ORA-00210: cannot open the specified control file

Hi all,
Initially we faced the following error:
ORA-00214: control file '+DBDG/dws/controlfile/current.256.638648487' version
75647 inconsistent with file '+FLASHDG/dws/controlfile/current.256.638648489'
version 75645
Then the following action:
RMAN> restore controlfile from autobackup;
Starting restore at 05-DEC-07
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=997 devtype=DISK
recovery area destination: +flashdg
database name (or database unique name) used for search: DWS
channel ORA_DISK_1: autobackup found in the recovery area
channel ORA_DISK_1: autobackup found: +flashdg/DWS/AUTOBACKUP/2007_12_04/s_640476511.697.640476513
channel ORA_DISK_1: control file restore from autobackup complete
output filename=+DBDG/dws/controlfile/current.256.638648487
output filename=+FLASHDG/dws/controlfile/current.256.638648489
Finished restore at 05-DEC-07
RMAN> recover database;
Starting recover at 05-DEC-07
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 12/05/2007 15:16:10
ORA-00210: cannot open the specified control file
RMAN>
Any idea why this is happening?
Regards,
Soma Sekhar Karri

Something which you should have looked up prior to posting
00210, 00000, "cannot open the specified controlfile"
// *Cause: Cannot open the controlfile.
// *Action: Check to make sure the controlfile exists and is not locked by
// some other program.
Sybrand Bakker
Senior Oracle DBA

Similar Messages

ORA-00210: cannot open the specified controlfile

Hi,
We are trying to run a package remotly and while executing the package . we are getting ORA-00210: cannot open the specified controlfile. I did crosscheck the controlfile through v$controlfile parameter and the ctlfile shows there. I did also go thorugh with metalink, it says you need to chech weather some process has locked it, or the max number of open file limit of OS. I would appriciate, if you can describe both of the above options.
OS Solaris
DB 9.2.0.8.0
hare krishna
Alok

Thanks Damorgan, I've verified it by checking the alert.log file and I also switch logfiles, it's working absolutly file. I am going to paste the comple error stack.
Connecting to the database CHRY_STAGE_STG.
ORA-00210: cannot open the specified controlfile
: controlfile: '/u700/oradata/pubint/control01.ctl'
ORA-27041: unable to open file
SVR4 Error: 24: Too many open files
Additional information: 3
ORA-06512: at "CHRY_STAGE_STG.DIFF_UTILS", line 1080
ORA-06512: at "CHRY_STAGE_STG.PKG_GROUP_IMG_CROSS_REFERENCE", line 199
ORA-06512: at line 6
Process exited.
Disconnecting from the database CHRY_STAGE_STG.
and when I verfied the diff_utils at line 1080 , I found the following.
EXECUTE IMMEDIATE 'INSERT /*+ APPEND */ INTO ' || p_HistoryTable ||
'( SELECT ' || p_column || ' FROM ' || p_MasterTable || ' A INNER JOIN ' ||
p_CurrentTable || ' B ON A.' || p_Keys || ' = B.' || p_Keys || ')';
hare krishna
Alok

Mac Word 2008 - hyperlink message "Word cannot open the specified file"

I'm using WordMac 2008 version 12.2.5 and after following detailed instructions on how to hyperlink chapters in a Table of Contents to their respective chapters in a book, I can only get the message "Word cannot open the specified file".
Any ideas what could be wrong?
My OSX is 10.5.1.
The instructions I followed are pasted below and are copied from the Smashwords Style Guide: http://www.smashwords.com/books/view/52
START OF PASTE FROM SMASHWORDS STYLE GUIDE:
How to create a linked Table of Contents. Consider this feature in “beta.” My
thanks to Smashwords author Cheryl Anne Gardner for sharing these tips below,
which I have augmented based on my own experience adding a ToC to the Style
Guide (woo hoo!).
By adding a linked table of contents, you can help readers navigate your
document. This is especially useful for non-fiction. Most fiction doesn’t
need it. If you follow the instructions below, the ToC should work in your
EPUB, MOBI and PDF files, but it will not work in our other formats.
First, create your table of contents where you want it by typing it out. Make
sure the text is normalized just like the rest of your Smashwords’ Word
document. Example:
Contents
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Etc.
Next, we are going to create the BookMarks. In Word 2000, 2003 and 2007, the
Booksmark function is under the Insert tab. Go through your document, and at
each Chapter Start or Indexed item, you will highlight it and then select
Insert: bookmark. Name your bookmark corresponding to the Chapter/Indexed
item and then click add. It’s very important to use the first word of your
heading you’re linking to, because later on, when you add the hyperlinks,
Word displays the bookmark shortcuts in alphabetical order. With many
bookmarks, I found many of my bookmarks weren’t labeled properly, so it was
tough to link to the correct bookmark. If you want to link to a chapter named
How to Publish Ebooks, I’d recommend naming your bookmark
“HowToPublishEbooks” to make it easy to locate. If you instead name it,
“publishebooks,” you’ll frazzle your brain and make mistakes.
Repeat the process above for every Chapter Start as well as for other matter
in the book like index, bibliography, epilogue, prologue, etc. I didn’t link
to every section in the Style Guide, because otherwise the ToC would have
been three pages long. This is your call.
Next, return to your table of contents and highlight the word “Contents.”
Click insert, bookmark, and label this last bookmark “Contents”. Formatting
note: Bookmarks cannot have spaces or odd characters. If instead of
“Contents” you called the label in the document Table of Contents, as I did,
then when you insert the bookmark, name the bookmark “TableofContents,” one
word, or “toc.”
Next, add the hyperlinks to your Chapter Starts. In your table of contents,
if Chapter 1 is called Chapter 1, then highlight Chapter 1 and then click
insert Hyperlink. As you can see in the Style Guide, I tried to use more
descriptive labels. In Word’s Hyperlink menu on the left hand side, select
“Place in this document.” You will now see your bookmarks listed in the main
window. Select Chapter1 bookmark (or whatever you labeled it) and then click
ok. Do this procedure for every chapter and piece of matter in the table of
contents.
Final step. Now you can link back to the Table of contents. Move through your
document to each indexed item or Chapter start and highlight it. Then click
insert, hyperlink, and then select “Place in this document.” When the
bookmarks are showing in the main window, select the bookmark labeled
“Contents,” assuming that’s what you named your Table of Contents. Do this
for each and every chapter and or indexed item.
After you are done, all your links will be underlined. You will need to test
and make sure you linked everything properly. In most Word versions, you just
click on the hyperlink to test. In Word 2007, you may need to Ctrl-Click each
hyperlink and make sure it takes you where you need to go in the document.
Advice: Word has an automatic ToC generation feature under the reference tab.
Do not use this. It uses automated headings and formatting to generate the
ToC and this will un-normalize your text and cause font conversion issues in
your Smashwords files.
END OF PASTE FROM SMASHWORDS STYLE GUIDE.
I did all that as described but I still get the message "Word cannot open the specified file".
Could you help please?

This question would be better addressed to...
http://www.microsoft.com/mac/help.mspx
I think the operative phrase from that article is...
*Consider this feature in “beta.”*
-mj

The system cannot open the device or file specified

I am trying to install jsdk.142 but i get an error message that says "The system cannot open the device or file specified" Any suggestions on how to get past this?

I figured it out myself. The temp folder that the program was using was encrypted. I removed the encryption and it installed fine.

Error Happened at RFC Server Cannot Open the Job Batch File.

We have BW 7.0 and Data services 12.1. We are scheduling a Infopackage in BW that triggers a job in Dataservices server.
We had checked the connection between Dataservices source system in BW and RFC server on Dataservices side and these connections are good. on the 3rd party sellections tab in infopackage we specify the batch file name that we exported in Dataservices server. When we execute the infopackage we get the following error.
Error Happened at RFC Server Cannot Open the Job Batch File.
This error started occuring from yesterday and prior to that it was working fine. We are not understanding what changed in the system to cause this error.
Can anyone suggest any solutions for the above issue.
Thanks,
Naveen.

I'm not sure what the root cause would be here. Is the file still available ? Did file permissions change ? ...
But I wanted to point your attention to the fact that in Data Services/Data Integrator XI 3.2 (=12.2) we significantly enhanced the integration with BW. In XI 3.2, the RFC server is now integrated into the Data Services Management Console (so no need to start as a seperate executable) and you can start jobs from BW by just specifting the job's name in the repo (no need anymore to export execution commands to .bat files). So if upgrading to XI 3.2 is an option, things should go much smoother.
More details on the wiki : http://wiki.sdn.sap.com/wiki/display/BOBJ/Loading+BW
Thanks,
Ben.

Won't Install in Win XP "The system cannot open the device or file specifie

When installing Quichktime or iTunes, the installer displays ""The system cannot open the device or file specified."
What should I do?

I was getting this problem too. To resolve I did the following.
Physically disconnected PC from network.
Stopped Anti Virus (Evira personal).
Turned off Windows Firewall.
Stopped Malware detection (PrevX).
Installed iTunes + Quicktime.
Restarted above security programs.
Reconnected to network.
Problem sorted.

MDT 2012 - Update Deploymentshare: Unable to open the specified WIM file

Hi @ all
wie have updated our Litetouch boot image using DISM and know we try to update the deploymentshare but we get the following error.
=== Making sure the deployment share has the latest x86 tools ===
=== Processing LiteTouchPE (x86) boot image ===
Building requested boot image profile.
System.Management.Automation.CmdletInvocationException: Unable to open the specified WIM file. ---> System.Exception: Unable to open the specified WIM file. ---> System.ComponentModel.Win32Exception: The system cannot find the file specified
   --- End of inner exception stack trace ---
   at Microsoft.BDD.Core.BDDWimFile..ctor(String wimPath, Boolean forUpdate)
   at Microsoft.BDD.PSSnapIn.UpdateDeploymentPoint.UpdateBootImage(String template, String platform, String dpPath, Boolean createISO, String isoName)
   at Microsoft.BDD.PSSnapIn.UpdateDeploymentPoint.ProcessRecord()
   at System.Management.Automation.CommandProcessor.ProcessRecord()
   --- End of inner exception stack trace ---
   at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate)
   at System.Management.Automation.Runspaces.LocalPipeline.InvokeHelper()
   at System.Management.Automation.Runspaces.LocalPipeline.InvokeThreadProc()
Unable to open the specified WIM file? The image ist is stil in the boot folder.
Anybody an idea or an solution for that problem?
Thank's
Adrian

I had installed ADK to utilize the latest and greatest DISM tool. That broke WAIK and the boot.wim could not be found when updating the deployment shares. Thanks for the pointer...
Paul Prindle MCP, A+
That is because WAIK and ADK are unsupported as side-by-side installations.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
How to ask a question that is fixable.

Safari cannot open the specified address as OS X does not recognise the internet address starting with "aam". Please please can someone shed some light on this, its driving me MAD!!!

when i try to download the software onto my mac, i receive a message saying that safari cannot open the specified address as OS X does not recognise the internet address starting with "aam". Please please can someone shed some light on this, its driving me MAD!!!

Try and download the Desktop Application First before trying to install any other Adobe Product. The link for AAM is Safari looking for Desktop Application in your machine.
Creative Cloud Help | Creative Cloud for desktop

Mac OS 10.9.4 cannot open the NEF/RAW files from the new Nikon D810 Camera

I have a new Nikon D810 camera. My new iMac cannot open the NEF/RAW files from it...Anyone have any knowledge of this?

If you will take the time to send Apple feedback, they will add RAW support - when I got my Canon, it wasn't supported either. I filed feedback and, two months, later, there was an update which included my camera model.
http://www.apple.com/feedback/macosx.html

I am trying to side load XBMC/KODI to my FireTV. I cannot open the Gotham .APK file. I says no app available. I'm not sure what app to download. Please help.

I am trying to side load XBMC/KODI to my FireTV. I cannot open the Gotham .APK file. I says no app available. I'm not sure what app to download. Please help.

Try a site focused on hacking the fire TV... maybe something like this...
http://bit.ly/1BsVrje

I cannot open the old numbers file on my new ipad today

Today i cannot open the old file, but i can create and open the new file. I try to shut down the ipad and reopen it, but it is the same. What should i do?

You will find that it is the size of the photos which are the problem. Give it time - let the wheel churn!
Other considerations -
Try sending her some to see what happens.
Get you wife to send a single photo to see what happens!
Finally, try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

I can't open the creative cloud app installer, i'm getting an error message that says safari cannot open the specified address

i had previously installed it so i could use the 30 day trials, but i deleted i from my machine. now it won't open even though i purchased the creative cloud.

Mebridge please begin the installation process in a different web browser. You can also download the Creative Cloud Desktop application from Creative Cloud Help | Creative Cloud for desktop.

Safari cannot open the page because the first character is invalid, how can I fix?

I cannot open PDF's. Error message appears saying, Safari cannot open the specified webpage because the first character is unrecognizable". What do I need to do to fix it?

Hi..
Go to /Library/Internet Plug-Ins
Move the Adobe PDF browser plugin (or PDF browser plugin) to the Trash.
Quit then relaunch Safari.

Working in Windows 8.1, trying to open Lightroom 3.6 64 bit, get the error message: Windows cannot access the specified device, path or file. You may no have th appropriate permissions to access the item.

Working in Windows 8.1, trying to open Lightroom 3.6 64 bit, get the error message: Windows cannot access the specified device, path or file. You may no have th appropriate permissions to access the item. I have changed the permissions to everyone and it doesn't work

Any suggestions please?

When I try to open iTunes, I get this error message: Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item. I get a different error message if I try to uninstall it.

When I try to open iTunes, I get this error message: "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." I've been able to uninstall all Apple products except iTunes as I get this error message: "The Installer has insufficent privileges to modify this file: C:\Program Files\i Tunes\Acknowledgments.rtf." I've had the iTunes on my laptop for a year and a half with no problems until now.

Any suggestions please?

ORA-00210: cannot open the specified control file

Similar Messages

Maybe you are looking for