ORA-01000 Error - NEED Help
Hi,
I had an Oracle Cursor error ORA-01000, here is the message:
*** SESSION ID:(171.9) 2001.08.17.08.56.41.000
*** 2001.08.17.08.56.41.000
ksedmp: internal or fatal error
ORA-01000: maximum open cursors exceeded
----- PL/SQL Call Stack -----
object line object
handle number name
143f2430 68 function SARMSUN1.SSP_GET_WO_LOG
143ff578 1 anonymous block
Could someone explain me what is the number 68 means?
I am trying to debug the code that causes this problem and i need
undertand what is really happening here.
Any help would be highly appreciated...thx in adv.
'Larger time' means 'later time'. The specified time is too old for the actual flashback period, behind the scope of available SCNs.
Werner
Similar Messages
-
Acrobat Error - need help! - Acrobat 9 Pro
When I try to open an acrobat files my it trys to Open EVERY acrobat file on my computer and does so until I get the following message
"There was an error opening this document. The maximum number of files are already open. No other files can be opened or printed until some are closed"
Then I have to force quit.
This just started happending a few months ago
I am on a Mac OSX
I need help! Any suggestions?
DebbieI have a 10.5.8
I am not that technical so not sure what you mean about applejack etc.
Thanks for helping!
Debbie
Date: Sat, 10 Apr 2010 13:03:28 -0600
From: [email protected]
To: [email protected]
Subject: Acrobat Error - need help! - Acrobat 9 Pro
What version of OS X? Some people have luck by clearing their caches. This can be done with Applejack in 10.5. Onyx will work in SL.
> -
Ora-00604 error and ora 01000 error while report generation.
hi all,
I am trying to generate the multiple reports of same template through a program.
While this job is running, i get the following error at the BIP console and the reports don't get generated.
[101711_044115578][][EXCEPTION] java.sql.SQLException: ORA-00604: error occurred
at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
ORA-00604: error occurred at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
ORA-01000: maximum open cursors exceeded
Kindly help.
Thanks.Lots of resources with a simple search to see what this is about, for example:
http://www.orafaq.com/wiki/ORA-01000
ORA-01000: maximum open cursors exceeded
Cause: A host language program attempted to open too many cursors. The initialization parameter OPEN_CURSORS determines the maximum number of cursors per user.
Action: Modify the program to use fewer cursors. If this error occurs often, shut down Oracle, increase the value of OPEN_CURSORS, and then restart Oracle.
open_cursors parameter
http://download.oracle.com/docs/cd/E11882_01/server.112/e25513/initparams160.htm#REFRN10137
Oracle support note:
OERR: ORA-1000 maximum open cursors exceeded (Doc ID 18591.1) -
Hi,
I get this error and i really don't know what to do..
C:\Documents and Settings\Sorin>sqlplus /nolog
SQL*Plus: Release 11.2.0.1.0 Production on Sat Jul 2 19:03:43 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> conn system/password@scoala
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptorCan you advise me of what to do?
Edited by: Roger22 on 02.07.2011 19:05Roger22 wrote:
Yes, probably they have been asked (e.g. ora-12514 error) and i already have googled it. But maybe i have a problem that i did not found already on google or on this forum. And maybe here i can get helpThis particular error is not arcane or difficult to debug. Did you read the link I gave you? There's really only 3 steps
on the client - tnsping - to see where the connection request is going and what service is being requested.
on the server - lsnrctl - to see what services the listener supports.
If the listener supports no services, the database needs to be register itself with the listener. -
Exception error, Need Help!
Need help!
Why my java program work well under C:\, but can't under D:\Java today? It worked well even yesterday. I had tried the "Hello World", it can not work under D:\Java either.
when I enter the "java d:\java\Hello" order(after javac of cause), those displays are here:
Exception in thread "main" java.lang.NoClassDefFoundError: d:\java\Hello
Caused by: java.lang.ClassNotFoundException:d:\java\Hello
at java.net.URLClassLoader$1.run<URLClassLoader.java:200>
at java.security.AccessController.doPrivileged<Native Method>
at java.net.URLClassLoader.findClass<URLClassLoader.java:188>
at java.lang.ClassLoader.loadClass<ClassLoader.java:306>
at sun.misc.Launcher$AppClassLoader.loadClass<Launcher.java:276>
at java.lang.ClassLoader.loadClass<ClassLoader.java:251>
at java.lang.ClassLoader.loadClassInternal<ClassLoader.java:319>
The Hello.java has no problem,and it worked well even yesterday!
I just don't know what had happened.
Someone who can help me please reply or email at [email protected]
Thank you!The simple "Hello World" can work under Editplus, but can't under DOS.
The error appears as the same. I don't know what I should do, could you tell me please?
Thank you!First test whether environment variables had been set properlyor not
To test :-
1) Open cmd
2) type java
3) If it runs that means you have set it properly
Then go to your program directory i.e d:\java\
and type
javac Hello.java //to compile it and then
java Hello //To run it -
General exception error need help!
Experts,
i am facing this problem. i connect to the net by proxy (through office Lan). none of the java applets work for me. Need help
Java Plug-in 1.5.0_08
Using JRE version 1.5.0_08 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\mkrishna
network: Loading user-defined proxy configuration ...
network: Done.
network: Loading direct proxy configuration ...
network: Done.
network: Proxy Configuration: No proxy
basic: Cache is enabled
basic: Location: C:\Documents and Settings\mkrishna\Application Data\Sun\Java\Deployment\cache\javapi\v1.0
basic: Maximum size: unlimited
basic: Compression level: 1
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
basic: Registered modality listener
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@872380, refcount=1
basic: Registered modality listener
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@872380, refcount=2
basic: Registered modality listener
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@872380, refcount=3
basic: Added progress listener: sun.plugin.util.GrayBoxPainter@15212bc
basic: Loading applet ...
basic: Initializing applet ...
basic: Starting applet ...
basic: Added progress listener: sun.plugin.util.GrayBoxPainter@97a560
basic: Loading applet ...
basic: Initializing applet ...
basic: Starting applet ...
basic: Added progress listener: sun.plugin.util.GrayBoxPainter@1ea5671
basic: Loading applet ...
basic: Initializing applet ...
basic: Starting applet ...
basic: httpCompression = true
network: Connecting http://150.101.78.39/dsmapp/catalog/classes/liste.jar with proxy=DIRECT
network: Connecting http://150.101.78.39/dsmapp/catalog/classes/ZoneFavoris.class with proxy=DIRECT
network: Connecting http://150.101.78.39/dsmapp/catalog/classes/ZoneFavoris.class with proxy=DIRECT
network: Connecting http://150.101.78.39/dsmapp/catalog/classes/Outline.class with proxy=DIRECT
network: Connecting http://150.101.78.39/dsmapp/catalog/classes/ZoneFavoris/class.class with proxy=DIRECT
network: Connecting http://150.101.78.39/dsmapp/catalog/classes/ZoneFavoris/class.class with proxy=DIRECT
load: class ZoneFavoris.class not found.
java.lang.ClassNotFoundException: ZoneFavoris.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 more
basic: Exception: java.lang.ClassNotFoundException: ZoneFavoris.class
java.lang.ClassNotFoundException: ZoneFavoris.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 more
basic: Modality pushed
basic: Modality pushed
basic: Modality pushed
basic: Modality popped
basic: Modality popped
basic: Modality popped
basic: Modality pushed
basic: Modality pushed
basic: Modality pushed
basic: Modality popped
basic: Modality popped
basic: Modality popped
network: Connecting http://150.101.78.39/dsmapp/catalog/classes/Outline/class.class with proxy=DIRECT
load: class ZoneFavoris.class not found.
java.lang.ClassNotFoundException: ZoneFavoris.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 more
basic: Exception: java.lang.ClassNotFoundException: ZoneFavoris.class
java.lang.ClassNotFoundException: ZoneFavoris.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 more
basic: Modality pushed
basic: Modality pushed
basic: Modality pushed
basic: Modality popped
basic: Modality popped
basic: Modality popped
load: class Outline.class not found.
java.lang.ClassNotFoundException: Outline.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 more
basic: Exception: java.lang.ClassNotFoundException: Outline.class
java.lang.ClassNotFoundException: Outline.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 more
basic: Modality pushed
basic: Modality pushed
basic: Modality pushed
basic: Modality popped
basic: Modality popped
basic: Modality poppedHi
I think you need to configure proxy for the JRE
If you are using windows Go to control panel , you will find an icon called java plugin. if you have installed multiple JRE you will find multiple icons . Select the one which is configured to browser.
You will find a proxies tab in that window , add the proxy details there
Hope this helps you
Vijay -
ORA-29278: SMTP transient error - Need Help
I am getting below error from my code block though i am not calling UTL_SMTP package.
It is confusing to me and I am not getting how to debug this.
Please help me.
My Orable DB Version - Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
Error Message
ERROR: -29278 ORA-29278: SMTP transient error: 421 Service not
available
ORA-06512: at "SYS.UTL_SMTP", line 20
ORA-06512: at "SYS.UTL_SMTP",
line 96
ORA-06512: at "SYS.UTL_SMTP", line 138
ORA-06512: at "W_ADM_DW.DW
PL/SQL procedure successfully completed.
{code}
*Pseudo-code of my code block*
{code}
VARIABLE Ret number
set serveroutput on size 20000
show serveroutput
DECLARE
--Local variable declaration
BEGIN
select count(*)
into v_count
from <Table_Name>
where <Column_Name>=<YYYYMM>;
if v_count > 0 then
SELECT PARTITION_NAME
INTO v_partition_name
FROM ALL_TAB_PARTITIONS
WHERE TABLE_NAME='<Table_Name>'
AND INSTR(PARTITION_NAME,<YYYYMM>,1,1)<>0;
v_sql := utl_particion.truncate_partition('&3','<Table_Name>', v_partition_name);
if v_sql!=0 then
raise_application_error(-20088,'Error in Truncate partition');
:Ret := 2;
end if;
commit;
end if;
v_sql:='alter session enable resumable timeout 72000 name ''<Table_Name>''';
execute immediate v_sql;
v_sql := ' INSERT /*+ APPEND*/ INTO '<Table_Name>'';
v_sql := v_sql || ' ( <column_name1>, ';
v_sql := v_sql || ' <column_name2>, ';
v_sql := v_sql || ' <column_name3>, ';
v_sql := v_sql || ' <column_name4>, ';
v_sql := v_sql || ' ) ';
v_sql := v_sql || ' SELECT /*+ PARALLEL(<Source_Table_Name>,6)*/';
v_sql := v_sql || ' <column_name1>, ';
v_sql := v_sql || ' <column_name2>, ';
v_sql := v_sql || ' <column_name3>, ';
v_sql := v_sql || ' <column_name4>, ';
v_sql := v_sql || ' FROM <Source_Table_Name> WHERE <column_name> BETWEEN ' || v_frm_date || ' AND ' || v_to_date;
execute immediate v_sql;
v_total:=SQL%ROWCOUNT;
commit;
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
dbms_output.put_line ('ERROR: '|| SQLCODE || ' ' || substr(SQLERRM,1,200));
:Ret := 2;
END;
{code}Thanks for identifying utl_particionpackage. I tried to check the code of this package, but it has wrapped, so i cannot see the code.
But one thing i have observed - If utl_particion.truncate_partition internally calling UTL_SMTP package and I am getting error from this package then this will catch by below code -
v_sql := utl_particion.truncate_partition('&3','<Table_Name>', v_partition_name);
if v_sql!=0 then
raise_application_error(-20088,'Error in Truncate partition');
:Ret := 2;
end if;and after that it will catch by user define error exception block (This i did not mention in my earlier post)
WHEN excepcion_ctrl THEN
dbms_output.put_line (WRN: '|| substr(SQLERRM,4,200));
:Ret:=0;But it has catch by when others exception -
I think inside utl_particion.truncate_partition procedure has proper exception handling. So when some error will occur it will return '0'. If there is no proper exception handling then we can assume the error will propagate to When Others Exception block.
Please tell me my understanding is correct or not. -
ORA-01031 Error; please help
hai, iam getting a strange error,
i have this procedure which is created successfully. but giving me insufficient privileges message inserted into error log.
Also when iam writing the create table statement individually, it is creating a table.
create table ACTIVITIES as select * from ACTIVITIES@x_old;
i have dba privilege on the current database
create or replace procedure get_old_tab_scr
is
lv_msg varchar2(500);
lv_code number(10);
begin
for i in (select table_name from user_tables@x_old)
loop
execute immediate 'create table '||i.table_name||' as select * from '||i.table_name||'@x_old';
dbms_output.put_line('create table '||i.table_name||' as select * from '||i.table_name||'@x_old');
end loop;
exception
when others then
lv_code := sqlcode;
lv_msg := sqlerrm;
insert into error_log values('get_old_tab_scr -'||sysdate||lv_code||'-'||lv_msg);
end;
can i get some help regarding this...Purpose:
~~~~~~~~
Purpose of the document is to show the limitations of roles and privileges under
PL/SQL.
Due to these limitations, you may get errors in PL/SQL procedures/packages when
accessing certain objects or packages, but the same code works in SQL*Plus
The flagged errors are ORA-00942 or ORA-01933 or ORA-01031 and ORA-06512 or
PLS-00201 and ORA-06550 or ORA-28111 with Fine Grained Auditing (FGA)
Note that the generated errors may differ in each release.
Explanation:
~~~~~~~~~~~~
The fundamental misunderstanding with these problems is because of the misconception
that roles that are granted to one user can be applied to another by intermediate
objects such as views or pl/sql procedures, this is not possible, roles exist in
sessions and are associated with a user in an active session only, the privileges
of a role can not be transferred to objects.
If you're accessing tables/views in PL/SQL procedure or package and getting
either ORA-1031 or ORA-942 (or PLS-201), but the same select/update/insert/delete
works ok on SQL*Plus, then you need to check if the privileges have been granted
to the user creating the procedure via a role.
Privileges granted via role are disabled inside stored procedures
Detailed case studies follow: -
User Error Needs Help Correcting - Repeatable Tag on Custom Section Attribute
OK, I have v.6111. Today I am manually putting the supplier_eq_create tag on all the the existing attributes in our custom sections so suppliers can add them when we send eQs. Unfortuately, I accidently clicked on the Repeatable tag instead of Supplier_EQ_Create in a couple of instances in our Export/Staging Environment. When I try to remove the Repeatable tag, I get the error that says " row's Repeatable status cannot be altered after the row has been activated" ... we have not actually used the repeatable functionality of the tag. I need to know how I can remove this tag from active attributes due to human error before I import to PROD. Can the forum help me?
Best, BeckieHi Beckie,
As long as you are sure that no-one has consume this you can remove this tag with a database script.
As with every script make sure that you backup your data.
With the following script you can find the rows that contain repeatable tag for a particular section template
select rowTemplate.* from eaSectionDynamicTagJoins rowTTagjoin
inner join commonEARowTemplate rowTemplate on rowTemplate.pkid = rowTTagjoin.fkEAS
inner join commonLookups tag on tag.pkid = rowTTagjoin.fkTag
inner join commonEASectionTemplate sectionTemplate on sectionTemplate.pkid = rowTemplate.fkSectionTemplate
where tag.Name = 'Repeatable' and langID = 0 and Category = 'EASRowDynamicTag'
and sectionTemplate.id = '<custom section id>';
Tags are linked to custom section row templates using eaSectionDynamicTagJoins table.
You can remove the tag from a specific row using the following script
delete from eaSectionDynamicTagJoins
where fkEAS = '<pkid of the row>';
Hope this helps. Let me know if you have any questions,
Dmitriy -
[PartyName1 [6672]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Transaction (Process ID 1414) was deadlocked on lock resources with another process and has been chosen as the
deadlock victim. Rerun the transaction.".you need to provide Details about your package like what is source/destination.. any SQL query/where is the exact deadlock point.
Please check the following links which may help you.
http://blogs.technet.com/b/fort_sql/archive/2011/12/12/get-rid-of-deadlocks.aspx
http://msdn.microsoft.com/en-us/library/ms191242.aspx
Let us TRY this |
My Blog :: http://quest4gen.blogspot.com/ -
When i am trying to type my licence key i get an error need help quick!
when i am typing my serial number into adobe photoshop cs6 i get an error can someone other get me an other key please
Nope, sorry, not on a user to user help forum.
I hope you haven't waited for this response before taking other action. You'll need to call Adobe customer support on the telephone to resolve licensing issues.
Anticipating your next question, the phone number is available from Adobe's web site. Look at each page and imagine where they might have hidden it. Hint: Start with MENU.
-Noel -
HTTP Server (Main) error need help.
Hello,
We are having the following error in the HTTP Server logs and need to understand what is causing this issue.
[Tue Dec 19 15:29:35 2006] [error] [client 192.168.228.32] [ecid: 962577774223,1] File does not exist: d:/oracle/product/oh_as_mid/forms/java/oracle/forms/engine/RunformBundle_en_AU.class
[Tue Dec 19 15:29:35 2006] [error] [client 192.168.228.32] [ecid: 2216708226414,1] File does not exist: d:/oracle/product/oh_as_mid/forms/java/oracle/forms/engine/RunformBundle_en_AU.class
[Tue Dec 19 15:29:35 2006] [error] [client 192.168.228.32] [ecid: 4484450958748,1] File does not exist: d:/oracle/product/oh_as_mid/forms/java/oracle/forms/engine/RunformBundle_en_AU.properties
[Tue Dec 19 15:30:25 2006] [error] [client 192.168.228.32] [ecid: 1166509825:192.168.228.32:1712:2352:20,0] (10054)An existing connection
was forcibly closed by the remote host: MOD_OC4J_0087: Got an unexpected error while calling send() to send a message to oc4j and the
error code is 10054.
[Tue Dec 19 15:30:25 2006] [error] [client 192.168.228.32] [ecid: 1166509825:192.168.228.32:1712:2352:20,0] MOD_OC4J_0053: Failed to call
network routine to send out an ajp13 buffer message to oc4j.
[Tue Dec 19 15:30:25 2006] [warn] [client 192.168.228.32] [ecid: 1166509825:192.168.228.32:1712:2352:20,0] MOD_OC4J_0027: Failed to send
out an ajp13 message to oc4j.
[Tue Dec 19 15:30:25 2006] [error] [client 192.168.228.32] [ecid: 1166509825:192.168.228.32:1712:2352:20,0] MOD_OC4J_0026: Failed to marshal
a request to ajp13 message headers or send them to the web container.
[Tue Dec 19 15:32:43 2006] [error] [client 192.168.228.32] [ecid: 2921083055113,1] File does not exist: d:/oracle/product/oh_as_mid/forms/java/oracle/ewt/alert/resource/AlertBundle_en_AU.class
[Tue Dec 19 15:32:43 2006] [error] [client 192.168.228.32] [ecid: 5360624479132,1] File does not exist: d:/oracle/product/oh_as_mid/forms/java/oracle/ewt/alert/resource/AlertBundle_en_AU.class
[Tue Dec 19 15:32:43 2006] [error] [client 192.168.228.32] [ecid: 911038360600,1] File does not exist: d:/oracle/product/oh_as_mid/forms/java/oracle/ewt/alert/resource/AlertBundle_en_AU.properties
[Tue Dec 19 15:32:46 2006] [error] [client 192.168.228.32] [ecid: 2921083055113,1] File does not exist: d:/oracle/product/oh_as_mid/forms/java/oracle/ewt/alert/resource/AlertBundle_en_AU.class
[Tue Dec 19 15:32:46 2006] [error] [client 192.168.228.32] [ecid: 4793688799699,1] File does not exist: d:/oracle/product/oh_as_mid/forms/java/oracle/ewt/alert/resource/AlertBundle_en_AU.class
[Tue Dec 19 15:32:46 2006] [error] [client 192.168.228.32] [ecid: 859498756624,1] File does not exist: d:/oracle/product/oh_as_mid/forms/java/oracle/ewt/alert/resource/AlertBundle_en_AU.properties
Any help would be great.More information from the OC4J_BI_Forms application log file.
06/12/20 07:44:35 formsweb: Forms session <78> failed during startup: no response from runtime process
06/12/20 07:44:35 formsweb: Forms session <78> exception stack trace:
oracle.forms.engine.RunformException: Forms session <78> failed during startup: no response from runtime process
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534) -
CRW32.exe error NEED HELP
I get an error when I click on the print preview button, then I click thru the records using the right arrow in the records field at the top of the screen. I can get to page 3 but when I click it again I get the error "crw32.exe has encountered a problem and needs to close. We are sorry for the inconvenience." AppName: crw32.exe AppVer: 12.2.0.290 ModName: cslibu-3-0.dll
ModVer: 12.2.0.290 Offset: 000023a7
Can anyone help me with this?? I have to get a job out today and I cant do anything!!What happens if you create a new report that has more than 3 pages of data?
I suggest you purchase a case and get a support engineer tyo help you debug this:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551
Thank you
Don -
I keep getting this error when opening itunes. I have deleted itunes and re downloaded. still not working. can someone help!
iTunes has encountered a problem and needs to close. We are sorry for the inconvenience.Never mind I fixed this problem had to delete the apple support folder as well and then reinstall then turn off compatibility mode because I got the Quicktime failed to initialize error and Then it worked fine.
-
Ora - 00600 error plz help urgent
hello all sir plz. help would should i do.
by mistake i made changes in spfile file.... after that i got this error
any solution ?
plz. help sir
SQL> create pfile from spfile;
create pfile from spfile
ERROR at line 1:
ORA-00600: internal error code, arguments: [733], [538970164], [pga heap], [],
help sir
waiting for replyfirst of all
thanx for my reply
sir i have bkp through rman but when i am connect to rman it give me error
2. i have no pfile<sid>.ora file
3. i try to start my database through pfile text file i got error..
plz. reply sir what should i do.....
how can i connect rman....
C:\>set oracle_sid=db01
C:\>rman target sys/oracle@db01
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
C:\>
again thanx.
i have full database bkp through rman.
Maybe you are looking for
-
Automatic Backup not working like it should
Is anyone else having any problems with their iDevice not doing the automatic iCloud backups? Ever since I installed iOS 5, I have had to run the iCloud backup manually and its a little concerning that it wont run automatically.
-
Shared partition creation (SAN EVA 4400) for OCR/Vote andASM on linux RHEL5
Hi all, We are going to install database (Oracle 10g) with RAC on Linux Red Hat Enterprise 5. The storage we are using is SAN shared storage, out SAN vendor has finished to configure and present the dsk storage (500 Gb) to the 2 servers, the name of
-
Thousands of object in java ???
Hi, Do you think a "normal application" (running on a laptop) could support the creation of 2 or 3 thousand objects ? How many memory is needed for an object instanciating a 100 line class using standard sun packages ? Tack
-
Can I use Adobe Digital Editions with a Nook HD+?
-
Missing preview fullscreen zoom and trackpad gestures
in 10.5 it was possible to zoom a picture or pdf in preview's fullscreen mode with cmd and +/-. but in 10.6 it seems to be no longer possible. some say that you still can zoom in fullscreen mode with trackpad gestures. but is there a solution without