ORA-06550 and PLS-00201 in PL/SQL Developer

Hi all ,
I am facing the following error when i try to view the DDL of a table using pl/sql developer.
( right click on table and then DBMS_Metadata -> DDL)
ORA-06550: line 7, column 5:
PLS-00201: identifier 'SYS.DBMS_LOB' must be declared
ORA-06550: line 7, column 5:
PL/SQL: Statement ignored
ORA-06550: line 12, column 3:
PLS-00201: identifier 'SYS.DBMS_LOB' must be declared
ORA-06550: line 12, column 3:
PL/SQL: Statement ignored
ORA-06550: line 13, column 3:
PLS-00201: identifier 'SYS.DBMS_LOB' must be declared
ORA-06550: line 13, column 3:
PL/SQL: Statement ignoredPlease suggest me what to do ?
regards
Kkukreja

Hi VT ,
When i execute this .. I get this output :
Argument Name                  Type                    In/Out Default?
LOB_LOC                        BLOB                    IN/OUT
NEWLEN                         NUMBER(38)              IN
PROCEDURE TRIM
Argument Name                  Type                    In/Out Default?
LOB_LOC                        CLOB                    IN/OUT
NEWLEN                         NUMBER(38)              IN
PROCEDURE WRITE
Argument Name                  Type                    In/Out Default?
LOB_LOC                        BLOB                    IN/OUT
AMOUNT                         NUMBER(38)              IN
OFFSET                         NUMBER(38)              IN
BUFFER                         RAW                     IN
PROCEDURE WRITE
Argument Name                  Type                    In/Out Default?
LOB_LOC                        CLOB                    IN/OUT
AMOUNT                         NUMBER(38)              IN
OFFSET                         NUMBER(38)              IN
BUFFER                         VARCHAR2                IN
PROCEDURE WRITEAPPEND
Argument Name                  Type                    In/Out Default?
LOB_LOC                        BLOB                    IN/OUT
AMOUNT                         NUMBER(38)              IN
BUFFER                         RAW                     IN
PROCEDURE WRITEAPPEND
Argument Name                  Type                    In/Out Default?
LOB_LOC                        CLOB                    IN/OUT
AMOUNT                         NUMBER(38)              IN
BUFFER                         VARCHAR2                IN.
That means this exists... Tomorrow the database will be undegoing backup and so will shutdown and startup..
So probably on monday I can check if i can login.. becuase I tried to view the same details using TOAD and i faced no errors as such...
So lets wait till monday... if no other solution..
Thanks
Kkukreja

Similar Messages

Error while executing procedure : ORA-06550 and PLS-00103

Hi I have created the Stored Procedure as,
CREATE OR REPLACE PACKAGE BODY APPS.TMP_IMPORT_ITEMS_PKG AS
PROCEDURE LOAD_INTERFACE_TABLE(organization_code IN VARCHAR2, errbuf OUT VARCHAR2, retcode OUT NUMBER) IS
org_code varchar2(3);
BEGIN
    org_code:= organization_code;
    DBMS_OUTPUT.PUT_LINE('Organization Code is...' || org_code);
END LOAD_TABLE;
END TMP_IMPORT_ITEMS_PKG;
And here is the code what i am trying to execute:
DECLARE
V_ERRBUF VARCHAR2(1000);
V_RETCODE NUMBER;
BEGIN
EXEC TMP_IMPORT_ITEMS_PKG.LOAD_INTERFACE_TABLE('x1', V_ERRBUF, V_RETCODE);
END;
when i run the above code i am getting the following error:
ORA-06550: line 5, column 10:
PLS-00103: Encountered the symbol "TMP_IMPORT_ITEMS_PKG" when expecting one of the following:
:= . ( @ % ;
The symbol ":=" was substituted for "TMP_IMPORT_ITEMS_PKG" to continue.
Can any body tell me what's wrong with the above code
Thanks in Advance,
Kumar K
Edited by: user2054206 on Dec 17, 2008 9:09 PM
Edited by: user2054206 on Dec 17, 2008 9:27 PM

BEGIN
EXEC TMP_IMPORT_ITEMS_PKG.LOAD_INTERFACE_TABLE('x1', '', null);
END;why are you executing it like that , it should be
EXEC TMP_IMPORT_ITEMS_PKG.LOAD_INTERFACE_TABLE('x1', '', null);or as Prabhakar said in PL/SQL
BEGIN
     TMP_IMPORT_ITEMS_PKG.LOAD_INTERFACE_TABLE('x1', '', null);
END;Edited by: Rajneesh Kumar on Dec 18, 2008 11:08 AM

JDBC receiver error:ORA-06550: line 1, column 7: PL/SQL

Hi,
I am geting this error in JDBC Receiver adapter. when i call the stored procedure.
Last week it works fine.But i today i faced this error.
Error Unable to execute statement for table or stored procedure. 'spec_utilities.SP_DELETE(Structure 'unassign') due to java.sql.SQLException: ORA-06550: line 1, column 7: PLS-00201: identifier 'SPEC_UTILITIES.SP_DELETE' must be declared ORA-06550: line 1, column 7: PL/SQL: Statement ignored
Error JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'spec_utilities.SP_DELETE(structure 'unassign'): java.sql.SQLException: ORA-06550: line 1, column 7: PLS-00201: identifier 'SPEC_UTILITIES.SP_DELETE' must be declared ORA-06550: line 1, column 7: PL/SQL: Statement ignored
Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'spec_utilities.SP_DELETE (structure 'unassign'): java.sql.SQLException: ORA-06550: line 1, column 7: PLS-00201: identifier 'SPEC_UTILITIES.SP_DELETE'must be declared ORA-06550: line 1, column 7: PL/SQL: Statement ignored
My stored procedure structure is:
<unassign>
<SP_DELETE action="EXECUTE">
<table>spec_utilities.SP_DELETE</table>
<PAE isInput="true" type="VARCHAR">447848</pAEIC>
<SKEY isInput="true" type="NUMERIC">4548545</pSKEY>
<USER isOutput="true" type="VARCHAR" />
<UNIT isOutput="true" type="VARCHAR" />
<EMAIL isOutput="true" type="VARCHAR" />
</SP_DELETE>
</unassign>
Can you suggest me where is this error.
Thank you
Sateesh

Hi,
if it was executing fine earlier then check the below
1. user permissions level at the database..whether it has access to the required SP or not..
2. Check if there was any change in the SP..which has not been communicated...
HTH
Rajesh

ORA-06550: line 1, column 17: PL/SQL: ORA-00936: missing expression ORA-06550: line 1, column 9: PL/SQL: SQL Statement ignored

Here is tthe code:
begin
declare
p varchar2(32767) := null;
l_clob clob;
l_length number := 1;
begin
p:=p||'F|#OWNER#:QS_SPECIFICHHNO:P2_HHNO:HHNO';
wwv_flow_api.create_page_process(
p_id     => 1223125545905315 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_flow_step_id => 2,
p_process_sequence=> 1,
p_process_point=> 'AFTER_SUBMIT',
p_process_type=> 'DML_FETCH_ROW',
p_process_name=> 'Fetch Row from QS_SPECIFICHHNO',
p_process_sql_clob => p,
p_process_error_message=> 'Unable to fetch row.',
p_process_success_message=> '',
p_process_is_stateful_y_n=>'N',
p_runtime_where_clause=>'WHERE ( ( (HHNO) = P2_HHNO ) )',
p_process_comment=>'');
end;
null;
end;
I execute it as follows in SQL Developer:
select * from QS_SPECIFICHHNO
WHERE ( ( (HHNO) = &P2_HHNO ) )
No problem: I receive exactyl one row in my result set which is what I expect.
I think (definitely correct me if I am wrong) Apex is complaining about the following line of code:
p:=p||'F|#OWNER#:QS_SPECIFICHHNO:P2_HHNO:HHNO';
It is complaining about a missing expession line 1 ccolumn 9 -   |#OWNER#:
This is an Automatic Fetch query. P2_HHNO is a simple text field where the user enters a primary key value (Household Number)
The household number is used in the where clause of the QS_SPECIFICHHNO view.
Here is the view:
CREATE OR REPLACE FORCE VIEW "CASETRANS"."QS_SPECIFICHHNO" ("HHNO","CNAME","PDATE","TDATE","AGE","INWORKNO","ONWORKNO","ONCPS","ONYTHSRV","CPA","TMSUCCESS","VOL","D_N","DLQ","TRU","VPA","PA5","PA46","CPC","COOHPA4","COOHPA5","KINPA5","KINPA4","COOH","CKIN") AS
SELECT HHNO,
         CNAME,
         PDate,
         TDate,
         msaccess_utilities.datediff('d', PDate, TDate, 0) Age,
         InWorkNo,
         OnWorkNo,
         OnCPS,
         OnYthSrv,
         CPA,
         TmSuccess,
         Vol,
         D_N,
         DLQ,
         TRU,
         VPA,
         PA5,
         PA46,
         CPC,
         COOHPA4,
         COOHPA5,
         KINPA5,
         KINPA4,
         COOH,
         CKIN
    FROM CaseTransfers
    ORDER BY CaseTransfers.HHNo,
             CaseTransfers.PDate DESC

'F|#OWNER#:QS_SPECIFICHHNO:P2_HHNO:HHNO'
Is perfectly valid, it is an APEX DML string
F = Fetch
#OWNER# = the schema from the workspace
QS_SPECIFICHHNO = the table/view
P2_HHNO = The APEX item to match with the key
HHNO = The key in the table/view
The p_runtime_where_clause appears to be invalid;
a) The "WHERE" keyword is not necessary, also it should be '&P2_HHNO.' not '&P2_HHNO'
b) The record should have already matched using the DML string
Try deleting the runtime_where_clause, it should then work.
regards,

ORA-01041 Error while query in PL/SQl Developer

Hi All,
I am trying to execute a simple select statement in PL/SQL developer. After the query gets executed i am getting a error
ORA-01041 internal error. hostdef extension doesn`t exist.
But when i perform the same query in sqlplus, i do not receive this kinda error.
Does any 1 have a idea on this error?
Regards,
Ritesh Khuller

PL/SQL Developer is a third-party tool and not from oracle.
maybe you have better chances in the rdbms-forum where they know more about hostdef's
PL/SQL
General Database Discussions

ORA-01722 when opening a package in SQL Developer 1.2 with oracle 9iR1

Hi,
I use SQL Developer with Oracle Database 9i release 1.
When I open a package in SQL Developer 1.2 (or 1.5) for editing, I receive the error ORA-01722. The package successfully opens but this message, which pops everytime, is really annoying.
I monitored the requests sent by SQL Developer and it seems that the following request is responsible of the error :
SELECT LINE,POSITION,TEXT,ATTRIBUTE FROM USER_ERRORS WHERE TYPE=:1AND NAME=:2
Notice there are no spaces between ':1' and 'AND'. When executing 'by hand' the request with SQL Developer, it asks for the value of '1AND' bind variable and the value of '2'. Then, it fails to execute with... ORA-01722.
Is it possible to avoid this bug ?
Thank you for your help.

We're doing rolling 2 week releases until production. Expect something new next week.

ORA-00600:6711 When clicking tables in SQL Developer 1.5.1

Hello everyone.
This will be my first time to post something in this forum. I have used SQL Developer for quite sometime already and it has really helped me in my daily tasks. I am looking after multiple databases. I have no problem in moving around in most of them except one. I always encounter this ORA-600 error when I try to click on Tables from the tree on the left-hand side of the screen to list all the tables in the database. The suggested action is to "Report as a bug".
Hope anyone can help with this.

Nobody can help without details...
What DB? What version? Connection details? Can you connect with other tools?
K.

ORA-01427 in C# but not in SQL Developer

Hello everyone!
I have a query that works perfectly when executed from SQL Developer. However, executing the same query from C# gives error ORA-01427.
I am using Oracle.DataAccess.dll version 2.111.6.20, which cannot be changed, because the software is distributed and all users would have to install the new driver.
-- part 1
with
mat_stats
as
(select
t1.nr,
t1.ver,
t4.stat,
count( distinct t4.kom_id) as cnt
from
table1 t1,
table2 t2,
table3 t3,
table4 t4
where
t3.spec_spec_id = t2.spec_id
and t1.man_id = t2.man_man_id
and t4.kom_id = t3.kom_kom_id
group by t1.nr, t1.ver, t4.stat
order by t1.nr, t1.ver, t4.stat )
-- part 2
select distinct
nr,
ver,
-- part 2a
(select cnt from mat_stats xres
where xres.nr=nr
and xres.ver=ver
and stat='OK') as ok_cnt,
-- part 2b
(select cnt from mat_stats xres
where xres.nr=nr
and xres.ver=ver
and stat='TOL') as tol_cnt
from mat_stats
The output from part 1 is
"nr" "ver" "stat" "cnt"
1 5 "NOK" 4
1 5 "TOL" 1
And the output of part2 is (SQL Developer)
"nr" "ver" "ok_cnt" "tol_cnt
1 5 "" 1
What am I doing wrong ? Or is this a known bug ?
Cheers,
Chris

now if the sum is changing the value then I have to ask: are these hitting the same data sources?
let's change the query around a bit and see if you get the same result
try this query
with
mat_stats
as
SELECT 1 NR ,
       5 VER ,
       'NOK' STAT ,
       4 CNT
FROM DUAL
UNION
SELECT 1 NR ,
       5 VER ,
       'TOL' STAT ,
       1 CNT
FROM DUAL
-- part 2
select distinct
nr,
VER,
SUM(CASE STAT WHEN 'OK' THEN CNT ELSE 0 END) OVER() OK_CNT,
SUM(CASE STAT WHEN 'TOL' THEN CNT ELSE 0 END) OVER() tol_cnt
FROM MAT_STATS ;
NR                     VER                    OK_CNT                 TOL_CNT
1                      5                      0                      1                      note I just "faked" your data based on your initial results, so you ought to be able to be able to change the with clause back to yours.
Run a full select in C# and look over the result set (fill a datatable and do a row.count then compare to a full select in Developer and see if the row counts are the same.

Extension.xml and catching compile event in sql developer

Hi,
recently I've been trying to make a few plug-in/extensions for sql developer. One allows you to search through entire schema to find and procedures or functions that utilize any given procedure or function, this one works fine. The second one and the one that is giving me trouble is an extension that allows you to see if any items (procedures, functions,...) are broken, the goal with this one is for it to do this task automatically when a procedure or function is compiled to show if the compilation of the function or procedure broke anything else. I have this one working as a button in the toolbar and choice in the main menu, but I can not for the life of me figure out how to hook it on to a compile or run event. Please help!!!!
here is my extension file so far:
<extension id="brokenSearch" version="1.0" esdk-version="1.0" rsbundle-class="infinTech.brokensearch.Res"
xmlns="http://jcp.org/jsr/198/extension-manifest">
<name>Broken Search</name>
<dependencies>
<import>oracle.jdeveloper.db.connection</import>
<import>oracle.ide</import>
</dependencies>
<trigger-hooks xmlns="http://xmlns.oracle.com/ide/extension">

<triggers>
</triggers>
</trigger-hooks>
<hooks>

<jdeveloper-hook xmlns="http://xmlns.oracle.com/jdeveloper/1013/extension">
<actions>
<action id="infinTech.brokenitems.BrokenItems">
<properties>
<property name="Name">Broken Items</property>
<property name="SmallIcon">${OracleIcons.PLACEHOLDER}</property>
<property name="LongDescription">Broken Items</property>
</properties>
<controller-class>infinTech.brokensearch.ShowMeDatabasePasswordController</controller-class>
<command-class>infinTech.brokensearch.ShowMeDatabasePasswordCommand</command-class>
</action>
</actions>
<context-menu-listeners>
<site idref="navigator">
<listener-class>infinTech.brokensearch.MenuContextMenuListener</listener-class>
</site>
<site idref="editor">
<listener-class>infinTech.brokensearch.MenuContextMenuListener</listener-class>
</site>
<site idref="explorer">
<listener-class>infinTech.brokensearch.MenuContextMenuListener</listener-class>
</site>
</context-menu-listeners>
</jdeveloper-hook>

<menu-hook>
<menus>

<menubar id="javax.ide.view.MAIN_WINDOW_MENUBAR_ID">
<menu id="javax.ide.VIEW_MENU_ID">
<section id="schema.search"
before="javax.ide.NEW_SECTION_ID">
<item action-ref="infinTech.brokenitems.BrokenItems"/>
</section>
</menu>
</menubar>
</menus>
<toolbars>
<toolbar id="javax.ide.view.MAIN_WINDOW_TOOLBAR_ID">
<section id="SCHEMA_SEARCH_SEACTION" weight="2.0">
<item action-ref="infinTech.brokenitems.BrokenItems"/>
</section>
</toolbar>
</toolbars>
</menu-hook>
<feature-hook>
<description>Simple utility that finds any/all broken items.</description>
</feature-hook>
</hooks>
</extension>

Hi,
That's not an XML-specific issue, please see the dedicated forum for SQL Developer : {forum:id=260}

ORA-06550: line 33, column 9: PL/SQL: ORA-00942: table or view does not exi

hi,
I am getting this error during the deployment. But whatever tables i have used for doing mappings in the mapping editor, those tables are existing in the database. Source and target database is same in my project. please assist on this.
Thanks,
Kuamr

Hi mandi,
Thanks for your assistance. And after deploying into runtime repository,mapping is deployed with the following error.
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
If you have any idea on this, please assist.
thanks,
kumar

Sharts and graphs with Dataminer in SQL DEVELOPER

How can I view the results of my worklofw diagrams in SQL Developer

Right click on the build model node and then select View Models from the menu. You will get a list of the models that were build. Select one of these and you can then see the details of the model. For example if you select the Decision Tree model, you will see the decision tree etc

ORA-06550/PLS-00201 error while configuring data source

Hi,
My development platform is Visual Studio 2005, ODAC11g Release 1 (11.1.0.6.20), and Oracle 10g Release 2 database.
I tried to setup a sqlDatasource in my web page using drag and drop features
When I configure the sqlDatasource to use a stored procedure inside a package,
I notice that odp.net uses #0# as separator (instead of .) between package name and procedure name in Configure Data Source dialog box. Then when I clcik the Test Query button, I got following error.
There was an error executing the query. Please check the syntax of the command and if present, the types and values of the parameters and ensure they are correct.
ORA-06550: line 1, column 7:
PLS-00201: identifier 'PK_LOOKUP_TABLE#0#P_LIST' must be declared
ORA-06550: line 1, column 7
PL/SQL: Statement ignored
It looks like odp.net cannot locate PK_LOOKUP_TABLE#0#P_LIST.
Is there any workaround ?
Below is the stored procedure code. It compiles and runs without problem.
PACKAGE BODY pk_lookup_table
AS
/* Get a list of lookup table name */
PROCEDURE P_LIST (
O_CURSOR OUT sys_refcursor )
IS
l_cur sys_refcursor;
BEGIN -- executable part starts here
OPEN l_cur FOR
SELECT table_name
FROM all_tab_comments u
WHERE u.comments LIKE '%Lookup Table%'
ORDER BY 1;
o_cursor := l_cur;
END P_LIST;
END "PK_LOOKUP_TABLE";
On the sqlDataSource property sheet, if I click the Select Query property, the Command and Parameter Editor will open, then I can change the select command name to PK_LOOKUP_TABLE.P_LIST. Then if I run the application, I get another error.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Oracle.DataAccess.Client.OracleException: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'P_LIST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Seems that it can locate the procedure.
In the Command and Parameter Editor dialog, I can add output parameter, but data type is restricted. There is no REF CURSOR datatype in the dropdown list.
How can I add output parameter with REF CURSOR type via IDE ?
Thanks for the time looking into this issue.
Mansion

Hi
Even I faced this problem while connecting to RMAN . But I feel your problem is different .
My issue was like this
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-06550: line 1, column 7:
PLS-00201: identifier 'DBMS_BACKUP_RESTORE.SET_CHARSET' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
RMAN-04015: error setting target database character set to WE8MSWIN1252
Solution :
execute catproc.sql;

PLS-00201 error occurs when batching a stored procedure in SQL*Plus

I have a batch file to run a stored procedure and spool the results to file. When I enter the commands manually in sql*plus the output works fine and my results are spooled to the output file. But when I run the same commands in the batched script I get an error.
Any ideas?
Stored Procedure:
create or replace procedure MMP( p_cursor in out SYS_REFCURSOR)
as
begin
open p_cursorfor select name, id from table;
end;
batch file 1:
sqlplus -S user/pw@REPORTDV @sp_output_spooled.sql
script file sp_output_spooled.sql
Pasting these commands directly to the SQL*Plus command prompt spools the result set to file as expected.
set colsep '|'
set echo off
set feedback off
set termout off
set heading off
set linesize 9000
set pagesize 0
set trimspool on
set headsep off
spool output.TXT
var rc refcursor
execute MMP(:rc)
print rc
spool off
exit
The errors printed to output.TXT file after the batch is run and error occurs:
BEGIN MMP(:rc); END;
ERROR at line 1:
ORA-06550: line 1, column 8:
PLS-00201: identifier 'MMP' must be declared
ORA-06550: line 1, column 8:
PL/SQL: Statement ignored
ERROR:
ORA-24338: statement handle not executed
SP2-0625: Error printing variable "rc"

Hi,
Your code worked fine for me.
Is MMP procedure owned by the same user that is running the batch file or does it have proper privileges and synonym?
vr,
Sudhakar

ORA 0655, PLS 00201 identifier sys.dbms_repcat_utl2@tdr1.world

I have created a repgroup CAROLINE and I get an error when I try to add a master site to it.The master definition site is on v 8.1.7.0.0.(tammy sid) and the master site (pony sid) on v 8.0.6.3.0.
The error I get is :
ORA-06550: line 1, column 7:
PLS-00201: identifier '[email protected]' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
ORA-06512: at "SYS.DBMS_REPCAT_UTL4", line 2683
ORA-06512: at "SYS.DBMS_REPCAT_UTL4", line 2377
ORA-06512: at "SYS.DBMS_REPCAT_MAS", line 2039
ORA-06512: at "SYS.DBMS_REPCAT", line 556
ORA-06512: at line 1
I've followed the steps on the metalink doc 117434.1 to setup the replication user.
I have checked all the objects,they exist and are valid. I I get the same error when I try to remove the group or purge administrative requests from the master site. The group is only removed from the master definition site.
I have tried tested the database links and simulated this problem on another 817 db (dandy sid) as the master definition site to the same 8.0.6.3.0 (pony sid)master site and this test worked!
So I can only conclude that there's something wrong on the other 817 db (tammy).

Is there an Oracle version number anywhere in sight?
Why are you trying to access a built-in package owned by SYS across a DB Link rather than using the local copy?
Advanced (choke) Replication is a deprecated technology. Why aren't you using Streams?

Help on ORA-06550 & PLS-00363 Error while running a procedure from a packag

Greeting All,
I ran the following procedure from a package on a command line in sqlplus:
SQL> exec QUALITY_ASSURANCE.COPY_SW_RESOURCES(2009,2010,9508);Where '2009' is the old fiscal year, '2010' is the new fiscal year and '9508' is the error code passed from the calling program. But, I received the following error messages:
ERROR at line 1:
ORA-06550: line 1, column 53:
PLS-00363: expression '9508' cannot be used as an assignment target
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Any thoughts, suggestions and/or advice to resolve these errors.
Thanks in advance.

Orchid wrote:
Justin,
Thanks for your response and information. Yes, Theoa was correct the 3rd parameter is an OUT variable, and it is a numeric field. The procedure was called by a form as follows:
QUALITY_ASSURANCE.COPY_SW_RESOURCES(:BLK_CONTROL.FROMFY,:BLK_CONTROL.TOFY,V_ERR);But the form does not work so I am trying to isolate the problem by running the procedure by itself in sqlplus to make sure there is no problem with the procedure.
Yesterday, I was able to run the procedure in Toad for Oracle to a successful completion by providing the 3 parameters: (2009, 2010, null). Just wonder why I cannot run the same procedure with the same parameters on a command line in sqlplus as follows:
exec QUALITY_ASSURANCE.COPY_SW_RESOURCES(2009,2010,null);So, if I understand your suggestion correctly, in order to run the procedure with the 3 parameter successfully in sqlplus,
I have to declare the 3rd parameter in PL/SQL. That is to create a PL/SQL file as suggested and run the file, correct? CORRECT!

ORA-06550 and PLS-00201 in PL/SQL Developer

Similar Messages

Maybe you are looking for