ORA-01017 error while using a database link

Hi all,
I have a TNS entry as below
HOME=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=10.66.205.110)(PORT=1521))
(CONNECT_DATA=(SID=HOME))
I have created a database link as
create public database link link92.com using 'HOME'.
This was created successfully and an entry was made in all_db_links table.
However if i try connecting to a table in the remote database...for example
select * from emp@link92;
I am receiving an error ORA-01017(Invalid username passwd).
Would appreciate if somebody could help me out.
Thank you

It is not that the Database Link is "PUBLIC" that makes it use the current username/password.
It is that the Database Link has been created without specifying a " CONNECT TO username IDENTIFIED BY password " that makes the DBLink behave as a "current user database link" using the current username/password to connect to the remote database.
You can have a PUBLIC database link that uses a "CONNECT TO username IDENTIFIED BY password" such that all connections use the same remote username and password.
You can also have "private" (ie not PUBLIC) database link that does not specify a "CONNECT TO username IDENTIFIED BY password" which becomes a "current user [owner] database link".

Similar Messages

ORA-12709: error while loading create database character set

I installed Oracle 8.05 on Linux successfully: was able to login
whith SQLPlus, start and stop the db whith svrmgrl etc.
During this install I chose WE8ISO8859P9 as the database
characterset when prompted.
After that I installed Oracle Application Server 3.02, and now
I'm getting the
ORA-12709: error while loading create database character set
message when I try to start up the database, and the database
won't mount.
Platform is RedHat Linux 5.2.
NLS_LANG set to different settings,
e.g. AMERICAN_AMERICA.WE8ISO8859P9
but without success.
Anyone any clue?
Thanks!
null

Jogchum Reitsma (guest) wrote:
: I installed Oracle 8.05 on Linux successfully: was able to
login
: whith SQLPlus, start and stop the db whith svrmgrl etc.
: During this install I chose WE8ISO8859P9 as the database
: characterset when prompted.
: After that I installed Oracle Application Server 3.02, and now
: I'm getting the
: ORA-12709: error while loading create database character set
: message when I try to start up the database, and the database
: won't mount.
: Platform is RedHat Linux 5.2.
: NLS_LANG set to different settings,
: e.g. AMERICAN_AMERICA.WE8ISO8859P9
: but without success.
: Anyone any clue?
: Thanks!
You can create the database with WE8DEC character set
and to use the WE8ISO8859P9 on the client or even on Linux.
The NLS_LANG setting doesn't effect the database, but the
interface with the database. The same setting can be used in de
windows 95/98/NT registry.
null

ORA-12709: error while loading create database character set after upgrade

Dear All
i m getting ORA-12709: error while loading create database character set, After upgraded the database from 10.2.0.3 to 11.2.0.3 in ebusiness suit env.
current application version 12.0.6
please help me to resolve it.
SQL> startup;
ORACLE instance started.
Total System Global Area 1.2831E+10 bytes
Fixed Size 2171296 bytes
Variable Size 2650807904 bytes
Database Buffers 1.0133E+10 bytes
Redo Buffers 44785664 bytes
ORA-12709: error while loading create database character set
-bash-3.00$ echo $ORA_NLS10
/u01/oracle/PROD/db/teche_st/11.2.0/nls/data/9idata
export ORACLE_BASE=/u01/oracle
export ORACLE_HOME=/u01/oracle/PROD/db/tech_st/11.2.0
export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/perl/bin:$PATH
export PERL5LIB=$ORACLE_HOME/perl/lib/5.10.0:$ORACLE_HOME/perl/site_perl/5.10.0
export ORA_NLS10=/u01/oracle/PROD/db/teche_st/11.2.0/nls/data/9idata
export ORACLE_SID=PROD
-bash-3.00$ pwd
/u01/oracle/PROD/db/tech_st/11.2.0/nls/data/9idata
-bash-3.00$ ls -lh |more
total 56912
-rw-r--r-- 1 oracle oinstall 951 Jan 15 16:05 lx00001.nlb
-rw-r--r-- 1 oracle oinstall 957 Jan 15 16:05 lx00002.nlb
-rw-r--r-- 1 oracle oinstall 959 Jan 15 16:05 lx00003.nlb
-rw-r--r-- 1 oracle oinstall 984 Jan 15 16:05 lx00004.nlb
-rw-r--r-- 1 oracle oinstall 968 Jan 15 16:05 lx00005.nlb
-rw-r--r-- 1 oracle oinstall 962 Jan 15 16:05 lx00006.nlb
-rw-r--r-- 1 oracle oinstall 960 Jan 15 16:05 lx00007.nlb
-rw-r--r-- 1 oracle oinstall 950 Jan 15 16:05 lx00008.nlb
-rw-r--r-- 1 oracle oinstall 940 Jan 15 16:05 lx00009.nlb
-rw-r--r-- 1 oracle oinstall 939 Jan 15 16:05 lx0000a.nlb
-rw-r--r-- 1 oracle oinstall 1006 Jan 15 16:05 lx0000b.nlb
-rw-r--r-- 1 oracle oinstall 1008 Jan 15 16:05 lx0000c.nlb
-rw-r--r-- 1 oracle oinstall 998 Jan 15 16:05 lx0000d.nlb
-rw-r--r-- 1 oracle oinstall 1005 Jan 15 16:05 lx0000e.nlb
-rw-r--r-- 1 oracle oinstall 926 Jan 15 16:05 lx0000f.nlb
-rw-r--r-- 1 oracle oinstall 1.0K Jan 15 16:05 lx00010.nlb
-rw-r--r-- 1 oracle oinstall 958 Jan 15 16:05 lx00011.nlb
-rw-r--r-- 1 oracle oinstall 956 Jan 15 16:05 lx00012.nlb
-rw-r--r-- 1 oracle oinstall 1005 Jan 15 16:05 lx00013.nlb
-rw-r--r-- 1 oracle oinstall 970 Jan 15 16:05 lx00014.nlb
-rw-r--r-- 1 oracle oinstall 950 Jan 15 16:05 lx00015.nlb
-rw-r--r-- 1 oracle oinstall 1.0K Jan 15 16:05 lx00016.nlb
-rw-r--r-- 1 oracle oinstall 957 Jan 15 16:05 lx00017.nlb
-rw-r--r-- 1 oracle oinstall 932 Jan 15 16:05 lx00018.nlb
-rw-r--r-- 1 oracle oinstall 932 Jan 15 16:05 lx00019.nlb
-rw-r--r-- 1 oracle oinstall 951 Jan 15 16:05 lx0001a.nlb
-rw-r--r-- 1 oracle oinstall 944 Jan 15 16:05 lx0001b.nlb
-rw-r--r-- 1 oracle oinstall 953 Jan 15 16:05 lx0001c.nlb
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
ORACLE_HOME = /u01/oracle/PROD/db/tech_st/11.2.0
System name: SunOS
Node name: proddb3.zakathouse.org
Release: 5.10
Version: Generic_147440-19
Machine: sun4u
Using parameter settings in server-side spfile /u01/oracle/PROD/db/tech_st/11.2.0/dbs/spfilePROD.ora
System parameters with non-default values:
processes = 200
sessions = 400
timed_statistics = TRUE
event = ""
shared_pool_size = 416M
shared_pool_reserved_size= 40M
nls_language = "american"
nls_territory = "america"
nls_sort = "binary"
nls_date_format = "DD-MON-RR"
nls_numeric_characters = ".,"
nls_comp = "binary"
nls_length_semantics = "BYTE"
memory_target = 11G
memory_max_target = 12G
control_files = "/u01/oracle/PROD/db/apps_st/data/cntrl01.dbf"
control_files = "/u01/oracle/PROD/db/tech_st/10.2.0/dbs/cntrl02.dbf"
control_files = "/u01/oracle/PROD/db/apps_st/data/cntrl03.dbf"
db_block_checksum = "TRUE"
db_block_size = 8192
compatible = "11.2.0.0.0"
log_archive_dest_1 = "LOCATION=/u01/oracle/PROD/db/apps_st/data/archive"
log_archive_format = "%t_%s_%r.dbf"
log_buffer = 14278656
log_checkpoint_interval = 100000
log_checkpoint_timeout = 1200
db_files = 512
db_file_multiblock_read_count= 8
db_recovery_file_dest = "/u01/oracle/fast_recovery_area"
db_recovery_file_dest_size= 14726M
log_checkpoints_to_alert = TRUE
dml_locks = 10000
undo_management = "AUTO"
undo_tablespace = "APPS_UNDOTS1"
db_block_checking = "FALSE"
session_cached_cursors = 500
utl_file_dir = "/usr/tmp"
utl_file_dir = "/usr/tmp"
utl_file_dir = "/u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound"
utl_file_dir = "/u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound/PROD_proddb3"
utl_file_dir = "/usr/tmp"
plsql_code_type = "INTERPRETED"
plsql_optimize_level = 2
job_queue_processes = 2
cursor_sharing = "EXACT"
parallel_min_servers = 0
parallel_max_servers = 8
core_dump_dest = "/u01/oracle/PROD/db/tech_st/10.2.0/admin/PROD_proddb3/cdump"
audit_file_dest = "/u01/oracle/admin/PROD/adump"
db_name = "PROD"
open_cursors = 600
pga_aggregate_target = 1G
workarea_size_policy = "AUTO"
optimizer_secure_view_merging= FALSE
aq_tm_processes = 1
olap_page_pool_size = 4M
diagnostic_dest = "/u01/oracle"
max_dump_file_size = "20480"
Tue Jan 15 16:16:02 2013
PMON started with pid=2, OS id=18608
Tue Jan 15 16:16:02 2013
PSP0 started with pid=3, OS id=18610
Tue Jan 15 16:16:03 2013
VKTM started with pid=4, OS id=18612 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Tue Jan 15 16:16:03 2013
GEN0 started with pid=5, OS id=18616
Tue Jan 15 16:16:03 2013
DIAG started with pid=6, OS id=18618
Tue Jan 15 16:16:03 2013
DBRM started with pid=7, OS id=18620
Tue Jan 15 16:16:03 2013
DIA0 started with pid=8, OS id=18622
Tue Jan 15 16:16:03 2013
MMAN started with pid=9, OS id=18624
Tue Jan 15 16:16:03 2013
DBW0 started with pid=10, OS id=18626
Tue Jan 15 16:16:03 2013
LGWR started with pid=11, OS id=18628
Tue Jan 15 16:16:03 2013
CKPT started with pid=12, OS id=18630
Tue Jan 15 16:16:03 2013
SMON started with pid=13, OS id=18632
Tue Jan 15 16:16:04 2013
RECO started with pid=14, OS id=18634
Tue Jan 15 16:16:04 2013
MMON started with pid=15, OS id=18636
Tue Jan 15 16:16:04 2013
MMNL started with pid=16, OS id=18638
DISM started, OS id=18640
ORACLE_BASE from environment = /u01/oracle
Tue Jan 15 16:16:08 2013
ALTER DATABASE MOUNT
ORA-12709 signalled during: ALTER DATABASE MOUNT...

ORA-12709 signalled during: ALTER DATABASE MOUNT...Do you have any trace files generated at the time you get this error?
Please see these docs.
ORA-12709: WHILE STARTING THE DATABASE [ID 1076156.6]
Upgrading from 9i to 10gR2 Fails With ORA-12709 : Error While Loading Create Database Character Set [ID 732861.1]
Ora-12709 While Trying To Start The Database [ID 311035.1]
ORA-12709 when Mounting the Database [ID 160478.1]
How to Move From One Database Character Set to Another at the Database Level [ID 1059300.6]
Thanks,
Hussein

ERROR WHILE CREATING A DATABASE LINK USING HETEROGENEOUS SERVICES

I'm creating a database link with the Oracle Dataware Builder, and i get the following error:
Probando...
Fallo.
SQL Exception
Error del repositorio: Excepción SQL.
Nombre de la Clase: CacheMediator.
Nombre del Método: getDDEntryFromDB.
Mensaje de Error del Repositorio: ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Informix][Informix ODBC Driver][Informix]Incorrect password or user [email protected] is not known on the database server. (SQL State: 28000; SQL Code: -951)
ORA-02063: preceding 2 lines from PRUEBA_SEH
As you can see i'm using heterogeneus services to connect to a informix database. ALTIADM is a valid user for that database, i don't send my ip address 192.168.0.62, but the error says "[email protected] is not known in the database server". how can i solve it?????

Right places to ask this question are
Heterogeneous Connectivity
Warehouse Builder

ERROR WHILE CREATING A DATABASE LINK TO INFORMIX

I'm creating a database link with the Oracle Dataware Builder, and i get the following error:
Probando...
Fallo.
SQL Exception
Error del repositorio: Excepción SQL.
Nombre de la Clase: CacheMediator.
Nombre del Método: getDDEntryFromDB.
Mensaje de Error del Repositorio: ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Informix][Informix ODBC Driver][Informix]Incorrect password or user [email protected] is not known on the database server. (SQL State: 28000; SQL Code: -951)
ORA-02063: preceding 2 lines from PRUEBA_SEH
As you can see i'm using heterogeneus services to connect to a informix database. ALTIADM is a valid user for that database, i don't send my ip address 192.168.0.62, but the error says "[email protected] is not known in the database server". how can i solve it?????

Right places to ask this question are
Heterogeneous Connectivity
Warehouse Builder

ORA-01458 error while using Pro*C to invoke PL/SQL procedure, pls help

I am using Pro*C (Oracle 10g on Itanium platform) to invoke PL/SQL procedure to read RAW data from database, but always encoutered ORA-01458 error message.
Here is the snippet of Pro*C code:
typedef struct dataSegment
     unsigned short     len;
     unsigned char     data[SIZE_DATA_SEG];
} msg_data_seg;
EXEC SQL TYPE msg_data_seg IS VARRAW(SIZE_DATA_SEG);
     EXEC SQL BEGIN DECLARE SECTION;
          unsigned short qID;
          int rMode;
          unsigned long rawMsgID;
          unsigned long msgID;
          unsigned short msgType;
          unsigned short msgPriority;
          char recvTime[SIZE_TIME_STRING];
          char schedTime[SIZE_TIME_STRING];
          msg_data_seg dataSeg;
          msg_data_seg dataSeg1;
          msg_data_seg dataSeg2;
          short     indSeg;
          short     indSeg1;
          short     indSeg2;
     EXEC SQL END DECLARE SECTION;
     qID = q_id;
     rMode = (int)mode;
     EXEC SQL EXECUTE
          BEGIN
               SUMsg.read_msg (:qID, :rMode, :rawMsgID, :msgID, :msgType, :msgPriority, :recvTime,
                    :schedTime, :dataSeg:indSeg, :dataSeg1:indSeg1, :dataSeg2:indSeg2);
          END;
     END-EXEC;
     // Check PL/SQL execute result, different from SQL
     // Only 'sqlcode' and 'sqlerrm' are always set
     if (sqlca.sqlcode != 0)
          if (sqlca.sqlcode == ERR_QUEUE_EMPTY)          // Queue empty
               throw q_eoq ();
          char msg[513];                                        // Other errors
          size_t msg_len;
          msg_len = sqlca.sqlerrm.sqlerrml;
          strncpy (msg, sqlca.sqlerrm.sqlerrmc, msg_len);
          msg[msg_len] = '\0';
          throw db_error (string(msg), sqlca.sqlcode);
and here is the PL/SQL which is invoked:
SUBTYPE VarChar14 IS VARCHAR2(14);
PROCEDURE read_msg (
     qID          IN     sumsg_queue_def.q_id%TYPE,
     rMode          IN     INTEGER,
     raw_msgID     OUT     sumsg_msg_data.raw_msg_id%TYPE,
     msgID          OUT sumsg_msg_data.msg_id%TYPE,
     msgType          OUT sumsg_msg_data.type%TYPE,
     msgPrior     OUT sumsg_msg_data.priority%TYPE,
     msgRecv          OUT VarChar14,
     msgSched     OUT VarChar14,
     msgData          OUT sumsg_msg_data.msg_data%TYPE,
     msgData1     OUT sumsg_msg_data.msg_data1%TYPE,
     msgData2     OUT sumsg_msg_data.msg_data2%TYPE
) IS
BEGIN
     IF rMode = 0 THEN
          SELECT raw_msg_id, msg_id, type, priority, TO_CHAR(recv_time, 'YYYYMMDDHH24MISS'),
               TO_CHAR(sched_time, 'YYYYMMDDHH24MISS'), msg_data, msg_data1, msg_data2
               INTO raw_msgID, msgID, msgType, msgPrior, msgRecv, msgSched, msgData, msgData1, msgData2
               FROM (SELECT * FROM sumsg_msg_data WHERE q_id = qID AND status = 0 ORDER BY sched_time, raw_msg_id)
               WHERE ROWNUM = 1;
     ELSIF rMode = 1 THEN
          SELECT raw_msg_id, msg_id, type, priority, TO_CHAR(recv_time, 'YYYYMMDDHH24MISS'),
               TO_CHAR(sched_time, 'YYYYMMDDHH24MISS'), msg_data, msg_data1, msg_data2
               INTO raw_msgID, msgID, msgType, msgPrior, msgRecv, msgSched, msgData, msgData1, msgData2
               FROM (SELECT * FROM sumsg_msg_data WHERE q_id = qID AND status = 0 ORDER BY recv_time, raw_msg_id)
               WHERE ROWNUM = 1;
     ELSE
          SELECT raw_msg_id, msg_id, type, priority, TO_CHAR(recv_time, 'YYYYMMDDHH24MISS'),
               TO_CHAR(sched_time, 'YYYYMMDDHH24MISS'), msg_data, msg_data1, msg_data2
               INTO raw_msgID, msgID, msgType, msgPrior, msgRecv, msgSched, msgData, msgData1, msgData2
               FROM (SELECT * FROM sumsg_msg_data WHERE q_id = qID AND status = 0 ORDER BY priority, raw_msg_id)
               WHERE ROWNUM = 1;
     END IF;
     UPDATE sumsg_msg_data SET status = 1 WHERE raw_msg_id = raw_msgID;
EXCEPTION
     WHEN NO_DATA_FOUND THEN
          raise_application_error (-20102, 'Queue empty');
END read_msg;
where sumsg_msg_data.msg_data%TYPE, sumsg_msg_data.msg_data1%TYPE and sumsg_msg_data.msg_data2%TYPE are all defined as RAW(2000). When I test the PL/SQL code seperately, everything is ok, but if I use the Pro*C code to read, the ORA-01458 always happen, unless I change the SIZE_DATA_SEG value to 4000, then it passes, and the result read out also seems ok, either the bigger or smaller value will encounter ORA-01458.
I think the problem should happen between the mapping from internal datatype to external VARRAW type, but cannot understand why 4000 bytes buffer will be ok, is it related to some NLS_LANG settings, anyone can help me to resolve this problme, thanks a lot!

It seems that I found the way to avoid this error. Now each time before I read RAW(2000) data from database, i initialize the VARRAW.len first, set its value to SIZE_DATA_SEG, i.e., the outside buffer size, then the error disappear.
Oracle seems to need this information to handle its data mapping, but why output variable also needs this initialization, cannot precompiler get this from the definition of VARRAW structure?
Anyone have some suggestion?

PLSQL Error while using collections dATABASE:10G

Hi,
I am getting below error while compiling below code:
Error: DML statement without BULK In-BIND cannot be used inside FORALL
Could you suggest.
create or replace PROCEDURE V_ACCT_MTH ( P_COMMIT_INTERVAL NUMBER DEFAULT 10000)
is
CURSOR CUR_D_CR_ACCT_MTH
IS
SELECT * FROM D_ACCT_MTH;
TYPE l_rec_type IS TABLE OF CUR_D_CR_ACCT_MTH%ROWTYPE
INDEX BY PLS_INTEGER;
v_var_tab    l_rec_type;
v_empty_tab l_rec_type;
v_error_msg VARCHAR2(80);
v_err_code   VARCHAR2(30);
V_ROW_CNT NUMBER :=0;
--R_DATA    NUMBER :=1;
BEGIN
OPEN CUR_D_CR_ACCT_MTH;
v_var_tab := v_empty_tab;
LOOP
    FETCH CUR_D_CR_ACCT_MTH BULK COLLECT INTO v_var_tab LIMIT P_COMMIT_INTERVAL;
    EXIT WHEN v_var_tab.COUNT=0;
        FORALL R_DATA IN 1..v_var_tab.COUNT
           INSERT INTO ACCT_F_ACCT_MTH
            DATE_KEY
           ,ACCT_KEY
           ,P_ID
           ,ORG_KEY
           ,FDIC_KEY
           ,BAL
           ,BAL1
           ,BAL2
           ,BAL3
           ,BAL4
           ,BAL5
           ,BAL6
           ,BAL7
           ,BAL8
           ,BAL9
           ,BAL10
           ,BAL11
           ,BAL12
           ,BAL13
           ,BAL14
           ,BAL15
           VALUES
           DATE_KEY(R_DATA)
          ,ACCT_KEY(R_DATA)
          ,P_ID(R_DATA)
          ,ORG_KEY(R_DATA)
          ,FDIC_KEY(R_DATA)
          ,BAL(R_DATA)
          ,BAL(R_DATA)
          ,BAL(R_DATA)
          ,BAL(R_DATA)
          ,BAL(R_DATA)
          ,BAL(R_DATA)
          ,BAL(R_DATA)
          ,BAL(R_DATA)
          ,BAL(R_DATA)
          ,BAL(R_DATA)
          ,BAL(R_DATA)
          ,BAL(R_DATA)
          ,BAL(R_DATA)
          ,BAL(R_DATA)
          ,BAL(R_DATA)
          ,BAL(R_DATA)
        COMMIT;
END LOOP;
CLOSE CUR_D_CR_ACCT_MTH;
EXCEPTION
WHEN OTHERS THEN
v_error_msg:=substr(sqlerrm,1,50);
v_err_code :=sqlcode;
DBMS_OUTPUT.PUT_LINE(v_error_msg,v_err_code);
END V_ACCT_MTH;

931832 wrote:
Here i am using above method using forall because of large volume of data.Which is a FLAWED approach. Always.
FORALL is not suited to "move/copy" large amounts of data from one table to another.
Any suggestion ?Use only SQL. It is faster. It has less overheads. It can execute in parallel.
So execute it in parallel to move/copy that data. You can roll this manually via the DBMS_PARALLEL_EXECUTE interface. Simplistic example:
declare
        taskName        varchar2(30) default 'PQ-task-1';
        parallelSql     varchar2(1000);
begin
        --// create trask
        DBMS_PARALLEL_EXECUTE.create_task( taskName );
        --// chunk the table by rowid ranges
        DBMS_PARALLEL_EXECUTE.create_chunks_by_rowid(
                task_name => taskName,
                table_owner => user,
                table_name => 'D_ACCT_MNTH',
                by_row => true,
                chunk_size => 100000
        --// create insert..select statement to copy a chunk of rows
        parallelSql := 'insert into acct_f_acct_mth select * from d_acct_mnth
                        where rowid between :start_id and :end_id';
        --// run the task using 5 parallel processes
        DBMS_PARALLEL_EXECUTE.Run_Task(
                task_name => taskName,
                sql_stmt => parallelSql,
                language_flag => DBMS_SQL.NATIVE,
                parallel_level => 5
        --// wait for it to complete
        while DBMS_PARALLEL_EXECUTE.task_status( taskName ) != DBMS_PARALLEL_EXECUTE.Finished loop
                DBMS_LOCK.Sleep(10);
        end loop;
        --// remove task
        DBMS_PARALLEL_EXECUTE.drop_task( taskName );
end;
/Details in Oracle® Database PL/SQL Packages and Types Reference guide.
For 10g, the EXACT SAME approach can be used - by determining the rowid chunks/ranges via a SQL and then manually running parallel processes as DBMS_JOB. See {message:id=1108593} for details.

ORA-03113: Error while upgrading the Database from 11.1.0.6 to 11.1.0.7

Hi,
I am trying to upgrade the database from 11.1.0.6 to 11.1.0.7 on OEL operating system.
After applying the patch "6890831" when trying to start the database using "Startup Upgrade" command I am getting the below error.
ORA-03113: end-of-file on communication channel
Process ID: 20826
Session ID: 170 Serial number: 3
I am getting the same error when trying to create the new database using "DBCA".
Please provide me the probable outcomes.
Thanks
Amith

Below entries found in alert_orcl.log file
MMNL started with pid=15, OS id=20571
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/app/oracle
Thu Dec 03 20:11:11 2009
ALTER DATABASE MOUNT
Errors in file /u01/app/oracle/diag/rdbms/orcl/orcl/trace/orcl_mman_20557.trc:
ORA-27103: internal error
Linux-x86_64 Error: 11: Resource temporarily unavailable
Additional information: -1
Additional information: 1
MMAN (ospid: 20557): terminating the instance due to error 27103
Instance terminated by MMAN, pid = 20557
Below entries found in the Trace file generated
error 27103 detected in background process
ORA-27103: internal error
Linux-x86_64 Error: 11: Resource temporarily unavailable
Additional information: -1
Additional information: 1
*** 2009-12-03 20:11:14.727
MMAN (ospid: 20557): terminating the instance due to error 27103

[Q] ORA-30510 error while doing full database import

We have ORACLE 9.2.0.6 on Redhat LINUX AS 3.4. while we doing "full database import" there has ORA-30510 come out. I searched Metalink and Google, but not found much information. The error messages on import are:
. importing OUTLN's objects into OUTLN
. importing SYSTEM's objects into SYSTEM
. importing TKOWNER's objects into TKOWNER
IMP-00017: following statement failed with ORACLE error 30510:
"CREATE TRIGGER "TKOWNER".TRIG_DONOTANALYZE before analyze on schema decla"
"re begin if sys.dictionary_obj_name = 'MYWTKEMPLOYEE' then raise_ap"
"plication_error(-20101, 'Do Not ANALYZE MYWTKEMPLOYEE'); end if; end; "
IMP-00003: ORACLE error 30510 encountered
ORA-30510: system triggers cannot be defined on the schema of SYS user
. importing SYS's objects into SYS
. importing TKOWNER's objects into TKOWNER
About to enable constraints...
Import terminated successfully with warnings.

877410 wrote:
Hi I get the following ierrors while importing a schema from prod to dev database... can anyone help ,thanks!
impdp system DIRECTORY=DATA_PUMP_DIR DUMPFILE=abcdprod.DMP LOGFILE=abcdprod.log REMAP_SCHEMA=abcdprod:abcddev
ORA-39002: invalid operation
ORA-31694: master table "SYSTEM"."SYS_IMPORT_FULL_01" failed to load/unload
ORA-31644: unable to position to block number 170452 in dump file "/ots/oracle/echo/wxyz/datapump/abcdprod.DMPpost complete command line for the expdp that made the abcdprod.DMP file

ORA-12547 error while creating new database through dbca

i installed oracle 10g R2 on parallels virtuozzo container. (it is a product similar to openvz and solaris containers)
added: oracle version is 10.2.0.1.0
the installation goes off without too much fuss but when i try to create a general purpose database through dbca it throws up an error
ORA-12547 : TNS lost contact
my listener is up and runing and did stop and restart it. i also created a new listener after deleting the previous one.
still the error persists.
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=oracle)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date                19-MAY-2009 15:39:06
Uptime                    0 days 0 hr. 55 min. 56 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /export/home/oracle/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File         /export/home/oracle/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC0)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfullyi am running dbca from oracle user only and i did ensure that the contents of the oracle home directory (on which oracle is installed) has permissions of oracle:oinstall.
i am clueless as to what is causing this error.
just to add to issues which i faced during installation on virtuozzo containers. containers does not allow me to create a swap space. but i had to ignore the error and go ahead with the installation with most of the steps followed from http://wiki.openvz.org/Oracle_10g_VE.
please guide
Edited by: iinfi on May 19, 2009 4:53 PM

hi all
virtuozzo during creation of containers doesnt install the following.
sysstat-5.0.5-1
libaio-0.3.103-3
libaio-0.3.103-3 (i386)
libaio-devel-0.3.103-3
the oracle documentation tells us to install the following and so i didnt know i had to install other packages as well.
make-3.79.1
gcc-3.2.3-34
glibc-2.3.2-95.20
compat-db-4.0.14-5
compat-gcc-7.3-2.96.128
compat-gcc-c++-7.3-2.96.128
compat-libstdc++-7.3-2.96.128
compat-libstdc++-devel-7.3-2.96.128
openmotif21-2.1.30-8
setarch-1.3-1
thanks for your time.

Get ORA-12560 error while accessing 11g database

Database version: 11.2.0.1.0
This is a development database running on CentOS. We had setup this database recently and everything has been fine. Today I noticed that when I connect to the database from remote, I get the following error -
ORA-12560: TNS:protocol adapter error
I'm able to get in to the database after logging in directly into the database server via putty. I have stopped & restarted the database, but with no help. I have checked the environment variables (ORACLE_HOME, ORACLE_SID) and they seem to be fine.
Can you please help on what might be the problem here? Is this something to do with some change in the OS firewall setting?
Edited by: museshad on Dec 20, 2012 12:44 PM

lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 20-DEC-2012 13:27:55
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date                27-AUG-2012 16:50:42
Uptime                    114 days 20 hr. 37 min. 13 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File         /u01/app/oracle/diag/tnslsnr/xxxx/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xxxx)(PORT=1521)))
Services Summary...
Service "orcl.ENTERPRISENET.ORG" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB.ENTERPRISENET.ORG" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
listener.ora
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
tnsnames.ora
ORCL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl.ENTERPRISENET.ORG)
)

Error while using wbutil Client_OLE2.create_obj('Excel...ora-06508

I am facing ora-06508 error while using webutil. Have done all setup as per "How to Configure Webutil in Forms 11g ".
Error on following statement "Client_OLE2.create_obj('Excel.Application')"
FRM-40375, ORA-06508.
Waiting for Help.
Thanks;
Edited by: umairm on Apr 20, 2012 10:16 AM

Hi
It is mentioned in webutil doc that, you must regenerate webutil.pll before using it; otherwise you’ll encounter error ORA-06508 when running a form with the attached library.
Hope this helps...
Regards,
Amatu Allah

Error while loading create database charecter set

Hello,
I have completed instalation Oracle 9iV2 on Redhat 7.3 without any problems.
After I reboot the system, and try to start database, I have got error mesage:
ORA-12709: error while loading create database character set
Could anyone help?
Thanks

ORA-12709 error while loading create database character set
Cause: This is an internal error.
Action: Contact Oracle Support Services.

Help : error while loading create database character set

SQL> startup
ORACLE instance started.
Total System Global Area 599785472 bytes
Fixed Size 2022600 bytes
Variable Size 180355896 bytes
Database Buffers 411041792 bytes
Redo Buffers 6365184 bytes
ORA-12709: error while loading create database character set

ORA-12709 error while loading create database character set
Cause: This is an internal error.
Action: Contact Oracle Support Services.

APP-RG-09518: An error occurred while creating a database link

Hi All,
While creating a database link in Oracle EBS from one instance to another instance for transferring FSG reports
Go to Any GL Setup responsibility...Setup>System>Database links > Create new database link
Prior to the above...below steps should be done on the server.
1.grant create database link to <apps.user>; (on db server)
2.source tns entry should be in destination tns file and destination tns entry in source tns file. (check tnsping after entry)
3.*make sure destination tns entry of 8.0.6 oracle home should be in source tns file* (Because we are creating db link for the application)
4.Run the Program FSG Report.
Regards,
Harish Muramshetty.

Hi,
I have solved the issue as below:
This error was started when I install a software which I have made myself and it uses sql server compact edition 3.5.
I saw when I manually replaced the sql related files from "C:\Program Files (x86)\Microsoft SQL Server Compact Edition\v3.5" with the files which my software setup had "version 3.5.5386.0" then the error started. And if copy back the latest version 3.5.8080.0
then it disappear. So use latest sql files in your software too.
My software was replacing the the latest files with older version.
Muhammad Arshad Awan

ORA-01017 error while using a database link

Similar Messages

Maybe you are looking for