA/oracledrs'
set control_files='+DATA'
set db_create_file_dest='+DATA'
set db_recovery_file_dest='+DATA'
What please the mistake here
Thanks in advance,

Yes I have datafiles under +DATA
ASMCMD> cd +DATA/ORACLEDRS/DATAFILE
ASMCMD> ls
ASD.282.873258045
CATALOG.288.873258217
DEVTS.283.873258091
EXAMPLE.281.873258043
FEED.260.873227069
FEED.279.873257713
INDX.272.873251345
INDX.273.873252239
INDX.278.873257337
SYSAUX.262.873227071
SYSTEM.277.873256531
SYSTEM_2.280.873257849
TB_WEBSITE.284.873258135
TB_WEBSITE.285.873258135
TB_WEBSITE.286.873258181
TB_WEBSITE.287.873258183
UNDOTBS1.275.873253421
UNDOTBS2.276.873255247
UNDOTBS3.261.873227069
UNDOTBS4.271.873245967
USERS.263.873227071
USERS.264.873235507
USERS.265.873235893
USERS.266.873237079
USERS.267.873238225
USERS.268.873243661
USERS.269.873244307
USERS.270.873244931
USERS.274.873252585
asd01.dbf
catalog01
dev01.dbf
example.dbf
feed01.dbf
feed02.dbf
indx01.dbf
indx02.dbf
indx03.dbf
sysaux01.dbf
system01.dbf
system02.dbf
undotbs01.dbf
undotbs02.dbf
undotbs03.dbf
undotbs04.dbf
user1.dbf
users01.dbf
users02.dbf
users03.dbf
users04.dbf
users05.dbf
users06.dbf
users07.dbf
users08.dbf
website01.dbf
website02.dbf
website03.dbf
website04.dbf
ASMCMD>
Standby :
[root@oracledrs ~]# id oracle
uid=54321(oracle) gid=54321(oinstall) groups=54321(oinstall),54322(dba)
Primary :
[root@dbn-prod-1 disks]# id oracle
uid=54321(oracle) gid=54321(oinstall) groups=54321(oinstall),54322(dba)
1- yes i have needed archived files at my primary
2- select inst_id,thread#,group# from gv$log;
Primary :
INST_ID,THREAD#,GROUP#
1,1,1
1,1,2
1,2,3
1,2,4
1,3,5
1,3,6
1,4,7
1,4,8
1,1,9
1,2,10
1,3,11
1,4,12
3,1,1
3,1,2
3,2,3
3,2,4
3,3,5
3,3,6
3,4,7
3,4,8
3,1,9
3,2,10
3,3,11
3,4,12
2,1,1
2,1,2
2,2,3
2,2,4
2,3,5
2,3,6
2,4,7
2,4,8
2,1,9
2,2,10
2,3,11
2,4,12
4,1,1
4,1,2
4,2,3
4,2,4
4,3,5
4,3,6
4,4,7
4,4,8
4,1,9
4,2,10
4,3,11
4,4,12
Standby :
INST_ID,THREAD#,GROUP#
1,1,9
1,1,2
1,1,1
1,2,3
1,2,4
1,2,10
1,3,5
1,3,6
1,3,11
1,4,12
1,4,7
1,4,8
3- That's sample from alert log since i started the standby (for standby and primary)
Standby :
alter database mount standby database
NOTE: Loaded library: /opt/oracle/extapi/64/asm/orcl/1/libasm.so
NOTE: Loaded library: System
SUCCESS: diskgroup DATA was mounted
ERROR: failed to establish dependency between database oracledrs and diskgroup resource ora.DATA.dg
ARCH: STARTING ARCH PROCESSES
Tue Mar 03 18:38:16 2015
ARC0 started with pid=128, OS id=4461
ARC0: Archival started
ARCH: STARTING ARCH PROCESSES COMPLETE
ARC0: STARTING ARCH PROCESSES
Tue Mar 03 18:38:17 2015
Successful mount of redo thread 1, with mount id 1746490068
Physical Standby Database mounted.
Lost write protection disabled
Tue Mar 03 18:38:17 2015
ARC1 started with pid=129, OS id=4464
Tue Mar 03 18:38:17 2015
ARC2 started with pid=130, OS id=4466
Tue Mar 03 18:38:17 2015
ARC3 started with pid=131, OS id=4468
Tue Mar 03 18:38:17 2015
ARC4 started with pid=132, OS id=4470
Tue Mar 03 18:38:17 2015
ARC5 started with pid=133, OS id=4472
Tue Mar 03 18:38:17 2015
ARC6 started with pid=134, OS id=4474
Tue Mar 03 18:38:17 2015
ARC7 started with pid=135, OS id=4476
Completed: alter database mount standby database
Tue Mar 03 18:38:17 2015
ARC8 started with pid=136, OS id=4478
Tue Mar 03 18:38:17 2015
ARC9 started with pid=137, OS id=4480
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC8: Becoming the 'no FAL' ARCH
ARC2: Becoming the heartbeat ARCH
ARC2: Becoming the active heartbeat ARCH
Tue Mar 03 18:38:18 2015
Starting Data Guard Broker (DMON)
ARC9: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
Tue Mar 03 18:38:23 2015
INSV started with pid=141, OS id=4494
Tue Mar 03 18:39:11 2015
alter database recover managed standby database disconnect from session
Attempt to start background Managed Standby Recovery process (oracledrs)
Tue Mar 03 18:39:11 2015
MRP0 started with pid=142, OS id=4498
MRP0: Background Managed Standby Recovery process started (oracledrs)
started logmerger process
Tue Mar 03 18:39:16 2015
Managed Standby Recovery not using Real Time Apply
Parallel Media Recovery started with 24 slaves
Waiting for all non-current ORLs to be archived...
All non-current ORLs have been archived.
Media Recovery Waiting for thread 1 sequence 25738
Completed: alter database recover managed standby database disconnect from session
Tue Mar 03 18:41:17 2015
WARN: ARCH: Terminating pid 4476 hung on an I/O operation
Killing 1 processes with pids 4476 (Process by index) in order to remove hung processes. Requested by OS process 4224
ARCH: Detected ARCH process failure
Tue Mar 03 18:45:17 2015
ARC2: STARTING ARCH PROCESSES
Tue Mar 03 18:45:17 2015
ARC7 started with pid=127, OS id=4586
Tue Mar 03 18:45:18 2015
Fatal NI connect error 12170.
VERSION INFORMATION:
        TNS for Linux: Version 11.2.0.4.0 - Production
        Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.4.0 - Production
        TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.4.0 - Production
Time: 03-MAR-2015 18:45:18
Tracing not turned on.
Tns error struct:
    ns main err code: 12535
TNS-12535: TNS:operation timed out
    ns secondary err code: 12560
    nt main err code: 505
TNS-00505: Operation timed out
    nt secondary err code: 0
    nt OS err code: 0
Client address: <unknown>
ARC7: Archival started
ARC2: STARTING ARCH PROCESSES COMPLETE
Tue Mar 03 18:47:14 2015
alter database recover managed standby database cancel
Tue Mar 03 18:48:18 2015
Fatal NI connect error 12170.
VERSION INFORMATION:
        TNS for Linux: Version 11.2.0.4.0 - Production
        Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.4.0 - Production
        TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.4.0 - Production
Time: 03-MAR-2015 18:48:18
Tracing not turned on.
Tns error struct:
    ns main err code: 12535
TNS-12535: TNS:operation timed out
    ns secondary err code: 12560
    nt main err code: 505
TNS-00505: Operation timed out
    nt secondary err code: 0
    nt OS err code: 0
Client address: <unknown>
Tue Mar 03 18:51:18 2015
Fatal NI connect error 12170.
VERSION INFORMATION:
        TNS for Linux: Version 11.2.0.4.0 - Production
        Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.4.0 - Production
        TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.4.0 - Production
Time: 03-MAR-2015 18:51:18
Tracing not turned on.
Tns error struct:
    ns main err code: 12535
TNS-12535: TNS:operation timed out
    ns secondary err code: 12560
    nt main err code: 505
TNS-00505: Operation timed out
    nt secondary err code: 0
    nt OS err code: 0
Client address: <unknown>
Error 12170 received logging on to the standby
FAL[client, USER]: Error 12170 connecting to oracle for fetching gap sequence
MRP0: Background Media Recovery cancelled with status 16037
Errors in file /u01/app/oracle/diag/rdbms/oracledrs/oracledrs/trace/oracledrs_pr00_4500.trc:
ORA-16037: user requested cancel of managed recovery operation
Recovery interrupted!
Tue Mar 03 18:51:18 2015
MRP0: Background Media Recovery process shutdown (oracledrs)
Tue Mar 03 18:51:19 2015
Managed Standby Recovery Canceled (oracledrs)
Completed: alter database recover managed standby database cancel
Tue Mar 03 18:51:56 2015
alter database recover automatic standby database
Media Recovery Start
started logmerger process
Tue Mar 03 18:51:56 2015
Managed Standby Recovery not using Real Time Apply
Parallel Media Recovery started with 24 slaves
Media Recovery Log +DATA
Errors with log +DATA
Errors in file /u01/app/oracle/diag/rdbms/oracledrs/oracledrs/trace/oracledrs_pr00_4617.trc:
ORA-00308: cannot open archived log '+DATA'
ORA-17503: ksfdopn:2 Failed to open file +DATA
ORA-15045: ASM file name '+DATA' is not in reference form
ORA-279 signalled during: alter database recover automatic standby database...
Tue Mar 03 18:53:06 2015
db_recovery_file_dest_size of 512000 MB is 0.13% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Primary :
Tue Mar 03 17:13:43 2015
Thread 1 advanced to log sequence 26005 (LGWR switch)
Current log# 1 seq# 26005 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_1.271.849356883
Tue Mar 03 17:13:44 2015
Archived Log entry 87387 added for thread 1 sequence 26004 ID 0x66aa5a0d dest 1:
Tue Mar 03 18:00:18 2015
Thread 1 advanced to log sequence 26006 (LGWR switch)
Current log# 2 seq# 26006 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_2.270.849356883
Tue Mar 03 18:00:18 2015
Archived Log entry 87392 added for thread 1 sequence 26005 ID 0x66aa5a0d dest 1:
Tue Mar 03 18:55:33 2015
Thread 1 advanced to log sequence 26007 (LGWR switch)
Current log# 9 seq# 26007 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_9.295.853755983
Current log# 9 seq# 26007 mem# 1: +ASM_ARCHIVE/oracle/onlinelog/group_9.10902.853755985
Tue Mar 03 18:55:33 2015
Archived Log entry 87395 added for thread 1 sequence 26006 ID 0x66aa5a0d dest 1:
Tue Mar 03 19:14:22 2015
Dumping diagnostic data in directory=[cdmp_20150303191422], requested by (instance=4, osid=10234), summary=[incident=1692472].
Dumping diagnostic data in directory=[cdmp_20150303191425], requested by (instance=4, osid=10234), summary=[incident=1692473].
Tue Mar 03 20:00:06 2015
Thread 1 advanced to log sequence 26008 (LGWR switch)
Current log# 1 seq# 26008 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_1.271.849356883
Tue Mar 03 20:00:07 2015
Archived Log entry 87401 added for thread 1 sequence 26007 ID 0x66aa5a0d dest 1:
Tue Mar 03 21:00:02 2015
Thread 1 advanced to log sequence 26009 (LGWR switch)
Current log# 2 seq# 26009 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_2.270.849356883
Tue Mar 03 21:00:03 2015
Archived Log entry 87403 added for thread 1 sequence 26008 ID 0x66aa5a0d dest 1:
Thread 1 advanced to log sequence 26010 (LGWR switch)
Current log# 9 seq# 26010 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_9.295.853755983
Current log# 9 seq# 26010 mem# 1: +ASM_ARCHIVE/oracle/onlinelog/group_9.10902.853755985
Tue Mar 03 21:00:06 2015
Archived Log entry 87404 added for thread 1 sequence 26009 ID 0x66aa5a0d dest 1:
Tue Mar 03 22:00:00 2015
Setting Resource Manager plan SCHEDULER[0x32DA]:DEFAULT_MAINTENANCE_PLAN via scheduler window
Setting Resource Manager plan DEFAULT_MAINTENANCE_PLAN via parameter
Tue Mar 03 22:00:00 2015
Starting background process VKRM
Tue Mar 03 22:00:00 2015
VKRM started with pid=184, OS id=4838
Tue Mar 03 22:00:07 2015
Begin automatic SQL Tuning Advisor run for special tuning task "SYS_AUTO_SQL_TUNING_TASK"
Tue Mar 03 22:00:25 2015
Thread 1 advanced to log sequence 26011 (LGWR switch)
Current log# 1 seq# 26011 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_1.271.849356883
Tue Mar 03 22:00:26 2015
Archived Log entry 87408 added for thread 1 sequence 26010 ID 0x66aa5a0d dest 1:
Tue Mar 03 22:00:58 2015
Thread 1 advanced to log sequence 26012 (LGWR switch)
Current log# 2 seq# 26012 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_2.270.849356883
Tue Mar 03 22:01:00 2015
Archived Log entry 87412 added for thread 1 sequence 26011 ID 0x66aa5a0d dest 1:
Tue Mar 03 22:02:37 2015
Thread 1 cannot allocate new log, sequence 26013
Checkpoint not complete
Current log# 2 seq# 26012 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_2.270.849356883
Thread 1 advanced to log sequence 26013 (LGWR switch)
Current log# 9 seq# 26013 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_9.295.853755983
Current log# 9 seq# 26013 mem# 1: +ASM_ARCHIVE/oracle/onlinelog/group_9.10902.853755985
Tue Mar 03 22:02:41 2015
Archived Log entry 87415 added for thread 1 sequence 26012 ID 0x66aa5a0d dest 1:
Tue Mar 03 22:03:26 2015
Thread 1 cannot allocate new log, sequence 26014
Checkpoint not complete
Current log# 9 seq# 26013 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_9.295.853755983
Current log# 9 seq# 26013 mem# 1: +ASM_ARCHIVE/oracle/onlinelog/group_9.10902.853755985
Thread 1 advanced to log sequence 26014 (LGWR switch)
Current log# 1 seq# 26014 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_1.271.849356883
Tue Mar 03 22:03:29 2015
Archived Log entry 87416 added for thread 1 sequence 26013 ID 0x66aa5a0d dest 1:
Tue Mar 03 22:05:50 2015
Thread 1 cannot allocate new log, sequence 26015
Checkpoint not complete
Current log# 1 seq# 26014 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_1.271.849356883
Tue Mar 03 22:05:52 2015
End automatic SQL Tuning Advisor run for special tuning task "SYS_AUTO_SQL_TUNING_TASK"
Thread 1 advanced to log sequence 26015 (LGWR switch)
Current log# 2 seq# 26015 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_2.270.849356883
Tue Mar 03 22:05:54 2015
Archived Log entry 87418 added for thread 1 sequence 26014 ID 0x66aa5a0d dest 1:
Tue Mar 03 22:07:29 2015
Thread 1 cannot allocate new log, sequence 26016
Checkpoint not complete
Current log# 2 seq# 26015 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_2.270.849356883
Thread 1 advanced to log sequence 26016 (LGWR switch)
Current log# 9 seq# 26016 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_9.295.853755983
Current log# 9 seq# 26016 mem# 1: +ASM_ARCHIVE/oracle/onlinelog/group_9.10902.853755985
Tue Mar 03 22:07:33 2015
Archived Log entry 87421 added for thread 1 sequence 26015 ID 0x66aa5a0d dest 1:
Thread 1 cannot allocate new log, sequence 26017
Checkpoint not complete
Current log# 9 seq# 26016 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_9.295.853755983
Current log# 9 seq# 26016 mem# 1: +ASM_ARCHIVE/oracle/onlinelog/group_9.10902.853755985
Thread 1 advanced to log sequence 26017 (LGWR switch)
Current log# 1 seq# 26017 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_1.271.849356883
Tue Mar 03 22:07:39 2015
Archived Log entry 87422 added for thread 1 sequence 26016 ID 0x66aa5a0d dest 1:
Tue Mar 03 22:16:36 2015
Thread 1 advanced to log sequence 26018 (LGWR switch)
Current log# 2 seq# 26018 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_2.270.849356883
Tue Mar 03 22:16:37 2015
Archived Log entry 87424 added for thread 1 sequence 26017 ID 0x66aa5a0d dest 1:
Tue Mar 03 22:30:06 2015
Thread 1 advanced to log sequence 26019 (LGWR switch)
Current log# 9 seq# 26019 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_9.295.853755983
Current log# 9 seq# 26019 mem# 1: +ASM_ARCHIVE/oracle/onlinelog/group_9.10902.853755985
Tue Mar 03 22:30:07 2015
Archived Log entry 87427 added for thread 1 sequence 26018 ID 0x66aa5a0d dest 1:
Tue Mar 03 22:30:18 2015
Thread 1 advanced to log sequence 26020 (LGWR switch)
Current log# 1 seq# 26020 mem# 0: +ASM_ORADATA/oracle/onlinelog/group_1.271.849356883
Tue Mar 03 22:30:19 2015
Archived Log entry 87428 added for thread 1 sequence 26019 ID 0x66aa5a0d dest 1:
Tue Mar 03 23:07:27 2015
Dumping diagnostic data in directory=[cdmp_20150303230727], requested by (instance=4, osid=25140), summary=[incident=1692496].
Dumping diagnostic data in directory=[cdmp_20150303230730], requested by (instance=4, osid=25140), summary=[incident=1692497].
Thanks in advance sir ,

Cannot open the file because the open options are incorrect

I'm trying to iterate through a folder of images, open each one of them, duplicate them into another photoshop file and close the individual image. This code works great on a PC (Photoshop CS3), but when I run it on our macs (Photoshop CS3) I will receive the following error on random images. "Error: Cannot open the file because the open options are incorrect" Does anyone know how to solve this problem? I've read about possibly setting the OpenDocumentType but have not seen an example anywhere. This error will sometimes occur after loading in one image or sometimes after 20 images. Sometimes I run it on the same directory multiple times all with various points of error. Sometimes every images is loaded. Any help would be much appreciated. Sample code is below.
i //CODE BELOW
i //allows the user to select an folder full of images
b var inputFolder = Folder.selectDialog("Select a folder that contains the files you want added as layers.");
b var fileList = inputFolder.getFiles();
b var tempRef = app.open(tempName);
b for (var i = 0; i < fileList.length; i++)
b {
b var tempName = fileList[i];
b var tempStringName = fileList[i].toString();
i //used to check if the file in the directory does in fact contain the .png extension
b var reducedFileName = tempStringName.substring(tempStringName.lastIndexOf("/")+1);
b if(reducedFileName.substring((reducedFileName.length - 4),(reducedFileName.length)) != ".png" || reducedFileName.substring((reducedFileName.length - 4),(reducedFileName.length)) != ".PNG")
b {
i //setting reference to opened docuement PNG file
i //This seems to be the section throwing the error. Surrounding with Try Catch revealse the Error noted above
b var tempRef = app.open(tempName);
i //setting a tempName variable to the PNG file name
b var tempName = app.activeDocument.name;
i //setting reference to the active layer in the file
b var graphicLayer = app.activeDocument.activeLayer;
i //setting the PNG layer name to the PNG file
b tempRef.layers[0].name = tempName;
i //duplicating the image onto the opened Photoshop file
b tempRef.layers[0].duplicate(backRef);
i //closing the original PNG file without saving
b tempRef.close(SaveOptions.DONOTSAVECHANGES);
b }
b }

It looks as if the folder contains non Photoshop files, one way around the problem would be to change
var fileList = inputFolder.getFiles();
To specify the file types you want to process IE:
var fileList = inputFolder.getFiles(/\.(jpg|tif|psd|crw|cr2|nef|dcr|dc2|raw)$/i);

ORA-00210: cannot open the specified controlfile

Similar Messages

Maybe you are looking for