[Q] ORA-30510 error while doing full database import
We have ORACLE 9.2.0.6 on Redhat LINUX AS 3.4. while we doing "full database import" there has ORA-30510 come out. I searched Metalink and Google, but not found much information. The error messages on import are:
. importing OUTLN's objects into OUTLN
. importing SYSTEM's objects into SYSTEM
. importing TKOWNER's objects into TKOWNER
IMP-00017: following statement failed with ORACLE error 30510:
"CREATE TRIGGER "TKOWNER".TRIG_DONOTANALYZE before analyze on schema decla"
"re begin if sys.dictionary_obj_name = 'MYWTKEMPLOYEE' then raise_ap"
"plication_error(-20101, 'Do Not ANALYZE MYWTKEMPLOYEE'); end if; end; "
IMP-00003: ORACLE error 30510 encountered
ORA-30510: system triggers cannot be defined on the schema of SYS user
. importing SYS's objects into SYS
. importing TKOWNER's objects into TKOWNER
About to enable constraints...
Import terminated successfully with warnings.
877410 wrote:
Hi I get the following ierrors while importing a schema from prod to dev database... can anyone help ,thanks!
impdp system DIRECTORY=DATA_PUMP_DIR DUMPFILE=abcdprod.DMP LOGFILE=abcdprod.log REMAP_SCHEMA=abcdprod:abcddev
ORA-39002: invalid operation
ORA-31694: master table "SYSTEM"."SYS_IMPORT_FULL_01" failed to load/unload
ORA-31644: unable to position to block number 170452 in dump file "/ots/oracle/echo/wxyz/datapump/abcdprod.DMPpost complete command line for the expdp that made the abcdprod.DMP file
Similar Messages
-
ORA-12709: error while loading create database character set
I installed Oracle 8.05 on Linux successfully: was able to login
whith SQLPlus, start and stop the db whith svrmgrl etc.
During this install I chose WE8ISO8859P9 as the database
characterset when prompted.
After that I installed Oracle Application Server 3.02, and now
I'm getting the
ORA-12709: error while loading create database character set
message when I try to start up the database, and the database
won't mount.
Platform is RedHat Linux 5.2.
NLS_LANG set to different settings,
e.g. AMERICAN_AMERICA.WE8ISO8859P9
but without success.
Anyone any clue?
Thanks!
nullJogchum Reitsma (guest) wrote:
: I installed Oracle 8.05 on Linux successfully: was able to
login
: whith SQLPlus, start and stop the db whith svrmgrl etc.
: During this install I chose WE8ISO8859P9 as the database
: characterset when prompted.
: After that I installed Oracle Application Server 3.02, and now
: I'm getting the
: ORA-12709: error while loading create database character set
: message when I try to start up the database, and the database
: won't mount.
: Platform is RedHat Linux 5.2.
: NLS_LANG set to different settings,
: e.g. AMERICAN_AMERICA.WE8ISO8859P9
: but without success.
: Anyone any clue?
: Thanks!
You can create the database with WE8DEC character set
and to use the WE8ISO8859P9 on the client or even on Linux.
The NLS_LANG setting doesn't effect the database, but the
interface with the database. The same setting can be used in de
windows 95/98/NT registry.
null -
ORA-12709: error while loading create database character set after upgrade
Dear All
i m getting ORA-12709: error while loading create database character set, After upgraded the database from 10.2.0.3 to 11.2.0.3 in ebusiness suit env.
current application version 12.0.6
please help me to resolve it.
SQL> startup;
ORACLE instance started.
Total System Global Area 1.2831E+10 bytes
Fixed Size 2171296 bytes
Variable Size 2650807904 bytes
Database Buffers 1.0133E+10 bytes
Redo Buffers 44785664 bytes
ORA-12709: error while loading create database character set
-bash-3.00$ echo $ORA_NLS10
/u01/oracle/PROD/db/teche_st/11.2.0/nls/data/9idata
export ORACLE_BASE=/u01/oracle
export ORACLE_HOME=/u01/oracle/PROD/db/tech_st/11.2.0
export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/perl/bin:$PATH
export PERL5LIB=$ORACLE_HOME/perl/lib/5.10.0:$ORACLE_HOME/perl/site_perl/5.10.0
export ORA_NLS10=/u01/oracle/PROD/db/teche_st/11.2.0/nls/data/9idata
export ORACLE_SID=PROD
-bash-3.00$ pwd
/u01/oracle/PROD/db/tech_st/11.2.0/nls/data/9idata
-bash-3.00$ ls -lh |more
total 56912
-rw-r--r-- 1 oracle oinstall 951 Jan 15 16:05 lx00001.nlb
-rw-r--r-- 1 oracle oinstall 957 Jan 15 16:05 lx00002.nlb
-rw-r--r-- 1 oracle oinstall 959 Jan 15 16:05 lx00003.nlb
-rw-r--r-- 1 oracle oinstall 984 Jan 15 16:05 lx00004.nlb
-rw-r--r-- 1 oracle oinstall 968 Jan 15 16:05 lx00005.nlb
-rw-r--r-- 1 oracle oinstall 962 Jan 15 16:05 lx00006.nlb
-rw-r--r-- 1 oracle oinstall 960 Jan 15 16:05 lx00007.nlb
-rw-r--r-- 1 oracle oinstall 950 Jan 15 16:05 lx00008.nlb
-rw-r--r-- 1 oracle oinstall 940 Jan 15 16:05 lx00009.nlb
-rw-r--r-- 1 oracle oinstall 939 Jan 15 16:05 lx0000a.nlb
-rw-r--r-- 1 oracle oinstall 1006 Jan 15 16:05 lx0000b.nlb
-rw-r--r-- 1 oracle oinstall 1008 Jan 15 16:05 lx0000c.nlb
-rw-r--r-- 1 oracle oinstall 998 Jan 15 16:05 lx0000d.nlb
-rw-r--r-- 1 oracle oinstall 1005 Jan 15 16:05 lx0000e.nlb
-rw-r--r-- 1 oracle oinstall 926 Jan 15 16:05 lx0000f.nlb
-rw-r--r-- 1 oracle oinstall 1.0K Jan 15 16:05 lx00010.nlb
-rw-r--r-- 1 oracle oinstall 958 Jan 15 16:05 lx00011.nlb
-rw-r--r-- 1 oracle oinstall 956 Jan 15 16:05 lx00012.nlb
-rw-r--r-- 1 oracle oinstall 1005 Jan 15 16:05 lx00013.nlb
-rw-r--r-- 1 oracle oinstall 970 Jan 15 16:05 lx00014.nlb
-rw-r--r-- 1 oracle oinstall 950 Jan 15 16:05 lx00015.nlb
-rw-r--r-- 1 oracle oinstall 1.0K Jan 15 16:05 lx00016.nlb
-rw-r--r-- 1 oracle oinstall 957 Jan 15 16:05 lx00017.nlb
-rw-r--r-- 1 oracle oinstall 932 Jan 15 16:05 lx00018.nlb
-rw-r--r-- 1 oracle oinstall 932 Jan 15 16:05 lx00019.nlb
-rw-r--r-- 1 oracle oinstall 951 Jan 15 16:05 lx0001a.nlb
-rw-r--r-- 1 oracle oinstall 944 Jan 15 16:05 lx0001b.nlb
-rw-r--r-- 1 oracle oinstall 953 Jan 15 16:05 lx0001c.nlb
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
ORACLE_HOME = /u01/oracle/PROD/db/tech_st/11.2.0
System name: SunOS
Node name: proddb3.zakathouse.org
Release: 5.10
Version: Generic_147440-19
Machine: sun4u
Using parameter settings in server-side spfile /u01/oracle/PROD/db/tech_st/11.2.0/dbs/spfilePROD.ora
System parameters with non-default values:
processes = 200
sessions = 400
timed_statistics = TRUE
event = ""
shared_pool_size = 416M
shared_pool_reserved_size= 40M
nls_language = "american"
nls_territory = "america"
nls_sort = "binary"
nls_date_format = "DD-MON-RR"
nls_numeric_characters = ".,"
nls_comp = "binary"
nls_length_semantics = "BYTE"
memory_target = 11G
memory_max_target = 12G
control_files = "/u01/oracle/PROD/db/apps_st/data/cntrl01.dbf"
control_files = "/u01/oracle/PROD/db/tech_st/10.2.0/dbs/cntrl02.dbf"
control_files = "/u01/oracle/PROD/db/apps_st/data/cntrl03.dbf"
db_block_checksum = "TRUE"
db_block_size = 8192
compatible = "11.2.0.0.0"
log_archive_dest_1 = "LOCATION=/u01/oracle/PROD/db/apps_st/data/archive"
log_archive_format = "%t_%s_%r.dbf"
log_buffer = 14278656
log_checkpoint_interval = 100000
log_checkpoint_timeout = 1200
db_files = 512
db_file_multiblock_read_count= 8
db_recovery_file_dest = "/u01/oracle/fast_recovery_area"
db_recovery_file_dest_size= 14726M
log_checkpoints_to_alert = TRUE
dml_locks = 10000
undo_management = "AUTO"
undo_tablespace = "APPS_UNDOTS1"
db_block_checking = "FALSE"
session_cached_cursors = 500
utl_file_dir = "/usr/tmp"
utl_file_dir = "/usr/tmp"
utl_file_dir = "/u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound"
utl_file_dir = "/u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound/PROD_proddb3"
utl_file_dir = "/usr/tmp"
plsql_code_type = "INTERPRETED"
plsql_optimize_level = 2
job_queue_processes = 2
cursor_sharing = "EXACT"
parallel_min_servers = 0
parallel_max_servers = 8
core_dump_dest = "/u01/oracle/PROD/db/tech_st/10.2.0/admin/PROD_proddb3/cdump"
audit_file_dest = "/u01/oracle/admin/PROD/adump"
db_name = "PROD"
open_cursors = 600
pga_aggregate_target = 1G
workarea_size_policy = "AUTO"
optimizer_secure_view_merging= FALSE
aq_tm_processes = 1
olap_page_pool_size = 4M
diagnostic_dest = "/u01/oracle"
max_dump_file_size = "20480"
Tue Jan 15 16:16:02 2013
PMON started with pid=2, OS id=18608
Tue Jan 15 16:16:02 2013
PSP0 started with pid=3, OS id=18610
Tue Jan 15 16:16:03 2013
VKTM started with pid=4, OS id=18612 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Tue Jan 15 16:16:03 2013
GEN0 started with pid=5, OS id=18616
Tue Jan 15 16:16:03 2013
DIAG started with pid=6, OS id=18618
Tue Jan 15 16:16:03 2013
DBRM started with pid=7, OS id=18620
Tue Jan 15 16:16:03 2013
DIA0 started with pid=8, OS id=18622
Tue Jan 15 16:16:03 2013
MMAN started with pid=9, OS id=18624
Tue Jan 15 16:16:03 2013
DBW0 started with pid=10, OS id=18626
Tue Jan 15 16:16:03 2013
LGWR started with pid=11, OS id=18628
Tue Jan 15 16:16:03 2013
CKPT started with pid=12, OS id=18630
Tue Jan 15 16:16:03 2013
SMON started with pid=13, OS id=18632
Tue Jan 15 16:16:04 2013
RECO started with pid=14, OS id=18634
Tue Jan 15 16:16:04 2013
MMON started with pid=15, OS id=18636
Tue Jan 15 16:16:04 2013
MMNL started with pid=16, OS id=18638
DISM started, OS id=18640
ORACLE_BASE from environment = /u01/oracle
Tue Jan 15 16:16:08 2013
ALTER DATABASE MOUNT
ORA-12709 signalled during: ALTER DATABASE MOUNT...ORA-12709 signalled during: ALTER DATABASE MOUNT...Do you have any trace files generated at the time you get this error?
Please see these docs.
ORA-12709: WHILE STARTING THE DATABASE [ID 1076156.6]
Upgrading from 9i to 10gR2 Fails With ORA-12709 : Error While Loading Create Database Character Set [ID 732861.1]
Ora-12709 While Trying To Start The Database [ID 311035.1]
ORA-12709 when Mounting the Database [ID 160478.1]
How to Move From One Database Character Set to Another at the Database Level [ID 1059300.6]
Thanks,
Hussein -
Import all users and their objects without doing full database import
Hi Guys,
I have a task to that involves Importing all existing users and their objects in production to the test database without doing a full database import - Please how do i do this?
Pls i need your help urgently.SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
I tried to import objects and data from a user from a FULL dump file. File was created with the following command:
server is: SQL*Plus: Release 10.2.0.1.0 - Production on Wed May 26 15:34:05 2010
exp full=y FILE="full.dmp" log=full.log
Now I imported:
imp file=full.dmp log=full.log INCTYPE=SYSTEM
imp fromuser=user1 file=full.dmp
Results: not all the user procedures have been imported:
SQL> select count(*) from user_procedures;
the Original
COUNT(*)
134
the current:
select count(*) from user_procedures;
COUNT(*)
18
I also tried these alternatives:
exp tablespaces="user1_data" FILE="user1.dmp" log=user1.log
exp LOG=user1.log TABLESPACES=user1_data FILE=user1_data.dmp
exp LOG=user1owner.log owner=user1 FILE=user1owner.dmp
expdp DIRECTORY=dpump_dir1 dumpfile=servdata_pump version=compatible SCHEMAS=user1
impdp directory=data_pump_dir dumpfile=servdata_pump.dmp :
ORA-39213: Metadata processing is not available
SQL> execute dbms_metadata_util.load_stylesheets
BEGIN dbms_metadata_util.load_stylesheets; END;
ERROR at line 1:
ORA-31609: error loading file "kualter.xsl" from file system directory
"/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/rdbms/xml/xsl"
ORA-06512: at "SYS.DBMS_METADATA_UTIL", line 1793
ORA-06512: at line 1
file kualter.xsl does not exist in XE !!
imp owner=user1 rows=n ignore=y
imp full=y file=user1_data.dmp
imp full=y file=full.dmp tablespaces=user1_data,user1_index rows=n ignore=y
So, I do not understand why user1 objects are not imported:
see this part of the first import log:
Export file created by EXPORT:V10.02.01 via conventional path
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
. importing SYS's objects into SYS
. importing USER1's objects into USER1
. . importing table .........................
why only 18 rows?
if you have an suggestion, you are welcome, as I do not have any other idea...
ren
Edited by: ronpetitpatapon on May 26, 2010 12:38 PM
Edited by: ronpetitpatapon on May 26, 2010 12:41 PM
Edited by: ronpetitpatapon on May 26, 2010 1:03 PM -
ORA-01017 error while using a database link
Hi all,
I have a TNS entry as below
HOME=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=10.66.205.110)(PORT=1521))
(CONNECT_DATA=(SID=HOME))
I have created a database link as
create public database link link92.com using 'HOME'.
This was created successfully and an entry was made in all_db_links table.
However if i try connecting to a table in the remote database...for example
select * from emp@link92;
I am receiving an error ORA-01017(Invalid username passwd).
Would appreciate if somebody could help me out.
Thank youIt is not that the Database Link is "PUBLIC" that makes it use the current username/password.
It is that the Database Link has been created without specifying a " CONNECT TO username IDENTIFIED BY password " that makes the DBLink behave as a "current user database link" using the current username/password to connect to the remote database.
You can have a PUBLIC database link that uses a "CONNECT TO username IDENTIFIED BY password" such that all connections use the same remote username and password.
You can also have "private" (ie not PUBLIC) database link that does not specify a "CONNECT TO username IDENTIFIED BY password" which becomes a "current user [owner] database link". -
ORA-12547 error while creating new database through dbca
i installed oracle 10g R2 on parallels virtuozzo container. (it is a product similar to openvz and solaris containers)
added: oracle version is 10.2.0.1.0
the installation goes off without too much fuss but when i try to create a general purpose database through dbca it throws up an error
ORA-12547 : TNS lost contact
my listener is up and runing and did stop and restart it. i also created a new listener after deleting the previous one.
still the error persists.
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=oracle)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 19-MAY-2009 15:39:06
Uptime 0 days 0 hr. 55 min. 56 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /export/home/oracle/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /export/home/oracle/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC0)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfullyi am running dbca from oracle user only and i did ensure that the contents of the oracle home directory (on which oracle is installed) has permissions of oracle:oinstall.
i am clueless as to what is causing this error.
just to add to issues which i faced during installation on virtuozzo containers. containers does not allow me to create a swap space. but i had to ignore the error and go ahead with the installation with most of the steps followed from http://wiki.openvz.org/Oracle_10g_VE.
please guide
Edited by: iinfi on May 19, 2009 4:53 PMhi all
virtuozzo during creation of containers doesnt install the following.
sysstat-5.0.5-1
libaio-0.3.103-3
libaio-0.3.103-3 (i386)
libaio-devel-0.3.103-3
the oracle documentation tells us to install the following and so i didnt know i had to install other packages as well.
make-3.79.1
gcc-3.2.3-34
glibc-2.3.2-95.20
compat-db-4.0.14-5
compat-gcc-7.3-2.96.128
compat-gcc-c++-7.3-2.96.128
compat-libstdc++-7.3-2.96.128
compat-libstdc++-devel-7.3-2.96.128
openmotif21-2.1.30-8
setarch-1.3-1
thanks for your time. -
Hi,
I am trying to upgrade the database from 11.1.0.6 to 11.1.0.7 on OEL operating system.
After applying the patch "6890831" when trying to start the database using "Startup Upgrade" command I am getting the below error.
ORA-03113: end-of-file on communication channel
Process ID: 20826
Session ID: 170 Serial number: 3
I am getting the same error when trying to create the new database using "DBCA".
Please provide me the probable outcomes.
Thanks
AmithBelow entries found in alert_orcl.log file
MMNL started with pid=15, OS id=20571
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/app/oracle
Thu Dec 03 20:11:11 2009
ALTER DATABASE MOUNT
Errors in file /u01/app/oracle/diag/rdbms/orcl/orcl/trace/orcl_mman_20557.trc:
ORA-27103: internal error
Linux-x86_64 Error: 11: Resource temporarily unavailable
Additional information: -1
Additional information: 1
MMAN (ospid: 20557): terminating the instance due to error 27103
Instance terminated by MMAN, pid = 20557
Below entries found in the Trace file generated
error 27103 detected in background process
ORA-27103: internal error
Linux-x86_64 Error: 11: Resource temporarily unavailable
Additional information: -1
Additional information: 1
*** 2009-12-03 20:11:14.727
MMAN (ospid: 20557): terminating the instance due to error 27103 -
Get ORA-12560 error while accessing 11g database
Database version: 11.2.0.1.0
This is a development database running on CentOS. We had setup this database recently and everything has been fine. Today I noticed that when I connect to the database from remote, I get the following error -
ORA-12560: TNS:protocol adapter error
I'm able to get in to the database after logging in directly into the database server via putty. I have stopped & restarted the database, but with no help. I have checked the environment variables (ORACLE_HOME, ORACLE_SID) and they seem to be fine.
Can you please help on what might be the problem here? Is this something to do with some change in the OS firewall setting?
Edited by: museshad on Dec 20, 2012 12:44 PMlsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 20-DEC-2012 13:27:55
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 27-AUG-2012 16:50:42
Uptime 114 days 20 hr. 37 min. 13 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/xxxx/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xxxx)(PORT=1521)))
Services Summary...
Service "orcl.ENTERPRISENET.ORG" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB.ENTERPRISENET.ORG" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
tnsnames.ora
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.ENTERPRISENET.ORG)
) -
ORA-01422 Error While Doing Insert
Hello,
I am trying to do a insert using the following code
declare
i number;
ret varchar2(1000);
ret2 varchar2(1000);
ret3 varchar2(1000);
begin
FOR I IN 1..20 LOOP
select sl_no ,ename,addr into ret,ret2,ret3
from
(select u.sl_no as sl_no,
(select ename from table where sl=1 and des = 1 ) as ename ,
T.addr as addr from
tab1 t,tab2 u
where
U.cd = T.cd
and U.code = T.code and U.sl=0+i
union all
select u.sl_no as sl_no,
(select ename from table where sl=1 and des = 1 ) as ename ,
T.addr as addr from
tab1 t,tab2 u
where
U.cd = T.cd
and U.code = T.code and U.sl=0+i);However I am getting error
ORA-01422: exact fetch returns more than requested number of rowsHow could I resolve this problem
Thanks@OP,
Some of the points in your "FULL CODE".
1.You are selecting in a FOR I 1..20 LOOP... The SELECT statement has INTO clause. With UNION (ALL) may be you are expecting (and getting) more than one row in which case you need to define cursor and fetch from the cursor .
2. You have a COMMIT within the loop, it may be ok if you want to commit 20 times! In general, Please commit when the logical unit of work (LUW) is completed. In my experience LUW is normally not completed within a loop.
3. Why even have a LOOP and PL/SQL procedural code?
Why not do the following...
insert into my_table(sl_no,ename,addr)
select sl_no ,ename,addr into ret,ret2,ret3
from
(select u.sl_no as sl_no,
(select ename from table where sl=1 and des = 1 ) as ename ,
T.addr as addr from
tab1 t,tab2 u
where
U.cd = T.cd
and U.code = T.code and U.sl=0+i
union all
select u.sl_no as sl_no,
(select ename from table where sl=1 and des = 1 ) as ename ,
T.addr as addr from
tab1 t,tab2 u
where
U.cd = T.cd
and U.code = T.code and U.sl=0+i);4. If you absolutely have to have PL/SQL code try something like folloing...
declare
i number;
ret varchar2(1000);
ret2 varchar2(1000);
ret3 varchar2(1000);
begin
FOR I IN 1..20 LOOP
FOR x in ( -- "Added"
select sl_no ,ename,addr into ret,ret2,ret3
from
(select u.sl_no as sl_no,
(select ename from table where sl=1 and des = 1 ) as ename ,
T.addr as addr from
tab1 t,tab2 u
where
U.cd = T.cd
and U.code = T.code and U.sl=0+i
union all
select u.sl_no as sl_no,
(select ename from table where sl=1 and des = 1 ) as ename ,
T.addr as addr from
tab1 t,tab2 u
where
U.cd = T.cd
and U.code = T.code and U.sl=0+i)
LOOP ; -- "Added"
insert into my_table(sl_no,ename,addr)
values (ret,ret2,ret3);
end loop; -- "Added"
commit;
end loop;
end;vr,
Sudhakar B. -
Error while doing schema level import using datapump
Hi I get the following ierrors while importing a schema from prod to dev database... can anyone help ,thanks!
impdp system DIRECTORY=DATA_PUMP_DIR DUMPFILE=abcdprod.DMP LOGFILE=abcdprod.log REMAP_SCHEMA=abcdprod:abcddev
ORA-39002: invalid operation
ORA-31694: master table "SYSTEM"."SYS_IMPORT_FULL_01" failed to load/unload
ORA-31644: unable to position to block number 170452 in dump file "/ots/oracle/echo/wxyz/datapump/abcdprod.DMP877410 wrote:
Hi I get the following ierrors while importing a schema from prod to dev database... can anyone help ,thanks!
impdp system DIRECTORY=DATA_PUMP_DIR DUMPFILE=abcdprod.DMP LOGFILE=abcdprod.log REMAP_SCHEMA=abcdprod:abcddev
ORA-39002: invalid operation
ORA-31694: master table "SYSTEM"."SYS_IMPORT_FULL_01" failed to load/unload
ORA-31644: unable to position to block number 170452 in dump file "/ots/oracle/echo/wxyz/datapump/abcdprod.DMPpost complete command line for the expdp that made the abcdprod.DMP file -
Error while loading create database charecter set
Hello,
I have completed instalation Oracle 9iV2 on Redhat 7.3 without any problems.
After I reboot the system, and try to start database, I have got error mesage:
ORA-12709: error while loading create database character set
Could anyone help?
ThanksORA-12709 error while loading create database character set
Cause: This is an internal error.
Action: Contact Oracle Support Services. -
Help : error while loading create database character set
SQL> startup
ORACLE instance started.
Total System Global Area 599785472 bytes
Fixed Size 2022600 bytes
Variable Size 180355896 bytes
Database Buffers 411041792 bytes
Redo Buffers 6365184 bytes
ORA-12709: error while loading create database character setORA-12709 error while loading create database character set
Cause: This is an internal error.
Action: Contact Oracle Support Services. -
Creating database problem with ORA-01519: error while processing file '' ne
Dear all,
I am having rough time with creating database manually. can anyone help me with the following errors.
ALERT LOGFILE:-
Sun May 31 12:00:39 2009
Errors in file d:\oracle\product\10.1.0\admin\oracle5\udump\oracle5_ora_3444.trc:
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '%ORACLE_HOME%\RDBMS\ADMIN\SQL.BSQ' near line 5744
ORA-00604: error occurred at recursive SQL level 1
ORA-01119: error in creating database file 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf'
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
Error 1519 happened during db open, shutting down database
USER: terminating instance due to error 1519
Sun May 31 12:00:39 2009
Errors in file d:\oracle\product\10.1.0\admin\oracle5\bdump\oracle5_reco_3416.trc:
ORA-01519: error while processing file '' near line
CREATE DATABASE SCRIPT:-
create database ORACLE5
user sys identified by bala
user system identified by bala
logfile
group 1 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo01.log') SIZE 50M,
group 2 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo02.log') SIZE 50M,
group 3 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo03.log') SIZE 50M
maxlogfiles 5
maxlogmembers 5
maxloghistory 1
maxdatafiles 50
maxinstances 1
datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\system01.dbf' size 200m autoextend on maxsize unlimited extent management local
undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
sysaux datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\sysaux01.dbf' size 100m autoextend on maxsize unlimited
default temporary tablespace temp tempfile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\temp01.dbf' size 10m autoextend on maxsize unlimited
character set US7ASCII
NATIONAL CHARACTER SET AL16UTF16
INIT.ORA FILE:-
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Archive
log_archive_format=ARC%S_%R.%T
# Cache and I/O
db_block_size=8192
db_cache_size=25165824
db_file_multiblock_read_count=16
# Cursors and Library Cache
open_cursors=300
# Database Identification
db_domain=""
db_name=oracle5
# Diagnostics and Statistics
background_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\bdump
core_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\cdump
user_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\udump
# File Configuration
#db_create_file_dest=D:\oracle\product\10.1.0\oradata
db_recovery_file_dest=D:\oracle\product\10.1.0\flash_recovery_area
db_recovery_file_dest_size=2147483648
# Job Queues
job_queue_processes=10
# Miscellaneous
compatible=10.1.0.2.0
# Pools
java_pool_size=50331648
large_pool_size=8388608
shared_pool_size=83886080
# Processes and Sessions
processes=150
# Security and Auditing
remote_login_passwordfile=EXCLUSIVE
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=oracle5XDB)"
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=25165824
sort_area_size=65536
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
control_files=("D:\ORACLE\PRODUCT\10.1.0\ORADATA\ORACLE5\CONTROLFILE\control01.CTL", "D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORACLE5\CONTROLFILE\control02.CTL")Hi,
undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
After ORACLE5 there is a space character. Typo? Create proper directory or delete this character.
Bartek -
Hi ,
Am getting ORA-01092 error while upgrading database to 10.2.0.1 from 9.2.0.6
I executed the catupgrd.sql successfully and recompiled invaild objects.
After that i tried to startup the database,but am getting the error:
sql>startup
oracle instance started
database mounted
ORA-01092 : Oracle instance terminated. Disconnection forced
I checked alert log file.
I am getting the following errors
Errors in file /u01/......./udump/VIS_ora/7179.trc
ORA-00604: error occurred at recursive SQL level 1
ORA-00607: internal error occurred while making change to a datablock
ORA-00600: internal error code, arguments [4194],[70] ,[39] [ ] []
Error 604 happened during database open . Shutting down database
instance terminated by USER pid =7179
ORA-01092 error Signaled during alter database open
Is there any block corruption? could u please share the solution for these errors?Hi;
You are hitting ORA-00600: error which mean you may need to work oracle support for your issue.Pelase check below note if its not help i suggest rise sr
Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool [ID 153788.1]
Regard
Helios -
Hello,
I have some problems with dbms_xmlschema.registerschema
My database is: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
My XSD schema is (SEPA pain.002.001.03.xsd) also available on this url: http://code.google.com/p/leontestbed/source/browse/trunk/bc2/sample/Schema/pain.002.001.03.xsd?r=241
After
begin
DOK_XML_UTIL.p_vnesi_xsd_blob(401941242); -- store a XSD on file system from blob field
dbms_xmlschema.registerschema(
schemaurl => 'http://localhost/TEST1.XSD',
schemadoc => bfilename('ETAX_LOAD','TEST1.XSD'),
csid => nls_charset_id('AL32UTF8'));
commit;
end;I get:
ORA-31084: error while creating table "INIS_PROD"."Document2781_TAB" for element "Document"
ORA-02320: failure in creating storage table for nested table column "XMLDATA"."CstmrPmtStsRpt"."OrgnlPmtInfAndSts"
ORA-01792: maximum number of columns in a table or view is 1000
ORA-02310: exceeded maximum number of allowable columns in table
ORA-06512: at "XDB.DBMS_XMLSCHEMA_INT", line 37
ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 65
ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 136
ORA-06512: at line 4
What I'am doing wrong or what is the reason for this error..Arrgghhh.....
begin
DOK_XML_UTIL.p_vnesi_xsd_blob(401941242);
dbms_xmlschema.registerschema(
schemaurl => 'http://localhost/TEST1.XSD',
schemadoc => bfilename('ETAX_LOAD','TEST1.XSD'),
csid => nls_charset_id('AL32UTF8')
, local => true
, genTypes => false
, genTables => false);
commit;
end;sorry...
Maybe you are looking for
-
Can i hook up ethernet and use airplay on Apple tv 3rd gen?
I would like to connect to my apple tv with an ethernet connection for fast networking from my iMac, but would still like to use airplay with iphone and ipad. Is it possible to have both ethernet connected and wifi on at the same time?
-
My computer has been turned off for almost a year. When reconnecting, refreshing, updating, etc, everything that needs to be done on the computer, i come across the problem of firefox acting as though I did not update anything. I've followed all the
-
Do we need an External Content Server to be configured with OLM
Would like to know if an external content server is mandatory for Oracle OLM on R12. I have read notes that Content Servers cannot be hosted on the middle tier of Ebiz but have also been told from other sources that it can be hosted but has some limi
-
Cannot register Analytic Services with Shared Services
Hello, I have installed the following products of System 9.3: - License server and Shared services (everything went OK, I can connect to User Management Console using admin/password ); - Analytic Services; Using Configuration Utlity I activated Analy
-
How to setup MX Records etc at Host
I am new to Leopard server. I have setup using advance a server for my small business (5 employees). to-date we have had a hosted solutions with both Website and Mail hosted by Melbourneit. I have now setup a leopard server and all services are worki